Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 627 insertions, 0 deletions

diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
new file mode 100644
index 000000000..d78ae52b4
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/reset.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+#include "mtu3_debug.h"
+
+/* u2-port0 should be powered on and enabled; */
+int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	u32 value, check_val;
+	int ret;
+
+	check_val = ex_clks | SSUSB_SYS125_RST_B_STS | SSUSB_SYSPLL_STABLE |
+			SSUSB_REF_RST_B_STS;
+
+	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
+			(check_val == (value & check_val)), 100, 20000);
+	if (ret) {
+		dev_err(ssusb->dev, "clks of sts1 are not stable!\n");
+		return ret;
+	}
+
+	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value,
+			(value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000);
+	if (ret) {
+		dev_err(ssusb->dev, "mac2 clock is not stable\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wait_for_ip_sleep(struct ssusb_mtk *ssusb)
+{
+	bool sleep_check = true;
+	u32 value;
+	int ret;
+
+	if (!ssusb->is_host)
+		sleep_check = ssusb_gadget_ip_sleep_check(ssusb);
+
+	if (!sleep_check)
+		return 0;
+
+	/* wait for ip enter sleep mode */
+	ret = readl_poll_timeout(ssusb->ippc_base + U3D_SSUSB_IP_PW_STS1, value,
+				 (value & SSUSB_IP_SLEEP_STS), 100, 100000);
+	if (ret) {
+		dev_err(ssusb->dev, "ip sleep failed!!!\n");
+		ret = -EBUSY;
+	} else {
+		/* workaround: avoid wrong wakeup signal latch for some soc */
+		usleep_range(100, 200);
+	}
+
+	return ret;
+}
+
+static int ssusb_phy_init(struct ssusb_mtk *ssusb)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ret = phy_init(ssusb->phys[i]);
+		if (ret)
+			goto exit_phy;
+	}
+	return 0;
+
+exit_phy:
+	for (; i > 0; i--)
+		phy_exit(ssusb->phys[i - 1]);
+
+	return ret;
+}
+
+static int ssusb_phy_exit(struct ssusb_mtk *ssusb)
+{
+	int i;
+
+	for (i = 0; i < ssusb->num_phys; i++)
+		phy_exit(ssusb->phys[i]);
+
+	return 0;
+}
+
+static int ssusb_phy_power_on(struct ssusb_mtk *ssusb)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ret = phy_power_on(ssusb->phys[i]);
+		if (ret)
+			goto power_off_phy;
+	}
+	return 0;
+
+power_off_phy:
+	for (; i > 0; i--)
+		phy_power_off(ssusb->phys[i - 1]);
+
+	return ret;
+}
+
+static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
+{
+	unsigned int i;
+
+	for (i = 0; i < ssusb->num_phys; i++)
+		phy_power_off(ssusb->phys[i]);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+{
+	int ret = 0;
+
+	ret = regulator_enable(ssusb->vusb33);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable vusb33\n");
+		goto vusb33_err;
+	}
+
+	ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
+	if (ret)
+		goto clks_err;
+
+	ret = ssusb_phy_init(ssusb);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to init phy\n");
+		goto phy_init_err;
+	}
+
+	ret = ssusb_phy_power_on(ssusb);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to power on phy\n");
+		goto phy_err;
+	}
+
+	return 0;
+
+phy_err:
+	ssusb_phy_exit(ssusb);
+phy_init_err:
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+clks_err:
+	regulator_disable(ssusb->vusb33);
+vusb33_err:
+	return ret;
+}
+
+static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
+{
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+	regulator_disable(ssusb->vusb33);
+	ssusb_phy_power_off(ssusb);
+	ssusb_phy_exit(ssusb);
+}
+
+static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
+{
+	/* reset whole ip (xhci & u3d) */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+	udelay(1);
+	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+
+	/*
+	 * device ip may be powered on in firmware/BROM stage before entering
+	 * kernel stage;
+	 * power down device ip, otherwise ip-sleep will fail when working as
+	 * host only mode
+	 */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+}
+
+static void ssusb_u3_drd_check(struct ssusb_mtk *ssusb)
+{
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	u32 dev_u3p_num;
+	u32 host_u3p_num;
+	u32 value;
+
+	/* u3 port0 is disabled */
+	if (ssusb->u3p_dis_msk & BIT(0)) {
+		otg_sx->is_u3_drd = false;
+		goto out;
+	}
+
+	value = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_DEV_CAP);
+	dev_u3p_num = SSUSB_IP_DEV_U3_PORT_NUM(value);
+
+	value = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
+	host_u3p_num = SSUSB_IP_XHCI_U3_PORT_NUM(value);
+
