Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 278 insertions, 0 deletions

diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
new file mode 100644
index 000000000..e5b122865
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
+ *
+ * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1) Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2) Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3) The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_H_
+#define _SISUSB_H_
+
+#include <linux/mutex.h>
+
+/* Version Information */
+
+#define SISUSB_VERSION		0
+#define SISUSB_REVISION		0
+#define SISUSB_PATCHLEVEL	8
+
+/* Include console and mode switching code? */
+
+#include <linux/vt_kern.h>
+#include "sisusb_struct.h"
+
+/* USB related */
+
+#define SISUSB_MINOR		133	/* official */
+
+/* Size of the sisusb input/output buffers */
+#define SISUSB_IBUF_SIZE  0x01000
+#define SISUSB_OBUF_SIZE  0x10000	/* fixed */
+
+#define NUMOBUFS 8		/* max number of output buffers/output URBs */
+
+/* About endianness:
+ *
+ * 1) I/O ports, PCI config registers. The read/write()
+ *    calls emulate inX/outX. Hence, the data is
+ *    expected/delivered in machine endiannes by this
+ *    driver.
+ * 2) Video memory. The data is copied 1:1. There is
+ *    no swapping. Ever. This means for userland that
+ *    the data has to be prepared properly. (Hint:
+ *    think graphics data format, command queue,
+ *    hardware cursor.)
+ * 3) MMIO. Data is copied 1:1. MMIO must be swapped
+ *    properly by userland.
+ *
+ */
+
+#ifdef __BIG_ENDIAN
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)		\
+	do {						\
+		p->header  = cpu_to_le16(p->header);	\
+		p->address = cpu_to_le32(p->address);	\
+		p->data    = cpu_to_le32(p->data);	\
+	} while(0)
+#else
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)
+#endif
+
+struct sisusb_usb_data;
+
+struct sisusb_urb_context {	/* urb->context for outbound bulk URBs */
+	struct sisusb_usb_data *sisusb;
+	int urbindex;
+	int *actual_length;
+};
+
+struct sisusb_usb_data {
+	struct usb_device *sisusb_dev;
+	struct usb_interface *interface;
+	struct kref kref;
+	wait_queue_head_t wait_q;	/* for syncind and timeouts */
+	struct mutex lock;	/* general race avoidance */
+	unsigned int ifnum;	/* interface number of the USB device */
+	int minor;		/* minor (for logging clarity) */
+	int isopen;		/* !=0 if open */
+	int present;		/* !=0 if device is present on the bus */
+	int ready;		/* !=0 if device is ready for userland */
+	int numobufs;		/* number of obufs = number of out urbs */
+	char *obuf[NUMOBUFS], *ibuf;	/* transfer buffers */
+	int obufsize, ibufsize;
+	struct urb *sisurbout[NUMOBUFS];
+	struct urb *sisurbin;
+	unsigned char urbstatus[NUMOBUFS];
+	unsigned char completein;
+	struct sisusb_urb_context urbout_context[NUMOBUFS];
+	unsigned long flagb0;
+	unsigned long vrambase;	/* framebuffer base */
+	unsigned int vramsize;	/* framebuffer size (bytes) */
+	unsigned long mmiobase;
+	unsigned int mmiosize;
+	unsigned long ioportbase;
+	unsigned char devinit;	/* device initialized? */
+	unsigned char gfxinit;	/* graphics core initialized? */
+	unsigned short chipid, chipvendor;
+	unsigned short chiprevision;
+};
+
+#define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref)
+
+/* USB transport related */
+
+/* urbstatus */
+#define SU_URB_BUSY   1
+#define SU_URB_ALLOC  2
+
+/* Endpoints */
+
+#define SISUSB_EP_GFX_IN	0x0e	/* gfx std packet out(0e)/in(8e) */
+#define SISUSB_EP_GFX_OUT	0x0e
+
+#define SISUSB_EP_GFX_BULK_OUT	0x01	/* gfx mem bulk out/in */
+#define SISUSB_EP_GFX_BULK_IN	0x02	/* ? 2 is "OUT" ? */
+
+#define SISUSB_EP_GFX_LBULK_OUT	0x03	/* gfx large mem bulk out */
+
+#define SISUSB_EP_UNKNOWN_04	0x04	/* ? 4 is "OUT" ? - unused */
+
+#define SISUSB_EP_BRIDGE_IN	0x0d	/* Net2280 out(0d)/in(8d) */
+#define SISUSB_EP_BRIDGE_OUT	0x0d
+
+#define SISUSB_TYPE_MEM		0
+#define SISUSB_TYPE_IO		1
+
+struct sisusb_packet {
+	unsigned short header;
+	u32 address;
+	u32 data;
