Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 611 insertions, 0 deletions

diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
new file mode 100644
index 000000000..44988a294
--- /dev/null
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Socionext Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#define USIO_NAME		"mlb-usio-uart"
+#define USIO_UART_DEV_NAME	"ttyUSI"
+
+static struct uart_port mlb_usio_ports[CONFIG_SERIAL_MILBEAUT_USIO_PORTS];
+
+#define RX	0
+#define TX	1
+static int mlb_usio_irq[CONFIG_SERIAL_MILBEAUT_USIO_PORTS][2];
+
+#define MLB_USIO_REG_SMR		0
+#define MLB_USIO_REG_SCR		1
+#define MLB_USIO_REG_ESCR		2
+#define MLB_USIO_REG_SSR		3
+#define MLB_USIO_REG_DR			4
+#define MLB_USIO_REG_BGR		6
+#define MLB_USIO_REG_FCR		12
+#define MLB_USIO_REG_FBYTE		14
+
+#define MLB_USIO_SMR_SOE		BIT(0)
+#define MLB_USIO_SMR_SBL		BIT(3)
+#define MLB_USIO_SCR_TXE		BIT(0)
+#define MLB_USIO_SCR_RXE		BIT(1)
+#define MLB_USIO_SCR_TBIE		BIT(2)
+#define MLB_USIO_SCR_TIE		BIT(3)
+#define MLB_USIO_SCR_RIE		BIT(4)
+#define MLB_USIO_SCR_UPCL		BIT(7)
+#define MLB_USIO_ESCR_L_8BIT		0
+#define MLB_USIO_ESCR_L_5BIT		1
+#define MLB_USIO_ESCR_L_6BIT		2
+#define MLB_USIO_ESCR_L_7BIT		3
+#define MLB_USIO_ESCR_P			BIT(3)
+#define MLB_USIO_ESCR_PEN		BIT(4)
+#define MLB_USIO_ESCR_FLWEN		BIT(7)
+#define MLB_USIO_SSR_TBI		BIT(0)
+#define MLB_USIO_SSR_TDRE		BIT(1)
+#define MLB_USIO_SSR_RDRF		BIT(2)
+#define MLB_USIO_SSR_ORE		BIT(3)
+#define MLB_USIO_SSR_FRE		BIT(4)
+#define MLB_USIO_SSR_PE			BIT(5)
+#define MLB_USIO_SSR_REC		BIT(7)
+#define MLB_USIO_SSR_BRK		BIT(8)
+#define MLB_USIO_FCR_FE1		BIT(0)
+#define MLB_USIO_FCR_FE2		BIT(1)
+#define MLB_USIO_FCR_FCL1		BIT(2)
+#define MLB_USIO_FCR_FCL2		BIT(3)
+#define MLB_USIO_FCR_FSET		BIT(4)
+#define MLB_USIO_FCR_FTIE		BIT(9)
+#define MLB_USIO_FCR_FDRQ		BIT(10)
+#define MLB_USIO_FCR_FRIIE		BIT(11)
+
+static void mlb_usio_stop_tx(struct uart_port *port)
+{
+	writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE,
+	       port->membase + MLB_USIO_REG_FCR);
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_TBIE,
+	       port->membase + MLB_USIO_REG_SCR);
+}
+
+static void mlb_usio_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE,
+	       port->membase + MLB_USIO_REG_FCR);
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) &
+	       ~(MLB_USIO_SCR_TIE | MLB_USIO_SCR_TBIE),
+	       port->membase + MLB_USIO_REG_SCR);
+
+	if (port->x_char) {
+		writew(port->x_char, port->membase + MLB_USIO_REG_DR);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		mlb_usio_stop_tx(port);
+		return;
+	}
+
+	count = port->fifosize -
+		(readw(port->membase + MLB_USIO_REG_FBYTE) & 0xff);
+
+	do {
+		writew(xmit->buf[xmit->tail], port->membase + MLB_USIO_REG_DR);
+
+		uart_xmit_advance(port, 1);
+		if (uart_circ_empty(xmit))
+			break;
+
+	} while (--count > 0);
+
+	writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FDRQ,
+	       port->membase + MLB_USIO_REG_FCR);
+
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE,
+	       port->membase + MLB_USIO_REG_SCR);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		mlb_usio_stop_tx(port);
+}
+
+static void mlb_usio_start_tx(struct uart_port *port)
+{
+	u16 fcr = readw(port->membase + MLB_USIO_REG_FCR);
+
+	writew(fcr | MLB_USIO_FCR_FTIE, port->membase + MLB_USIO_REG_FCR);
+	if (!(fcr & MLB_USIO_FCR_FDRQ))
+		return;
+
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE,
+	       port->membase + MLB_USIO_REG_SCR);
+
+	if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI)
+		mlb_usio_tx_chars(port);
+}
+
+static void mlb_usio_stop_rx(struct uart_port *port)
+{
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_RIE,
+	       port->membase + MLB_USIO_REG_SCR);
+}
+
+static void mlb_usio_enable_ms(struct uart_port *port)
+{
+	writeb(readb(port->membase + MLB_USIO_REG_SCR) |
+	       MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE,
+	       port->membase + MLB_USIO_REG_SCR);
+}
+
+static void mlb_usio_rx_chars(struct uart_port *port)
