Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 772 insertions, 0 deletions

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
new file mode 100644
index 000000000..80236e7b0
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_gadget.c - MediaTek usb3 DRD peripheral support
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include "mtu3.h"
+#include "mtu3_trace.h"
+
+void mtu3_req_complete(struct mtu3_ep *mep,
+		     struct usb_request *req, int status)
+__releases(mep->mtu->lock)
+__acquires(mep->mtu->lock)
+{
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3 *mtu = mreq->mtu;
+
+	list_del(&mreq->list);
+	if (req->status == -EINPROGRESS)
+		req->status = status;
+
+	trace_mtu3_req_complete(mreq);
+	spin_unlock(&mtu->lock);
+
+	/* ep0 makes use of PIO, needn't unmap it */
+	if (mep->epnum)
+		usb_gadget_unmap_request(&mtu->g, req, mep->is_in);
+
+	dev_dbg(mtu->dev, "%s complete req: %p, sts %d, %d/%d\n",
+		mep->name, req, req->status, req->actual, req->length);
+
+	usb_gadget_giveback_request(&mep->ep, req);
+	spin_lock(&mtu->lock);
+}
+
+static void nuke(struct mtu3_ep *mep, const int status)
+{
+	struct mtu3_request *mreq = NULL;
+
+	if (list_empty(&mep->req_list))
+		return;
+
+	dev_dbg(mep->mtu->dev, "abort %s's req: sts %d\n", mep->name, status);
+
+	/* exclude EP0 */
+	if (mep->epnum)
+		mtu3_qmu_flush(mep);
+
+	while (!list_empty(&mep->req_list)) {
+		mreq = list_first_entry(&mep->req_list,
+					struct mtu3_request, list);
+		mtu3_req_complete(mep, &mreq->request, status);
+	}
+}
+
+static int mtu3_ep_enable(struct mtu3_ep *mep)
+{
+	const struct usb_endpoint_descriptor *desc;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	struct mtu3 *mtu = mep->mtu;
+	u32 interval = 0;
+	u32 mult = 0;
+	u32 burst = 0;
+	int ret;
+
+	desc = mep->desc;
+	comp_desc = mep->comp_desc;
+	mep->type = usb_endpoint_type(desc);
+	mep->maxp = usb_endpoint_maxp(desc);
+
+	switch (mtu->g.speed) {
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		if (usb_endpoint_xfer_int(desc) ||
+				usb_endpoint_xfer_isoc(desc)) {
+			interval = desc->bInterval;
+			interval = clamp_val(interval, 1, 16);
+			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
+				mult = comp_desc->bmAttributes;
+		}
+		if (comp_desc)
+			burst = comp_desc->bMaxBurst;
+
+		break;
+	case USB_SPEED_HIGH:
+		if (usb_endpoint_xfer_isoc(desc) ||
+				usb_endpoint_xfer_int(desc)) {
+			interval = desc->bInterval;
+			interval = clamp_val(interval, 1, 16);
+			mult = usb_endpoint_maxp_mult(desc) - 1;
+		}
+		break;
+	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_isoc(desc))
+			interval = clamp_val(desc->bInterval, 1, 16);
+		else if (usb_endpoint_xfer_int(desc))
+			interval = clamp_val(desc->bInterval, 1, 255);
+
+		break;
+	default:
+		break; /*others are ignored */
+	}
+
+	dev_dbg(mtu->dev, "%s maxp:%d, interval:%d, burst:%d, mult:%d\n",
+		__func__, mep->maxp, interval, burst, mult);
+
+	mep->ep.maxpacket = mep->maxp;
+	mep->ep.desc = desc;
+	mep->ep.comp_desc = comp_desc;
+
+	/* slot mainly affects bulk/isoc transfer, so ignore int */
+	mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot;
+
+	ret = mtu3_config_ep(mtu, mep, interval, burst, mult);
+	if (ret < 0)
+		return ret;
+
+	ret = mtu3_gpd_ring_alloc(mep);
+	if (ret < 0) {
+		mtu3_deconfig_ep(mtu, mep);
+		return ret;
+	}
+
+	mtu3_qmu_start(mep);
+
+	return 0;
+}
+
+static int mtu3_ep_disable(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+
+	mtu3_qmu_stop(mep);
+
+	/* abort all pending requests */