+	otg_sx->is_u3_drd = !!(dev_u3p_num && host_u3p_num);
+
+out:
+	dev_info(ssusb->dev, "usb3-drd: %d\n", otg_sx->is_u3_drd);
+}
+
+static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	struct clk_bulk_data *clks = ssusb->clks;
+	struct device *dev = &pdev->dev;
+	int i;
+	int ret;
+
+	ssusb->vusb33 = devm_regulator_get(dev, "vusb33");
+	if (IS_ERR(ssusb->vusb33)) {
+		dev_err(dev, "failed to get vusb33\n");
+		return PTR_ERR(ssusb->vusb33);
+	}
+
+	clks[0].id = "sys_ck";
+	clks[1].id = "ref_ck";
+	clks[2].id = "mcu_ck";
+	clks[3].id = "dma_ck";
+	ret = devm_clk_bulk_get_optional(dev, BULK_CLKS_CNT, clks);
+	if (ret)
+		return ret;
+
+	ssusb->num_phys = of_count_phandle_with_args(node,
+			"phys", "#phy-cells");
+	if (ssusb->num_phys > 0) {
+		ssusb->phys = devm_kcalloc(dev, ssusb->num_phys,
+					sizeof(*ssusb->phys), GFP_KERNEL);
+		if (!ssusb->phys)
+			return -ENOMEM;
+	} else {
+		ssusb->num_phys = 0;
+	}
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i);
+		if (IS_ERR(ssusb->phys[i])) {
+			dev_err(dev, "failed to get phy-%d\n", i);
+			return PTR_ERR(ssusb->phys[i]);
+		}
+	}
+
+	ssusb->ippc_base = devm_platform_ioremap_resource_byname(pdev, "ippc");
+	if (IS_ERR(ssusb->ippc_base))
+		return PTR_ERR(ssusb->ippc_base);
+
+	ssusb->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (ssusb->wakeup_irq == -EPROBE_DEFER)
+		return ssusb->wakeup_irq;
+
+	ssusb->dr_mode = usb_get_dr_mode(dev);
+	if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
+		ssusb->dr_mode = USB_DR_MODE_OTG;
+
+	of_property_read_u32(node, "mediatek,u3p-dis-msk", &ssusb->u3p_dis_msk);
+
+	if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		goto out;
+
+	/* if host role is supported */
+	ret = ssusb_wakeup_of_property_parse(ssusb, node);
+	if (ret) {
+		dev_err(dev, "failed to parse uwk property\n");
+		return ret;
+	}
+
+	/* optional property, ignore the error if it does not exist */
+	of_property_read_u32(node, "mediatek,u2p-dis-msk",
+			     &ssusb->u2p_dis_msk);
+
+	otg_sx->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(otg_sx->vbus)) {
+		dev_err(dev, "failed to get vbus\n");
+		return PTR_ERR(otg_sx->vbus);
+	}
+
+	if (ssusb->dr_mode == USB_DR_MODE_HOST)
+		goto out;
+
+	/* if dual-role mode is supported */
+	otg_sx->manual_drd_enabled =
+		of_property_read_bool(node, "enable-manual-drd");
+	otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch");
+
+	/* can't disable port0 when use dual-role mode */
+	ssusb->u2p_dis_msk &= ~0x1;
+
+	if (otg_sx->role_sw_used || otg_sx->manual_drd_enabled)
+		goto out;
+
+	if (of_property_read_bool(node, "extcon")) {
+		otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
+		if (IS_ERR(otg_sx->edev)) {
+			return dev_err_probe(dev, PTR_ERR(otg_sx->edev),
+					     "couldn't get extcon device\n");
+		}
+	}
+
+out:
+	dev_info(dev, "dr_mode: %d, drd: %s\n", ssusb->dr_mode,
+		 otg_sx->manual_drd_enabled ? "manual" : "auto");
+	dev_info(dev, "u2p_dis_msk: %x, u3p_dis_msk: %x\n",
+		 ssusb->u2p_dis_msk, ssusb->u3p_dis_msk);
+
+	return 0;
+}
+
+static int mtu3_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct ssusb_mtk *ssusb;
+	int ret = -ENOMEM;
+
+	/* all elements are set to ZERO as default value */
+	ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL);
+	if (!ssusb)
+		return -ENOMEM;
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(dev, "No suitable DMA config available\n");
+		return -ENOTSUPP;
+	}
+
+	platform_set_drvdata(pdev, ssusb);
+	ssusb->dev = dev;
+
+	ret = get_ssusb_rscs(pdev, ssusb);
+	if (ret)
+		return ret;
+
+	ssusb_debugfs_create_root(ssusb);
+
+	/* enable power domain */
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 4000);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	device_init_wakeup(dev, true);
+
+	ret = ssusb_rscs_init(ssusb);
+	if (ret)
+		goto comm_init_err;
+
+	if (ssusb->wakeup_irq > 0) {
+		ret = dev_pm_set_dedicated_wake_irq_reverse(dev, ssusb->wakeup_irq);
+		if (ret) {
+			dev_err(dev, "failed to set wakeup irq %d\n", ssusb->wakeup_irq);
+			goto comm_exit;
+		}
+		dev_info(dev, "wakeup irq %d\n", ssusb->wakeup_irq);
+	}
+
+	ret = device_reset_optional(dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to reset controller\n");
+		goto comm_exit;
+	}
+
+	ssusb_ip_sw_reset(ssusb);
+	ssusb_u3_drd_check(ssusb);
+
+	if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
+		ssusb->dr_mode = USB_DR_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET))
