Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 493 insertions, 0 deletions

diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c
new file mode 100644
index 000000000..8db5c91ae
--- /dev/null
+++ b/drivers/usb/gadget/legacy/multi.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * multi.c -- Multifunction Composite driver
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+
+#include "u_serial.h"
+#if defined USB_ETH_RNDIS
+#  undef USB_ETH_RNDIS
+#endif
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+#  define USB_ETH_RNDIS y
+#endif
+
+
+#define DRIVER_DESC		"Multifunction Composite Gadget"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
+
+
+#include "f_mass_storage.h"
+
+#include "u_ecm.h"
+#ifdef USB_ETH_RNDIS
+#  include "u_rndis.h"
+#  include "rndis.h"
+#endif
+#include "u_ether.h"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+/***************************** Device Descriptor ****************************/
+
+#define MULTI_VENDOR_NUM	0x1d6b	/* Linux Foundation */
+#define MULTI_PRODUCT_NUM	0x0104	/* Multifunction Composite Gadget */
+
+
+enum {
+	__MULTI_NO_CONFIG,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+	MULTI_RNDIS_CONFIG_NUM,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_CDC_CONFIG_NUM,
+#endif
+};
+
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(MULTI_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(MULTI_PRODUCT_NUM),
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+enum {
+	MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX,
+	MULTI_STRING_CDC_CONFIG_IDX,
+};
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
+	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&(struct usb_gadget_strings){
+		.language	= 0x0409,	/* en-us */
+		.strings	= strings_dev,
+	},
+	NULL,
+};
+
+
+
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct usb_function_instance *fi_acm;
+static struct usb_function_instance *fi_msg;
+
+/********** RNDIS **********/
+
+#ifdef USB_ETH_RNDIS
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_acm_rndis;
+static struct usb_function *f_rndis;
+static struct usb_function *f_msg_rndis;
+
+static int rndis_do_config(struct usb_configuration *c)
+{
+	int ret;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	ret = usb_add_function(c, f_rndis);
+	if (ret < 0)
+		goto err_func_rndis;
+
+	f_acm_rndis = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm_rndis)) {
+		ret = PTR_ERR(f_acm_rndis);
+		goto err_func_acm;
+	}
+
+	ret = usb_add_function(c, f_acm_rndis);
+	if (ret)
+		goto err_conf;
+
+	f_msg_rndis = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_rndis)) {
+		ret = PTR_ERR(f_msg_rndis);
+		goto err_fsg;
+	}
+
+	ret = usb_add_function(c, f_msg_rndis);
+	if (ret)
+		goto err_run;
+
+	return 0;
+err_run:
+	usb_put_function(f_msg_rndis);
+err_fsg:
+	usb_remove_function(c, f_acm_rndis);
+err_conf:
+	usb_put_function(f_acm_rndis);
+err_func_acm:
+	usb_remove_function(c, f_rndis);
+err_func_rndis:
+	usb_put_function(f_rndis);
+	return ret;
+}
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bConfigurationValue	= MULTI_RNDIS_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config, rndis_do_config);
+}
+
+#else
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+#endif
+
+
+/********** CDC ECM **********/
+
+#ifdef CONFIG_USB_G_MULTI_CDC
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_acm_multi;
+static struct usb_function *f_ecm;
+static struct usb_function *f_msg_multi;
+
+static int cdc_do_config(struct usb_configuration *c)
+{
+	int ret;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm))
+		return PTR_ERR(f_ecm);
+
+	ret = usb_add_function(c, f_ecm);
+	if (ret < 0)
+		goto err_func_ecm;
+
+	/* implicit port_num is zero */
+	f_acm_multi = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm_multi)) {
+		ret = PTR_ERR(f_acm_multi);
+		goto err_func_acm;
+	}
+
+	ret = usb_add_function(c, f_acm_multi);
+	if (ret)
+		goto err_conf;
+
+	f_msg_multi = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_multi)) {
+		ret = PTR_ERR(f_msg_multi);
+		goto err_fsg;
+	}
+
+	ret = usb_add_function(c, f_msg_multi);
+	if (ret)
+		goto err_run;
+
+	return 0;
+err_run:
+	usb_put_function(f_msg_multi);
+err_fsg:
+	usb_remove_function(c, f_acm_multi);
+err_conf:
+	usb_put_function(f_acm_multi);
+err_func_acm:
+	usb_remove_function(c, f_ecm);
+err_func_ecm:
+	usb_put_function(f_ecm);
+	return ret;
+}
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bConfigurationValue	= MULTI_CDC_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config, cdc_do_config);
