Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 591 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
new file mode 100644
index 000000000..2efc5a930
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2004,2012 Freescale Semiconductor, Inc
+ * All rights reserved.
+ *
+ * Freescale USB device/endpoint management registers
+ */
+#ifndef __FSL_USB2_UDC_H
+#define __FSL_USB2_UDC_H
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* ### define USB registers here
+ */
+#define USB_MAX_CTRL_PAYLOAD		64
+#define USB_DR_SYS_OFFSET		0x400
+
+ /* USB DR device mode registers (Little Endian) */
+struct usb_dr_device {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 deviceaddr;		/* Device Address */
+	u32 endpointlistaddr;	/* Endpoint List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[24];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u8 res7[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+};
+
+ /* USB DR host mode registers (Little Endian) */
+struct usb_dr_host {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 periodiclistbase;	/* Periodic Frame List Base Address Register */
+	u32 asynclistaddr;	/* Current Asynchronous List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[24];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u8 res7[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+};
+
+ /* non-EHCI USB system interface registers (Big Endian) */
+struct usb_sys_interface {
+	u32 snoop1;
+	u32 snoop2;
+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+	u32 pri_ctrl;		/* Priority Control Register */
+	u32 si_ctrl;		/* System Interface Control Register */
+	u8 res[236];
+	u32 control;		/* General Purpose Control Register */
+};
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP          0
+#define DATA_STATE_XMIT         1
+#define DATA_STATE_NEED_ZLP     2
+#define WAIT_FOR_OUT_STATUS     3
+#define DATA_STATE_RECV         4
+
+/* Device Controller Capability Parameter register */
+#define DCCPARAMS_DC				0x00000080
+#define DCCPARAMS_DEN_MASK			0x0000001f
+
+/* Frame Index Register Bit Masks */
+#define	USB_FRINDEX_MASKS			0x3fff
+/* USB CMD  Register Bit Masks */
+#define  USB_CMD_RUN_STOP                     0x00000001
+#define  USB_CMD_CTRL_RESET                   0x00000002
+#define  USB_CMD_PERIODIC_SCHEDULE_EN         0x00000010
+#define  USB_CMD_ASYNC_SCHEDULE_EN            0x00000020
+#define  USB_CMD_INT_AA_DOORBELL              0x00000040
+#define  USB_CMD_ASP                          0x00000300
+#define  USB_CMD_ASYNC_SCH_PARK_EN            0x00000800
+#define  USB_CMD_SUTW                         0x00002000
+#define  USB_CMD_ATDTW                        0x00004000
+#define  USB_CMD_ITC                          0x00FF0000
+
+/* bit 15,3,2 are frame list size */
+#define  USB_CMD_FRAME_SIZE_1024              0x00000000
+#define  USB_CMD_FRAME_SIZE_512               0x00000004
+#define  USB_CMD_FRAME_SIZE_256               0x00000008
+#define  USB_CMD_FRAME_SIZE_128               0x0000000C
+#define  USB_CMD_FRAME_SIZE_64                0x00008000
+#define  USB_CMD_FRAME_SIZE_32                0x00008004
+#define  USB_CMD_FRAME_SIZE_16                0x00008008
+#define  USB_CMD_FRAME_SIZE_8                 0x0000800C
+
+/* bit 9-8 are async schedule park mode count */
+#define  USB_CMD_ASP_00                       0x00000000
+#define  USB_CMD_ASP_01                       0x00000100
+#define  USB_CMD_ASP_10                       0x00000200
+#define  USB_CMD_ASP_11                       0x00000300
+#define  USB_CMD_ASP_BIT_POS                  8
+
