Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 313 insertions, 0 deletions

diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
new file mode 100644
index 000000000..d04c7cc5c
--- /dev/null
+++ b/drivers/usb/serial/ipw.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IPWireless 3G UMTS TDD Modem driver (USB connected)
+ *
+ *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
+ *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * All information about the device was acquired using SnoopyPro
+ * on MSFT's O/S, and examing the MSFT drivers' debug output
+ * (insanely left _on_ in the enduser version)
+ *
+ * It was written out of frustration with the IPWireless USB modem
+ * supplied by Axity3G/Sentech South Africa not supporting
+ * Linux whatsoever.
+ *
+ * Nobody provided any proprietary information that was not already
+ * available for this device.
+ *
+ * The modem adheres to the "3GPP TS  27.007 AT command set for 3G
+ * User Equipment (UE)" standard, available from
+ * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
+ *
+ * The code was only tested the IPWireless handheld modem distributed
+ * in South Africa by Sentech.
+ *
+ * It may work for Woosh Inc in .nz too, as it appears they use the
+ * same kit.
+ *
+ * There is still some work to be done in terms of handling
+ * DCD, DTR, RTS, CTS which are currently faked.
+ * It's good enough for PPP at this point. It's based off all kinds of
+ * code found in usb/serial and usb/class
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+#include "usb-wwan.h"
+
+#define DRIVER_AUTHOR	"Roelf Diedericks"
+#define DRIVER_DESC	"IPWireless tty driver"
+
+#define IPW_TTY_MAJOR	240	/* real device node major id, experimental range */
+#define IPW_TTY_MINORS	256	/* we support 256 devices, dunno why, it'd be insane :) */
+
+#define USB_IPW_MAGIC	0x6d02	/* magic number for ipw struct */
+
+
+/* Message sizes */
+#define EVENT_BUFFER_SIZE	0xFF
+#define CHAR2INT16(c1, c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
+
+/* vendor/product pairs that are known work with this driver*/
+#define IPW_VID		0x0bc3
+#define IPW_PID		0x0001
+
+
+/* Vendor commands: */
+
+/* baud rates */
+enum {
+	ipw_sio_b256000 = 0x000e,
+	ipw_sio_b128000 = 0x001d,
+	ipw_sio_b115200 = 0x0020,
+	ipw_sio_b57600  = 0x0040,
+	ipw_sio_b56000  = 0x0042,
+	ipw_sio_b38400  = 0x0060,
+	ipw_sio_b19200  = 0x00c0,
+	ipw_sio_b14400  = 0x0100,
+	ipw_sio_b9600   = 0x0180,
+	ipw_sio_b4800   = 0x0300,
+	ipw_sio_b2400   = 0x0600,
+	ipw_sio_b1200   = 0x0c00,
+	ipw_sio_b600    = 0x1800
+};
+
+/* data bits */
+#define ipw_dtb_7		0x700
+#define ipw_dtb_8		0x810	/* ok so the define is misleading, I know, but forces 8,n,1 */
+					/* I mean, is there a point to any other setting these days? :) */
+
+/* usb control request types : */
+#define IPW_SIO_RXCTL		0x00	/* control bulk rx channel transmissions, value=1/0 (on/off) */
+#define IPW_SIO_SET_BAUD	0x01	/* set baud, value=requested ipw_sio_bxxxx */
+#define IPW_SIO_SET_LINE	0x03	/* set databits, parity. value=ipw_dtb_x */
+#define IPW_SIO_SET_PIN		0x03	/* set/clear dtr/rts value=ipw_pin_xxx */
+#define IPW_SIO_POLL		0x08	/* get serial port status byte, call with value=0 */
+#define IPW_SIO_INIT		0x11	/* initializes ? value=0 (appears as first thing todo on open) */
+#define IPW_SIO_PURGE		0x12	/* purge all transmissions?, call with value=numchar_to_purge */
+#define IPW_SIO_HANDFLOW	0x13	/* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
+#define IPW_SIO_SETCHARS	0x13	/* set the flowcontrol special chars, value=0, buf=6 bytes, */
+					/* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
+
+/* values used for request IPW_SIO_SET_PIN */
+#define IPW_PIN_SETDTR		0x101
+#define IPW_PIN_SETRTS		0x202
+#define IPW_PIN_CLRDTR		0x100
+#define IPW_PIN_CLRRTS		0x200 /* unconfirmed */
+
+/* values used for request IPW_SIO_RXCTL */
+#define IPW_RXBULK_ON		1
+#define IPW_RXBULK_OFF		0
+
+/* various 16 byte hardcoded transferbuffers used by flow control */
+#define IPW_BYTES_FLOWINIT	{ 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
+					0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define IPW_DSR			((1<<4) | (1<<5))
+#define IPW_CTS			((1<<5) | (1<<4))
+
+#define IPW_WANTS_TO_SEND	0x30
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(IPW_VID, IPW_PID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
+	u8 *buf_flow_init;
+	int result;
+
+	buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
+	if (!buf_flow_init)
+		return -ENOMEM;
+
+	/* --1: Tell the modem to initialize (we think) From sniffs this is
+	 *	always the first thing that gets sent to the modem during
+	 *	opening of the device */
+	dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_INIT,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+	if (result < 0)
+		dev_err(dev, "Init of modem failed (error = %d)\n", result);
+
+	/* reset the bulk pipes */
+	usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress));
+	usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress));
+
+	/*--2: Start reading from the device */
+	dev_dbg(dev, "%s: setting up bulk read callback\n", __func__);
+	usb_wwan_open(tty, port);
+
+	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
+	dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_ON,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+	if (result < 0)
+		dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result);
+
+	/*--4: setup the initial flowcontrol */
+	dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_HANDFLOW,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0,
+			 buf_flow_init,
+			 0x10,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "initial flowcontrol failed (error = %d)\n", result);
+
+	kfree(buf_flow_init);
+	return 0;
+}
+
+static int ipw_attach(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data;
+
+	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+	usb_set_serial_data(serial, data);
+	return 0;
+}
+
+static void ipw_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
+
+	usb_set_serial_data(serial, NULL);
+	kfree(data);
+}
+
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	int result;
+
+	dev_dbg(dev, "%s: on = %d\n", __func__, on);
+
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_SET_PIN,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "setting dtr failed (error = %d)\n", result);
+
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
+					USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "setting rts failed (error = %d)\n", result);
+}
+
+static void ipw_close(struct usb_serial_port *port)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	int result;
+
+	/*--3: purge */
+	dev_dbg(dev, "%s:sending purge\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_PURGE, USB_TYPE_VENDOR |
+			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0x03,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "purge failed (error = %d)\n", result);
+
+
+	/* send RXBULK_off (tell modem to stop transmitting bulk data on
+	   rx chan) */
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_OFF,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+
+	if (result < 0)
+		dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result);
+
+	usb_wwan_close(port);
+}
+
+static struct usb_serial_driver ipw_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ipw",
+	},
+	.description =		"IPWireless converter",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			ipw_open,
+	.close =		ipw_close,
+	.attach =		ipw_attach,
+	.release =		ipw_release,
+	.port_probe =		usb_wwan_port_probe,
+	.port_remove =		usb_wwan_port_remove,
+	.dtr_rts =		ipw_dtr_rts,
+	.write =		usb_wwan_write,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ipw_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+/* Module information */
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");