Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 553 insertions, 0 deletions

diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
new file mode 100644
index 000000000..3c38b0cb8
--- /dev/null
+++ b/drivers/thunderbolt/tb_regs.h
@@ -0,0 +1,553 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Thunderbolt driver - Port/Switch config area registers
+ *
+ * Every thunderbolt device consists (logically) of a switch with multiple
+ * ports. Every port contains up to four config regions (HOPS, PORT, SWITCH,
+ * COUNTERS) which are used to configure the device.
+ *
+ * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
+ * Copyright (C) 2018, Intel Corporation
+ */
+
+#ifndef _TB_REGS
+#define _TB_REGS
+
+#include <linux/types.h>
+
+
+#define TB_ROUTE_SHIFT 8  /* number of bits in a port entry of a route */
+
+
+/*
+ * TODO: should be 63? But we do not know how to receive frames larger than 256
+ * bytes at the frame level. (header + checksum = 16, 60*4 = 240)
+ */
+#define TB_MAX_CONFIG_RW_LENGTH 60
+
+enum tb_switch_cap {
+	TB_SWITCH_CAP_TMU		= 0x03,
+	TB_SWITCH_CAP_VSE		= 0x05,
+};
+
+enum tb_switch_vse_cap {
+	TB_VSE_CAP_PLUG_EVENTS		= 0x01, /* also EEPROM */
+	TB_VSE_CAP_TIME2		= 0x03,
+	TB_VSE_CAP_CP_LP		= 0x04,
+	TB_VSE_CAP_LINK_CONTROLLER	= 0x06, /* also IECS */
+};
+
+enum tb_port_cap {
+	TB_PORT_CAP_PHY			= 0x01,
+	TB_PORT_CAP_POWER		= 0x02,
+	TB_PORT_CAP_TIME1		= 0x03,
+	TB_PORT_CAP_ADAP		= 0x04,
+	TB_PORT_CAP_VSE			= 0x05,
+	TB_PORT_CAP_USB4		= 0x06,
+};
+
+enum tb_port_state {
+	TB_PORT_DISABLED	= 0, /* tb_cap_phy.disable == 1 */
+	TB_PORT_CONNECTING	= 1, /* retry */
+	TB_PORT_UP		= 2,
+	TB_PORT_UNPLUGGED	= 7,
+};
+
+/* capability headers */
+
+struct tb_cap_basic {
+	u8 next;
+	/* enum tb_cap cap:8; prevent "narrower than values of its type" */
+	u8 cap; /* if cap == 0x05 then we have a extended capability */
+} __packed;
+
+/**
+ * struct tb_cap_extended_short - Switch extended short capability
+ * @next: Pointer to the next capability. If @next and @length are zero
+ *	  then we have a long cap.
+ * @cap: Base capability ID (see &enum tb_switch_cap)
+ * @vsec_id: Vendor specific capability ID (see &enum switch_vse_cap)
+ * @length: Length of this capability
+ */
+struct tb_cap_extended_short {
+	u8 next;
+	u8 cap;
+	u8 vsec_id;
+	u8 length;
+} __packed;
+
+/**
+ * struct tb_cap_extended_long - Switch extended long capability
+ * @zero1: This field should be zero
+ * @cap: Base capability ID (see &enum tb_switch_cap)