+/* bit 23-16 are interrupt threshold control */
+#define  USB_CMD_ITC_NO_THRESHOLD             0x00000000
+#define  USB_CMD_ITC_1_MICRO_FRM              0x00010000
+#define  USB_CMD_ITC_2_MICRO_FRM              0x00020000
+#define  USB_CMD_ITC_4_MICRO_FRM              0x00040000
+#define  USB_CMD_ITC_8_MICRO_FRM              0x00080000
+#define  USB_CMD_ITC_16_MICRO_FRM             0x00100000
+#define  USB_CMD_ITC_32_MICRO_FRM             0x00200000
+#define  USB_CMD_ITC_64_MICRO_FRM             0x00400000
+#define  USB_CMD_ITC_BIT_POS                  16
+
+/* USB STS Register Bit Masks */
+#define  USB_STS_INT                          0x00000001
+#define  USB_STS_ERR                          0x00000002
+#define  USB_STS_PORT_CHANGE                  0x00000004
+#define  USB_STS_FRM_LST_ROLL                 0x00000008
+#define  USB_STS_SYS_ERR                      0x00000010
+#define  USB_STS_IAA                          0x00000020
+#define  USB_STS_RESET                        0x00000040
+#define  USB_STS_SOF                          0x00000080
+#define  USB_STS_SUSPEND                      0x00000100
+#define  USB_STS_HC_HALTED                    0x00001000
+#define  USB_STS_RCL                          0x00002000
+#define  USB_STS_PERIODIC_SCHEDULE            0x00004000
+#define  USB_STS_ASYNC_SCHEDULE               0x00008000
+
+/* USB INTR Register Bit Masks */
+#define  USB_INTR_INT_EN                      0x00000001
+#define  USB_INTR_ERR_INT_EN                  0x00000002
+#define  USB_INTR_PTC_DETECT_EN               0x00000004
+#define  USB_INTR_FRM_LST_ROLL_EN             0x00000008
+#define  USB_INTR_SYS_ERR_EN                  0x00000010
+#define  USB_INTR_ASYN_ADV_EN                 0x00000020
+#define  USB_INTR_RESET_EN                    0x00000040
+#define  USB_INTR_SOF_EN                      0x00000080
+#define  USB_INTR_DEVICE_SUSPEND              0x00000100
+
+/* Device Address bit masks */
+#define  USB_DEVICE_ADDRESS_MASK              0xFE000000
+#define  USB_DEVICE_ADDRESS_BIT_POS           25
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+
+/* PORTSCX  Register Bit Masks */
+#define  PORTSCX_CURRENT_CONNECT_STATUS       0x00000001
+#define  PORTSCX_CONNECT_STATUS_CHANGE        0x00000002
+#define  PORTSCX_PORT_ENABLE                  0x00000004
+#define  PORTSCX_PORT_EN_DIS_CHANGE           0x00000008
+#define  PORTSCX_OVER_CURRENT_ACT             0x00000010
+#define  PORTSCX_OVER_CURRENT_CHG             0x00000020
+#define  PORTSCX_PORT_FORCE_RESUME            0x00000040
+#define  PORTSCX_PORT_SUSPEND                 0x00000080
+#define  PORTSCX_PORT_RESET                   0x00000100
+#define  PORTSCX_LINE_STATUS_BITS             0x00000C00
+#define  PORTSCX_PORT_POWER                   0x00001000
+#define  PORTSCX_PORT_INDICTOR_CTRL           0x0000C000
+#define  PORTSCX_PORT_TEST_CTRL               0x000F0000
+#define  PORTSCX_WAKE_ON_CONNECT_EN           0x00100000
+#define  PORTSCX_WAKE_ON_CONNECT_DIS          0x00200000
+#define  PORTSCX_WAKE_ON_OVER_CURRENT         0x00400000
+#define  PORTSCX_PHY_LOW_POWER_SPD            0x00800000
+#define  PORTSCX_PORT_FORCE_FULL_SPEED        0x01000000
+#define  PORTSCX_PORT_SPEED_MASK              0x0C000000
+#define  PORTSCX_PORT_WIDTH                   0x10000000
+#define  PORTSCX_PHY_TYPE_SEL                 0xC0000000
+
+/* bit 11-10 are line status */
+#define  PORTSCX_LINE_STATUS_SE0              0x00000000
+#define  PORTSCX_LINE_STATUS_JSTATE           0x00000400
+#define  PORTSCX_LINE_STATUS_KSTATE           0x00000800
