Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 595 insertions, 0 deletions

diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
new file mode 100644
index 000000000..84904025f
--- /dev/null
+++ b/drivers/usb/host/isp116x.h
@@ -0,0 +1,595 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ */
+
+/* us of 1ms frame */
+#define  MAX_LOAD_LIMIT		850
+
+/* Full speed: max # of bytes to transfer for a single urb
+   at a time must be < 1024 && must be multiple of 64.
+   832 allows transferring 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED	832
+
+/* Low speed: there is no reason to schedule in very big
+   chunks; often the requested long transfers are for
+   string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED	64
+
+/* Bytetime (us), a rough indication of how much time it
+   would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED	1
+#define BYTE_TIME_LOWSPEED	20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE	4096
+#define ISP116x_ITL_BUFSIZE	0
+#define ISP116x_ATL_BUFSIZE	((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET	0x80
+
+/*------------ ISP116x registers/bits ------------*/
+#define	HCREVISION	0x00
+#define	HCCONTROL	0x01
+#define		HCCONTROL_HCFS	(3 << 6)	/* host controller
+						   functional state */
+#define		HCCONTROL_USB_RESET	(0 << 6)
+#define		HCCONTROL_USB_RESUME	(1 << 6)
+#define		HCCONTROL_USB_OPER	(2 << 6)
+#define		HCCONTROL_USB_SUSPEND	(3 << 6)
+#define		HCCONTROL_RWC	(1 << 9)	/* remote wakeup connected */
+#define		HCCONTROL_RWE	(1 << 10)	/* remote wakeup enable */
+#define	HCCMDSTAT	0x02
+#define		HCCMDSTAT_HCR	(1 << 0)	/* host controller reset */
+#define		HCCMDSTAT_SOC	(3 << 16)	/* scheduling overrun count */
+#define	HCINTSTAT	0x03
+#define		HCINT_SO	(1 << 0)	/* scheduling overrun */
+#define		HCINT_WDH	(1 << 1)	/* writeback of done_head */
+#define		HCINT_SF	(1 << 2)	/* start frame */
+#define		HCINT_RD	(1 << 3)	/* resume detect */
+#define		HCINT_UE	(1 << 4)	/* unrecoverable error */
+#define		HCINT_FNO	(1 << 5)	/* frame number overflow */
+#define		HCINT_RHSC	(1 << 6)	/* root hub status change */
+#define		HCINT_OC	(1 << 30)	/* ownership change */
+#define		HCINT_MIE	(1 << 31)	/* master interrupt enable */
+#define	HCINTENB	0x04
+#define	HCINTDIS	0x05
+#define	HCFMINTVL	0x0d
+#define	HCFMREM		0x0e
+#define	HCFMNUM		0x0f
+#define	HCLSTHRESH	0x11
+#define	HCRHDESCA	0x12
+#define		RH_A_NDP	(0x3 << 0)	/* # downstream ports */
+#define		RH_A_PSM	(1 << 8)	/* power switching mode */
+#define		RH_A_NPS	(1 << 9)	/* no power switching */
+#define		RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define		RH_A_OCPM	(1 << 11)	/* overcurrent protection
+						   mode */
+#define		RH_A_NOCP	(1 << 12)	/* no overcurrent protection */
+#define		RH_A_POTPGT	(0xff << 24)	/* power on -> power good
+						   time */
+#define	HCRHDESCB	0x13
+#define		RH_B_DR		(0xffff << 0)	/* device removable flags */
+#define		RH_B_PPCM	(0xffff << 16)	/* port power control mask */
+#define	HCRHSTATUS	0x14
+#define		RH_HS_LPS	(1 << 0)	/* local power status */
+#define		RH_HS_OCI	(1 << 1)	/* over current indicator */
+#define		RH_HS_DRWE	(1 << 15)	/* device remote wakeup
+						   enable */
+#define		RH_HS_LPSC	(1 << 16)	/* local power status change */
+#define		RH_HS_OCIC	(1 << 17)	/* over current indicator
+						   change */
+#define		RH_HS_CRWE	(1 << 31)	/* clear remote wakeup
+						   enable */
+#define	HCRHPORT1	0x15
+#define		RH_PS_CCS	(1 << 0)	/* current connect status */
+#define		RH_PS_PES	(1 << 1)	/* port enable status */
+#define		RH_PS_PSS	(1 << 2)	/* port suspend status */