+ * @vsec_id: Vendor specific capability ID (see &enum switch_vse_cap)
+ * @zero2: This field should be zero
+ * @next: Pointer to the next capability
+ * @length: Length of this capability
+ */
+struct tb_cap_extended_long {
+	u8 zero1;
+	u8 cap;
+	u8 vsec_id;
+	u8 zero2;
+	u16 next;
+	u16 length;
+} __packed;
+
+/**
+ * struct tb_cap_any - Structure capable of hold every capability
+ * @basic: Basic capability
+ * @extended_short: Vendor specific capability
+ * @extended_long: Vendor specific extended capability
+ */
+struct tb_cap_any {
+	union {
+		struct tb_cap_basic basic;
+		struct tb_cap_extended_short extended_short;
+		struct tb_cap_extended_long extended_long;
+	};
+} __packed;
+
+/* capabilities */
+
+struct tb_cap_link_controller {
+	struct tb_cap_extended_long cap_header;
+	u32 count:4; /* number of link controllers */
+	u32 unknown1:4;
+	u32 base_offset:8; /*
+			    * offset (into this capability) of the configuration
+			    * area of the first link controller
+			    */
+	u32 length:12; /* link controller configuration area length */
+	u32 unknown2:4; /* TODO check that length is correct */
+} __packed;
+
+struct tb_cap_phy {
+	struct tb_cap_basic cap_header;
+	u32 unknown1:16;
+	u32 unknown2:14;
+	bool disable:1;
+	u32 unknown3:11;
+	enum tb_port_state state:4;
+	u32 unknown4:2;
+} __packed;
+
+struct tb_eeprom_ctl {
+	bool fl_sk:1; /* send pulse to transfer one bit */
+	bool fl_cs:1; /* set to 0 before access */
+	bool fl_di:1; /* to eeprom */
+	bool fl_do:1; /* from eeprom */
+	bool bit_banging_enable:1; /* set to 1 before access */
+	bool not_present:1; /* should be 0 */
+	bool unknown1:1;
+	bool present:1; /* should be 1 */
+	u32 unknown2:24;
+} __packed;
+
+struct tb_cap_plug_events {
+	struct tb_cap_extended_short cap_header;
+	u32 __unknown1:2; /* VSC_CS_1 */
+	u32 plug_events:5; /* VSC_CS_1 */
+	u32 __unknown2:25; /* VSC_CS_1 */
+	u32 vsc_cs_2;
+	u32 vsc_cs_3;
+	struct tb_eeprom_ctl eeprom_ctl;
+	u32 __unknown5[7]; /* VSC_CS_5 -> VSC_CS_11 */
+	u32 drom_offset; /* VSC_CS_12: 32 bit register, but eeprom addresses are 16 bit */
+} __packed;
+
+/* device headers */
+
+/* Present on port 0 in TB_CFG_SWITCH at address zero. */
+struct tb_regs_switch_header {
+	/* DWORD 0 */
+	u16 vendor_id;
+	u16 device_id;
+	/* DWORD 1 */
+	u32 first_cap_offset:8;
+	u32 upstream_port_number:6;
+	u32 max_port_number:6;
+	u32 depth:3;
+	u32 __unknown1:1;
+	u32 revision:8;
+	/* DWORD 2 */
+	u32 route_lo;
+	/* DWORD 3 */
+	u32 route_hi:31;
+	bool enabled:1;
+	/* DWORD 4 */