+{
+	struct tty_port *ttyport = &port->state->port;
+	unsigned long flag = 0;
+	char ch = 0;
+	u8 status;
+	int max_count = 2;
+
+	while (max_count--) {
+		status = readb(port->membase + MLB_USIO_REG_SSR);
+
+		if (!(status & MLB_USIO_SSR_RDRF))
+			break;
+
+		if (!(status & (MLB_USIO_SSR_ORE | MLB_USIO_SSR_FRE |
+				MLB_USIO_SSR_PE))) {
+			ch = readw(port->membase + MLB_USIO_REG_DR);
+			flag = TTY_NORMAL;
+			port->icount.rx++;
+			if (uart_handle_sysrq_char(port, ch))
+				continue;
+			uart_insert_char(port, status, MLB_USIO_SSR_ORE,
+					 ch, flag);
+			continue;
+		}
+		if (status & MLB_USIO_SSR_PE)
+			port->icount.parity++;
+		if (status & MLB_USIO_SSR_ORE)
+			port->icount.overrun++;
+		status &= port->read_status_mask;
+		if (status & MLB_USIO_SSR_BRK) {
+			flag = TTY_BREAK;
+			ch = 0;
+		} else
+			if (status & MLB_USIO_SSR_PE) {
+				flag = TTY_PARITY;
+				ch = 0;
+			} else
+				if (status & MLB_USIO_SSR_FRE) {
+					flag = TTY_FRAME;
+					ch = 0;
+				}
+		if (flag)
+			uart_insert_char(port, status, MLB_USIO_SSR_ORE,
+					 ch, flag);
+
+		writeb(readb(port->membase + MLB_USIO_REG_SSR) |
+				MLB_USIO_SSR_REC,
+				port->membase + MLB_USIO_REG_SSR);
+
+		max_count = readw(port->membase + MLB_USIO_REG_FBYTE) >> 8;
+		writew(readw(port->membase + MLB_USIO_REG_FCR) |
+		       MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE,
+		port->membase + MLB_USIO_REG_FCR);
+	}
+
+	tty_flip_buffer_push(ttyport);
+}
+
+static irqreturn_t mlb_usio_rx_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+
+	spin_lock(&port->lock);
+	mlb_usio_rx_chars(port);
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mlb_usio_tx_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+
+	spin_lock(&port->lock);
+	if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI)
+		mlb_usio_tx_chars(port);
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int mlb_usio_tx_empty(struct uart_port *port)
+{
+	return (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) ?
+		TIOCSER_TEMT : 0;
+}
+
+static void mlb_usio_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int mlb_usio_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+
+}
+
+static void mlb_usio_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int mlb_usio_startup(struct uart_port *port)
+{
+	const char *portname = to_platform_device(port->dev)->name;
+	unsigned long flags;
+	int ret, index = port->line;
+	unsigned char  escr;
+
+	ret = request_irq(mlb_usio_irq[index][RX], mlb_usio_rx_irq,
+				0, portname, port);
+	if (ret)
+		return ret;
+	ret = request_irq(mlb_usio_irq[index][TX], mlb_usio_tx_irq,
+				0, portname, port);
+	if (ret) {
+		free_irq(mlb_usio_irq[index][RX], port);
+		return ret;
+	}
+
+	escr = readb(port->membase + MLB_USIO_REG_ESCR);
+	if (of_property_read_bool(port->dev->of_node, "auto-flow-control"))
+		escr |= MLB_USIO_ESCR_FLWEN;
+	spin_lock_irqsave(&port->lock, flags);
+	writeb(0, port->membase + MLB_USIO_REG_SCR);
+	writeb(escr, port->membase + MLB_USIO_REG_ESCR);
+	writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR);
+	writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR);
+	writew(0, port->membase + MLB_USIO_REG_FCR);
+	writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2,
+	       port->membase + MLB_USIO_REG_FCR);
+	writew(MLB_USIO_FCR_FE1 | MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE,
+	       port->membase + MLB_USIO_REG_FCR);
+	writew(0, port->membase + MLB_USIO_REG_FBYTE);
+	writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE);
+
+	writeb(MLB_USIO_SCR_TXE  | MLB_USIO_SCR_RIE | MLB_USIO_SCR_TBIE |
+	       MLB_USIO_SCR_RXE, port->membase + MLB_USIO_REG_SCR);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void mlb_usio_shutdown(struct uart_port *port)
+{
+	int index = port->line;
+
+	free_irq(mlb_usio_irq[index][RX], port);
+	free_irq(mlb_usio_irq[index][TX], port);
+}
+
+static void mlb_usio_set_termios(struct uart_port *port,
+				 struct ktermios *termios,
