Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
new file mode 100644
index 000000000..09a972a83
--- /dev/null
+++ b/drivers/usb/serial/spcp8x5.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * spcp8x5 USB to serial adaptor driver
+ *
+ * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
+ * Copyright (C) 2006 S1 Corp.
+ *
+ * Original driver for 2.6.10 pl2303 driver by
+ *   Greg Kroah-Hartman (greg@kroah.com)
+ * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC	"SPCP8x5 USB to serial adaptor driver"
+
+#define SPCP825_QUIRK_NO_UART_STATUS	0x01
+#define SPCP825_QUIRK_NO_WORK_MODE	0x02
+
+#define SPCP8x5_007_VID		0x04FC
+#define SPCP8x5_007_PID		0x0201
+#define SPCP8x5_008_VID		0x04fc
+#define SPCP8x5_008_PID		0x0235
+#define SPCP8x5_PHILIPS_VID	0x0471
+#define SPCP8x5_PHILIPS_PID	0x081e
+#define SPCP8x5_INTERMATIC_VID	0x04FC
+#define SPCP8x5_INTERMATIC_PID	0x0204
+#define SPCP8x5_835_VID		0x04fc
+#define SPCP8x5_835_PID		0x0231
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
+	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
+	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
+	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
+	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
+	  .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
+				SPCP825_QUIRK_NO_WORK_MODE },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct spcp8x5_usb_ctrl_arg {
+	u8	type;
+	u8	cmd;
+	u8	cmd_type;
+	u16	value;
+	u16	index;
+	u16	length;
+};
+
+
+/* spcp8x5 spec register define */
+#define MCR_CONTROL_LINE_RTS		0x02
+#define MCR_CONTROL_LINE_DTR		0x01
+#define MCR_DTR				0x01
+#define MCR_RTS				0x02
+
+#define MSR_STATUS_LINE_DCD		0x80
+#define MSR_STATUS_LINE_RI		0x40
+#define MSR_STATUS_LINE_DSR		0x20
+#define MSR_STATUS_LINE_CTS		0x10
+
+/* verdor command here , we should define myself */
+#define SET_DEFAULT			0x40
+#define SET_DEFAULT_TYPE		0x20
+
+#define SET_UART_FORMAT			0x40
+#define SET_UART_FORMAT_TYPE		0x21
+#define SET_UART_FORMAT_SIZE_5		0x00
+#define SET_UART_FORMAT_SIZE_6		0x01
+#define SET_UART_FORMAT_SIZE_7		0x02
+#define SET_UART_FORMAT_SIZE_8		0x03
+#define SET_UART_FORMAT_STOP_1		0x00
+#define SET_UART_FORMAT_STOP_2		0x04
+#define SET_UART_FORMAT_PAR_NONE	0x00
+#define SET_UART_FORMAT_PAR_ODD		0x10
+#define SET_UART_FORMAT_PAR_EVEN	0x30
+#define SET_UART_FORMAT_PAR_MASK	0xD0
+#define SET_UART_FORMAT_PAR_SPACE	0x90
+
+#define GET_UART_STATUS_TYPE		0xc0
+#define GET_UART_STATUS			0x22
+#define GET_UART_STATUS_MSR		0x06
+
+#define SET_UART_STATUS			0x40
+#define SET_UART_STATUS_TYPE		0x23
+#define SET_UART_STATUS_MCR		0x0004
+#define SET_UART_STATUS_MCR_DTR		0x01
+#define SET_UART_STATUS_MCR_RTS		0x02
+#define SET_UART_STATUS_MCR_LOOP	0x10
+
+#define SET_WORKING_MODE		0x40
+#define SET_WORKING_MODE_TYPE		0x24
+#define SET_WORKING_MODE_U2C		0x00
+#define SET_WORKING_MODE_RS485		0x01
+#define SET_WORKING_MODE_PDMA		0x02
+#define SET_WORKING_MODE_SPP		0x03
+
+#define SET_FLOWCTL_CHAR		0x40
+#define SET_FLOWCTL_CHAR_TYPE		0x25
+
+#define GET_VERSION			0xc0
+#define GET_VERSION_TYPE		0x26
+
+#define SET_REGISTER			0x40
+#define SET_REGISTER_TYPE		0x27
+
+#define	GET_REGISTER			0xc0
+#define GET_REGISTER_TYPE		0x28
+
+#define SET_RAM				0x40
+#define SET_RAM_TYPE			0x31
+
+#define GET_RAM				0xc0
+#define GET_RAM_TYPE			0x32
+
+/* how come ??? */
+#define UART_STATE			0x08
+#define UART_STATE_TRANSIENT_MASK	0x75
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+struct spcp8x5_private {
+	unsigned		quirks;
+	spinlock_t		lock;
+	u8			line_control;
+};
+
+static int spcp8x5_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id);
+
+	return 0;
+}
+
+static int spcp8x5_port_probe(struct usb_serial_port *port)
+{
+	const struct usb_device_id *id = usb_get_serial_data(port->serial);
+	struct spcp8x5_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->quirks = id->driver_info;
+
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;
+
+	return 0;
+}
+
+static void spcp8x5_port_remove(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int retval;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 SET_UART_STATUS_TYPE, SET_UART_STATUS,
+				 mcr, 0x04, NULL, 0, 100);
+	if (retval != 0) {
+		dev_err(&port->dev, "failed to set control lines: %d\n",
+								retval);
+	}
+	return retval;
+}
+
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	u8 *buf;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
+			      0, GET_UART_STATUS_MSR, buf, 1, 100);
+	if (ret < 1) {
+		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
+
+	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
+	*status = *buf;
+	ret = 0;
+out:
+	kfree(buf);
+
+	return ret;
+}
+