+	u32 plug_events_delay:8; /*
+				  * RW, pause between plug events in
+				  * milliseconds. Writing 0x00 is interpreted
+				  * as 255ms.
+				  */
+	u32 cmuv:8;
+	u32 __unknown4:8;
+	u32 thunderbolt_version:8;
+} __packed;
+
+/* USB4 version 1.0 */
+#define USB4_VERSION_1_0			0x20
+
+#define ROUTER_CS_1				0x01
+#define ROUTER_CS_4				0x04
+#define ROUTER_CS_5				0x05
+#define ROUTER_CS_5_SLP				BIT(0)
+#define ROUTER_CS_5_WOP				BIT(1)
+#define ROUTER_CS_5_WOU				BIT(2)
+#define ROUTER_CS_5_WOD				BIT(3)
+#define ROUTER_CS_5_C3S				BIT(23)
+#define ROUTER_CS_5_PTO				BIT(24)
+#define ROUTER_CS_5_UTO				BIT(25)
+#define ROUTER_CS_5_HCO				BIT(26)
+#define ROUTER_CS_5_CV				BIT(31)
+#define ROUTER_CS_6				0x06
+#define ROUTER_CS_6_SLPR			BIT(0)
+#define ROUTER_CS_6_TNS				BIT(1)
+#define ROUTER_CS_6_WOPS			BIT(2)
+#define ROUTER_CS_6_WOUS			BIT(3)
+#define ROUTER_CS_6_HCI				BIT(18)
+#define ROUTER_CS_6_CR				BIT(25)
+#define ROUTER_CS_7				0x07
+#define ROUTER_CS_9				0x09
+#define ROUTER_CS_25				0x19
+#define ROUTER_CS_26				0x1a
+#define ROUTER_CS_26_OPCODE_MASK		GENMASK(15, 0)
+#define ROUTER_CS_26_STATUS_MASK		GENMASK(29, 24)
+#define ROUTER_CS_26_STATUS_SHIFT		24
+#define ROUTER_CS_26_ONS			BIT(30)
+#define ROUTER_CS_26_OV				BIT(31)
+
+/* USB4 router operations opcodes */
+enum usb4_switch_op {
+	USB4_SWITCH_OP_QUERY_DP_RESOURCE = 0x10,
+	USB4_SWITCH_OP_ALLOC_DP_RESOURCE = 0x11,
+	USB4_SWITCH_OP_DEALLOC_DP_RESOURCE = 0x12,
+	USB4_SWITCH_OP_NVM_WRITE = 0x20,
+	USB4_SWITCH_OP_NVM_AUTH = 0x21,
+	USB4_SWITCH_OP_NVM_READ = 0x22,
+	USB4_SWITCH_OP_NVM_SET_OFFSET = 0x23,
+	USB4_SWITCH_OP_DROM_READ = 0x24,
+	USB4_SWITCH_OP_NVM_SECTOR_SIZE = 0x25,
+	USB4_SWITCH_OP_BUFFER_ALLOC = 0x33,
+};
+
+/* Router TMU configuration */
+#define TMU_RTR_CS_0				0x00
+#define TMU_RTR_CS_0_FREQ_WIND_MASK		GENMASK(26, 16)
+#define TMU_RTR_CS_0_TD				BIT(27)
+#define TMU_RTR_CS_0_UCAP			BIT(30)
+#define TMU_RTR_CS_1				0x01
+#define TMU_RTR_CS_1_LOCAL_TIME_NS_MASK		GENMASK(31, 16)
+#define TMU_RTR_CS_1_LOCAL_TIME_NS_SHIFT	16
+#define TMU_RTR_CS_2				0x02
+#define TMU_RTR_CS_3				0x03
+#define TMU_RTR_CS_3_LOCAL_TIME_NS_MASK		GENMASK(15, 0)
+#define TMU_RTR_CS_3_TS_PACKET_INTERVAL_MASK	GENMASK(31, 16)
+#define TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT	16
+#define TMU_RTR_CS_15				0xf
+#define TMU_RTR_CS_15_FREQ_AVG_MASK		GENMASK(5, 0)
+#define TMU_RTR_CS_15_DELAY_AVG_MASK		GENMASK(11, 6)
+#define TMU_RTR_CS_15_OFFSET_AVG_MASK		GENMASK(17, 12)
+#define TMU_RTR_CS_15_ERROR_AVG_MASK		GENMASK(23, 18)