+				 const struct ktermios *old)
+{
+	unsigned int escr, smr = MLB_USIO_SMR_SOE;
+	unsigned long flags, baud, quot;
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		escr = MLB_USIO_ESCR_L_5BIT;
+		break;
+	case CS6:
+		escr = MLB_USIO_ESCR_L_6BIT;
+		break;
+	case CS7:
+		escr = MLB_USIO_ESCR_L_7BIT;
+		break;
+	case CS8:
+	default:
+		escr = MLB_USIO_ESCR_L_8BIT;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		smr |= MLB_USIO_SMR_SBL;
+
+	if (termios->c_cflag & PARENB) {
+		escr |= MLB_USIO_ESCR_PEN;
+		if (termios->c_cflag & PARODD)
+			escr |= MLB_USIO_ESCR_P;
+	}
+	/* Set hard flow control */
+	if (of_property_read_bool(port->dev->of_node, "auto-flow-control") ||
+			(termios->c_cflag & CRTSCTS))
+		escr |= MLB_USIO_ESCR_FLWEN;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
+	if (baud > 1)
+		quot = port->uartclk / baud - 1;
+	else
+		quot = 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	port->read_status_mask = MLB_USIO_SSR_ORE | MLB_USIO_SSR_RDRF |
+				 MLB_USIO_SSR_TDRE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE;
+
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE;
+	if ((termios->c_iflag & IGNBRK) && (termios->c_iflag & IGNPAR))
+		port->ignore_status_mask |= MLB_USIO_SSR_ORE;
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= MLB_USIO_SSR_RDRF;
+
+	writeb(0, port->membase + MLB_USIO_REG_SCR);
+	writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR);
+	writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR);
+	writew(0, port->membase + MLB_USIO_REG_FCR);
+	writeb(smr, port->membase + MLB_USIO_REG_SMR);
+	writeb(escr, port->membase + MLB_USIO_REG_ESCR);
+	writew(quot, port->membase + MLB_USIO_REG_BGR);
+	writew(0, port->membase + MLB_USIO_REG_FCR);
+	writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2 | MLB_USIO_FCR_FE1 |
+	       MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE,
+	       port->membase + MLB_USIO_REG_FCR);
+	writew(0, port->membase + MLB_USIO_REG_FBYTE);
+	writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE);
+	writeb(MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE | MLB_USIO_SCR_TBIE |
+	       MLB_USIO_SCR_TXE, port->membase + MLB_USIO_REG_SCR);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *mlb_usio_type(struct uart_port *port)
+{
+	return ((port->type == PORT_MLB_USIO) ? USIO_NAME : NULL);
+}
+
+static void mlb_usio_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_MLB_USIO;
+}
+
+static const struct uart_ops mlb_usio_ops = {
+	.tx_empty	= mlb_usio_tx_empty,
+	.set_mctrl	= mlb_usio_set_mctrl,
+	.get_mctrl	= mlb_usio_get_mctrl,
+	.stop_tx	= mlb_usio_stop_tx,
+	.start_tx	= mlb_usio_start_tx,
+	.stop_rx	= mlb_usio_stop_rx,
+	.enable_ms	= mlb_usio_enable_ms,
+	.break_ctl	= mlb_usio_break_ctl,
+	.startup	= mlb_usio_startup,
+	.shutdown	= mlb_usio_shutdown,
+	.set_termios	= mlb_usio_set_termios,
+	.type		= mlb_usio_type,
+	.config_port	= mlb_usio_config_port,
+};
+
+#ifdef CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE
+
+static void mlb_usio_console_putchar(struct uart_port *port, unsigned char c)
+{
+	while (!(readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TDRE))
+		cpu_relax();
+
+	writew(c, port->membase + MLB_USIO_REG_DR);
+}
+
+static void mlb_usio_console_write(struct console *co, const char *s,
+			       unsigned int count)
+{
+	struct uart_port *port = &mlb_usio_ports[co->index];
+
+	uart_console_write(port, s, count, mlb_usio_console_putchar);
+}
+
+static int __init mlb_usio_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int parity = 'n';
+	int flow = 'n';
+	int bits = 8;
+
+	if (co->index >= CONFIG_SERIAL_MILBEAUT_USIO_PORTS)
+		return -ENODEV;
+
+	port = &mlb_usio_ports[co->index];
+	if (!port->membase)
+		return -ENODEV;
+
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	if (of_property_read_bool(port->dev->of_node, "auto-flow-control"))
+		flow = 'r';
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+
+static struct uart_driver mlb_usio_uart_driver;
