Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 448 insertions, 0 deletions

diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
new file mode 100644
index 000000000..bd47c4437
--- /dev/null
+++ b/drivers/usb/misc/usb3503.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SMSC USB3503 USB 2.0 hub controller driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb3503.h>
+#include <linux/regmap.h>
+
+#define USB3503_VIDL		0x00
+#define USB3503_VIDM		0x01
+#define USB3503_PIDL		0x02
+#define USB3503_PIDM		0x03
+#define USB3503_DIDL		0x04
+#define USB3503_DIDM		0x05
+
+#define USB3503_CFG1		0x06
+#define USB3503_SELF_BUS_PWR	(1 << 7)
+
+#define USB3503_CFG2		0x07
+#define USB3503_CFG3		0x08
+#define USB3503_NRD		0x09
+
+#define USB3503_PDS		0x0a
+
+#define USB3503_SP_ILOCK	0xe7
+#define USB3503_SPILOCK_CONNECT	(1 << 1)
+#define USB3503_SPILOCK_CONFIG	(1 << 0)
+
+#define USB3503_CFGP		0xee
+#define USB3503_CLKSUSP		(1 << 7)
+
+#define USB3503_RESET		0xff
+
+struct usb3503 {
+	enum usb3503_mode	mode;
+	struct regmap		*regmap;
+	struct device		*dev;
+	struct clk		*clk;
+	u8	port_off_mask;
+	struct gpio_desc	*intn;
+	struct gpio_desc 	*reset;
+	struct gpio_desc 	*connect;
+	bool	secondary_ref_clk;
+};
+
+static int usb3503_reset(struct usb3503 *hub, int state)
+{
+	if (!state && hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 0);
+
+	if (hub->reset)
+		gpiod_set_value_cansleep(hub->reset, !state);
+
+	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
+	if (state)
+		usleep_range(4000, 10000);
+
+	return 0;
+}
+
+static int usb3503_connect(struct usb3503 *hub)
+{
+	struct device *dev = hub->dev;
+	int err;
+
+	usb3503_reset(hub, 1);
+
+	if (hub->regmap) {
+		/* SP_ILOCK: set connect_n, config_n for config */
+		err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
+			   (USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
+		}
+
+		/* PDS : Set the ports which are disabled in self-powered mode. */
+		if (hub->port_off_mask) {
+			err = regmap_update_bits(hub->regmap, USB3503_PDS,
+					hub->port_off_mask,
+					hub->port_off_mask);
+			if (err < 0) {
+				dev_err(dev, "PDS failed (%d)\n", err);
+				return err;
+			}
+		}
+
+		/* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */
+		err = regmap_update_bits(hub->regmap, USB3503_CFG1,
+					 USB3503_SELF_BUS_PWR,
+					 USB3503_SELF_BUS_PWR);
+		if (err < 0) {
+			dev_err(dev, "CFG1 failed (%d)\n", err);
+			return err;
+		}
+
+		/* SP_LOCK: clear connect_n, config_n for hub connect */
+		err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
+					 (USB3503_SPILOCK_CONNECT
+					  | USB3503_SPILOCK_CONFIG), 0);
+		if (err < 0) {
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
+		}
+	}
+
+	if (hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 1);
+
+	hub->mode = USB3503_MODE_HUB;
+	dev_info(dev, "switched to HUB mode\n");
+
+	return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+	struct device *dev = hub->dev;
+	int err = 0;
+
+	switch (mode) {
+	case USB3503_MODE_HUB:
+		err = usb3503_connect(hub);
+		break;
+
+	case USB3503_MODE_STANDBY:
+		usb3503_reset(hub, 0);
+		dev_info(dev, "switched to STANDBY mode\n");
+		break;
+
+	default:
+		dev_err(dev, "unknown mode is requested\n");
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
+