+	nuke(mep, -ESHUTDOWN);
+	mtu3_deconfig_ep(mtu, mep);
+	mtu3_gpd_ring_free(mep);
+
+	mep->desc = NULL;
+	mep->ep.desc = NULL;
+	mep->comp_desc = NULL;
+	mep->type = 0;
+	mep->flags = 0;
+
+	return 0;
+}
+
+static int mtu3_gadget_ep_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mtu3_ep *mep;
+	struct mtu3 *mtu;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("%s invalid parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("%s missing wMaxPacketSize\n", __func__);
+		return -EINVAL;
+	}
+	mep = to_mtu3_ep(ep);
+	mtu = mep->mtu;
+
+	/* check ep number and direction against endpoint */
+	if (usb_endpoint_num(desc) != mep->epnum)
+		return -EINVAL;
+
+	if (!!usb_endpoint_dir_in(desc) ^ !!mep->is_in)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, ep->name);
+
+	if (mep->flags & MTU3_EP_ENABLED) {
+		dev_WARN_ONCE(mtu->dev, true, "%s is already enabled\n",
+				mep->name);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mep->desc = desc;
+	mep->comp_desc = ep->comp_desc;
+
+	ret = mtu3_ep_enable(mep);
+	if (ret)
+		goto error;
+
+	mep->flags = MTU3_EP_ENABLED;
+	mtu->active_ep++;
+
+error:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	dev_dbg(mtu->dev, "%s active_ep=%d\n", __func__, mtu->active_ep);
+	trace_mtu3_gadget_ep_enable(mep);
+
+	return ret;
+}
+
+static int mtu3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, mep->name);
+	trace_mtu3_gadget_ep_disable(mep);
+
+	if (!(mep->flags & MTU3_EP_ENABLED)) {
+		dev_warn(mtu->dev, "%s is already disabled\n", mep->name);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu3_ep_disable(mep);
+	mep->flags = 0;
+	mtu->active_ep--;
+	spin_unlock_irqrestore(&(mtu->lock), flags);
+
+	dev_dbg(mtu->dev, "%s active_ep=%d, mtu3 is_active=%d\n",
+		__func__, mtu->active_ep, mtu->is_active);
+
+	return 0;
+}
+
+struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq;
+
+	mreq = kzalloc(sizeof(*mreq), gfp_flags);
+	if (!mreq)
+		return NULL;
+
+	mreq->request.dma = DMA_ADDR_INVALID;
+	mreq->epnum = mep->epnum;
+	mreq->mep = mep;
+	INIT_LIST_HEAD(&mreq->list);
+	trace_mtu3_alloc_request(mreq);
+
+	return &mreq->request;
+}
+
+void mtu3_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	struct mtu3_request *mreq = to_mtu3_request(req);
+
+	trace_mtu3_free_request(mreq);
+	kfree(mreq);
+}
+
+static int mtu3_gadget_queue(struct usb_ep *ep,
+		struct usb_request *req, gfp_t gfp_flags)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!req->buf)
+		return -ENODATA;
+
+	if (mreq->mep != mep)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s %s EP%d(%s), req=%p, maxp=%d, len#%d\n",
+		__func__, mep->is_in ? "TX" : "RX", mreq->epnum, ep->name,
+		mreq, ep->maxpacket, mreq->request.length);
+
+	if (req->length > GPD_BUF_SIZE ||
+	    (mtu->gen2cp && req->length > GPD_BUF_SIZE_EL)) {
+		dev_warn(mtu->dev,
+			"req length > supported MAX:%d requested:%d\n",
+			mtu->gen2cp ? GPD_BUF_SIZE_EL : GPD_BUF_SIZE,
+			req->length);
+		return -EOPNOTSUPP;
+	}
+
+	/* don't queue if the ep is down */
+	if (!mep->desc) {
+		dev_dbg(mtu->dev, "req=%p queued to %s while it's disabled\n",
+			req, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	mreq->mtu = mtu;
+	mreq->request.actual = 0;
+	mreq->request.status = -EINPROGRESS;
+
+	ret = usb_gadget_map_request(&mtu->g, req, mep->is_in);
+	if (ret) {
+		dev_err(mtu->dev, "dma mapping failed\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	if (mtu3_prepare_transfer(mep)) {
+		ret = -EAGAIN;
+		goto error;
+	}
+