+#define		RH_PS_POCI	(1 << 3)	/* port over current
+						   indicator */
+#define		RH_PS_PRS	(1 << 4)	/* port reset status */
+#define		RH_PS_PPS	(1 << 8)	/* port power status */
+#define		RH_PS_LSDA	(1 << 9)	/* low speed device attached */
+#define		RH_PS_CSC	(1 << 16)	/* connect status change */
+#define		RH_PS_PESC	(1 << 17)	/* port enable status change */
+#define		RH_PS_PSSC	(1 << 18)	/* port suspend status
+						   change */
+#define		RH_PS_OCIC	(1 << 19)	/* over current indicator
+						   change */
+#define		RH_PS_PRSC	(1 << 20)	/* port reset status change */
+#define		HCRHPORT_CLRMASK	(0x1f << 16)
+#define	HCRHPORT2	0x16
+#define	HCHWCFG		0x20
+#define		HCHWCFG_15KRSEL		(1 << 12)
+#define		HCHWCFG_CLKNOTSTOP	(1 << 11)
+#define		HCHWCFG_ANALOG_OC	(1 << 10)
+#define		HCHWCFG_DACK_MODE	(1 << 8)
+#define		HCHWCFG_EOT_POL		(1 << 7)
+#define		HCHWCFG_DACK_POL	(1 << 6)
+#define		HCHWCFG_DREQ_POL	(1 << 5)
+#define		HCHWCFG_DBWIDTH_MASK	(0x03 << 3)
+#define		HCHWCFG_DBWIDTH(n)	(((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define		HCHWCFG_INT_POL		(1 << 2)
+#define		HCHWCFG_INT_TRIGGER	(1 << 1)
+#define		HCHWCFG_INT_ENABLE	(1 << 0)
+#define	HCDMACFG	0x21
+#define		HCDMACFG_BURST_LEN_MASK	(0x03 << 5)
+#define		HCDMACFG_BURST_LEN(n)	(((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define		HCDMACFG_BURST_LEN_1	HCDMACFG_BURST_LEN(0)
+#define		HCDMACFG_BURST_LEN_4	HCDMACFG_BURST_LEN(1)
+#define		HCDMACFG_BURST_LEN_8	HCDMACFG_BURST_LEN(2)
+#define		HCDMACFG_DMA_ENABLE	(1 << 4)
+#define		HCDMACFG_BUF_TYPE_MASK	(0x07 << 1)
+#define		HCDMACFG_CTR_SEL	(1 << 2)
+#define		HCDMACFG_ITLATL_SEL	(1 << 1)
+#define		HCDMACFG_DMA_RW_SELECT	(1 << 0)
+#define	HCXFERCTR	0x22
+#define	HCuPINT		0x24
+#define		HCuPINT_SOF		(1 << 0)
+#define		HCuPINT_ATL		(1 << 1)
+#define		HCuPINT_AIIEOT		(1 << 2)
+#define		HCuPINT_OPR		(1 << 4)
+#define		HCuPINT_SUSP		(1 << 5)
+#define		HCuPINT_CLKRDY		(1 << 6)
+#define	HCuPINTENB	0x25
+#define	HCCHIPID	0x27
+#define		HCCHIPID_MASK		0xff00
+#define		HCCHIPID_MAGIC		0x6100
+#define	HCSCRATCH	0x28
+#define	HCSWRES		0x29
+#define		HCSWRES_MAGIC		0x00f6
+#define	HCITLBUFLEN	0x2a
+#define	HCATLBUFLEN	0x2b
+#define	HCBUFSTAT	0x2c
+#define		HCBUFSTAT_ITL0_FULL	(1 << 0)
+#define		HCBUFSTAT_ITL1_FULL	(1 << 1)
+#define		HCBUFSTAT_ATL_FULL	(1 << 2)
+#define		HCBUFSTAT_ITL0_DONE	(1 << 3)
+#define		HCBUFSTAT_ITL1_DONE	(1 << 4)
+#define		HCBUFSTAT_ATL_DONE	(1 << 5)
+#define	HCRDITL0LEN	0x2d
+#define	HCRDITL1LEN	0x2e
+#define	HCITLPORT	0x40
+#define	HCATLPORT	0x41
+
+/* Philips transfer descriptor */
+struct ptd {
+	u16 count;
+#define	PTD_COUNT_MSK	(0x3ff << 0)
+#define	PTD_TOGGLE_MSK	(1 << 10)
+#define	PTD_ACTIVE_MSK	(1 << 11)
+#define	PTD_CC_MSK	(0xf << 12)
+	u16 mps;
+#define	PTD_MPS_MSK	(0x3ff << 0)
+#define	PTD_SPD_MSK	(1 << 10)
+#define	PTD_LAST_MSK	(1 << 11)
+#define	PTD_EP_MSK	(0xf << 12)
+	u16 len;
+#define	PTD_LEN_MSK	(0x3ff << 0)
+#define	PTD_DIR_MSK	(3 << 10)
+#define	PTD_DIR_SETUP	(0)
+#define	PTD_DIR_OUT	(1)
+#define	PTD_DIR_IN	(2)
+#define	PTD_B5_5_MSK	(1 << 13)
+	u16 faddr;
+#define	PTD_FA_MSK	(0x7f << 0)
