Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1285 insertions, 0 deletions

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
new file mode 100644
index 000000000..acdb13316
--- /dev/null
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -0,0 +1,1285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include "ci_hdrc_imx.h"
+
+#define MX25_USB_PHY_CTRL_OFFSET	0x08
+#define MX25_BM_EXTERNAL_VBUS_DIVIDER	BIT(23)
+
+#define MX25_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MX25_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MX25_EHCI_INTERFACE_MASK	(0xf)
+
+#define MX25_OTG_SIC_SHIFT		29
+#define MX25_OTG_SIC_MASK		(0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT			BIT(24)
+#define MX25_OTG_PP_BIT			BIT(11)
+#define MX25_OTG_OCPOL_BIT		BIT(3)
+
+#define MX25_H1_SIC_SHIFT		21
+#define MX25_H1_SIC_MASK		(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT			BIT(18)
+#define MX25_H1_PM_BIT			BIT(16)
+#define MX25_H1_IPPUE_UP_BIT		BIT(7)
+#define MX25_H1_IPPUE_DOWN_BIT		BIT(6)
+#define MX25_H1_TLL_BIT			BIT(5)
+#define MX25_H1_USBTE_BIT		BIT(4)
+#define MX25_H1_OCPOL_BIT		BIT(2)
+
+#define MX27_H1_PM_BIT			BIT(8)
+#define MX27_H2_PM_BIT			BIT(16)
+#define MX27_OTG_PM_BIT			BIT(24)
+
+#define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08
+#define MX53_USB_OTG_PHY_CTRL_1_OFFSET	0x0c
+#define MX53_USB_CTRL_1_OFFSET	        0x10
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
+#define MX53_USB_UH2_CTRL_OFFSET	0x14
+#define MX53_USB_UH3_CTRL_OFFSET	0x18
+#define MX53_USB_CLKONOFF_CTRL_OFFSET	0x24
+#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
+#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
+#define MX53_BM_OVER_CUR_DIS_H1		BIT(5)
+#define MX53_BM_OVER_CUR_DIS_OTG	BIT(8)
+#define MX53_BM_OVER_CUR_DIS_UHx	BIT(30)
+#define MX53_USB_CTRL_1_UH2_ULPI_EN	BIT(26)
+#define MX53_USB_CTRL_1_UH3_ULPI_EN	BIT(27)
+#define MX53_USB_UHx_CTRL_WAKE_UP_EN	BIT(7)
+#define MX53_USB_UHx_CTRL_ULPI_INT_EN	BIT(8)
+#define MX53_USB_PHYCTRL1_PLLDIV_MASK	0x3
+#define MX53_USB_PLL_DIV_24_MHZ		0x01
+
+#define MX6_BM_NON_BURST_SETTING	BIT(1)
+#define MX6_BM_OVER_CUR_DIS		BIT(7)
+#define MX6_BM_OVER_CUR_POLARITY	BIT(8)
+#define MX6_BM_PWR_POLARITY		BIT(9)
+#define MX6_BM_WAKEUP_ENABLE		BIT(10)
+#define MX6_BM_UTMI_ON_CLOCK		BIT(13)
+#define MX6_BM_ID_WAKEUP		BIT(16)
+#define MX6_BM_VBUS_WAKEUP		BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN		BIT(29)
+#define MX6_BM_WAKEUP_INTR		BIT(31)
+
+#define MX6_USB_HSIC_CTRL_OFFSET	0x10
+/* Send resume signal without 480Mhz PHY clock */
+#define MX6SX_BM_HSIC_AUTO_RESUME	BIT(23)
+/* set before portsc.suspendM = 1 */
+#define MX6_BM_HSIC_DEV_CONN		BIT(21)
+/* HSIC enable */
+#define MX6_BM_HSIC_EN			BIT(12)
+/* Force HSIC module 480M clock on, even when in Host is in suspend mode */
+#define MX6_BM_HSIC_CLK_ON		BIT(11)
+
+#define MX6_USB_OTG1_PHY_CTRL		0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL		0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v)	(v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS	MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
+
+#define VF610_OVER_CUR_DIS		BIT(7)
+
+#define MX7D_USBNC_USB_CTRL2		0x4
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK	0x3
+#define MX7D_USB_VBUS_WAKEUP_SOURCE(v)		(v << 0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS	MX7D_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+#define MX7D_USBNC_AUTO_RESUME				BIT(2)
+/* The default DM/DP value is pull-down */
+#define MX7D_USBNC_USB_CTRL2_OPMODE(v)			(v << 6)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING	MX7D_USBNC_USB_CTRL2_OPMODE(1)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK	(BIT(7) | BIT(6))
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN		BIT(8)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL		BIT(12)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN		BIT(13)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL		BIT(14)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN		BIT(15)
+#define MX7D_USBNC_USB_CTRL2_DP_DM_MASK			(BIT(12) | BIT(13) | \
+							BIT(14) | BIT(15))
+
+#define MX7D_USB_OTG_PHY_CFG1		0x30
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL	BIT(0)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0	BIT(1)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0	BIT(2)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB	BIT(3)