+#define  PORTSCX_LINE_STATUS_UNDEF            0x00000C00
+#define  PORTSCX_LINE_STATUS_BIT_POS          10
+
+/* bit 15-14 are port indicator control */
+#define  PORTSCX_PIC_OFF                      0x00000000
+#define  PORTSCX_PIC_AMBER                    0x00004000
+#define  PORTSCX_PIC_GREEN                    0x00008000
+#define  PORTSCX_PIC_UNDEF                    0x0000C000
+#define  PORTSCX_PIC_BIT_POS                  14
+
+/* bit 19-16 are port test control */
+#define  PORTSCX_PTC_DISABLE                  0x00000000
+#define  PORTSCX_PTC_JSTATE                   0x00010000
+#define  PORTSCX_PTC_KSTATE                   0x00020000
+#define  PORTSCX_PTC_SEQNAK                   0x00030000
+#define  PORTSCX_PTC_PACKET                   0x00040000
+#define  PORTSCX_PTC_FORCE_EN                 0x00050000
+#define  PORTSCX_PTC_BIT_POS                  16
+
+/* bit 27-26 are port speed */
+#define  PORTSCX_PORT_SPEED_FULL              0x00000000
+#define  PORTSCX_PORT_SPEED_LOW               0x04000000
+#define  PORTSCX_PORT_SPEED_HIGH              0x08000000
+#define  PORTSCX_PORT_SPEED_UNDEF             0x0C000000
+#define  PORTSCX_SPEED_BIT_POS                26
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define  PORTSCX_PTW                          0x10000000
+#define  PORTSCX_PTW_8BIT                     0x00000000
+#define  PORTSCX_PTW_16BIT                    0x10000000
+
+/* bit 31-30 are port transceiver select */
+#define  PORTSCX_PTS_UTMI                     0x00000000
+#define  PORTSCX_PTS_ULPI                     0x80000000
+#define  PORTSCX_PTS_FSLS                     0xC0000000
+#define  PORTSCX_PTS_BIT_POS                  30
+
+/* otgsc Register Bit Masks */
+#define  OTGSC_CTRL_VUSB_DISCHARGE            0x00000001
+#define  OTGSC_CTRL_VUSB_CHARGE               0x00000002
+#define  OTGSC_CTRL_OTG_TERM                  0x00000008
+#define  OTGSC_CTRL_DATA_PULSING              0x00000010
+#define  OTGSC_STS_USB_ID                     0x00000100
+#define  OTGSC_STS_A_VBUS_VALID               0x00000200
+#define  OTGSC_STS_A_SESSION_VALID            0x00000400
+#define  OTGSC_STS_B_SESSION_VALID            0x00000800
+#define  OTGSC_STS_B_SESSION_END              0x00001000
+#define  OTGSC_STS_1MS_TOGGLE                 0x00002000
+#define  OTGSC_STS_DATA_PULSING               0x00004000
+#define  OTGSC_INTSTS_USB_ID                  0x00010000
+#define  OTGSC_INTSTS_A_VBUS_VALID            0x00020000
+#define  OTGSC_INTSTS_A_SESSION_VALID         0x00040000
+#define  OTGSC_INTSTS_B_SESSION_VALID         0x00080000
+#define  OTGSC_INTSTS_B_SESSION_END           0x00100000
+#define  OTGSC_INTSTS_1MS                     0x00200000
+#define  OTGSC_INTSTS_DATA_PULSING            0x00400000
+#define  OTGSC_INTR_USB_ID                    0x01000000
+#define  OTGSC_INTR_A_VBUS_VALID              0x02000000
+#define  OTGSC_INTR_A_SESSION_VALID           0x04000000
+#define  OTGSC_INTR_B_SESSION_VALID           0x08000000
+#define  OTGSC_INTR_B_SESSION_END             0x10000000
+#define  OTGSC_INTR_1MS_TIMER                 0x20000000
+#define  OTGSC_INTR_DATA_PULSING              0x40000000
+
+/* USB MODE Register Bit Masks */
+#define  USB_MODE_CTRL_MODE_IDLE              0x00000000
+#define  USB_MODE_CTRL_MODE_DEVICE            0x00000002
+#define  USB_MODE_CTRL_MODE_HOST              0x00000003
+#define  USB_MODE_CTRL_MODE_MASK              0x00000003
+#define  USB_MODE_CTRL_MODE_RSV               0x00000001
+#define  USB_MODE_ES                          0x00000004 /* Endian Select */
+#define  USB_MODE_SETUP_LOCK_OFF              0x00000008