+#define	PTD_FMT_MSK	(1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p)	(((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v)		(((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p)	(((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v)		(((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p)	(((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v)		(((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p)		(((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v)		(((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p)		(((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v)		(((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p)		(((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v)		(((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p)		(((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v)		(((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p)		(((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v)		(((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p)		(((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v)		(((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p)		(((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v)		(((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p)		(((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v)		(((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p)		(((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v)		(((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p)		(((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v)		(((v) << 7) & PTD_FMT_MSK)
+
+/*  Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR      0x00
+#define TD_CC_CRC          0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL        0x04
+#define TD_DEVNOTRESP      0x05
+#define TD_PIDCHECKFAIL    0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN     0x08
+#define TD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED     0x0F
+
+/* map PTD status codes (CC) to errno values */
+static const int cc_to_error[16] = {
+	/* No  Error  */ 0,
+	/* CRC Error  */ -EILSEQ,
+	/* Bit Stuff  */ -EPROTO,
+	/* Data Togg  */ -EILSEQ,
+	/* Stall      */ -EPIPE,
+	/* DevNotResp */ -ETIME,
+	/* PIDCheck   */ -EPROTO,
+	/* UnExpPID   */ -EPROTO,
+	/* DataOver   */ -EOVERFLOW,
+	/* DataUnder  */ -EREMOTEIO,
+	/* (for hw)   */ -EIO,
+	/* (for hw)   */ -EIO,
+	/* BufferOver */ -ECOMM,
+	/* BuffUnder  */ -ENOSR,
+	/* (for HCD)  */ -EALREADY,
+	/* (for HCD)  */ -EALREADY
+};
+
+/*--------------------------------------------------------------*/
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct isp116x {
+	spinlock_t lock;
+
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+
+	struct isp116x_platform_data *board;
+
+	unsigned long stat1, stat2, stat4, stat8, stat16;
+
+	/* HC registers */
+	u32 intenb;		/* "OHCI" interrupts */
+	u16 irqenb;		/* uP interrupts */
+
+	/* Root hub registers */
+	u32 rhdesca;
+	u32 rhdescb;
+	u32 rhstatus;
+
+	/* async schedule: control, bulk */
+	struct list_head async;
+
+	/* periodic schedule: int */
+	u16 load[PERIODIC_SIZE];
+	struct isp116x_ep *periodic[PERIODIC_SIZE];
+	unsigned periodic_count;
+	u16 fmindex;
+
+	/* Schedule for the current frame */
+	struct isp116x_ep *atl_active;
+	int atl_buflen;
+	int atl_bufshrt;
+	int atl_last_dir;
+	atomic_t atl_finishing;
+};
+
+static inline struct isp116x *hcd_to_isp116x(struct usb_hcd *hcd)
+{
+	return (struct isp116x *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *isp116x_to_hcd(struct isp116x *isp116x)
+{
+	return container_of((void *)isp116x, struct usb_hcd, hcd_priv);
+}
+
+struct isp116x_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device *udev;
+	struct ptd ptd;
+
+	u8 maxpacket;
+	u8 epnum;
+	u8 nextpid;
+	u16 error_count;
+	u16 length;		/* of current packet */
+	unsigned char *data;	/* to databuf */
+	/* queue of active EP's (the ones scheduled for the
+	   current frame) */
+	struct isp116x_ep *active;
+
+	/* periodic schedule */
+	u16 period;
+	u16 branch;
+	u16 load;
+	struct isp116x_ep *next;
+