+#define TMU_RTR_CS_22				0x16
+#define TMU_RTR_CS_24				0x18
+#define TMU_RTR_CS_25				0x19
+
+enum tb_port_type {
+	TB_TYPE_INACTIVE	= 0x000000,
+	TB_TYPE_PORT		= 0x000001,
+	TB_TYPE_NHI		= 0x000002,
+	/* TB_TYPE_ETHERNET	= 0x020000, lower order bits are not known */
+	/* TB_TYPE_SATA		= 0x080000, lower order bits are not known */
+	TB_TYPE_DP_HDMI_IN	= 0x0e0101,
+	TB_TYPE_DP_HDMI_OUT	= 0x0e0102,
+	TB_TYPE_PCIE_DOWN	= 0x100101,
+	TB_TYPE_PCIE_UP		= 0x100102,
+	TB_TYPE_USB3_DOWN	= 0x200101,
+	TB_TYPE_USB3_UP		= 0x200102,
+};
+
+/* Present on every port in TB_CF_PORT at address zero. */
+struct tb_regs_port_header {
+	/* DWORD 0 */
+	u16 vendor_id;
+	u16 device_id;
+	/* DWORD 1 */
+	u32 first_cap_offset:8;
+	u32 max_counters:11;
+	u32 counters_support:1;
+	u32 __unknown1:4;
+	u32 revision:8;
+	/* DWORD 2 */
+	enum tb_port_type type:24;
+	u32 thunderbolt_version:8;
+	/* DWORD 3 */
+	u32 __unknown2:20;
+	u32 port_number:6;
+	u32 __unknown3:6;
+	/* DWORD 4 */
+	u32 nfc_credits;
+	/* DWORD 5 */
+	u32 max_in_hop_id:11;
+	u32 max_out_hop_id:11;
+	u32 __unknown4:10;
+	/* DWORD 6 */
+	u32 __unknown5;
+	/* DWORD 7 */
+	u32 __unknown6;
+
+} __packed;
+
+/* Basic adapter configuration registers */
+#define ADP_CS_4				0x04
+#define ADP_CS_4_NFC_BUFFERS_MASK		GENMASK(9, 0)
+#define ADP_CS_4_TOTAL_BUFFERS_MASK		GENMASK(29, 20)
+#define ADP_CS_4_TOTAL_BUFFERS_SHIFT		20
+#define ADP_CS_4_LCK				BIT(31)
+#define ADP_CS_5				0x05
+#define ADP_CS_5_LCA_MASK			GENMASK(28, 22)
+#define ADP_CS_5_LCA_SHIFT			22
+#define ADP_CS_5_DHP				BIT(31)
+
+/* TMU adapter registers */
+#define TMU_ADP_CS_3				0x03
+#define TMU_ADP_CS_3_UDM			BIT(29)
+#define TMU_ADP_CS_6				0x06
+#define TMU_ADP_CS_6_DTS			BIT(1)
+
+/* Lane adapter registers */
+#define LANE_ADP_CS_0				0x00
+#define LANE_ADP_CS_0_SUPPORTED_SPEED_MASK	GENMASK(19, 16)
+#define LANE_ADP_CS_0_SUPPORTED_SPEED_SHIFT	16
+#define LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK	GENMASK(25, 20)
+#define LANE_ADP_CS_0_SUPPORTED_WIDTH_SHIFT	20
+#define LANE_ADP_CS_0_SUPPORTED_WIDTH_DUAL	0x2
+#define LANE_ADP_CS_0_CL0S_SUPPORT		BIT(26)
+#define LANE_ADP_CS_0_CL1_SUPPORT		BIT(27)
+#define LANE_ADP_CS_0_CL2_SUPPORT		BIT(28)
+#define LANE_ADP_CS_1				0x01
+#define LANE_ADP_CS_1_TARGET_SPEED_MASK		GENMASK(3, 0)
+#define LANE_ADP_CS_1_TARGET_SPEED_GEN3		0xc
+#define LANE_ADP_CS_1_TARGET_WIDTH_MASK		GENMASK(9, 4)
+#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT	4
+#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE	0x1