+#define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0		BIT(16)
+
+#define MX7D_USB_OTG_PHY_CFG2		0x34
+
+#define MX7D_USB_OTG_PHY_STATUS		0x3c
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0	BIT(0)
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1	BIT(1)
+#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD	BIT(3)
+#define MX7D_USB_OTG_PHY_STATUS_CHRGDET		BIT(29)
+
+#define MX7D_USB_OTG_PHY_CFG1		0x30
+#define TXPREEMPAMPTUNE0_BIT		28
+#define TXPREEMPAMPTUNE0_MASK		(3 << 28)
+#define TXVREFTUNE0_BIT			20
+#define TXVREFTUNE0_MASK		(0xf << 20)
+
+#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
+				 MX6_BM_ID_WAKEUP)
+
+struct usbmisc_ops {
+	/* It's called once when probe a usb device */
+	int (*init)(struct imx_usbmisc_data *data);
+	/* It's called once after adding a usb device */
+	int (*post)(struct imx_usbmisc_data *data);
+	/* It's called when we need to enable/disable usb wakeup */
+	int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
+	/* It's called before setting portsc.suspendM */
+	int (*hsic_set_connect)(struct imx_usbmisc_data *data);
+	/* It's called during suspend/resume */
+	int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
+	/* usb charger detection */
+	int (*charger_detection)(struct imx_usbmisc_data *data);
+	/* It's called when system resume from usb power lost */
+	int (*power_lost_check)(struct imx_usbmisc_data *data);
+};
+
+struct imx_usbmisc {
+	void __iomem *base;
+	spinlock_t lock;
+	const struct usbmisc_ops *ops;
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data);
+
+static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val = 0;
+
+	if (data->index > 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	switch (data->index) {
+	case 0:
+		val = readl(usbmisc->base);
+		val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
+		val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+		val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
+
+		/*
+		 * If the polarity is not configured assume active high for
+		 * historical reasons.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			val &= ~MX25_OTG_OCPOL_BIT;
+
+		writel(val, usbmisc->base);
+		break;
+	case 1:
+		val = readl(usbmisc->base);
+		val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT |  MX25_H1_IPPUE_UP_BIT);
+		val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+		val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
+
+		/*
+		 * If the polarity is not configured assume active high for
+		 * historical reasons.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			val &= ~MX25_H1_OCPOL_BIT;
+
+		writel(val, usbmisc->base);
+
+		break;
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	void __iomem *reg;
+	unsigned long flags;
+	u32 val;
+
+	if (data->index > 2)
+		return -EINVAL;
+
+	if (data->index)
+		return 0;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
+	val = readl(reg);
+
+	if (data->evdo)
+		val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
+	else
+		val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
+
+	writel(val, reg);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+	usleep_range(5000, 10000); /* needed to stabilize voltage */
+
+	return 0;
+}
+
+static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	switch (data->index) {
+	case 0:
+		val = MX27_OTG_PM_BIT;
+		break;
+	case 1:
+		val = MX27_H1_PM_BIT;
+		break;
+	case 2:
+		val = MX27_H2_PM_BIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	if (data->disable_oc)
+		val = readl(usbmisc->base) | val;
+	else
+		val = readl(usbmisc->base) & ~val;
+	writel(val, usbmisc->base);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	u32 val = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	/* Select a 24 MHz reference clock for the PHY  */
+	val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+	val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
+	val |= MX53_USB_PLL_DIV_24_MHZ;
+	writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	switch (data->index) {
+	case 0:
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
+			writel(val, reg);
+		}
+		break;
+	case 1:
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
+			writel(val, reg);
+		}
+		break;
+	case 2:
+		if (data->ulpi) {
