Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 317 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
new file mode 100644
index 000000000..66b84f792
--- /dev/null
+++ b/drivers/usb/gadget/udc/mv_u3d.h
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
+#define MV_U3D_TRB_ALIGNMENT	16
+#define MV_U3D_DMA_BOUNDARY	4096
+#define MV_U3D_EP0_MAX_PKT_SIZE	512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP		0
+#define MV_U3D_DATA_STATE_XMIT		1
+#define MV_U3D_DATA_STATE_NEED_ZLP	2
+#define MV_U3D_WAIT_FOR_OUT_STATUS	3
+#define MV_U3D_DATA_STATE_RECV		4
+#define MV_U3D_STATUS_STAGE		5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP		0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
+#define MV_U3D_USBINT_UNDER_RUN	0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_USBINT_VBUS_VALID	0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_USBINT_LINK_CHG		0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
+#define MV_U3D_LINK_CHANGE_INACT		0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
+#define MV_U3D_LINK_CHANGE_U1			0x00000100
+#define MV_U3D_LINK_CHANGE_U2			0x00000200
+#define MV_U3D_LINK_CHANGE_U3			0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP		0x00000001
+#define MV_U3D_CMD_CTRL_RESET		0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
+#define MV_U3D_EPXCR_EP_TYPE_BULK		2
+#define MV_U3D_EPXCR_EP_TYPE_INT		3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
+#define MV_U3D_USB_BULK_BURST_OUT		6
+#define MV_U3D_USB_BULK_BURST_IN		14
+
+#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
+#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
+#define MV_U3D_EPXCR_EP_INIT		(1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
+#define MV_U3D_COMPLETE_INVALID	0
+#define MV_U3D_COMPLETE_SUCCESS	1
+#define MV_U3D_COMPLETE_BUFF_ERR	2
+#define MV_U3D_COMPLETE_SHORT_PACKET	3
+#define MV_U3D_COMPLETE_TRB_ERR	5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
+#define MV_U3D_USB3_PHY_OFFSET		0xB800
+
+#define DCS_ENABLE	0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT		10000
+#define MV_U3D_FLUSH_TIMEOUT		100000
+#define MV_U3D_OWN_TIMEOUT		10000
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN		1
+#define MV_U3D_EP_DIR_OUT		0
+#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+	u32	rsvd[5];
+	u32	dboff;	/* doorbell register offset */
+	u32	rtsoff;	/* runtime register offset */
+	u32	vuoff;	/* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	rsvd1[11];
+	u32	dcbaapl;	/* Device Context Base Address low register */
+	u32	dcbaaph;	/* Device Context Base Address high register */
+	u32	rsvd2[243];
+	u32	portsc;		/* port status and control register*/
+	u32	portlinkinfo;	/* port link info register*/
+	u32	rsvd3[9917];
+	u32	doorbell;	/* doorbell register */
+};
+
+/* control endpoint enable registers */
+struct epxcr {
+	u32	epxoutcr0;	/* ep out control 0 register */
+	u32	epxoutcr1;	/* ep out control 1 register */
+	u32	epxincr0;	/* ep in control 0 register */
+	u32	epxincr1;	/* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+	u32	curdeqlo;	/* current TRB pointer low */
+	u32	curdeqhi;	/* current TRB pointer high */
+	u32	statuslo;	/* transfer status low */
+	u32	statushi;	/* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+	u32	ctrlepenable;	/* control endpoint enable register */
+	u32	setuplock;	/* setup lock register */
+	u32	endcomplete;	/* endpoint transfer complete register */
+	u32	intrcause;	/* interrupt cause register */
+	u32	intrenable;	/* interrupt enable register */
+	u32	trbcomplete;	/* TRB complete register */
+	u32	linkchange;	/* link change register */
+	u32	rsvd1[5];
+	u32	trbunderrun;	/* TRB underrun register */
+	u32	rsvd2[43];
+	u32	bridgesetting;	/* bridge setting register */
+	u32	rsvd3[7];