+		ssusb->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+	/* default as host */
+	ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = ssusb_gadget_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize gadget\n");
+			goto comm_exit;
+		}
+		break;
+	case USB_DR_MODE_HOST:
+		ret = ssusb_host_init(ssusb, node);
+		if (ret) {
+			dev_err(dev, "failed to initialize host\n");
+			goto comm_exit;
+		}
+		break;
+	case USB_DR_MODE_OTG:
+		ret = ssusb_gadget_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize gadget\n");
+			goto comm_exit;
+		}
+
+		ret = ssusb_host_init(ssusb, node);
+		if (ret) {
+			dev_err(dev, "failed to initialize host\n");
+			goto gadget_exit;
+		}
+
+		ret = ssusb_otg_switch_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize switch\n");
+			goto host_exit;
+		}
+		break;
+	default:
+		dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode);
+		ret = -EINVAL;
+		goto comm_exit;
+	}
+
+	device_enable_async_suspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+host_exit:
+	ssusb_host_exit(ssusb);
+gadget_exit:
+	ssusb_gadget_exit(ssusb);
+comm_exit:
+	ssusb_rscs_exit(ssusb);
+comm_init_err:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	ssusb_debugfs_remove_root(ssusb);
+
+	return ret;
+}
+
+static int mtu3_remove(struct platform_device *pdev)
+{
+	struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ssusb_gadget_exit(ssusb);
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_exit(ssusb);
+		break;
+	case USB_DR_MODE_OTG:
+		ssusb_otg_switch_exit(ssusb);
+		ssusb_gadget_exit(ssusb);
+		ssusb_host_exit(ssusb);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssusb_rscs_exit(ssusb);
+	ssusb_debugfs_remove_root(ssusb);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	return 0;
+}
+
+static int resume_ip_and_ports(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ssusb_gadget_resume(ssusb, msg);
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_resume(ssusb, false);
+		break;
+	case USB_DR_MODE_OTG:
+		ssusb_host_resume(ssusb, !ssusb->is_host);
+		if (!ssusb->is_host)
+			ssusb_gadget_resume(ssusb, msg);
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = ssusb_gadget_suspend(ssusb, msg);
+		if (ret)
+			goto err;
+
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_suspend(ssusb);
+		break;
+	case USB_DR_MODE_OTG:
+		if (!ssusb->is_host) {
+			ret = ssusb_gadget_suspend(ssusb, msg);
+			if (ret)
+				goto err;
+		}
+		ssusb_host_suspend(ssusb);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = wait_for_ip_sleep(ssusb);
+	if (ret)
+		goto sleep_err;
+
+	ssusb_phy_power_off(ssusb);
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+	ssusb_wakeup_set(ssusb, true);
+	return 0;
+
+sleep_err:
+	resume_ip_and_ports(ssusb, msg);
+err:
+	return ret;
+}
+
+static int mtu3_resume_common(struct device *dev, pm_message_t msg)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ssusb_wakeup_set(ssusb, false);
+	ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
+	if (ret)
+		goto clks_err;
+
+	ret = ssusb_phy_power_on(ssusb);
+	if (ret)
+		goto phy_err;
+
+	return resume_ip_and_ports(ssusb, msg);
+
+phy_err:
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+clks_err:
+	return ret;
+}
+
+static int __maybe_unused mtu3_suspend(struct device *dev)
+{
+	return mtu3_suspend_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_resume(struct device *dev)
+{
+	return mtu3_resume_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_suspend(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_suspend_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_resume(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_resume_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static const struct dev_pm_ops mtu3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
+	SET_RUNTIME_PM_OPS(mtu3_runtime_suspend,
+			   mtu3_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
+
+static const struct of_device_id mtu3_of_match[] = {
+	{.compatible = "mediatek,mt8173-mtu3",},
+	{.compatible = "mediatek,mtu3",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtu3_of_match);
+
+static struct platform_driver mtu3_driver = {
+	.probe = mtu3_probe,
+	.remove = mtu3_remove,
+	.driver = {
+		.name = MTU3_DRIVER_NAME,
+		.pm = DEV_PM_OPS,
+		.of_match_table = mtu3_of_match,
+	},
+};
+module_platform_driver(mtu3_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek USB3 DRD Controller Driver");