Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 244 insertions, 0 deletions

diff --git a/drivers/ufs/host/ufs-qcom-ice.c b/drivers/ufs/host/ufs-qcom-ice.c
new file mode 100644
index 000000000..62387ccd5
--- /dev/null
+++ b/drivers/ufs/host/ufs-qcom-ice.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Qualcomm ICE (Inline Crypto Engine) support.
+ *
+ * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved.
+ * Copyright 2019 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/qcom_scm.h>
+
+#include "ufs-qcom.h"
+
+#define AES_256_XTS_KEY_SIZE			64
+
+/* QCOM ICE registers */
+
+#define QCOM_ICE_REG_CONTROL			0x0000
+#define QCOM_ICE_REG_RESET			0x0004
+#define QCOM_ICE_REG_VERSION			0x0008
+#define QCOM_ICE_REG_FUSE_SETTING		0x0010
+#define QCOM_ICE_REG_PARAMETERS_1		0x0014
+#define QCOM_ICE_REG_PARAMETERS_2		0x0018
+#define QCOM_ICE_REG_PARAMETERS_3		0x001C
+#define QCOM_ICE_REG_PARAMETERS_4		0x0020
+#define QCOM_ICE_REG_PARAMETERS_5		0x0024
+
+/* QCOM ICE v3.X only */
+#define QCOM_ICE_GENERAL_ERR_STTS		0x0040
+#define QCOM_ICE_INVALID_CCFG_ERR_STTS		0x0030
+#define QCOM_ICE_GENERAL_ERR_MASK		0x0044
+
+/* QCOM ICE v2.X only */
+#define QCOM_ICE_REG_NON_SEC_IRQ_STTS		0x0040
+#define QCOM_ICE_REG_NON_SEC_IRQ_MASK		0x0044
+
+#define QCOM_ICE_REG_NON_SEC_IRQ_CLR		0x0048
+#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1	0x0050
+#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2	0x0054
+#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1	0x0058
+#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2	0x005C
+#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC	0x0060
+#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC	0x0064
+#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC	0x0068
+#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC	0x006C
+#define QCOM_ICE_REG_BIST_STATUS		0x0070
+#define QCOM_ICE_REG_BYPASS_STATUS		0x0074
+#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
+#define QCOM_ICE_REG_ENDIAN_SWAP		0x1004
+#define QCOM_ICE_REG_TEST_BUS_CONTROL		0x1010
+#define QCOM_ICE_REG_TEST_BUS_REG		0x1014
+
+/* BIST ("built-in self-test"?) status flags */
+#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
+
+#define QCOM_ICE_FUSE_SETTING_MASK		0x1
+#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
+#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
+
+#define qcom_ice_writel(host, val, reg)	\
+	writel((val), (host)->ice_mmio + (reg))
+#define qcom_ice_readl(host, reg)	\
+	readl((host)->ice_mmio + (reg))
+
+static bool qcom_ice_supported(struct ufs_qcom_host *host)
+{
+	struct device *dev = host->hba->dev;
+	u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
+	int major = regval >> 24;
+	int minor = (regval >> 16) & 0xFF;
+	int step = regval & 0xFFFF;
+
+	/* For now this driver only supports ICE version 3. */
+	if (major != 3) {
+		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
+			 major, minor, step);
+		return false;
+	}
+
+	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
+		 major, minor, step);
+
+	/* If fuses are blown, ICE might not work in the standard way. */
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
+	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
+		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
+		return false;
+	}
+	return true;
+}
+
+int ufs_qcom_ice_init(struct ufs_qcom_host *host)
+{
+	struct ufs_hba *hba = host->hba;
+	struct device *dev = hba->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	int err;
+
+	if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) &
+	      MASK_CRYPTO_SUPPORT))
+		return 0;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ice");
+	if (!res) {
+		dev_warn(dev, "ICE registers not found\n");
+		goto disable;
+	}
+
+	if (!qcom_scm_ice_available()) {
+		dev_warn(dev, "ICE SCM interface not found\n");
+		goto disable;
+	}
+
+	host->ice_mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->ice_mmio)) {
+		err = PTR_ERR(host->ice_mmio);
+		return err;
+	}
+
+	if (!qcom_ice_supported(host))
+		goto disable;
+
+	return 0;
+
+disable:
+	dev_warn(dev, "Disabling inline encryption support\n");
+	hba->caps &= ~UFSHCD_CAP_CRYPTO;
+	return 0;
+}
+
+static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
+{
+	u32 regval;
+
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	/*
+	 * Enable low power mode sequence
+	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
+	 */
+	regval |= 0x7000;
+	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+}
+
+static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
+{
+	u32 regval;
+
+	/* ICE Optimizations Enable Sequence */
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	regval |= 0xD807100;
+	/* ICE HPG requires delay before writing */
+	udelay(5);
+	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+	udelay(5);
+}
+
+int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
+{
+	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
+		return 0;
+	qcom_ice_low_power_mode_enable(host);
+	qcom_ice_optimization_enable(host);
+	return ufs_qcom_ice_resume(host);
+}
+
+/* Poll until all BIST bits are reset */
+static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
+{
+	int count;
+	u32 reg;
+
+	for (count = 0; count < 100; count++) {
+		reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
+		if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
+			break;
+		udelay(50);
+	}
+	if (reg)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
+{
+	int err;
+
+	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
+		return 0;
+
+	err = qcom_ice_wait_bist_status(host);
+	if (err) {
+		dev_err(host->hba->dev, "BIST status error (%d)\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * Program a key into a QC ICE keyslot, or evict a keyslot.  QC ICE requires
+ * vendor-specific SCM calls for this; it doesn't support the standard way.
+ */
+int ufs_qcom_ice_program_key(struct ufs_hba *hba,
+			     const union ufs_crypto_cfg_entry *cfg, int slot)
+{
+	union ufs_crypto_cap_entry cap;
+	union {
+		u8 bytes[AES_256_XTS_KEY_SIZE];
+		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
+	} key;
+	int i;
+	int err;
+
+	if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE))
+		return qcom_scm_ice_invalidate_key(slot);
+
+	/* Only AES-256-XTS has been tested so far. */
+	cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
+	if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
+	    cap.key_size != UFS_CRYPTO_KEY_SIZE_256) {
+		dev_err_ratelimited(hba->dev,
+				    "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
+				    cap.algorithm_id, cap.key_size);
+		return -EINVAL;
+	}
+
+	memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
+
+	/*
+	 * The SCM call byte-swaps the 32-bit words of the key.  So we have to
+	 * do the same, in order for the final key be correct.
+	 */
+	for (i = 0; i < ARRAY_SIZE(key.words); i++)
+		__cpu_to_be32s(&key.words[i]);
+
+	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
+				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
+				   cfg->data_unit_size);
+	memzero_explicit(&key, sizeof(key));
+	return err;
+}