+			/* set USBH2 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+			if (is_imx53_usbmisc(data)) {
+				/* Disable internal 60Mhz clock */
+				reg = usbmisc->base +
+					MX53_USB_CLKONOFF_CTRL_OFFSET;
+				val = readl(reg) |
+					MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
+				writel(val, reg);
+			}
+
+		}
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
+		break;
+	case 3:
+		if (data->ulpi) {
+			/* set USBH3 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+
+			if (is_imx53_usbmisc(data)) {
+				/* Disable internal 60Mhz clock */
+				reg = usbmisc->base +
+					MX53_USB_CLKONOFF_CTRL_OFFSET;
+				val = readl(reg) |
+					MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
+				writel(val, reg);
+			}
+		}
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
+		break;
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
+{
+	u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
+
+	if (data->ext_id || data->available_role != USB_DR_MODE_OTG)
+		wakeup_setting &= ~MX6_BM_ID_WAKEUP;
+
+	if (data->ext_vbus || data->available_role == USB_DR_MODE_HOST)
+		wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
+
+	return wakeup_setting;
+}
+
+static int usbmisc_imx6q_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	int ret = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + data->index * 4);
+	if (enabled) {
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+	}
+	writel(val, usbmisc->base + data->index * 4);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return ret;
+}
+
+static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	reg = readl(usbmisc->base + data->index * 4);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+	writel(reg, usbmisc->base + data->index * 4);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base + data->index * 4);
+	writel(reg | MX6_BM_NON_BURST_SETTING,
+			usbmisc->base + data->index * 4);
+
+	/* For HSIC controller */
+	if (data->hsic) {
+		reg = readl(usbmisc->base + data->index * 4);
+		writel(reg | MX6_BM_UTMI_ON_CLOCK,
+			usbmisc->base + data->index * 4);
+		reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+			+ (data->index - 2) * 4);
+		reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+		writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+			+ (data->index - 2) * 4);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx6q_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
+{
+	int offset, ret = 0;
+
+	if (data->index == 2 || data->index == 3) {
+		offset = (data->index - 2) * 4;
+	} else if (data->index == 0) {
+		/*
+		 * For SoCs like i.MX7D and later, each USB controller has
+		 * its own non-core register region. For SoCs before i.MX7D,
+		 * the first two USB controllers are non-HSIC controllers.
+		 */
+		offset = 0;
+	} else {
+		dev_err(data->dev, "index is error for usbmisc\n");
+		ret = -EINVAL;
+	}
+
+	return ret ? ret : offset;
+}
+
+static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+	unsigned long flags;
+	u32 val;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	int offset;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	offset = usbmisc_imx6_hsic_get_reg_offset(data);
+	if (offset < 0) {
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+		return offset;
+	}
+
+	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	if (!(val & MX6_BM_HSIC_DEV_CONN))
+		writel(val | MX6_BM_HSIC_DEV_CONN,
+			usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+	unsigned long flags;
+	u32 val;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	int offset;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	offset = usbmisc_imx6_hsic_get_reg_offset(data);
+	if (offset < 0) {
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+		return offset;
+	}
+
+	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+	if (on)
+		val |= MX6_BM_HSIC_CLK_ON;
+	else
+		val &= ~MX6_BM_HSIC_CLK_ON;
+
+	writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 val;
+
+	usbmisc_imx6q_init(data);
+
+	if (data->index == 0 || data->index == 1) {
+		reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+		spin_lock_irqsave(&usbmisc->lock, flags);
+		/* Set vbus wakeup source as bvalid */
+		val = readl(reg);
+		writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+		/*
+		 * Disable dp/dm wakeup in device mode when vbus is
+		 * not there.
