Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 495 insertions, 0 deletions

diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
new file mode 100644
index 000000000..d00ff98df
--- /dev/null
+++ b/drivers/usb/cdns3/drd.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/usb/otg.h>
+
+#include "drd.h"
+#include "core.h"
+
+/**
+ * cdns_set_mode - change mode of OTG Core
+ * @cdns: pointer to context structure
+ * @mode: selected mode from cdns_role
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_set_mode(struct cdns *cdns, enum usb_dr_mode mode)
+{
+	void __iomem  *override_reg;
+	u32 reg;
+
+	switch (mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		break;
+	case USB_DR_MODE_HOST:
+		break;
+	case USB_DR_MODE_OTG:
+		dev_dbg(cdns->dev, "Set controller to OTG mode\n");
+
+		if (cdns->version == CDNSP_CONTROLLER_V2)
+			override_reg = &cdns->otg_cdnsp_regs->override;
+		else if (cdns->version == CDNS3_CONTROLLER_V1)
+			override_reg = &cdns->otg_v1_regs->override;
+		else
+			override_reg = &cdns->otg_v0_regs->ctrl1;
+
+		reg = readl(override_reg);
+
+		if (cdns->version != CDNS3_CONTROLLER_V0)
+			reg |= OVERRIDE_IDPULLUP;
+		else
+			reg |= OVERRIDE_IDPULLUP_V0;
+
+		writel(reg, override_reg);
+
+		if (cdns->version == CDNS3_CONTROLLER_V1) {
+			/*
+			 * Enable work around feature built into the
+			 * controller to address issue with RX Sensitivity
+			 * est (EL_17) for USB2 PHY. The issue only occures
+			 * for 0x0002450D controller version.
+			 */
+			if (cdns->phyrst_a_enable) {
+				reg = readl(&cdns->otg_v1_regs->phyrst_cfg);
+				reg |= PHYRST_CFG_PHYRST_A_ENABLE;
+				writel(reg, &cdns->otg_v1_regs->phyrst_cfg);
+			}
+		}
+
+		/*
+		 * Hardware specification says: "ID_VALUE must be valid within
+		 * 50ms after idpullup is set to '1" so driver must wait
+		 * 50ms before reading this pin.
+		 */
+		usleep_range(50000, 60000);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int cdns_get_id(struct cdns *cdns)
+{
+	int id;
+
+	id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
+	dev_dbg(cdns->dev, "OTG ID: %d", id);
+
+	return id;
+}
+
+int cdns_get_vbus(struct cdns *cdns)
+{
+	int vbus;
+
+	vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
+	dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
+
+	return vbus;
+}
+
+void cdns_clear_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg |= OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_clear_vbus);
+
+void cdns_set_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg &= ~OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_set_vbus);
+
+bool cdns_is_host(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_HOST)
+		return true;
+	else if (cdns_get_id(cdns) == CDNS3_ID_HOST)
+		return true;
+
+	return false;
+}
+
+bool cdns_is_device(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
+		return true;
+	else if (cdns->dr_mode == USB_DR_MODE_OTG)
+		if (cdns_get_id(cdns) == CDNS3_ID_PERIPHERAL)
+			return true;
+
+	return false;
+}
+
+/**
+ * cdns_otg_disable_irq - Disable all OTG interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_disable_irq(struct cdns *cdns)
+{
+	writel(0, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_otg_enable_irq - enable id and sess_valid interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_enable_irq(struct cdns *cdns)
+{
+	writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT |
+	       OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_drd_host_on - start host.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int cdns_drd_host_on(struct cdns *cdns)
+{
+	u32 val, ready_bit;
+	int ret;
+
+	/* Enable host mode. */
+	writel(OTGCMD_HOST_BUS_REQ | OTGCMD_OTG_DIS,
+	       &cdns->otg_regs->cmd);
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_XHCI_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_XHCI_READY;
+
+	dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+
+	if (ret)
+		dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
+	return ret;
+}
+
+/**
+ * cdns_drd_host_off - stop host.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_host_off(struct cdns *cdns)
+{
+	u32 val;
+
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+
+	/* Waiting till H_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_HOST_STATE_MASK),
+				  1, 2000000);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+
+/**
+ * cdns_drd_gadget_on - start gadget.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_gadget_on(struct cdns *cdns)
+{
+	u32 reg = OTGCMD_OTG_DIS;
+	u32 ready_bit;
+	int ret, val;
+
+	/* switch OTG core */
+	writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+	dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_DEV_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_DEV_READY;
+
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+	if (ret) {
+		dev_err(cdns->dev, "timeout waiting for dev_ready\n");
+		return ret;
+	}
+
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_on);
+
+/**
+ * cdns_drd_gadget_off - stop gadget.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_gadget_off(struct cdns *cdns)
+{
+	u32 val;
+
+	/*
+	 * Driver should wait at least 10us after disabling Device
+	 * before turning-off Device (DEV_BUS_DROP).