+	list_add_tail(&mreq->list, &mep->req_list);
+	mtu3_insert_gpd(mep, mreq);
+	mtu3_qmu_resume(mep);
+
+error:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	trace_mtu3_gadget_queue(mreq);
+
+	return ret;
+}
+
+static int mtu3_gadget_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3_request *r;
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (mreq->mep != mep)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s : req=%p\n", __func__, req);
+	trace_mtu3_gadget_dequeue(mreq);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	list_for_each_entry(r, &mep->req_list, list) {
+		if (r == mreq)
+			break;
+	}
+	if (r != mreq) {
+		dev_dbg(mtu->dev, "req=%p not queued to %s\n", req, ep->name);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	mtu3_qmu_flush(mep);  /* REVISIT: set BPS ?? */
+	mtu3_req_complete(mep, req, -ECONNRESET);
+	mtu3_qmu_start(mep);
+
+done:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return ret;
+}
+
+/*
+ * Set or clear the halt bit of an EP.
+ * A halted EP won't TX/RX any data but will queue requests.
+ */
+static int mtu3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3 *mtu = mep->mtu;
+	struct mtu3_request *mreq;
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(mtu->dev, "%s : %s...", __func__, ep->name);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	if (mep->type == USB_ENDPOINT_XFER_ISOC) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	mreq = next_request(mep);
+	if (value) {
+		/*
+		 * If there is not request for TX-EP, QMU will not transfer
+		 * data to TX-FIFO, so no need check whether TX-FIFO
+		 * holds bytes or not here
+		 */
+		if (mreq) {
+			dev_dbg(mtu->dev, "req in progress, cannot halt %s\n",
+				ep->name);
+			ret = -EAGAIN;
+			goto done;
+		}
+	} else {
+		mep->flags &= ~MTU3_EP_WEDGE;
+	}
+
+	dev_dbg(mtu->dev, "%s %s stall\n", ep->name, value ? "set" : "clear");
+
+	mtu3_ep_stall_set(mep, value);
+
+done:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	trace_mtu3_gadget_ep_set_halt(mep);
+
+	return ret;
+}
+
+/* Sets the halt feature with the clear requests ignored */
+static int mtu3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+
+	mep->flags |= MTU3_EP_WEDGE;
+
+	return usb_ep_set_halt(ep);
+}
+
+static const struct usb_ep_ops mtu3_ep_ops = {
+	.enable = mtu3_gadget_ep_enable,
+	.disable = mtu3_gadget_ep_disable,
+	.alloc_request = mtu3_alloc_request,
+	.free_request = mtu3_free_request,
+	.queue = mtu3_gadget_queue,
+	.dequeue = mtu3_gadget_dequeue,
+	.set_halt = mtu3_gadget_ep_set_halt,
+	.set_wedge = mtu3_gadget_ep_set_wedge,
+};
+
+static int mtu3_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+
+	return (int)mtu3_readl(mtu->mac_base, U3D_USB20_FRAME_NUM);
+}
+
+static void function_wake_notif(struct mtu3 *mtu, u8 intf)
+{
+	mtu3_writel(mtu->mac_base, U3D_DEV_NOTIF_0,
+		    TYPE_FUNCTION_WAKE | DEV_NOTIF_VAL_FW(intf));
+	mtu3_setbits(mtu->mac_base, U3D_DEV_NOTIF_0, SEND_DEV_NOTIF);
+}
+
+static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	/* remote wakeup feature is not enabled by host */
+	if (!mtu->may_wakeup)
+		return  -EOPNOTSUPP;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	if (mtu->g.speed >= USB_SPEED_SUPER) {
+		/*
+		 * class driver may do function wakeup even UFP is in U0,
+		 * and UX_EXIT only takes effect in U1/U2/U3;
+		 */
+		mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
+		/*
+		 * Assume there's only one function on the composite device
+		 * and enable remote wake for the first interface.