+} __attribute__ ((__packed__));
+
+#define CLEARPACKET(packet) memset(packet, 0, 10)
+
+/* PCI bridge related */
+
+#define SISUSB_PCI_MEMBASE	0xd0000000
+#define SISUSB_PCI_MMIOBASE	0xe4000000
+#define SISUSB_PCI_IOPORTBASE	0x0000d000
+
+#define SISUSB_PCI_PSEUDO_MEMBASE	0x10000000
+#define SISUSB_PCI_PSEUDO_MMIOBASE	0x20000000
+#define SISUSB_PCI_PSEUDO_IOPORTBASE	0x0000d000
+#define SISUSB_PCI_PSEUDO_PCIBASE	0x00010000
+
+#define SISUSB_PCI_MMIOSIZE	(128*1024)
+#define SISUSB_PCI_PCONFSIZE	0x5c
+
+/* graphics core related */
+
+#define AROFFSET	0x40
+#define ARROFFSET	0x41
+#define GROFFSET	0x4e
+#define SROFFSET	0x44
+#define CROFFSET	0x54
+#define MISCROFFSET	0x4c
+#define MISCWOFFSET	0x42
+#define INPUTSTATOFFSET 0x5A
+#define PART1OFFSET	0x04
+#define PART2OFFSET	0x10
+#define PART3OFFSET	0x12
+#define PART4OFFSET	0x14
+#define PART5OFFSET	0x16
+#define CAPTUREOFFSET	0x00
+#define VIDEOOFFSET	0x02
+#define COLREGOFFSET	0x48
+#define PELMASKOFFSET	0x46
+#define VGAENABLE	0x43
+
+#define SISAR		SISUSB_PCI_IOPORTBASE + AROFFSET
+#define SISARR		SISUSB_PCI_IOPORTBASE + ARROFFSET
+#define SISGR		SISUSB_PCI_IOPORTBASE + GROFFSET
+#define SISSR		SISUSB_PCI_IOPORTBASE + SROFFSET
+#define SISCR		SISUSB_PCI_IOPORTBASE + CROFFSET
+#define SISMISCR	SISUSB_PCI_IOPORTBASE + MISCROFFSET
+#define SISMISCW	SISUSB_PCI_IOPORTBASE + MISCWOFFSET
+#define SISINPSTAT	SISUSB_PCI_IOPORTBASE + INPUTSTATOFFSET
+#define SISPART1	SISUSB_PCI_IOPORTBASE + PART1OFFSET
+#define SISPART2	SISUSB_PCI_IOPORTBASE + PART2OFFSET
+#define SISPART3	SISUSB_PCI_IOPORTBASE + PART3OFFSET
+#define SISPART4	SISUSB_PCI_IOPORTBASE + PART4OFFSET
+#define SISPART5	SISUSB_PCI_IOPORTBASE + PART5OFFSET
+#define SISCAP		SISUSB_PCI_IOPORTBASE + CAPTUREOFFSET
+#define SISVID		SISUSB_PCI_IOPORTBASE + VIDEOOFFSET
+#define SISCOLIDXR	SISUSB_PCI_IOPORTBASE + COLREGOFFSET - 1
+#define SISCOLIDX	SISUSB_PCI_IOPORTBASE + COLREGOFFSET
+#define SISCOLDATA	SISUSB_PCI_IOPORTBASE + COLREGOFFSET + 1
+#define SISCOL2IDX	SISPART5
+#define SISCOL2DATA	SISPART5 + 1
+#define SISPEL		SISUSB_PCI_IOPORTBASE + PELMASKOFFSET
+#define SISVGAEN	SISUSB_PCI_IOPORTBASE + VGAENABLE
+#define SISDACA		SISCOLIDX
+#define SISDACD		SISCOLDATA
+
+/* ioctl related */
+
+/* Structure argument for SISUSB_GET_INFO ioctl  */
+struct sisusb_info {
+	__u32 sisusb_id;	/* for identifying sisusb */
+#define SISUSB_ID  0x53495355	/* Identify myself with 'SISU' */
+	__u8 sisusb_version;
+	__u8 sisusb_revision;
+	__u8 sisusb_patchlevel;
+	__u8 sisusb_gfxinit;	/* graphics core initialized? */
+
+	__u32 sisusb_vrambase;
+	__u32 sisusb_mmiobase;
+	__u32 sisusb_iobase;
+	__u32 sisusb_pcibase;
+
+	__u32 sisusb_vramsize;	/* framebuffer size in bytes */
+
+	__u32 sisusb_minor;
+
+	__u32 sisusb_fbdevactive;	/* != 0 if framebuffer device active */
+
+	__u32 sisusb_conactive;	/* != 0 if console driver active */
+
+	__u8 sisusb_reserved[28];	/* for future use */
+};
+
+struct sisusb_command {
+	__u8 operation;		/* see below */
+	__u8 data0;		/* operation dependent */
+	__u8 data1;		/* operation dependent */
+	__u8 data2;		/* operation dependent */
+	__u32 data3;		/* operation dependent */
+	__u32 data4;		/* for future use */
+};
+
+#define SUCMD_GET	0x01	/* for all: data0 = index, data3 = port */
+#define SUCMD_SET	0x02	/* data1 = value */
+#define SUCMD_SETOR	0x03	/* data1 = or */
+#define SUCMD_SETAND	0x04	/* data1 = and */
+#define SUCMD_SETANDOR	0x05	/* data1 = and, data2 = or */
+#define SUCMD_SETMASK	0x06	/* data1 = data, data2 = mask */
+
+#define SUCMD_CLRSCR	0x07	/* data0:1:2 = length, data3 = address */
+
+#define SUCMD_HANDLETEXTMODE 0x08	/* Reset/destroy text mode */
+
+#define SUCMD_SETMODE	0x09	/* Set a display mode (data3 = SiS mode) */
+#define SUCMD_SETVESAMODE 0x0a	/* Set a display mode (data3 = VESA mode) */
+
+#define SISUSB_COMMAND		_IOWR(0xF3,0x3D,struct sisusb_command)
+#define SISUSB_GET_CONFIG_SIZE	_IOR(0xF3,0x3E,__u32)
+#define SISUSB_GET_CONFIG	_IOR(0xF3,0x3F,struct sisusb_info)
+
+#endif /* SISUSB_H */