+#define  USB_MODE_STREAM_DISABLE              0x00000010
+/* Endpoint Flush Register */
+#define EPFLUSH_TX_OFFSET		      0x00010000
+#define EPFLUSH_RX_OFFSET		      0x00000000
+
+/* Endpoint Setup Status bit masks */
+#define  EP_SETUP_STATUS_MASK                 0x0000003F
+#define  EP_SETUP_STATUS_EP0		      0x00000001
+
+/* ENDPOINTCTRLx  Register Bit Masks */
+#define  EPCTRL_TX_ENABLE                     0x00800000
+#define  EPCTRL_TX_DATA_TOGGLE_RST            0x00400000	/* Not EP0 */
+#define  EPCTRL_TX_DATA_TOGGLE_INH            0x00200000	/* Not EP0 */
+#define  EPCTRL_TX_TYPE                       0x000C0000
+#define  EPCTRL_TX_DATA_SOURCE                0x00020000	/* Not EP0 */
+#define  EPCTRL_TX_EP_STALL                   0x00010000
+#define  EPCTRL_RX_ENABLE                     0x00000080
+#define  EPCTRL_RX_DATA_TOGGLE_RST            0x00000040	/* Not EP0 */
+#define  EPCTRL_RX_DATA_TOGGLE_INH            0x00000020	/* Not EP0 */
+#define  EPCTRL_RX_TYPE                       0x0000000C
+#define  EPCTRL_RX_DATA_SINK                  0x00000002	/* Not EP0 */
+#define  EPCTRL_RX_EP_STALL                   0x00000001
+
+/* bit 19-18 and 3-2 are endpoint type */
+#define  EPCTRL_EP_TYPE_CONTROL               0
+#define  EPCTRL_EP_TYPE_ISO                   1
+#define  EPCTRL_EP_TYPE_BULK                  2
+#define  EPCTRL_EP_TYPE_INTERRUPT             3
+#define  EPCTRL_TX_EP_TYPE_SHIFT              18
+#define  EPCTRL_RX_EP_TYPE_SHIFT              2
+
+/* SNOOPn Register Bit Masks */
+#define  SNOOP_ADDRESS_MASK                   0xFFFFF000
+#define  SNOOP_SIZE_ZERO                      0x00	/* snooping disable */
+#define  SNOOP_SIZE_4KB                       0x0B	/* 4KB snoop size */
+#define  SNOOP_SIZE_8KB                       0x0C
+#define  SNOOP_SIZE_16KB                      0x0D
+#define  SNOOP_SIZE_32KB                      0x0E
+#define  SNOOP_SIZE_64KB                      0x0F
+#define  SNOOP_SIZE_128KB                     0x10
+#define  SNOOP_SIZE_256KB                     0x11
+#define  SNOOP_SIZE_512KB                     0x12
+#define  SNOOP_SIZE_1MB                       0x13
+#define  SNOOP_SIZE_2MB                       0x14
+#define  SNOOP_SIZE_4MB                       0x15
+#define  SNOOP_SIZE_8MB                       0x16
+#define  SNOOP_SIZE_16MB                      0x17
+#define  SNOOP_SIZE_32MB                      0x18
+#define  SNOOP_SIZE_64MB                      0x19
+#define  SNOOP_SIZE_128MB                     0x1A
+#define  SNOOP_SIZE_256MB                     0x1B
+#define  SNOOP_SIZE_512MB                     0x1C
+#define  SNOOP_SIZE_1GB                       0x1D
+#define  SNOOP_SIZE_2GB                       0x1E	/* 2GB snoop size */
+
+/* pri_ctrl Register Bit Masks */
+#define  PRI_CTRL_PRI_LVL1                    0x0000000C
+#define  PRI_CTRL_PRI_LVL0                    0x00000003
+
+/* si_ctrl Register Bit Masks */
+#define  SI_CTRL_ERR_DISABLE                  0x00000010
+#define  SI_CTRL_IDRC_DISABLE                 0x00000008
+#define  SI_CTRL_RD_SAFE_EN                   0x00000004
+#define  SI_CTRL_RD_PREFETCH_DISABLE          0x00000002
+#define  SI_CTRL_RD_PREFEFETCH_VAL            0x00000001
+
+/* control Register Bit Masks */
+#define  USB_CTRL_IOENB                       0x00000004
+#define  USB_CTRL_ULPI_INT0EN                 0x00000001
+#define USB_CTRL_UTMI_PHY_EN		      0x00000200
+#define USB_CTRL_USB_EN			      0x00000004
+#define USB_CTRL_ULPI_PHY_CLK_SEL	      0x00000400
+
+/* Endpoint Queue Head data struct
