Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 473 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
new file mode 100644
index 000000000..511ab57cd
--- /dev/null
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -0,0 +1,473 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Gadget support on a system involves
+#    (a) a peripheral controller, and
+#    (b) the gadget driver using it.
+#
+# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+#  - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+#
+# USB Peripheral Controller Support
+#
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+#   - integrated/SOC controllers first
+#   - licensed IP used in both SOC and discrete versions
+#   - discrete ones (including all PCI-only controllers)
+#   - debug/dummy gadget+hcd is last.
+#
+menu "USB Peripheral Controller"
+
+#
+# Integrated controllers
+#
+
+config USB_AT91
+	tristate "Atmel AT91 USB Device Port"
+	depends on ARCH_AT91
+	depends on OF
+	help
+	   Many Atmel AT91 processors (such as the AT91RM2000) have a
+	   full speed USB Device Port with support for five configurable
+	   endpoints (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "at91_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_LPC32XX
+	tristate "LPC32XX USB Peripheral Controller"
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on I2C
+	select USB_ISP1301
+	help
+	   This option selects the USB device controller in the LPC32xx SoC.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "lpc32xx_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_ATMEL_USBA
+	tristate "Atmel USBA"
+	depends on ARCH_AT91
+	help
+	  USBA is the integrated high-speed USB Device controller on some
+	  AT91SAM9 and AT91CAP9 processors from Atmel.
+
+	  The fifo_mode parameter is used to select endpoint allocation mode.
+	  fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
+	  In this case, for ep1 2 banks are allocated if it works in isochronous
+	  mode and only 1 bank otherwise. For the rest of the endpoints
+	  only 1 bank is allocated.
+
+	  fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration
+	  allowing the usage of ep1 - ep6
+
+	  fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes)
+	  configuration allowing the usage of ep1 - ep3
+
+	  fifo_mode = 3 is a balanced performance configuration allowing the
+	  the usage of ep1 - ep8
+
+config USB_BCM63XX_UDC
+	tristate "Broadcom BCM63xx Peripheral Controller"
+	depends on BCM63XX
+	help
+	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
+	   high speed USB Device Port with support for four fixed endpoints
+	   (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "bcm63xx_udc".
+
+config USB_FSL_USB2
+	tristate "Freescale Highspeed USB DR Peripheral Controller"
+	depends on FSL_SOC
+	help
+	   Some of Freescale PowerPC and i.MX processors have a High Speed
+	   Dual-Role(DR) USB controller, which supports device mode.
+
+	   The number of programmable endpoints is different through
+	   SOC revisions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "fsl_usb2_udc" and force
+	   all gadget drivers to also be dynamically linked.
+
+config USB_FUSB300
+	tristate "Faraday FUSB300 USB Peripheral Controller"
+	depends on !PHYS_ADDR_T_64BIT && HAS_DMA
+	help
+	   Faraday usb device controller FUSB300 driver
+
+config USB_GR_UDC
+	tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+	depends on HAS_DMA
+	help
+	  Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+	  VHDL IP core library.
+
+config USB_OMAP
+	tristate "OMAP USB Device Controller"
+	depends on ARCH_OMAP1
+	help
+	   Many Texas Instruments OMAP processors have flexible full
+	   speed USB device controllers, with support for up to 30
+	   endpoints (plus endpoint zero).  This driver supports the
+	   controller in the OMAP 1611, and should work with controllers
+	   in other OMAP processors too, given minor tweaks.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "omap_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA25X
+	tristate "PXA 25x or IXP 4xx"
+	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+	depends on HAS_IOMEM
+	help
+	   Intel's PXA 25x series XScale ARM-5TE processors include
+	   an integrated full speed USB 1.1 device controller.  The
+	   controller in the IXP 4xx series is register-compatible.
+
+	   It has fifteen fixed-function endpoints, as well as endpoint
+	   zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa25x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+# if there's only one gadget driver, using only two bulk endpoints,
+# don't waste memory for the other endpoints
+config USB_PXA25X_SMALL
+	depends on USB_PXA25X
+	bool
+	default n if USB_ETH_RNDIS
+	default y if USB_ZERO
+	default y if USB_ETH
+	default y if USB_G_SERIAL
+
+config USB_R8A66597
+	tristate "Renesas R8A66597 USB Peripheral Controller"
+	depends on HAS_DMA
+	help
+	   R8A66597 is a discrete USB host and peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has nine configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "r8a66597_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_RENESAS_USBHS_UDC
+	tristate 'Renesas USBHS controller'
+	depends on USB_RENESAS_USBHS
+	help
+	   Renesas USBHS is a discrete USB host and peripheral controller chip
+	   that supports both full and high speed USB 2.0 data transfers.