+	/* async schedule */
+	struct list_head schedule;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define DBG(stuff...)		pr_debug("116x: " stuff)
+
+#ifdef VERBOSE
+#    define VDBG		DBG
+#else
+#    define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		printk(KERN_ERR "116x: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "116x: " stuff)
+#define INFO(stuff...)		printk(KERN_INFO "116x: " stuff)
+
+/* ------------------------------------------------- */
+
+#if defined(USE_PLATFORM_DELAY)
+#if defined(USE_NDELAY)
+#error USE_PLATFORM_DELAY and USE_NDELAY simultaneously defined.
+#endif
+#define	isp116x_delay(h,d)	(h)->board->delay(	\
+				isp116x_to_hcd(h)->self.controller,d)
+#define isp116x_check_platform_delay(h)	((h)->board->delay == NULL)
+#elif defined(USE_NDELAY)
+#define	isp116x_delay(h,d)	ndelay(d)
+#define isp116x_check_platform_delay(h)	0
+#else
+#define	isp116x_delay(h,d)	do{}while(0)
+#define isp116x_check_platform_delay(h)	0
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+	writew(reg & 0xff, isp116x->addr_reg);
+	isp116x_delay(isp116x, 300);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+	writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+	__raw_writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = __raw_readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+	writew(val & 0xffff, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	writew(val >> 16, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+	u32 val;
+
+	val = (u32) readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	val |= ((u32) readw(isp116x->data_reg)) << 16;
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+   we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data32(isp116x, (u32) val);
+}
+
+#define isp116x_show_reg_log(d,r,s) {				\
+	if ((r) < 0x20) {			                \
+		DBG("%-12s[%02x]: %08x\n", #r,			\
+			r, isp116x_read_reg32(d, r));		\
+	} else {						\
+		DBG("%-12s[%02x]:     %04x\n", #r,		\
+			r, isp116x_read_reg16(d, r));	    	\
+	}							\
+}
+#define isp116x_show_reg_seq(d,r,s) {				\
+	if ((r) < 0x20) {					\
+		seq_printf(s, "%-12s[%02x]: %08x\n", #r,	\
+			r, isp116x_read_reg32(d, r));		\
+	} else {						\
+		seq_printf(s, "%-12s[%02x]:     %04x\n", #r,	\
+			r, isp116x_read_reg16(d, r));		\
+	}							\
+}
+
+#define isp116x_show_regs(d,type,s) {			\
+	isp116x_show_reg_##type(d, HCREVISION, s);	\
+	isp116x_show_reg_##type(d, HCCONTROL, s);	\
+	isp116x_show_reg_##type(d, HCCMDSTAT, s);	\
+	isp116x_show_reg_##type(d, HCINTSTAT, s);	\
+	isp116x_show_reg_##type(d, HCINTENB, s);	\
+	isp116x_show_reg_##type(d, HCFMINTVL, s);	\
+	isp116x_show_reg_##type(d, HCFMREM, s);		\
+	isp116x_show_reg_##type(d, HCFMNUM, s);		\
+	isp116x_show_reg_##type(d, HCLSTHRESH, s);	\
+	isp116x_show_reg_##type(d, HCRHDESCA, s);	\
+	isp116x_show_reg_##type(d, HCRHDESCB, s);	\
+	isp116x_show_reg_##type(d, HCRHSTATUS, s);	\
+	isp116x_show_reg_##type(d, HCRHPORT1, s);	\
+	isp116x_show_reg_##type(d, HCRHPORT2, s);	\
+	isp116x_show_reg_##type(d, HCHWCFG, s);		\
+	isp116x_show_reg_##type(d, HCDMACFG, s);	\
+	isp116x_show_reg_##type(d, HCXFERCTR, s);	\
+	isp116x_show_reg_##type(d, HCuPINT, s);		\
+	isp116x_show_reg_##type(d, HCuPINTENB, s);	\
+	isp116x_show_reg_##type(d, HCCHIPID, s);	\
+	isp116x_show_reg_##type(d, HCSCRATCH, s);	\
+	isp116x_show_reg_##type(d, HCITLBUFLEN, s);	\
+	isp116x_show_reg_##type(d, HCATLBUFLEN, s);	\
+	isp116x_show_reg_##type(d, HCBUFSTAT, s);	\
+	isp116x_show_reg_##type(d, HCRDITL0LEN, s);	\
+	isp116x_show_reg_##type(d, HCRDITL1LEN, s);	\
+}
+
+/*
+   Dump registers for debugfs.