+#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL		0x3
+#define LANE_ADP_CS_1_CL0S_ENABLE		BIT(10)
+#define LANE_ADP_CS_1_CL1_ENABLE		BIT(11)
+#define LANE_ADP_CS_1_CL2_ENABLE		BIT(12)
+#define LANE_ADP_CS_1_LD			BIT(14)
+#define LANE_ADP_CS_1_LB			BIT(15)
+#define LANE_ADP_CS_1_CURRENT_SPEED_MASK	GENMASK(19, 16)
+#define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT	16
+#define LANE_ADP_CS_1_CURRENT_SPEED_GEN2	0x8
+#define LANE_ADP_CS_1_CURRENT_SPEED_GEN3	0x4
+#define LANE_ADP_CS_1_CURRENT_WIDTH_MASK	GENMASK(25, 20)
+#define LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT	20
+#define LANE_ADP_CS_1_PMS			BIT(30)
+
+/* USB4 port registers */
+#define PORT_CS_1				0x01
+#define PORT_CS_1_LENGTH_SHIFT			8
+#define PORT_CS_1_TARGET_MASK			GENMASK(18, 16)
+#define PORT_CS_1_TARGET_SHIFT			16
+#define PORT_CS_1_RETIMER_INDEX_SHIFT		20
+#define PORT_CS_1_WNR_WRITE			BIT(24)
+#define PORT_CS_1_NR				BIT(25)
+#define PORT_CS_1_RC				BIT(26)
+#define PORT_CS_1_PND				BIT(31)
+#define PORT_CS_2				0x02
+#define PORT_CS_18				0x12
+#define PORT_CS_18_BE				BIT(8)
+#define PORT_CS_18_TCM				BIT(9)
+#define PORT_CS_18_CPS				BIT(10)
+#define PORT_CS_18_WOCS				BIT(16)
+#define PORT_CS_18_WODS				BIT(17)
+#define PORT_CS_18_WOU4S			BIT(18)
+#define PORT_CS_19				0x13
+#define PORT_CS_19_PC				BIT(3)
+#define PORT_CS_19_PID				BIT(4)
+#define PORT_CS_19_WOC				BIT(16)
+#define PORT_CS_19_WOD				BIT(17)
+#define PORT_CS_19_WOU4				BIT(18)
+
+/* Display Port adapter registers */
+#define ADP_DP_CS_0				0x00
+#define ADP_DP_CS_0_VIDEO_HOPID_MASK		GENMASK(26, 16)
+#define ADP_DP_CS_0_VIDEO_HOPID_SHIFT		16
+#define ADP_DP_CS_0_AE				BIT(30)
+#define ADP_DP_CS_0_VE				BIT(31)
+#define ADP_DP_CS_1_AUX_TX_HOPID_MASK		GENMASK(10, 0)
+#define ADP_DP_CS_1_AUX_RX_HOPID_MASK		GENMASK(21, 11)
+#define ADP_DP_CS_1_AUX_RX_HOPID_SHIFT		11
+#define ADP_DP_CS_2				0x02
+#define ADP_DP_CS_2_HDP				BIT(6)
+#define ADP_DP_CS_3				0x03
+#define ADP_DP_CS_3_HDPC			BIT(9)
+#define DP_LOCAL_CAP				0x04
+#define DP_REMOTE_CAP				0x05
+#define DP_STATUS_CTRL				0x06
+#define DP_STATUS_CTRL_CMHS			BIT(25)
+#define DP_STATUS_CTRL_UF			BIT(26)
+#define DP_COMMON_CAP				0x07
+/*
+ * DP_COMMON_CAP offsets work also for DP_LOCAL_CAP and DP_REMOTE_CAP
+ * with exception of DPRX done.
+ */
+#define DP_COMMON_CAP_RATE_MASK			GENMASK(11, 8)
+#define DP_COMMON_CAP_RATE_SHIFT		8
+#define DP_COMMON_CAP_RATE_RBR			0x0
+#define DP_COMMON_CAP_RATE_HBR			0x1
+#define DP_COMMON_CAP_RATE_HBR2			0x2