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+								 u16 index)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
+		return;
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
+			      value, index, NULL, 0, 100);
+	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
+	if (ret < 0)
+		dev_err(&port->dev, "failed to set work mode: %d\n", ret);
+}
+
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	u8 msr;
+	int ret;
+
+	ret = spcp8x5_get_msr(port, &msr);
+	if (ret || msr & MSR_STATUS_LINE_DCD)
+		return 1;
+
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrl_line(port, control);
+}
+
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+static void spcp8x5_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned short uartdata;
+	unsigned char buf[2] = {0, 0};
+	int baud;
+	int i;
+	u8 control;
+
+	/* check that they really want us to change something */
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	/* set DTR/RTS active */
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+		priv->line_control |= MCR_DTR;
+		if (!(old_termios->c_cflag & CRTSCTS))
+			priv->line_control |= MCR_RTS;
+	}
+	if (control != priv->line_control) {
+		control = priv->line_control;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		spcp8x5_set_ctrl_line(port, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	/* Set Baud Rate */
+	baud = tty_get_baud_rate(tty);
+	switch (baud) {
+	case 300:	buf[0] = 0x00;	break;
+	case 600:	buf[0] = 0x01;	break;
+	case 1200:	buf[0] = 0x02;	break;
+	case 2400:	buf[0] = 0x03;	break;
+	case 4800:	buf[0] = 0x04;	break;
+	case 9600:	buf[0] = 0x05;	break;
+	case 19200:	buf[0] = 0x07;	break;
+	case 38400:	buf[0] = 0x09;	break;
+	case 57600:	buf[0] = 0x0a;	break;
+	case 115200:	buf[0] = 0x0b;	break;
+	case 230400:	buf[0] = 0x0c;	break;
+	case 460800:	buf[0] = 0x0d;	break;
+	case 921600:	buf[0] = 0x0e;	break;
+/*	case 1200000:	buf[0] = 0x0f;	break; */
+/*	case 2400000:	buf[0] = 0x10;	break; */
+	case 3000000:	buf[0] = 0x11;	break;
+/*	case 6000000:	buf[0] = 0x12;	break; */
+	case 0:
+	case 1000000:
+			buf[0] = 0x0b;	break;
+	default:
+		dev_err(&port->dev, "unsupported baudrate, using 9600\n");
+	}
+
+	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
+	}
+
+	/* Set Stop bit2 : 0:1bit 1:2bit */
+	buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
+				     SET_UART_FORMAT_STOP_1;
+
+	/* Set Parity bit3-4 01:Odd 11:Even */
+	if (cflag & PARENB) {
+		buf[1] |= (cflag & PARODD) ?
+		SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
+	} else {
+		buf[1] |= SET_UART_FORMAT_PAR_NONE;
+	}
+	uartdata = buf[0] | buf[1]<<8;
+
+	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
+			    uartdata, 0, NULL, 0, 100);
+	if (i < 0)
+		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+			uartdata, i);
+	dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
+
+	if (cflag & CRTSCTS) {
+		/* enable hardware flow control */
+		spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
+	}
+}
+
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	int ret;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			      0x09, 0x00,
+			      0x01, 0x00, NULL, 0x00, 100);
+	if (ret)
+		return ret;
+
+	spcp8x5_set_ctrl_line(port, priv->line_control);
+
+	if (tty)
+		spcp8x5_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int spcp8x5_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= MCR_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~MCR_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return spcp8x5_set_ctrl_line(port, control);
+}
+
+static int spcp8x5_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int mcr;
+	u8 status;
+	unsigned int result;
+
+	result = spcp8x5_get_msr(port, &status);
+	if (result)
+		return result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & MCR_DTR)			? TIOCM_DTR : 0)
+		  | ((mcr & MCR_RTS)			? TIOCM_RTS : 0)
+		  | ((status & MSR_STATUS_LINE_CTS)	? TIOCM_CTS : 0)
+		  | ((status & MSR_STATUS_LINE_DSR)	? TIOCM_DSR : 0)
+		  | ((status & MSR_STATUS_LINE_RI)	? TIOCM_RI  : 0)
+		  | ((status & MSR_STATUS_LINE_DCD)	? TIOCM_CD  : 0);
+
+	return result;
+}
+
+static struct usb_serial_driver spcp8x5_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"SPCP8x5",
+	},
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.open			= spcp8x5_open,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
+	.set_termios		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
+	.tiocmget		= spcp8x5_tiocmget,
+	.tiocmset		= spcp8x5_tiocmset,
+	.probe			= spcp8x5_probe,
+	.port_probe		= spcp8x5_port_probe,
+	.port_remove		= spcp8x5_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&spcp8x5_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");