+}
+
+#else
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+#endif
+
+
+
+/****************************** Gadget Bind ******************************/
+
+static int multi_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+#ifdef CONFIG_USB_G_MULTI_CDC
+	struct f_ecm_opts *ecm_opts;
+#endif
+#ifdef USB_ETH_RNDIS
+	struct f_rndis_opts *rndis_opts;
+#endif
+	struct fsg_opts *fsg_opts;
+	struct fsg_config config;
+	int status;
+
+	if (!can_support_ecm(cdev->gadget)) {
+		dev_err(&gadget->dev, "controller '%s' not usable\n",
+			gadget->name);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_USB_G_MULTI_CDC
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm))
+		return PTR_ERR(fi_ecm);
+
+	ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+	gether_set_qmult(ecm_opts->net, qmult);
+	if (!gether_set_host_addr(ecm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#ifdef USB_ETH_RNDIS
+	fi_rndis = usb_get_function_instance("rndis");
+	if (IS_ERR(fi_rndis)) {
+		status = PTR_ERR(fi_rndis);
+		goto fail;
+	}
+
+	rndis_opts = container_of(fi_rndis, struct f_rndis_opts, func_inst);
+
+	gether_set_qmult(rndis_opts->net, qmult);
+	if (!gether_set_host_addr(rndis_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(rndis_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if (defined CONFIG_USB_G_MULTI_CDC && defined USB_ETH_RNDIS)
+	/*
+	 * If both ecm and rndis are selected then:
+	 *	1) rndis borrows the net interface from ecm
+	 *	2) since the interface is shared it must not be bound
+	 *	twice - in ecm's _and_ rndis' binds, so do it here.
+	 */
+	gether_set_gadget(ecm_opts->net, cdev->gadget);
+	status = gether_register_netdev(ecm_opts->net);
+	if (status)
+		goto fail0;
+
+	rndis_borrow_net(fi_rndis, ecm_opts->net);
+	ecm_opts->bound = true;
+#endif
+
+	/* set up serial link layer */
+	fi_acm = usb_get_function_instance("acm");
+	if (IS_ERR(fi_acm)) {
+		status = PTR_ERR(fi_acm);
+		goto fail0;
+	}
+
+	/* set up mass storage function */
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail1;
+	}
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+
+	fsg_opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers);
+	if (status)
+		goto fail2;
+
+	status = fsg_common_set_cdev(fsg_opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(fsg_opts->common, true);
+	status = fsg_common_create_luns(fsg_opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(fsg_opts->common, config.vendor_name,
+				      config.product_name);
+
+	/* allocate string IDs */
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (unlikely(status < 0))
+		goto fail_string_ids;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail_string_ids;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register configurations */
+	status = rndis_config_register(cdev);
+	if (unlikely(status < 0))
+		goto fail_otg_desc;
+
+	status = cdc_config_register(cdev);
+	if (unlikely(status < 0))
+		goto fail_otg_desc;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+
+	/* we're done */
+	dev_info(&gadget->dev, DRIVER_DESC "\n");
+	return 0;
+
+
+	/* error recovery */
+fail_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_string_ids:
+	fsg_common_remove_luns(fsg_opts->common);
+fail_set_cdev:
+	fsg_common_free_buffers(fsg_opts->common);
+fail2:
+	usb_put_function_instance(fi_msg);
+fail1:
+	usb_put_function_instance(fi_acm);
+fail0:
+#ifdef USB_ETH_RNDIS
+	usb_put_function_instance(fi_rndis);
+fail:
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function_instance(fi_ecm);
+#endif
+	return status;
+}
+
+static int multi_unbind(struct usb_composite_dev *cdev)
+{
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_msg_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_msg_rndis);
+#endif
+	usb_put_function_instance(fi_msg);
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_acm_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_acm_rndis);
+#endif
+	usb_put_function_instance(fi_acm);
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_ecm);
+	usb_put_function_instance(fi_ecm);
+#endif
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+
+/****************************** Some noise ******************************/
+
+
+static struct usb_composite_driver multi_driver = {
+	.name		= "g_multi",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= multi_bind,
+	.unbind		= multi_unbind,
+	.needs_serial	= 1,
+};
+
+module_usb_composite_driver(multi_driver);