+	   It has nine or more configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usbhs" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_RENESAS_USB3
+	tristate 'Renesas USB3.0 Peripheral controller'
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on EXTCON
+	select USB_ROLE_SWITCH
+	help
+	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
+	   that supports super, high, and full speed USB 3.0 data transfers.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usb3" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+	tristate "PXA 27x"
+	depends on HAS_IOMEM
+	help
+	   Intel's PXA 27x series XScale ARM v5TE processors include
+	   an integrated full speed USB 1.1 device controller.
+
+	   It has up to 23 endpoints, as well as endpoint zero (for
+	   control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa27x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_MV_UDC
+	tristate "Marvell USB2.0 Device Controller"
+	depends on HAS_DMA
+	help
+	  Marvell Socs (including PXA and MMP series) include a high speed
+	  USB2.0 OTG controller, which can be configured as high speed or
+	  full speed USB peripheral.
+
+config USB_MV_U3D
+	depends on HAS_DMA
+	tristate "MARVELL PXA2128 USB 3.0 controller"
+	help
+	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
+	  controller, which support super speed USB peripheral.
+
+config USB_SNP_CORE
+	depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
+	depends on HAS_DMA
+	tristate
+	help
+	  This enables core driver support for Synopsys USB 2.0 Device
+	  controller.
+
+	  This will be enabled when PCI or Platform driver for this UDC is
+	  selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or
+	  USB_AMD5536UDC options.
+
+	  This IP is different to the High Speed OTG IP that can be enabled
+	  by selecting USB_DWC2 or USB_DWC3 options.
+
+config USB_SNP_UDC_PLAT
+	tristate "Synopsys USB 2.0 Device controller"
+	depends on USB_GADGET && OF && HAS_DMA
+	depends on EXTCON || EXTCON=n
+	select USB_SNP_CORE
+	default ARCH_BCM_IPROC
+	help
+	  This adds Platform Device support for Synopsys Designware core
+	  AHB subsystem USB2.0 Device Controller (UDC).
+
+	  This driver works with UDCs integrated into Broadcom's Northstar2
+	  and Cygnus SoCs.
+
+	  If unsure, say N.
+#
+# Controllers available in both integrated and discrete versions
+#
+
+config USB_M66592
+	tristate "Renesas M66592 USB Peripheral Controller"
+	depends on HAS_IOMEM
+	help
+	   M66592 is a discrete USB peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has seven configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "m66592_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+source "drivers/usb/gadget/udc/bdc/Kconfig"
+
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_AMD5536UDC
+	tristate "AMD5536 UDC"
+	depends on USB_PCI && HAS_DMA
+	select USB_SNP_CORE
+	help
+	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
+	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+	   The UDC port supports OTG operation, and may be used as a host port
+	   if it's not being used to implement peripheral or OTG roles.
+
+	   This UDC is based on Synopsys USB device controller IP and selects
+	   CONFIG_USB_SNP_CORE option to build the core driver.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "amd5536udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_FSL_QE
+	tristate "Freescale QE/CPM USB Device Controller"
+	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
+	help
+	   Some of Freescale PowerPC processors have a Full Speed
+	   QE/CPM2 USB controller, which support device mode with 4
+	   programmable endpoints. This driver supports the
+	   controller in the MPC8360 and MPC8272, and should work with
+	   controllers having QE or CPM2, given minor tweaks.
+
+	   Set CONFIG_USB_GADGET to "m" to build this driver as a
+	   dynamically linked module called "fsl_qe_udc".
+
+config USB_NET2272
+	depends on HAS_IOMEM
+	tristate "PLX NET2272"
+	help
+	  PLX NET2272 is a USB peripheral controller which supports
+	  both full and high speed USB 2.0 data transfers.
+
+	  It has three configurable endpoints, as well as endpoint zero
+	  (for control transfer).