+ * Rem: all the variables of qh are LittleEndian Mode
+ * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr
+ */
+struct ep_queue_head {
+	u32 max_pkt_length;	/* Mult(31-30) , Zlt(29) , Max Pkt len
+				   and IOS(15) */
+	u32 curr_dtd_ptr;	/* Current dTD Pointer(31-5) */
+	u32 next_dtd_ptr;	/* Next dTD Pointer(31-5), T(0) */
+	u32 size_ioc_int_sts;	/* Total bytes (30-16), IOC (15),
+				   MultO(11-10), STS (7-0)  */
+	u32 buff_ptr0;		/* Buffer pointer Page 0 (31-12) */
+	u32 buff_ptr1;		/* Buffer pointer Page 1 (31-12) */
+	u32 buff_ptr2;		/* Buffer pointer Page 2 (31-12) */
+	u32 buff_ptr3;		/* Buffer pointer Page 3 (31-12) */
+	u32 buff_ptr4;		/* Buffer pointer Page 4 (31-12) */
+	u32 res1;
+	u8 setup_buffer[8];	/* Setup data 8 bytes */
+	u32 res2[4];
+};
+
+/* Endpoint Queue Head Bit Masks */
+#define  EP_QUEUE_HEAD_MULT_POS               30
+#define  EP_QUEUE_HEAD_ZLT_SEL                0x20000000
+#define  EP_QUEUE_HEAD_MAX_PKT_LEN_POS        16
+#define  EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)   (((ep_info)>>16)&0x07ff)
+#define  EP_QUEUE_HEAD_IOS                    0x00008000
+#define  EP_QUEUE_HEAD_NEXT_TERMINATE         0x00000001
+#define  EP_QUEUE_HEAD_IOC                    0x00008000
+#define  EP_QUEUE_HEAD_MULTO                  0x00000C00
+#define  EP_QUEUE_HEAD_STATUS_HALT	      0x00000040
+#define  EP_QUEUE_HEAD_STATUS_ACTIVE          0x00000080
+#define  EP_QUEUE_CURRENT_OFFSET_MASK         0x00000FFF
+#define  EP_QUEUE_HEAD_NEXT_POINTER_MASK      0xFFFFFFE0
+#define  EP_QUEUE_FRINDEX_MASK                0x000007FF
+#define  EP_MAX_LENGTH_TRANSFER               0x4000
+
+/* Endpoint Transfer Descriptor data struct */
+/* Rem: all the variables of td are LittleEndian Mode */
+struct ep_td_struct {
+	u32 next_td_ptr;	/* Next TD pointer(31-5), T(0) set
+				   indicate invalid */
+	u32 size_ioc_sts;	/* Total bytes (30-16), IOC (15),
+				   MultO(11-10), STS (7-0)  */
+	u32 buff_ptr0;		/* Buffer pointer Page 0 */
+	u32 buff_ptr1;		/* Buffer pointer Page 1 */
+	u32 buff_ptr2;		/* Buffer pointer Page 2 */
+	u32 buff_ptr3;		/* Buffer pointer Page 3 */
+	u32 buff_ptr4;		/* Buffer pointer Page 4 */
+	u32 res;
+	/* 32 bytes */
+	dma_addr_t td_dma;	/* dma address for this td */
+	/* virtual address of next td specified in next_td_ptr */
+	struct ep_td_struct *next_td_virt;
+};
+
+/* Endpoint Transfer Descriptor bit Masks */
+#define  DTD_NEXT_TERMINATE                   0x00000001
+#define  DTD_IOC                              0x00008000
+#define  DTD_STATUS_ACTIVE                    0x00000080
+#define  DTD_STATUS_HALTED                    0x00000040
+#define  DTD_STATUS_DATA_BUFF_ERR             0x00000020
+#define  DTD_STATUS_TRANSACTION_ERR           0x00000008
+#define  DTD_RESERVED_FIELDS                  0x80007300
+#define  DTD_ADDR_MASK                        0xFFFFFFE0
+#define  DTD_PACKET_SIZE                      0x7FFF0000
+#define  DTD_LENGTH_BIT_POS                   16
+#define  DTD_ERROR_MASK                       (DTD_STATUS_HALTED | \
+                                               DTD_STATUS_DATA_BUFF_ERR | \
+                                               DTD_STATUS_TRANSACTION_ERR)
+/* Alignment requirements; must be a power of two */
+#define DTD_ALIGNMENT				0x20
+#define QH_ALIGNMENT				2048
+
+/* Controller dma boundary */
+#define UDC_DMA_BOUNDARY			0x1000
+
+/*-------------------------------------------------------------------------*/
+
+/* ### driver private data
+ */
+struct fsl_req {
+	struct usb_request req;
+	struct list_head queue;
+	/* ep_queue() func will add