+		 */
+		val = readl(usbmisc->base + data->index * 4);
+		writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+			usbmisc->base + data->index * 4);
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+	}
+
+	/* For HSIC controller */
+	if (data->hsic) {
+		val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+		val |= MX6SX_BM_HSIC_AUTO_RESUME;
+		writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+	}
+
+	return 0;
+}
+
+static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 reg;
+
+	/*
+	 * Vybrid only has one misc register set, but in two different
+	 * areas. These is reflected in two instances of this driver.
+	 */
+	if (data->index >= 1)
+		return -EINVAL;
+
+	if (data->disable_oc) {
+		reg = readl(usbmisc->base);
+		writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
+	}
+
+	return 0;
+}
+
+static int usbmisc_imx7d_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base);
+	if (enabled) {
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
+		writel(val, usbmisc->base);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			dev_dbg(data->dev, "wakeup int\n");
+		writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index >= 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = readl(usbmisc->base);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+	writel(reg, usbmisc->base);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base);
+	writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+	if (!data->hsic) {
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+		writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
+			| MX7D_USBNC_AUTO_RESUME,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		/* PHY tuning for signal quality */
+		reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+		if (data->emp_curr_control && data->emp_curr_control <=
+			(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+			reg &= ~TXPREEMPAMPTUNE0_MASK;
+			reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+		}
+
+		if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+			(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+			reg &= ~TXVREFTUNE0_MASK;
+			reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+		}
+
+		writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx7d_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	int val;
+	unsigned long flags;
+
+	/* Clear VDATSRCENB0 to disable VDP_SRC and IDM_SNK required by BC 1.2 spec */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0;
+	writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDMSRC_DIS */
+	msleep(20);
+
+	/* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL,
+				usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDMSRC_ON */
+	msleep(40);
+
+	/*
+	 * Per BC 1.2, check voltage of D+:
+	 * DCP: if greater than VDAT_REF;
+	 * CDP: if less than VDAT_REF.
+	 */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) {
+		dev_dbg(data->dev, "It is a dedicate charging port\n");
+		usb_phy->chg_type = DCP_TYPE;
+	} else {
+		dev_dbg(data->dev, "It is a charging downstream port\n");
+		usb_phy->chg_type = CDP_TYPE;
+	}
+
+	return 0;
+}
+
+static void imx7_disable_charger_detector(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL);
+	writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+
+	/* Set OPMODE to be 2'b00 and disable its override */
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+	writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
+static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	int i, data_pin_contact_count = 0;
+
+	/* Enable Data Contact Detect (DCD) per the USB BC 1.2 */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+			usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	for (i = 0; i < 100; i = i + 1) {
+		val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+		if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) {
+			if (data_pin_contact_count++ > 5)
+				/* Data pin makes contact */
+				break;
+			usleep_range(5000, 10000);
+		} else {
+			data_pin_contact_count = 0;
+			usleep_range(5000, 6000);
+		}
+	}
+
+	/* Disable DCD after finished data contact check */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+			usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	if (i == 100) {
+		dev_err(data->dev,
+			"VBUS is coming from a dedicated power supply.\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	unsigned long flags;
+	u32 val;
+
+	/* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL;
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0,
+				usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDPSRC_ON */
+	msleep(40);
+
+	/* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) {
+		dev_dbg(data->dev, "It is a standard downstream port\n");
+		usb_phy->chg_type = SDP_TYPE;
+	}
+
+	return 0;
+}
+
+/*
+ * Whole charger detection process:
+ * 1. OPMODE override to be non-driving
+ * 2. Data contact check
+ * 3. Primary detection
+ * 4. Secondary detection
+ * 5. Disable charger detection
+ */
+static int imx7d_charger_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	/* Check if vbus is valid */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) {
+		dev_err(data->dev, "vbus is error\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Keep OPMODE to be non-driving mode during the whole
+	 * charger detection process.