+		 * FIXME if the IAD (interface association descriptor) shows
+		 * there is more than one function.
+		 */
+		function_wake_notif(mtu, 0);
+	} else {
+		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+		spin_unlock_irqrestore(&mtu->lock, flags);
+		usleep_range(10000, 11000);
+		spin_lock_irqsave(&mtu->lock, flags);
+		mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+	}
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	return 0;
+}
+
+static int mtu3_gadget_set_self_powered(struct usb_gadget *gadget,
+		int is_selfpowered)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+
+	mtu->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s (%s) for %sactive device\n", __func__,
+		is_on ? "on" : "off", mtu->is_active ? "" : "in");
+
+	pm_runtime_get_sync(mtu->dev);
+
+	/* we'd rather not pullup unless the device is active. */
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	is_on = !!is_on;
+	if (!mtu->is_active) {
+		/* save it for mtu3_start() to process the request */
+		mtu->softconnect = is_on;
+	} else if (is_on != mtu->softconnect) {
+		mtu->softconnect = is_on;
+		mtu3_dev_on_off(mtu, is_on);
+	}
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	pm_runtime_put(mtu->dev);
+
+	return 0;
+}
+
+static int mtu3_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	if (mtu->gadget_driver) {
+		dev_err(mtu->dev, "%s is already bound to %s\n",
+			mtu->g.name, mtu->gadget_driver->driver.name);
+		return -EBUSY;
+	}
+
+	dev_dbg(mtu->dev, "bind driver %s\n", driver->function);
+	pm_runtime_get_sync(mtu->dev);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	mtu->softconnect = 0;
+	mtu->gadget_driver = driver;
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		mtu3_start(mtu);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	pm_runtime_put(mtu->dev);
+
+	return 0;
+}
+
+static void stop_activity(struct mtu3 *mtu)
+{
+	struct usb_gadget_driver *driver = mtu->gadget_driver;
+	int i;
+
+	/* don't disconnect if it's not connected */
+	if (mtu->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		mtu->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (mtu->softconnect) {
+		mtu->softconnect = 0;
+		mtu3_dev_on_off(mtu, 0);
+	}
+
+	/*
+	 * killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	nuke(mtu->ep0, -ESHUTDOWN);
+	for (i = 1; i < mtu->num_eps; i++) {
+		nuke(mtu->in_eps + i, -ESHUTDOWN);
+		nuke(mtu->out_eps + i, -ESHUTDOWN);
+	}
+
+	if (driver) {
+		spin_unlock(&mtu->lock);
+		driver->disconnect(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+static int mtu3_gadget_stop(struct usb_gadget *g)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	stop_activity(mtu);
+	mtu->gadget_driver = NULL;
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		mtu3_stop(mtu);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	synchronize_irq(mtu->irq);
+	return 0;
+}
+
+static void
+mtu3_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, usb_speed_string(speed));
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu->speed = speed;
+	spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
+static void mtu3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, enable ? "en" : "dis");
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu->async_callbacks = enable;
+	spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
+static const struct usb_gadget_ops mtu3_gadget_ops = {
+	.get_frame = mtu3_gadget_get_frame,
+	.wakeup = mtu3_gadget_wakeup,
+	.set_selfpowered = mtu3_gadget_set_self_powered,
+	.pullup = mtu3_gadget_pullup,
+	.udc_start = mtu3_gadget_start,