+	   a request->queue into a udc_ep->queue 'd tail */
+	struct fsl_ep *ep;
+	unsigned mapped:1;
+
+	struct ep_td_struct *head, *tail;	/* For dTD List
+						   cpu endian Virtual addr */
+	unsigned int dtd_count;
+};
+
+#define REQ_UNCOMPLETE			1
+
+struct fsl_ep {
+	struct usb_ep ep;
+	struct list_head queue;
+	struct fsl_udc *udc;
+	struct ep_queue_head *qh;
+	struct usb_gadget *gadget;
+
+	char name[14];
+	unsigned stopped:1;
+};
+
+#define EP_DIR_IN	1
+#define EP_DIR_OUT	0
+
+struct fsl_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct fsl_usb2_platform_data *pdata;
+	struct completion *done;	/* to make sure release() is done */
+	struct fsl_ep *eps;
+	unsigned int max_ep;
+	unsigned int irq;
+
+	struct usb_ctrlrequest local_setup_buff;
+	spinlock_t lock;
+	struct usb_phy *transceiver;
+	unsigned softconnect:1;
+	unsigned vbus_active:1;
+	unsigned stopped:1;
+	unsigned remote_wakeup:1;
+	unsigned already_stopped:1;
+	unsigned big_endian_desc:1;
+
+	struct ep_queue_head *ep_qh;	/* Endpoints Queue-Head */
+	struct fsl_req *status_req;	/* ep0 status request */
+	struct dma_pool *td_pool;	/* dma pool for DTD */
+	enum fsl_usb2_phy_modes phy_mode;
+
+	size_t ep_qh_size;		/* size after alignment adjustment*/
+	dma_addr_t ep_qh_dma;		/* dma address of QH */
+
+	u32 max_pipes;          /* Device max pipes */
+	u32 bus_reset;		/* Device is bus resetting */
+	u32 resume_state;	/* USB state to resume */
+	u32 usb_state;		/* USB current state */
+	u32 ep0_state;		/* Endpoint zero state */
+	u32 ep0_dir;		/* Endpoint zero direction: can be
+				   USB_DIR_IN or USB_DIR_OUT */
+	u8 device_address;	/* Device USB address */
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
+				__func__, ## args)
+#else
+#define DBG(fmt, args...)	do{}while(0)
+#endif
+
+#if 0
+static void dump_msg(const char *label, const u8 * buf, unsigned int length)
+{
+	unsigned int start, num, i;
+	char line[52], *p;
+
+	if (length >= 512)
+		return;
+	DBG("%s, length %u:\n", label, length);
+	start = 0;
+	while (length > 0) {
+		num = min(length, 16u);
+		p = line;
+		for (i = 0; i < num; ++i) {
+			if (i == 8)
+				*p++ = ' ';
+			sprintf(p, " %02x", buf[i]);
+			p += 3;
+		}
+		*p = 0;
+		printk(KERN_DEBUG "%6x: %s\n", start, line);
+		buf += num;
+		start += num;
+		length -= num;
+	}
+}
+#endif
+
+#ifdef VERBOSE
+#define VDBG		DBG
+#else
+#define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		pr_err("udc: " stuff)
+#define WARNING(stuff...)	pr_warn("udc: " stuff)
+#define INFO(stuff...)		pr_info("udc: " stuff)
+
+/*-------------------------------------------------------------------------*/
+
+/* ### Add board specific defines here
+ */
+
+/*
+ * ### pipe direction macro from device view
+ */
+#define USB_RECV	0	/* OUT EP */
+#define USB_SEND	1	/* IN EP */
+
+/*
+ * ### internal used help routines.
+ */
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress&0xF)
+#define ep_maxpacket(EP)	((EP)->ep.maxpacket)
+#define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
+			& USB_DIR_IN)==USB_DIR_IN)
+#define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
+					&udc->eps[pipe])
+#define get_pipe_by_windex(windex)	((windex & USB_ENDPOINT_NUMBER_MASK) \
+					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
+#define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
+
+static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
+{
+	/* we only have one ep0 structure but two queue heads */
+	if (ep_index(ep) != 0)
+		return ep->qh;
+	else
+		return &ep->udc->ep_qh[(ep->udc->ep0_dir ==
+				USB_DIR_IN) ? 1 : 0];
+}
+
+#endif