Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 298 insertions, 0 deletions

diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
new file mode 100644
index 000000000..7e63074c9
--- /dev/null
+++ b/drivers/usb/serial/whiteheat.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB ConnectTech WhiteHEAT driver
+ *
+ *      Copyright (C) 2002
+ *          Connect Tech Inc.
+ *
+ *      Copyright (C) 1999, 2000
+ *          Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_WHITEHEAT_H
+#define __LINUX_USB_SERIAL_WHITEHEAT_H
+
+
+/* WhiteHEAT commands */
+#define WHITEHEAT_OPEN			1	/* open the port */
+#define WHITEHEAT_CLOSE			2	/* close the port */
+#define WHITEHEAT_SETUP_PORT		3	/* change port settings */
+#define WHITEHEAT_SET_RTS		4	/* turn RTS on or off */
+#define WHITEHEAT_SET_DTR		5	/* turn DTR on or off */
+#define WHITEHEAT_SET_BREAK		6	/* turn BREAK on or off */
+#define WHITEHEAT_DUMP			7	/* dump memory */
+#define WHITEHEAT_STATUS		8	/* get status */
+#define WHITEHEAT_PURGE			9	/* clear the UART fifos */
+#define WHITEHEAT_GET_DTR_RTS		10	/* get the state of DTR and RTS
+							for a port */
+#define WHITEHEAT_GET_HW_INFO		11	/* get EEPROM info and
+							hardware ID */
+#define WHITEHEAT_REPORT_TX_DONE	12	/* get the next TX done */
+#define WHITEHEAT_EVENT			13	/* unsolicited status events */
+#define WHITEHEAT_ECHO			14	/* send data to the indicated
+						   IN endpoint */
+#define WHITEHEAT_DO_TEST		15	/* perform specified test */
+#define WHITEHEAT_CMD_COMPLETE		16	/* reply for some commands */
+#define WHITEHEAT_CMD_FAILURE		17	/* reply for failed commands */
+
+
+/*
+ * Commands to the firmware
+ */
+
+
+/*
+ * WHITEHEAT_OPEN
+ * WHITEHEAT_CLOSE
+ * WHITEHEAT_STATUS
+ * WHITEHEAT_GET_DTR_RTS
+ * WHITEHEAT_REPORT_TX_DONE
+*/
+struct whiteheat_simple {
+	__u8	port;	/* port number (1 to N) */
+};
+
+
+/*
+ * WHITEHEAT_SETUP_PORT
+ */
+#define WHITEHEAT_PAR_NONE	'n'	/* no parity */
+#define WHITEHEAT_PAR_EVEN	'e'	/* even parity */
+#define WHITEHEAT_PAR_ODD	'o'	/* odd parity */
+#define WHITEHEAT_PAR_SPACE	'0'	/* space (force 0) parity */
+#define WHITEHEAT_PAR_MARK	'1'	/* mark (force 1) parity */
+
+#define WHITEHEAT_SFLOW_NONE	'n'	/* no software flow control */
+#define WHITEHEAT_SFLOW_RX	'r'	/* XOFF/ON is sent when RX
+					   fills/empties */
+#define WHITEHEAT_SFLOW_TX	't'	/* when received XOFF/ON will
+					   stop/start TX */
+#define WHITEHEAT_SFLOW_RXTX	'b'	/* both SFLOW_RX and SFLOW_TX */
+
+#define WHITEHEAT_HFLOW_NONE		0x00	/* no hardware flow control */
+#define WHITEHEAT_HFLOW_RTS_TOGGLE	0x01	/* RTS is on during transmit,
+						   off otherwise */
+#define WHITEHEAT_HFLOW_DTR		0x02	/* DTR is off/on when RX
+						   fills/empties */
+#define WHITEHEAT_HFLOW_CTS		0x08	/* when received CTS off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_DSR		0x10	/* when received DSR off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_RTS		0x80	/* RTS is off/on when RX
+						   fills/empties */
+
+struct whiteheat_port_settings {
+	__u8	port;		/* port number (1 to N) */
+	__le32	baud;		/* any value 7 - 460800, firmware calculates
+				   best fit; arrives little endian */
+	__u8	bits;		/* 5, 6, 7, or 8 */
+	__u8	stop;		/* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
+	__u8	parity;		/* see WHITEHEAT_PAR_* above */
+	__u8	sflow;		/* see WHITEHEAT_SFLOW_* above */
+	__u8	xoff;		/* XOFF byte value */
+	__u8	xon;		/* XON byte value */
+	__u8	hflow;		/* see WHITEHEAT_HFLOW_* above */
+	__u8	lloop;		/* 0/1 turns local loopback mode off/on */
+} __attribute__ ((packed));
+
+
+/*
+ * WHITEHEAT_SET_RTS
+ * WHITEHEAT_SET_DTR
+ * WHITEHEAT_SET_BREAK
+ */
+#define WHITEHEAT_RTS_OFF	0x00
+#define WHITEHEAT_RTS_ON	0x01
+#define WHITEHEAT_DTR_OFF	0x00
+#define WHITEHEAT_DTR_ON	0x01
+#define WHITEHEAT_BREAK_OFF	0x00
+#define WHITEHEAT_BREAK_ON	0x01
+
+struct whiteheat_set_rdb {
+	__u8	port;		/* port number (1 to N) */
+	__u8	state;		/* 0/1 turns signal off/on */
+};
+
+
+/*
+ * WHITEHEAT_DUMP
+ */
+#define WHITEHEAT_DUMP_MEM_DATA		'd'  /* data */
+#define WHITEHEAT_DUMP_MEM_IDATA	'i'  /* idata */
+#define WHITEHEAT_DUMP_MEM_BDATA	'b'  /* bdata */
+#define WHITEHEAT_DUMP_MEM_XDATA	'x'  /* xdata */
+
+/*
+ * Allowable address ranges (firmware checks address):
+ * Type DATA:  0x00 - 0xff
+ * Type IDATA: 0x80 - 0xff
+ * Type BDATA: 0x20 - 0x2f
+ * Type XDATA: 0x0000 - 0xffff
+ *
+ * B/I/DATA all read the local memory space
+ * XDATA reads the external memory space
+ * BDATA returns bits as bytes
+ *
+ * NOTE: 0x80 - 0xff (local space) are the Special Function Registers
+ *       of the 8051, and some have on-read side-effects.