+	 */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+	val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING;
+	writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	ret = imx7d_charger_data_contact_detect(data);
+	if (ret)
+		return ret;
+
+	ret = imx7d_charger_primary_detection(data);
+	if (!ret && usb_phy->chg_type != SDP_TYPE)
+		ret = imx7d_charger_secondary_detection(data);
+
+	imx7_disable_charger_detector(data);
+
+	return ret;
+}
+
+static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index >= 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = readl(usbmisc->base);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+
+	writel(reg, usbmisc->base);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base);
+	writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+	if (data->hsic) {
+		reg = readl(usbmisc->base);
+		writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
+
+		reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+		reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+		writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+
+		/*
+		 * For non-HSIC controller, the autoresume is enabled
+		 * at MXS PHY driver (usbphy_ctrl bit18).
+		 */
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		writel(reg | MX7D_USBNC_AUTO_RESUME,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	} else {
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+		writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+			 usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx7d_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int usbmisc_imx7d_power_lost_check(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+	/*
+	 * Here use a power on reset value to judge
+	 * if the controller experienced a power lost
+	 */
+	if (val == 0x30001000)
+		return 1;
+	else
+		return 0;
+}
+
+static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + data->index * 4);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+	/*
+	 * Here use a power on reset value to judge
+	 * if the controller experienced a power lost
+	 */
+	if (val == 0x30001000)
+		return 1;
+	else
+		return 0;
+}
+
+static const struct usbmisc_ops imx25_usbmisc_ops = {
+	.init = usbmisc_imx25_init,
+	.post = usbmisc_imx25_post,
+};
+
+static const struct usbmisc_ops imx27_usbmisc_ops = {
+	.init = usbmisc_imx27_init,
+};
+
+static const struct usbmisc_ops imx51_usbmisc_ops = {
+	.init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx53_usbmisc_ops = {
+	.init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx6q_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6q_init,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk   = usbmisc_imx6_hsic_set_clk,
+};
+
+static const struct usbmisc_ops vf610_usbmisc_ops = {
+	.init = usbmisc_vf610_init,
+};
+
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6sx_init,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+	.power_lost_check = usbmisc_imx6sx_power_lost_check,
+};
+
+static const struct usbmisc_ops imx7d_usbmisc_ops = {
+	.init = usbmisc_imx7d_init,
+	.set_wakeup = usbmisc_imx7d_set_wakeup,
+	.charger_detection = imx7d_charger_detection,
+	.power_lost_check = usbmisc_imx7d_power_lost_check,
+};
+
+static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
+	.init = usbmisc_imx7ulp_init,
+	.set_wakeup = usbmisc_imx7d_set_wakeup,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+	.power_lost_check = usbmisc_imx7d_power_lost_check,
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+
+	return usbmisc->ops == &imx53_usbmisc_ops;
+}
+
+int imx_usbmisc_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->init)
+		return 0;
+	return usbmisc->ops->init(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init);
+
+int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+	int ret = 0;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (usbmisc->ops->post)
+		ret = usbmisc->ops->post(data);
+	if (ret) {
+		dev_err(data->dev, "post init failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (usbmisc->ops->set_wakeup)
+		ret = usbmisc->ops->set_wakeup(data, false);
+	if (ret) {
+		dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
+