+	 */
+	usleep_range(20, 30);
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+	/* Waiting till DEV_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_DEV_STATE_MASK),
+				  1, 2000000);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_off);
+
+/**
+ * cdns_init_otg_mode - initialize drd controller
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_init_otg_mode(struct cdns *cdns)
+{
+	int ret;
+
+	cdns_otg_disable_irq(cdns);
+	/* clear all interrupts */
+	writel(~0, &cdns->otg_irq_regs->ivect);
+
+	ret = cdns_set_mode(cdns, USB_DR_MODE_OTG);
+	if (ret)
+		return ret;
+
+	cdns_otg_enable_irq(cdns);
+
+	return 0;
+}
+
+/**
+ * cdns_drd_update_mode - initialize mode of operation
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_update_mode(struct cdns *cdns)
+{
+	int ret;
+
+	switch (cdns->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
+		break;
+	case USB_DR_MODE_HOST:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_HOST);
+		break;
+	case USB_DR_MODE_OTG:
+		ret = cdns_init_otg_mode(cdns);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n",
+			cdns->dr_mode);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static irqreturn_t cdns_drd_thread_irq(int irq, void *data)
+{
+	struct cdns *cdns = data;
+
+	cdns_hw_role_switch(cdns);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * cdns_drd_irq - interrupt handler for OTG events
+ *
+ * @irq: irq number for cdns core device
+ * @data: structure of cdns
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns_drd_irq(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+	struct cdns *cdns = data;
+	u32 reg;
+
+	if (cdns->dr_mode != USB_DR_MODE_OTG)
+		return IRQ_NONE;
+
+	if (cdns->in_lpm)
+		return ret;
+
+	reg = readl(&cdns->otg_irq_regs->ivect);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (reg & OTGIEN_ID_CHANGE_INT) {
+		dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
+			cdns_get_id(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) {
+		dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n",
+			cdns_get_vbus(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	writel(~0, &cdns->otg_irq_regs->ivect);
+	return ret;
+}
+
+int cdns_drd_init(struct cdns *cdns)
+{
+	void __iomem *regs;
+	u32 state;
+	int ret;
+
+	regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	/* Detection of DRD version. Controller has been released
+	 * in three versions. All are very similar and are software compatible,
+	 * but they have same changes in register maps.
+	 * The first register in oldest version is command register and it's
+	 * read only. Driver should read 0 from it. On the other hand, in v1
+	 * and v2 the first register contains device ID number which is not
+	 * set to 0. Driver uses this fact to detect the proper version of
+	 * controller.
+	 */
+	cdns->otg_v0_regs = regs;
+	if (!readl(&cdns->otg_v0_regs->cmd)) {
+		cdns->version  = CDNS3_CONTROLLER_V0;
+		cdns->otg_v1_regs = NULL;
+		cdns->otg_cdnsp_regs = NULL;
+		cdns->otg_regs = regs;
+		cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem  *)
+				     &cdns->otg_v0_regs->ien;
+		writel(1, &cdns->otg_v0_regs->simulate);
+		dev_dbg(cdns->dev, "DRD version v0 (%08x)\n",
+			 readl(&cdns->otg_v0_regs->version));
+	} else {
+		cdns->otg_v0_regs = NULL;
+		cdns->otg_v1_regs = regs;
+		cdns->otg_cdnsp_regs = regs;
+
+		cdns->otg_regs = (void __iomem *)&cdns->otg_v1_regs->cmd;
+
+		if (readl(&cdns->otg_cdnsp_regs->did) == OTG_CDNSP_DID) {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_cdnsp_regs->ien;
+			cdns->version  = CDNSP_CONTROLLER_V2;
+		} else {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_v1_regs->ien;
+			writel(1, &cdns->otg_v1_regs->simulate);
+			cdns->version  = CDNS3_CONTROLLER_V1;
+		}
+
+		dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+			 readl(&cdns->otg_v1_regs->did),
+			 readl(&cdns->otg_v1_regs->rid));
+	}
+
+	state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
+
+	/* Update dr_mode according to STRAP configuration. */
+	cdns->dr_mode = USB_DR_MODE_OTG;
+
+	if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_CDNSP_STRAP_HOST) ||
+	    (cdns->version != CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_STRAP_HOST)) {
+		dev_dbg(cdns->dev, "Controller strapped to HOST\n");
+		cdns->dr_mode = USB_DR_MODE_HOST;
+	} else if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_CDNSP_STRAP_GADGET) ||
+		   (cdns->version != CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_STRAP_GADGET)) {
+		dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
+		cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq,
+					cdns_drd_irq,
+					cdns_drd_thread_irq,
+					IRQF_SHARED,
+					dev_name(cdns->dev), cdns);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't get otg_irq\n");
+		return ret;
+	}
+
+	state = readl(&cdns->otg_regs->sts);
+	if (OTGSTS_OTG_NRDY(state)) {
+		dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int cdns_drd_exit(struct cdns *cdns)
+{
+	cdns_otg_disable_irq(cdns);
+
+	return 0;
+}
+
+
+/* Indicate the cdns3 core was power lost before */
+bool cdns_power_is_lost(struct cdns *cdns)
+{
+	if (cdns->version == CDNS3_CONTROLLER_V0) {
+		if (!(readl(&cdns->otg_v0_regs->simulate) & BIT(0)))
+			return true;
+	} else {
+		if (!(readl(&cdns->otg_v1_regs->simulate) & BIT(0)))
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(cdns_power_is_lost);