+#define DP_COMMON_CAP_RATE_HBR3			0x3
+#define DP_COMMON_CAP_LANES_MASK		GENMASK(14, 12)
+#define DP_COMMON_CAP_LANES_SHIFT		12
+#define DP_COMMON_CAP_1_LANE			0x0
+#define DP_COMMON_CAP_2_LANES			0x1
+#define DP_COMMON_CAP_4_LANES			0x2
+#define DP_COMMON_CAP_LTTPR_NS			BIT(27)
+#define DP_COMMON_CAP_DPRX_DONE			BIT(31)
+
+/* PCIe adapter registers */
+#define ADP_PCIE_CS_0				0x00
+#define ADP_PCIE_CS_0_PE			BIT(31)
+
+/* USB adapter registers */
+#define ADP_USB3_CS_0				0x00
+#define ADP_USB3_CS_0_V				BIT(30)
+#define ADP_USB3_CS_0_PE			BIT(31)
+#define ADP_USB3_CS_1				0x01
+#define ADP_USB3_CS_1_CUBW_MASK			GENMASK(11, 0)
+#define ADP_USB3_CS_1_CDBW_MASK			GENMASK(23, 12)
+#define ADP_USB3_CS_1_CDBW_SHIFT		12
+#define ADP_USB3_CS_1_HCA			BIT(31)
+#define ADP_USB3_CS_2				0x02
+#define ADP_USB3_CS_2_AUBW_MASK			GENMASK(11, 0)
+#define ADP_USB3_CS_2_ADBW_MASK			GENMASK(23, 12)
+#define ADP_USB3_CS_2_ADBW_SHIFT		12
+#define ADP_USB3_CS_2_CMR			BIT(31)
+#define ADP_USB3_CS_3				0x03
+#define ADP_USB3_CS_3_SCALE_MASK		GENMASK(5, 0)
+#define ADP_USB3_CS_4				0x04
+#define ADP_USB3_CS_4_ALR_MASK			GENMASK(6, 0)
+#define ADP_USB3_CS_4_ALR_20G			0x1
+#define ADP_USB3_CS_4_ULV			BIT(7)
+#define ADP_USB3_CS_4_MSLR_MASK			GENMASK(18, 12)
+#define ADP_USB3_CS_4_MSLR_SHIFT		12
+#define ADP_USB3_CS_4_MSLR_20G			0x1
+
+/* Hop register from TB_CFG_HOPS. 8 byte per entry. */
+struct tb_regs_hop {
+	/* DWORD 0 */
+	u32 next_hop:11; /*
+			  * hop to take after sending the packet through
+			  * out_port (on the incoming port of the next switch)
+			  */
+	u32 out_port:6; /* next port of the path (on the same switch) */
+	u32 initial_credits:8;
+	u32 unknown1:6; /* set to zero */
+	bool enable:1;
+
+	/* DWORD 1 */
+	u32 weight:4;
+	u32 unknown2:4; /* set to zero */
+	u32 priority:3;
+	bool drop_packages:1;
+	u32 counter:11; /* index into TB_CFG_COUNTERS on this port */
+	bool counter_enable:1;
+	bool ingress_fc:1;
+	bool egress_fc:1;
+	bool ingress_shared_buffer:1;
+	bool egress_shared_buffer:1;
+	bool pending:1;
+	u32 unknown3:3; /* set to zero */
+} __packed;
+
+/* TMU Thunderbolt 3 registers */
+#define TB_TIME_VSEC_3_CS_9			0x9
+#define TB_TIME_VSEC_3_CS_9_TMU_OBJ_MASK	GENMASK(17, 16)
+#define TB_TIME_VSEC_3_CS_26			0x1a
+#define TB_TIME_VSEC_3_CS_26_TD			BIT(22)
+
+/*
+ * Used for Titan Ridge only. Bits are part of the same register: TMU_ADP_CS_6
+ * (see above) as in USB4 spec, but these specific bits used for Titan Ridge
+ * only and reserved in USB4 spec.