+int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->hsic_set_connect || !data->hsic)
+		return 0;
+	return usbmisc->ops->hsic_set_connect(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
+
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect)
+{
+	struct imx_usbmisc *usbmisc;
+	struct usb_phy *usb_phy;
+	int ret = 0;
+
+	if (!data)
+		return -EINVAL;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	usb_phy = data->usb_phy;
+	if (!usbmisc->ops->charger_detection)
+		return -ENOTSUPP;
+
+	if (connect) {
+		ret = usbmisc->ops->charger_detection(data);
+		if (ret) {
+			dev_err(data->dev,
+					"Error occurs during detection: %d\n",
+					ret);
+			usb_phy->chg_state = USB_CHARGER_ABSENT;
+		} else {
+			usb_phy->chg_state = USB_CHARGER_PRESENT;
+		}
+	} else {
+		usb_phy->chg_state = USB_CHARGER_ABSENT;
+		usb_phy->chg_type = UNKNOWN_TYPE;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection);
+
+int imx_usbmisc_suspend(struct imx_usbmisc_data *data, bool wakeup)
+{
+	struct imx_usbmisc *usbmisc;
+	int ret = 0;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+
+	if (wakeup && usbmisc->ops->set_wakeup)
+		ret = usbmisc->ops->set_wakeup(data, true);
+	if (ret) {
+		dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (usbmisc->ops->hsic_set_clk && data->hsic)
+		ret = usbmisc->ops->hsic_set_clk(data, false);
+	if (ret) {
+		dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_suspend);
+
+int imx_usbmisc_resume(struct imx_usbmisc_data *data, bool wakeup)
+{
+	struct imx_usbmisc *usbmisc;
+	int ret = 0;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+
+	if (usbmisc->ops->power_lost_check)
+		ret = usbmisc->ops->power_lost_check(data);
+	if (ret > 0) {
+		/* re-init if resume from power lost */
+		ret = imx_usbmisc_init(data);
+		if (ret) {
+			dev_err(data->dev, "re-init failed, ret=%d\n", ret);
+			return ret;
+		}
+	}
+
+	if (wakeup && usbmisc->ops->set_wakeup)
+		ret = usbmisc->ops->set_wakeup(data, false);
+	if (ret) {
+		dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (usbmisc->ops->hsic_set_clk && data->hsic)
+		ret = usbmisc->ops->hsic_set_clk(data, true);
+	if (ret) {
+		dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+		goto hsic_set_clk_fail;
+	}
+
+	return 0;
+
+hsic_set_clk_fail:
+	if (wakeup && usbmisc->ops->set_wakeup)
+		usbmisc->ops->set_wakeup(data, true);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_resume);
+
+static const struct of_device_id usbmisc_imx_dt_ids[] = {
+	{
+		.compatible = "fsl,imx25-usbmisc",
+		.data = &imx25_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx35-usbmisc",
+		.data = &imx25_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx27-usbmisc",
+		.data = &imx27_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx51-usbmisc",
+		.data = &imx51_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx53-usbmisc",
+		.data = &imx53_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6q-usbmisc",
+		.data = &imx6q_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,vf610-usbmisc",
+		.data = &vf610_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6sx-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6ul-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx7d-usbmisc",
+		.data = &imx7d_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx7ulp-usbmisc",
+		.data = &imx7ulp_usbmisc_ops,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
+
+static int usbmisc_imx_probe(struct platform_device *pdev)
+{
+	struct imx_usbmisc *data;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+
+	data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->ops = of_device_get_match_data(&pdev->dev);
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int usbmisc_imx_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver usbmisc_imx_driver = {
+	.probe = usbmisc_imx_probe,
+	.remove = usbmisc_imx_remove,
+	.driver = {
+		.name = "usbmisc_imx",
+		.of_match_table = usbmisc_imx_dt_ids,
+	 },
+};
+
+module_platform_driver(usbmisc_imx_driver);
+
+MODULE_ALIAS("platform:usbmisc-imx");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for imx usb non-core registers");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");