+*/
+static inline void isp116x_show_regs_seq(struct isp116x *isp116x,
+					  struct seq_file *s)
+{
+	isp116x_show_regs(isp116x, seq, s);
+}
+
+/*
+   Dump registers to syslog.
+*/
+static inline void isp116x_show_regs_log(struct isp116x *isp116x)
+{
+	isp116x_show_regs(isp116x, log, NULL);
+}
+
+#if defined(URB_TRACE)
+
+#define PIPETYPE(pipe)  ({ char *__s;			\
+	if (usb_pipecontrol(pipe))	__s = "ctrl";	\
+	else if (usb_pipeint(pipe))	__s = "int";	\
+	else if (usb_pipebulk(pipe))	__s = "bulk";	\
+	else				__s = "iso";	\
+	__s;})
+#define PIPEDIR(pipe)   ({ usb_pipein(pipe) ? "in" : "out"; })
+#define URB_NOTSHORT(urb) ({ (urb)->transfer_flags & URB_SHORT_NOT_OK ? \
+	"short_not_ok" : ""; })
+
+/* print debug info about the URB */
+static void urb_dbg(struct urb *urb, char *msg)
+{
+	unsigned int pipe;
+
+	if (!urb) {
+		DBG("%s: zero urb\n", msg);
+		return;
+	}
+	pipe = urb->pipe;
+	DBG("%s: FA %d ep%d%s %s: len %d/%d %s\n", msg,
+	    usb_pipedevice(pipe), usb_pipeendpoint(pipe),
+	    PIPEDIR(pipe), PIPETYPE(pipe),
+	    urb->transfer_buffer_length, urb->actual_length, URB_NOTSHORT(urb));
+}
+
+#else
+
+#define  urb_dbg(urb,msg)   do{}while(0)
+
+#endif				/* ! defined(URB_TRACE) */
+
+#if defined(PTD_TRACE)
+
+#define PTD_DIR_STR(ptd)  ({char __c;		\
+	switch(PTD_GET_DIR(ptd)){		\
+	case 0:  __c = 's'; break;		\
+	case 1:  __c = 'o'; break;		\
+	default: __c = 'i'; break;		\
+	}; __c;})
+
+/*
+  Dump PTD info. The code documents the format
+  perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+	printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
+	       PTD_GET_CC(ptd), PTD_GET_FA(ptd),
+	       PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+	       PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+	       PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd),
+	       PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+}
+
+static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
+		printk(KERN_WARNING "-> ");
+		for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+}
+
+static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
+		printk(KERN_WARNING "<- ");
+		for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+	if (PTD_GET_LAST(ptd))
+		printk(KERN_WARNING "-\n");
+}
+
+#else
+
+#define dump_ptd(ptd)               do{}while(0)
+#define dump_ptd_in_data(ptd,buf)   do{}while(0)
+#define dump_ptd_out_data(ptd,buf)  do{}while(0)
+
+#endif				/* ! defined(PTD_TRACE) */