diff options
author | 2023-02-21 18:24:12 -0800 | |
---|---|---|
committer | 2023-02-21 18:24:12 -0800 | |
commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/usb/cdns3/cdns3-imx.c | |
download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'drivers/usb/cdns3/cdns3-imx.c')
-rw-r--r-- | drivers/usb/cdns3/cdns3-imx.c | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c new file mode 100644 index 000000000..59860d175 --- /dev/null +++ b/drivers/usb/cdns3/cdns3-imx.c @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller + * + * Copyright (C) 2019 NXP + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/iopoll.h> +#include <linux/pm_runtime.h> +#include "core.h" + +#define USB3_CORE_CTRL1 0x00 +#define USB3_CORE_CTRL2 0x04 +#define USB3_INT_REG 0x08 +#define USB3_CORE_STATUS 0x0c +#define XHCI_DEBUG_LINK_ST 0x10 +#define XHCI_DEBUG_BUS 0x14 +#define USB3_SSPHY_CTRL1 0x40 +#define USB3_SSPHY_CTRL2 0x44 +#define USB3_SSPHY_STATUS 0x4c +#define USB2_PHY_CTRL1 0x50 +#define USB2_PHY_CTRL2 0x54 +#define USB2_PHY_STATUS 0x5c + +/* Register bits definition */ + +/* USB3_CORE_CTRL1 */ +#define SW_RESET_MASK GENMASK(31, 26) +#define PWR_SW_RESET BIT(31) +#define APB_SW_RESET BIT(30) +#define AXI_SW_RESET BIT(29) +#define RW_SW_RESET BIT(28) +#define PHY_SW_RESET BIT(27) +#define PHYAHB_SW_RESET BIT(26) +#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \ + RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET) +#define OC_DISABLE BIT(9) +#define MDCTRL_CLK_SEL BIT(7) +#define MODE_STRAP_MASK (0x7) +#define DEV_MODE (1 << 2) +#define HOST_MODE (1 << 1) +#define OTG_MODE (1 << 0) + +/* USB3_INT_REG */ +#define CLK_125_REQ BIT(29) +#define LPM_CLK_REQ BIT(28) +#define DEVU3_WAEKUP_EN BIT(14) +#define OTG_WAKEUP_EN BIT(12) +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */ +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */ + +/* USB3_CORE_STATUS */ +#define MDCTRL_CLK_STATUS BIT(15) +#define DEV_POWER_ON_READY BIT(13) +#define HOST_POWER_ON_READY BIT(12) + +/* USB3_SSPHY_STATUS */ +#define CLK_VALID_MASK (0x3f << 26) +#define CLK_VALID_COMPARE_BITS (0xf << 28) +#define PHY_REFCLK_REQ (1 << 0) + +/* OTG registers definition */ +#define OTGSTS 0x4 +/* OTGSTS */ +#define OTG_NRDY BIT(11) + +/* xHCI registers definition */ +#define XECP_PM_PMCSR 0x8018 +#define XECP_AUX_CTRL_REG1 0x8120 + +/* Register bits definition */ +/* XECP_AUX_CTRL_REG1 */ +#define CFG_RXDET_P3_EN BIT(15) + +/* XECP_PM_PMCSR */ +#define PS_MASK GENMASK(1, 0) +#define PS_D0 0 +#define PS_D1 1 + +struct cdns_imx { + struct device *dev; + void __iomem *noncore; + struct clk_bulk_data *clks; + int num_clks; + struct platform_device *cdns3_pdev; +}; + +static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset) +{ + return readl(data->noncore + offset); +} + +static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value) +{ + writel(value, data->noncore + offset); +} + +static const struct clk_bulk_data imx_cdns3_core_clks[] = { + { .id = "usb3_lpm_clk" }, + { .id = "usb3_bus_clk" }, + { .id = "usb3_aclk" }, + { .id = "usb3_ipg_clk" }, + { .id = "usb3_core_pclk" }, +}; + +static int cdns_imx_noncore_init(struct cdns_imx *data) +{ + u32 value; + int ret; + struct device *dev = data->dev; + + cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK); + udelay(1); + ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value, + (value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS, + 10, 100000); + if (ret) { + dev_err(dev, "wait clkvld timeout\n"); + return ret; + } + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value |= ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + udelay(1); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + value = cdns_imx_readl(data, USB3_INT_REG); + value |= HOST_INT1_EN | DEV_INT_EN; + cdns_imx_writel(data, USB3_INT_REG, value); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value &= ~ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + return ret; +} + +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup); +static struct cdns3_platform_data cdns_imx_pdata = { + .platform_suspend = cdns_imx_platform_suspend, + .quirks = CDNS3_DEFAULT_PM_RUNTIME_ALLOW, +}; + +static const struct of_dev_auxdata cdns_imx_auxdata[] = { + { + .compatible = "cdns,usb3", + .platform_data = &cdns_imx_pdata, + }, + {}, +}; + +static int cdns_imx_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct cdns_imx *data; + int ret; + + if (!node) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + data->dev = dev; + data->noncore = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->noncore)) { + dev_err(dev, "can't map IOMEM resource\n"); + return PTR_ERR(data->noncore); + } + + data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks); + data->clks = devm_kmemdup(dev, imx_cdns3_core_clks, + sizeof(imx_cdns3_core_clks), GFP_KERNEL); + if (!data->clks) + return -ENOMEM; + + ret = devm_clk_bulk_get(dev, data->num_clks, data->clks); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(data->num_clks, data->clks); + if (ret) + return ret; + + ret = cdns_imx_noncore_init(data); + if (ret) + goto err; + + ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev); + if (ret) { + dev_err(dev, "failed to create children: %d\n", ret); + goto err; + } + + device_set_wakeup_capable(dev, true); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return