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "net2272" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_NET2272_DMA
+	bool "Support external DMA controller"
+	depends on USB_NET2272 && HAS_DMA
+	help
+	  The NET2272 part can optionally support an external DMA
+	  controller, but your board has to have support in the
+	  driver itself.
+
+	  If unsure, say "N" here.  The driver works fine in PIO mode.
+
+config USB_NET2280
+	tristate "NetChip NET228x / PLX USB3x8x"
+	depends on USB_PCI
+	help
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+	   supports both full and high speed USB 2.0 data transfers.
+
+	   It has six configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   PLX 2380 is a PCIe version of the PLX 2380.
+
+	   PLX 3380 / 3382 is a PCIe based USB peripheral controller which
+	   supports full, high speed USB 2.0 and super speed USB 3.0
+	   data transfers.
+
+	   It has eight configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "net2280" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_GOKU
+	tristate "Toshiba TC86C001 'Goku-S'"
+	depends on USB_PCI
+	help
+	   The Toshiba TC86C001 is a PCI device which includes controllers
+	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+	   The device controller has three configurable (bulk or interrupt)
+	   endpoints, plus endpoint zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "goku_udc" and to force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_EG20T
+	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+	depends on USB_PCI
+	help
+	  This is a USB device driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform. EG20T PCH has USB device interface.
+	  Using this interface, it is able to access system devices connected
+	  to USB device.
+	  This driver enables USB device function.
+	  USB device is a USB peripheral controller which
+	  supports both full and high speed USB 2.0 data transfers.
+	  This driver supports both control transfer and bulk transfer modes.
+	  This driver dose not support interrupt transfer or isochronous
+	  transfer modes.
+
+	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
+	  for IVI(In-Vehicle Infotainment) use.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
+
+	  This driver can be used with Intel's Quark X1000 SOC platform
+
+config USB_GADGET_XILINX
+	tristate "Xilinx USB Driver"
+	depends on HAS_DMA
+	depends on OF
+	help
+	  USB peripheral controller driver for Xilinx USB2 device.
+	  Xilinx USB2 device is a soft IP which supports both full
+	  and high speed USB 2.0 data transfers. It has seven configurable
+	  endpoints(bulk or interrupt or isochronous), as well as
+	  endpoint zero(for control transfers).
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "udc-xilinx" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_MAX3420_UDC
+	tristate "MAX3420 (USB-over-SPI) support"
+	depends on SPI
+	help
+	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
+	  The MAX3420 is run by SPI interface, and hence the dependency.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3420_udc
+
+config USB_TEGRA_XUDC
+	tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on PHY_TEGRA_XUSB
+	help
+	 Enables NVIDIA Tegra USB 3.0 device mode controller driver.
+
+	 Say "y" to link the driver statically, or "m" to build a
+	 dynamically linked module called "tegra_xudc" and force all
+	 gadget drivers to also be dynamically linked.
+
+config USB_ASPEED_UDC
+	tristate "Aspeed UDC driver support"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on USB_LIBCOMPOSITE
+	help
+	  Enables Aspeed USB2.0 Device Controller driver for AST260x
+	  family SoCs. The controller supports 1 control endpoint and
+	  4 programmable endpoints.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "aspeed_udc" and force all
+	  gadget drivers to also be dynamically linked.
+
+source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
+
+#
+# LAST -- dummy/emulated controller
+#
+
+config USB_DUMMY_HCD
+	tristate "Dummy HCD (DEVELOPMENT)"
+	depends on USB=y || (USB=m && USB_GADGET=m)
+	help
+	  This host controller driver emulates USB, looping all data transfer
+	  requests back to a USB "gadget driver" in the same host.  The host
+	  side is the controller; the gadget side is the device.  Gadget drivers
+	  can be high, full, or low speed; and they have access to endpoints
+	  like those from NET2280, PXA2xx, or SA1100 hardware.
+
+	  This may help in some stages of creating a driver to embed in a
+	  Linux device, since it lets you debug several parts of the gadget
+	  driver without its hardware or drivers being involved.
+
+	  Since such a gadget side driver needs to interoperate with a host
+	  side Linux-USB device driver, this may help to debug both sides
+	  of a USB protocol stack.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "dummy_hcd" and force all
+	  gadget drivers to also be dynamically linked.
+
+# NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
+# first and will be selected by default.
+
+endmenu