+static struct console mlb_usio_console = {
+	.name   = USIO_UART_DEV_NAME,
+	.write  = mlb_usio_console_write,
+	.device = uart_console_device,
+	.setup  = mlb_usio_console_setup,
+	.flags  = CON_PRINTBUFFER,
+	.index  = -1,
+	.data   = &mlb_usio_uart_driver,
+};
+
+static int __init mlb_usio_console_init(void)
+{
+	register_console(&mlb_usio_console);
+	return 0;
+}
+console_initcall(mlb_usio_console_init);
+
+
+static void mlb_usio_early_console_write(struct console *co, const char *s,
+					u_int count)
+{
+	struct earlycon_device *dev = co->data;
+
+	uart_console_write(&dev->port, s, count, mlb_usio_console_putchar);
+}
+
+static int __init mlb_usio_early_console_setup(struct earlycon_device *device,
+						const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+	device->con->write = mlb_usio_early_console_write;
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(mlb_usio, "socionext,milbeaut-usio-uart",
+			mlb_usio_early_console_setup);
+
+#define USIO_CONSOLE	(&mlb_usio_console)
+#else
+#define USIO_CONSOLE	NULL
+#endif
+
+static struct  uart_driver mlb_usio_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= USIO_NAME,
+	.dev_name	= USIO_UART_DEV_NAME,
+	.cons           = USIO_CONSOLE,
+	.nr		= CONFIG_SERIAL_MILBEAUT_USIO_PORTS,
+};
+
+static int mlb_usio_probe(struct platform_device *pdev)
+{
+	struct clk *clk = devm_clk_get(&pdev->dev, NULL);
+	struct uart_port *port;
+	struct resource *res;
+	int index = 0;
+	int ret;
+
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Missing clock\n");
+		return PTR_ERR(clk);
+	}
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Clock enable failed: %d\n", ret);
+		return ret;
+	}
+	of_property_read_u32(pdev->dev.of_node, "index", &index);
+	port = &mlb_usio_ports[index];
+
+	port->private_data = (void *)clk;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Missing regs\n");
+		ret = -ENODEV;
+		goto failed;
+	}
+	port->membase = devm_ioremap(&pdev->dev, res->start,
+				resource_size(res));
+
+	ret = platform_get_irq_byname(pdev, "rx");
+	mlb_usio_irq[index][RX] = ret;
+
+	ret = platform_get_irq_byname(pdev, "tx");
+	mlb_usio_irq[index][TX] = ret;
+
+	port->irq = mlb_usio_irq[index][RX];
+	port->uartclk = clk_get_rate(clk);
+	port->fifosize = 128;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE);
+	port->iotype = UPIO_MEM32;
+	port->flags = UPF_BOOT_AUTOCONF | UPF_SPD_VHI;
+	port->line = index;
+	port->ops = &mlb_usio_ops;
+	port->dev = &pdev->dev;
+
+	ret = uart_add_one_port(&mlb_usio_uart_driver, port);
+	if (ret) {
+		dev_err(&pdev->dev, "Adding port failed: %d\n", ret);
+		goto failed;
+	}
+	return 0;
+
+failed:
+	clk_disable_unprepare(clk);
+
+	return ret;
+}
+
+static int mlb_usio_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = &mlb_usio_ports[pdev->id];
+	struct clk *clk = port->private_data;
+
+	uart_remove_one_port(&mlb_usio_uart_driver, port);
+	clk_disable_unprepare(clk);
+
+	return 0;
+}
+
+static const struct of_device_id mlb_usio_dt_ids[] = {
+	{ .compatible = "socionext,milbeaut-usio-uart" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids);
+
+static struct platform_driver mlb_usio_driver = {
+	.probe          = mlb_usio_probe,
+	.remove         = mlb_usio_remove,
+	.driver         = {
+		.name   = USIO_NAME,
+		.of_match_table = mlb_usio_dt_ids,
+	},
+};
+
+static int __init mlb_usio_init(void)
+{
+	int ret = uart_register_driver(&mlb_usio_uart_driver);
+
+	if (ret) {
+		pr_err("%s: uart registration failed: %d\n", __func__, ret);
+		return ret;
+	}
+	ret = platform_driver_register(&mlb_usio_driver);
+	if (ret) {
+		uart_unregister_driver(&mlb_usio_uart_driver);
+		pr_err("%s: drv registration failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit mlb_usio_exit(void)
+{
+	platform_driver_unregister(&mlb_usio_driver);
+	uart_unregister_driver(&mlb_usio_uart_driver);
+}
+
+module_init(mlb_usio_init);
+module_exit(mlb_usio_exit);
+
+MODULE_AUTHOR("SOCIONEXT");
+MODULE_DESCRIPTION("MILBEAUT_USIO/UART Driver");
+MODULE_LICENSE("GPL");