ret; +err: + clk_bulk_disable_unprepare(data->num_clks, data->clks); + return ret; +} + +static int cdns_imx_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cdns_imx *data = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + of_platform_depopulate(dev); + clk_bulk_disable_unprepare(data->num_clks, data->clks); + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static void cdns3_set_wakeup(struct cdns_imx *data, bool enable) +{ + u32 value; + + value = cdns_imx_readl(data, USB3_INT_REG); + if (enable) + value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN; + else + value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN); + + cdns_imx_writel(data, USB3_INT_REG, value); +} + +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + struct cdns *cdns = dev_get_drvdata(dev); + struct device *parent = dev->parent; + struct cdns_imx *data = dev_get_drvdata(parent); + void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs); + void __iomem *xhci_regs = cdns->xhci_regs; + u32 value; + int ret = 0; + + if (cdns->role != USB_ROLE_HOST) + return 0; + + if (suspend) { + /* SW request low power when all usb ports allow to it ??? */ + value = readl(xhci_regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D1; + writel(value, xhci_regs + XECP_PM_PMCSR); + + /* mdctrl_clk_sel */ + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value |= MDCTRL_CLK_SEL; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + /* wait for mdctrl_clk_status */ + value = cdns_imx_readl(data, USB3_CORE_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value, + (value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS, + 10, 100000); + if (ret) + dev_warn(parent, "wait mdctrl_clk_status timeout\n"); + + /* wait lpm_clk_req to be 0 */ + value = cdns_imx_readl(data, USB3_INT_REG); + ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value, + (value & LPM_CLK_REQ) != LPM_CLK_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait lpm_clk_req timeout\n"); + + /* wait phy_refclk_req to be 0 */ + value = cdns_imx_readl(data, USB3_SSPHY_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value, + (value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait phy_refclk_req timeout\n"); + + cdns3_set_wakeup(data, wakeup); + } else { + cdns3_set_wakeup(data, false); + + /* SW request D0 */ + value = readl(xhci_regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D0; + writel(value, xhci_regs + XECP_PM_PMCSR); + + /* clr CFG_RXDET_P3_EN */ + value = readl(xhci_regs + XECP_AUX_CTRL_REG1); + value &= ~CFG_RXDET_P3_EN; + writel(value, xhci_regs + XECP_AUX_CTRL_REG1); + + /* clear mdctrl_clk_sel */ + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value &= ~MDCTRL_CLK_SEL; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + /* wait CLK_125_REQ to be 1 */ + value = cdns_imx_readl(data, USB3_INT_REG); + ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value, + (value & CLK_125_REQ) == CLK_125_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait CLK_125_REQ timeout\n"); + + /* wait for mdctrl_clk_status is cleared */ + value = cdns_imx_readl(data, USB3_CORE_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value, + (value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS, + 10, 100000); + if (ret) + dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n"); + + /* Wait until OTG_NRDY is 0 */ + value = readl(otg_regs + OTGSTS); + ret = readl_poll_timeout(otg_regs + OTGSTS, value, + (value & OTG_NRDY) != OTG_NRDY, + 10, 100000); + if (ret) + dev_warn(parent, "wait OTG ready timeout\n"); + } + + return ret; + +} + +static int cdns_imx_resume(struct device *dev) +{ + struct cdns_imx *data = dev_get_drvdata(dev); + + return clk_bulk_prepare_enable(data->num_clks, data->clks); +} + +static int cdns_imx_suspend(struct device *dev) +{ + struct cdns_imx *data = dev_get_drvdata(dev); + + clk_bulk_disable_unprepare(data->num_clks, data->clks); + + return 0; +} + + +/* Indicate if the controller was power lost before */ +static inline bool cdns_imx_is_power_lost(struct cdns_imx *data) +{ + u32 value; + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + if ((value & SW_RESET_MASK) == ALL_SW_RESET) + return true; + else + return false; +} + +static int __maybe_unused cdns_imx_system_resume(struct device *dev) +{ + struct cdns_imx *data = dev_get_drvdata(dev); + int ret; + + ret = cdns_imx_resume(dev); + if (ret) + return ret; + + if (cdns_imx_is_power_lost(data)) { + dev_dbg(dev, "resume from power lost\n"); + ret = cdns_imx_noncore_init(data); + if (ret) + cdns_imx_suspend(dev); + } + + return ret; +} + +#else +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + return 0; +} + +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops cdns_imx_pm_ops = { + SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(cdns_imx_suspend, cdns_imx_system_resume) +}; + +static const struct of_device_id cdns_imx_of_match[] = { + { .compatible = "fsl,imx8qm-usb3", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cdns_imx_of_match); + +static struct platform_driver cdns_imx_driver = { + .probe = cdns_imx_probe, + .remove = cdns_imx_remove, + .driver = { + .name = "cdns3-imx", + .of_match_table = cdns_imx_of_match, + .pm = &cdns_imx_pm_ops, + }, +}; +module_platform_driver(cdns_imx_driver); + +MODULE_ALIAS("platform:cdns3-imx"); +MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer"); |