+static const struct regmap_config usb3503_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = USB3503_RESET,
+};
+
+static int usb3503_probe(struct usb3503 *hub)
+{
+	struct device *dev = hub->dev;
+	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node *np = dev->of_node;
+	int err;
+	bool is_clk_enabled = false;
+	u32 mode = USB3503_MODE_HUB;
+	const u32 *property;
+	enum gpiod_flags flags;
+	int len;
+
+	if (pdata) {
+		hub->port_off_mask	= pdata->port_off_mask;
+		hub->mode		= pdata->initial_mode;
+	} else if (np) {
+		u32 rate = 0;
+		hub->port_off_mask = 0;
+
+		if (!of_property_read_u32(np, "refclk-frequency", &rate)) {
+			switch (rate) {
+			case 38400000:
+			case 26000000:
+			case 19200000:
+			case 12000000:
+				hub->secondary_ref_clk = 0;
+				break;
+			case 24000000:
+			case 27000000:
+			case 25000000:
+			case 50000000:
+				hub->secondary_ref_clk = 1;
+				break;
+			default:
+				dev_err(dev,
+					"unsupported reference clock rate (%d)\n",
+					(int) rate);
+				return -EINVAL;
+			}
+		}
+
+		hub->clk = devm_clk_get_optional(dev, "refclk");
+		if (IS_ERR(hub->clk)) {
+			dev_err(dev, "unable to request refclk (%ld)\n",
+					PTR_ERR(hub->clk));
+			return PTR_ERR(hub->clk);
+		}
+
+		if (rate != 0) {
+			err = clk_set_rate(hub->clk, rate);
+			if (err) {
+				dev_err(dev,
+					"unable to set reference clock rate to %d\n",
+					(int)rate);
+				return err;
+			}
+		}
+
+		err = clk_prepare_enable(hub->clk);
+		if (err) {
+			dev_err(dev, "unable to enable reference clock\n");
+			return err;
+		}
+
+		is_clk_enabled = true;
+		property = of_get_property(np, "disabled-ports", &len);
+		if (property && (len / sizeof(u32)) > 0) {
+			int i;
+			for (i = 0; i < len / sizeof(u32); i++) {
+				u32 port = be32_to_cpu(property[i]);
+				if ((1 <= port) && (port <= 3))
+					hub->port_off_mask |= (1 << port);
+			}
+		}
+
+		of_property_read_u32(np, "initial-mode", &mode);
+		hub->mode = mode;
+	}
+
+	if (hub->secondary_ref_clk)
+		flags = GPIOD_OUT_LOW;
+	else
+		flags = GPIOD_OUT_HIGH;
+	hub->intn = devm_gpiod_get_optional(dev, "intn", flags);
+	if (IS_ERR(hub->intn)) {
+		err = PTR_ERR(hub->intn);
+		goto err_clk;
+	}
+	if (hub->intn)
+		gpiod_set_consumer_name(hub->intn, "usb3503 intn");
+
+	hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW);
+	if (IS_ERR(hub->connect)) {
+		err = PTR_ERR(hub->connect);
+		goto err_clk;
+	}
+	if (hub->connect)
+		gpiod_set_consumer_name(hub->connect, "usb3503 connect");
+
+	hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(hub->reset)) {
+		err = PTR_ERR(hub->reset);
+		goto err_clk;
+	}
+	if (hub->reset) {
+		/* Datasheet defines a hardware reset to be at least 100us */
+		usleep_range(100, 10000);
+		gpiod_set_consumer_name(hub->reset, "usb3503 reset");
+	}
+
+	if (hub->port_off_mask && !hub->regmap)
+		dev_err(dev, "Ports disabled with no control interface\n");
+
+	usb3503_switch_mode(hub, hub->mode);
+
+	dev_info(dev, "%s: probed in %s mode\n", __func__,
+			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
+
+	return 0;
+
+err_clk:
+	if (is_clk_enabled)
+		clk_disable_unprepare(hub->clk);
+	return err;
+}
+
+static int usb3503_i2c_probe(struct i2c_client *i2c)
+{
+	struct usb3503 *hub;
+	int err;
+
+	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, hub);
+	hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
+	if (IS_ERR(hub->regmap)) {