+ */
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK	GENMASK(3, 2)
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_CL1	BIT(2)
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_CL2	BIT(3)
+
+/* Plug Events registers */
+#define TB_PLUG_EVENTS_USB_DISABLE		BIT(2)
+#define TB_PLUG_EVENTS_CS_1_LANE_DISABLE	BIT(3)
+#define TB_PLUG_EVENTS_CS_1_DPOUT_DISABLE	BIT(4)
+#define TB_PLUG_EVENTS_CS_1_LOW_DPIN_DISABLE	BIT(5)
+#define TB_PLUG_EVENTS_CS_1_HIGH_DPIN_DISABLE	BIT(6)
+
+#define TB_PLUG_EVENTS_PCIE_WR_DATA		0x1b
+#define TB_PLUG_EVENTS_PCIE_CMD			0x1c
+#define TB_PLUG_EVENTS_PCIE_CMD_DW_OFFSET_MASK	GENMASK(9, 0)
+#define TB_PLUG_EVENTS_PCIE_CMD_BR_SHIFT	10
+#define TB_PLUG_EVENTS_PCIE_CMD_BR_MASK		GENMASK(17, 10)
+#define TB_PLUG_EVENTS_PCIE_CMD_RD_WR_MASK	BIT(21)
+#define TB_PLUG_EVENTS_PCIE_CMD_WR		0x1
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_SHIFT	22
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_MASK	GENMASK(24, 22)
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_VAL	0x2
+#define TB_PLUG_EVENTS_PCIE_CMD_REQ_ACK_MASK	BIT(30)
+#define TB_PLUG_EVENTS_PCIE_CMD_TIMEOUT_MASK	BIT(31)
+#define TB_PLUG_EVENTS_PCIE_CMD_RD_DATA		0x1d
+
+/* CP Low Power registers */
+#define TB_LOW_PWR_C1_CL1			0x1
+#define TB_LOW_PWR_C1_CL1_OBJ_MASK		GENMASK(4, 1)
+#define TB_LOW_PWR_C1_CL2_OBJ_MASK		GENMASK(4, 1)
+#define TB_LOW_PWR_C1_PORT_A_MASK		GENMASK(2, 1)
+#define TB_LOW_PWR_C0_PORT_B_MASK		GENMASK(4, 3)
+#define TB_LOW_PWR_C3_CL1			0x3
+
+/* Common link controller registers */
+#define TB_LC_DESC				0x02
+#define TB_LC_DESC_NLC_MASK			GENMASK(3, 0)
+#define TB_LC_DESC_SIZE_SHIFT			8
+#define TB_LC_DESC_SIZE_MASK			GENMASK(15, 8)
+#define TB_LC_DESC_PORT_SIZE_SHIFT		16
+#define TB_LC_DESC_PORT_SIZE_MASK		GENMASK(27, 16)
+#define TB_LC_FUSE				0x03
+#define TB_LC_SNK_ALLOCATION			0x10
+#define TB_LC_SNK_ALLOCATION_SNK0_MASK		GENMASK(3, 0)
+#define TB_LC_SNK_ALLOCATION_SNK0_CM		0x1
+#define TB_LC_SNK_ALLOCATION_SNK1_SHIFT		4
+#define TB_LC_SNK_ALLOCATION_SNK1_MASK		GENMASK(7, 4)
+#define TB_LC_SNK_ALLOCATION_SNK1_CM		0x1
+#define TB_LC_POWER				0x740
+
+/* Link controller registers */
+#define TB_LC_CS_42				0x2a
+#define TB_LC_CS_42_USB_PLUGGED			BIT(31)
+
+#define TB_LC_PORT_ATTR				0x8d
+#define TB_LC_PORT_ATTR_BE			BIT(12)
+
+#define TB_LC_SX_CTRL				0x96
+#define TB_LC_SX_CTRL_WOC			BIT(1)
+#define TB_LC_SX_CTRL_WOD			BIT(2)
+#define TB_LC_SX_CTRL_WODPC			BIT(3)
+#define TB_LC_SX_CTRL_WODPD			BIT(4)
+#define TB_LC_SX_CTRL_WOU4			BIT(5)
+#define TB_LC_SX_CTRL_WOP			BIT(6)
+#define TB_LC_SX_CTRL_L1C			BIT(16)
+#define TB_LC_SX_CTRL_L1D			BIT(17)
+#define TB_LC_SX_CTRL_L2C			BIT(20)
+#define TB_LC_SX_CTRL_L2D			BIT(21)
+#define TB_LC_SX_CTRL_SLI			BIT(29)
+#define TB_LC_SX_CTRL_UPSTREAM			BIT(30)
+#define TB_LC_SX_CTRL_SLP			BIT(31)
+#define TB_LC_LINK_ATTR				0x97
+#define TB_LC_LINK_ATTR_CPS			BIT(18)
+
+#define TB_LC_LINK_REQ				0xad
+#define TB_LC_LINK_REQ_XHCI_CONNECT		BIT(31)
+
+#endif