+	.udc_stop = mtu3_gadget_stop,
+	.udc_set_speed = mtu3_gadget_set_speed,
+	.udc_async_callbacks = mtu3_gadget_async_callbacks,
+};
+
+static void mtu3_state_reset(struct mtu3 *mtu)
+{
+	mtu->address = 0;
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+	mtu->may_wakeup = 0;
+	mtu->u1_enable = 0;
+	mtu->u2_enable = 0;
+	mtu->delayed_status = false;
+	mtu->test_mode = false;
+}
+
+static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
+		u32 epnum, u32 is_in)
+{
+	mep->epnum = epnum;
+	mep->mtu = mtu;
+	mep->is_in = is_in;
+
+	INIT_LIST_HEAD(&mep->req_list);
+
+	sprintf(mep->name, "ep%d%s", epnum,
+		!epnum ? "" : (is_in ? "in" : "out"));
+
+	mep->ep.name = mep->name;
+	INIT_LIST_HEAD(&mep->ep.ep_list);
+
+	/* initialize maxpacket as SS */
+	if (!epnum) {
+		usb_ep_set_maxpacket_limit(&mep->ep, 512);
+		mep->ep.caps.type_control = true;
+		mep->ep.ops = &mtu3_ep0_ops;
+		mtu->g.ep0 = &mep->ep;
+	} else {
+		usb_ep_set_maxpacket_limit(&mep->ep, 1024);
+		mep->ep.caps.type_iso = true;
+		mep->ep.caps.type_bulk = true;
+		mep->ep.caps.type_int = true;
+		mep->ep.ops = &mtu3_ep_ops;
+		list_add_tail(&mep->ep.ep_list, &mtu->g.ep_list);
+	}
+
+	dev_dbg(mtu->dev, "%s, name=%s, maxp=%d\n", __func__, mep->ep.name,
+		 mep->ep.maxpacket);
+
+	if (!epnum) {
+		mep->ep.caps.dir_in = true;
+		mep->ep.caps.dir_out = true;
+	} else if (is_in) {
+		mep->ep.caps.dir_in = true;
+	} else {
+		mep->ep.caps.dir_out = true;
+	}
+}
+
+static void mtu3_gadget_init_eps(struct mtu3 *mtu)
+{
+	u8 epnum;
+
+	/* initialize endpoint list just once */
+	INIT_LIST_HEAD(&(mtu->g.ep_list));
+
+	dev_dbg(mtu->dev, "%s num_eps(1 for a pair of tx&rx ep)=%d\n",
+		__func__, mtu->num_eps);
+
+	init_hw_ep(mtu, mtu->ep0, 0, 0);
+	for (epnum = 1; epnum < mtu->num_eps; epnum++) {
+		init_hw_ep(mtu, mtu->in_eps + epnum, epnum, 1);
+		init_hw_ep(mtu, mtu->out_eps + epnum, epnum, 0);
+	}
+}
+
+int mtu3_gadget_setup(struct mtu3 *mtu)
+{
+	mtu->g.ops = &mtu3_gadget_ops;
+	mtu->g.max_speed = mtu->max_speed;
+	mtu->g.speed = USB_SPEED_UNKNOWN;
+	mtu->g.sg_supported = 0;
+	mtu->g.name = MTU3_DRIVER_NAME;
+	mtu->g.irq = mtu->irq;
+	mtu->is_active = 0;
+	mtu->delayed_status = false;
+
+	mtu3_gadget_init_eps(mtu);
+
+	return usb_add_gadget_udc(mtu->dev, &mtu->g);
+}
+
+void mtu3_gadget_cleanup(struct mtu3 *mtu)
+{
+	usb_del_gadget_udc(&mtu->g);
+}
+
+void mtu3_gadget_resume(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget RESUME\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->resume) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->resume(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+/* called when SOF packets stop for 3+ msec or enters U3 */
+void mtu3_gadget_suspend(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget SUSPEND\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->suspend) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->suspend(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void mtu3_gadget_disconnect(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget DISCONNECT\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->disconnect) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->disconnect(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+
+	mtu3_state_reset(mtu);
+	usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED);
+}
+
+void mtu3_gadget_reset(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget RESET\n");
+
+	/* report disconnect, if we didn't flush EP state */
+	if (mtu->g.speed != USB_SPEED_UNKNOWN)
+		mtu3_gadget_disconnect(mtu);
+	else
+		mtu3_state_reset(mtu);
+}