+		err = PTR_ERR(hub->regmap);
+		dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
+		return err;
+	}
+	hub->dev = &i2c->dev;
+
+	return usb3503_probe(hub);
+}
+
+static void usb3503_i2c_remove(struct i2c_client *i2c)
+{
+	struct usb3503 *hub;
+
+	hub = i2c_get_clientdata(i2c);
+	clk_disable_unprepare(hub->clk);
+}
+
+static int usb3503_platform_probe(struct platform_device *pdev)
+{
+	struct usb3503 *hub;
+
+	hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+	hub->dev = &pdev->dev;
+	platform_set_drvdata(pdev, hub);
+
+	return usb3503_probe(hub);
+}
+
+static int usb3503_platform_remove(struct platform_device *pdev)
+{
+	struct usb3503 *hub;
+
+	hub = platform_get_drvdata(pdev);
+	clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_suspend(struct usb3503 *hub)
+{
+	usb3503_switch_mode(hub, USB3503_MODE_STANDBY);
+	clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_resume(struct usb3503 *hub)
+{
+	clk_prepare_enable(hub->clk);
+	usb3503_switch_mode(hub, hub->mode);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return usb3503_suspend(i2c_get_clientdata(client));
+}
+
+static int __maybe_unused usb3503_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return usb3503_resume(i2c_get_clientdata(client));
+}
+
+static int __maybe_unused usb3503_platform_suspend(struct device *dev)
+{
+	return usb3503_suspend(dev_get_drvdata(dev));
+}
+
+static int __maybe_unused usb3503_platform_resume(struct device *dev)
+{
+	return usb3503_resume(dev_get_drvdata(dev));
+}
+
+static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend,
+		usb3503_i2c_resume);
+
+static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend,
+		usb3503_platform_resume);
+
+static const struct i2c_device_id usb3503_id[] = {
+	{ USB3503_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, usb3503_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb3503_of_match[] = {
+	{ .compatible = "smsc,usb3503", },
+	{ .compatible = "smsc,usb3503a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, usb3503_of_match);
+#endif
+
+static struct i2c_driver usb3503_i2c_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.pm = pm_ptr(&usb3503_i2c_pm_ops),
+		.of_match_table = of_match_ptr(usb3503_of_match),
+	},
+	.probe_new	= usb3503_i2c_probe,
+	.remove		= usb3503_i2c_remove,
+	.id_table	= usb3503_id,
+};
+
+static struct platform_driver usb3503_platform_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.of_match_table = of_match_ptr(usb3503_of_match),
+		.pm = pm_ptr(&usb3503_platform_pm_ops),
+	},
+	.probe		= usb3503_platform_probe,
+	.remove		= usb3503_platform_remove,
+};
+
+static int __init usb3503_init(void)
+{
+	int err;
+
+	err = i2c_add_driver(&usb3503_i2c_driver);
+	if (err) {
+		pr_err("usb3503: Failed to register I2C driver: %d\n", err);
+		return err;
+	}
+
+	err = platform_driver_register(&usb3503_platform_driver);
+	if (err) {
+		pr_err("usb3503: Failed to register platform driver: %d\n",
+		       err);
+		i2c_del_driver(&usb3503_i2c_driver);
+		return err;
+	}
+
+	return 0;
+}
+module_init(usb3503_init);
+
+static void __exit usb3503_exit(void)
+{
+	platform_driver_unregister(&usb3503_platform_driver);
+	i2c_del_driver(&usb3503_i2c_driver);
+}
+module_exit(usb3503_exit);
+
+MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
+MODULE_DESCRIPTION("USB3503 USB HUB driver");
+MODULE_LICENSE("GPL");