+	struct xferstatus	txst[16];	/* TX status register */
+	struct xferstatus	rxst[16];	/* RX status register */
+	u32	ltssm;		/* LTSSM control register */
+	u32	pipe;		/* PIPE control register */
+	u32	linkcr0;	/* link control 0 register */
+	u32	linkcr1;	/* link control 1 register */
+	u32	rsvd6[60];
+	u32	mib0;		/* MIB0 counter register */
+	u32	usblink;	/* usb link control register */
+	u32	ltssmstate;	/* LTSSM state register */
+	u32	linkerrorcause;	/* link error cause register */
+	u32	rsvd7[60];
+	u32	devaddrtiebrkr;	/* device address and tie breaker */
+	u32	itpinfo0;	/* ITP info 0 register */
+	u32	itpinfo1;	/* ITP info 1 register */
+	u32	rsvd8[61];
+	struct epxcr	epcr[16];	/* ep control register */
+	u32	rsvd9[64];
+	u32	phyaddr;	/* PHY address register */
+	u32	phydata;	/* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+	u32	rsvd0;
+	u32	rsvd1;
+	u32	trb_addr_lo;		/* TRB address low 32 bit */
+	u32	trb_addr_hi;		/* TRB address high 32 bit */
+	u32	rsvd2;
+	u32	rsvd3;
+	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+	u32	own:1;		/* owner of TRB */
+	u32	rsvd1:3;
+	u32	chain:1;	/* associate this TRB with the
+				next TRB on the Ring */
+	u32	ioc:1;		/* interrupt on complete */
+	u32	rsvd2:4;
+	u32	type:6;		/* TRB type */
+#define TYPE_NORMAL	1
+#define TYPE_DATA	3
+#define TYPE_LINK	6
+	u32	dir:1;		/* Working at data stage of control endpoint
+				operation. 0 is OUT and 1 is IN. */
+	u32	rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+	u32	buf_addr_lo;	/* data buffer address low 32 bit */
+	u32	buf_addr_hi;	/* data buffer address high 32 bit */
+	u32	trb_len;	/* transfer length */
+	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
+	dma_addr_t trb_dma;		/* dma address for this trb_hw */
+	struct list_head trb_list;	/* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;	/* device lock */
+	struct completion		*done;
+	struct device			*dev;
+	int				irq;
+
+	/* usb controller registers */
+	struct mv_u3d_cap_regs __iomem	*cap_regs;
+	struct mv_u3d_op_regs __iomem	*op_regs;
+	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
+	void __iomem			*phy_regs;
+
+	unsigned int			max_eps;
+	struct mv_u3d_ep_context	*ep_context;
+	size_t				ep_context_size;
+	dma_addr_t			ep_context_dma;
+
+	struct dma_pool			*trb_pool; /* for TRB data structure */
+	struct mv_u3d_ep		*eps;
+
+	struct mv_u3d_req		*status_req; /* ep0 status request */
+	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;	/* device address */
+
+	unsigned int		errors;
+
+	unsigned		softconnect:1;
+	unsigned		vbus_active:1;	/* vbus is active or not */
+	unsigned		remote_wakeup:1; /* support remote wakeup */
+	unsigned		clock_gating:1;	/* clock gating or not */
+	unsigned		active:1;	/* udc is active or not */
+	unsigned		vbus_valid_detect:1; /* udc vbus detection */
+
+	struct mv_usb_addon_irq *vbus;
+	unsigned int		power;
+
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+	struct usb_ep		ep;
+	struct mv_u3d		*u3d;
+	struct list_head	queue;	/* ep request queued hardware */
+	struct list_head	req_list; /* list of ep request */
+	struct mv_u3d_ep_context	*ep_context; /* ep context */
+	u32			direction;
+	char			name[14];
+	u32			processing; /* there is ep request
+						queued on haredware */
+	spinlock_t		req_lock; /* ep lock */
+	unsigned		wedge:1;
+	unsigned		enabled:1;
+	unsigned		ep_type:2;
+	unsigned		ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+	struct usb_request	req;
+	struct mv_u3d_ep	*ep;
+	struct list_head	queue;	/* ep requst queued on hardware */
+	struct list_head	list;	/* ep request list */
+	struct list_head	trb_list; /* trb list of a request */
+
+	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
+	unsigned		trb_count; /* TRB number in the chain */
+	unsigned		chain;	   /* TRB chain or not */
+};
+
+#endif