+ */
+
+struct whiteheat_dump {
+	__u8	mem_type;	/* see WHITEHEAT_DUMP_* above */
+	__u16	addr;		/* address, see restrictions above */
+	__u16	length;		/* number of bytes to dump, max 63 bytes */
+};
+
+
+/*
+ * WHITEHEAT_PURGE
+ */
+#define WHITEHEAT_PURGE_RX	0x01	/* purge rx fifos */
+#define WHITEHEAT_PURGE_TX	0x02	/* purge tx fifos */
+
+struct whiteheat_purge {
+	__u8	port;		/* port number (1 to N) */
+	__u8	what;		/* bit pattern of what to purge */
+};
+
+
+/*
+ * WHITEHEAT_ECHO
+ */
+struct whiteheat_echo {
+	__u8	port;		/* port number (1 to N) */
+	__u8	length;		/* length of message to echo, max 61 bytes */
+	__u8	echo_data[61];	/* data to echo */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_UART_RW		0x01  /* read/write uart registers */
+#define WHITEHEAT_TEST_UART_INTR	0x02  /* uart interrupt */
+#define WHITEHEAT_TEST_SETUP_CONT	0x03  /* setup for
+						PORT_CONT/PORT_DISCONT */
+#define WHITEHEAT_TEST_PORT_CONT	0x04  /* port connect */
+#define WHITEHEAT_TEST_PORT_DISCONT	0x05  /* port disconnect */
+#define WHITEHEAT_TEST_UART_CLK_START	0x06  /* uart clock test start */
+#define WHITEHEAT_TEST_UART_CLK_STOP	0x07  /* uart clock test stop */
+#define WHITEHEAT_TEST_MODEM_FT		0x08  /* modem signals, requires a
+						loopback cable/connector */
+#define WHITEHEAT_TEST_ERASE_EEPROM	0x09  /* erase eeprom */
+#define WHITEHEAT_TEST_READ_EEPROM	0x0a  /* read eeprom */
+#define WHITEHEAT_TEST_PROGRAM_EEPROM	0x0b  /* program eeprom */
+
+struct whiteheat_test {
+	__u8	port;		/* port number (1 to n) */
+	__u8	test;		/* see WHITEHEAT_TEST_* above*/
+	__u8	info[32];	/* additional info */
+};
+
+
+/*
+ * Replies from the firmware
+ */
+
+
+/*
+ * WHITEHEAT_STATUS
+ */
+#define WHITEHEAT_EVENT_MODEM		0x01	/* modem field is valid */
+#define WHITEHEAT_EVENT_ERROR		0x02	/* error field is valid */
+#define WHITEHEAT_EVENT_FLOW		0x04	/* flow field is valid */
+#define WHITEHEAT_EVENT_CONNECT		0x08	/* connect field is valid */
+
+#define WHITEHEAT_FLOW_NONE		0x00	/* no flow control active */
+#define WHITEHEAT_FLOW_HARD_OUT		0x01	/* TX is stopped by CTS
+						  (waiting for CTS to go on) */
+#define WHITEHEAT_FLOW_HARD_IN		0x02	/* remote TX is stopped
+						  by RTS */
+#define WHITEHEAT_FLOW_SOFT_OUT		0x04	/* TX is stopped by XOFF
+						  received (waiting for XON) */
+#define WHITEHEAT_FLOW_SOFT_IN		0x08	/* remote TX is stopped by XOFF
+						  transmitted */
+#define WHITEHEAT_FLOW_TX_DONE		0x80	/* TX has completed */
+
+struct whiteheat_status_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	event;		/* indicates what the current event is,
+					see WHITEHEAT_EVENT_* above */
+	__u8	modem;		/* modem signal status (copy of uart's
+					MSR register) */
+	__u8	error;		/* line status (copy of uart's LSR register) */
+	__u8	flow;		/* flow control state, see WHITEHEAT_FLOW_*
+					above */
+	__u8	connect;	/* 0 means not connected, non-zero means
+					connected */
+};
+
+
+/*
+ * WHITEHEAT_GET_DTR_RTS
+ */
+struct whiteheat_dr_info {
+	__u8	mcr;		/* copy of uart's MCR register */
+};
+
+
+/*
+ * WHITEHEAT_GET_HW_INFO
+ */
+struct whiteheat_hw_info {
+	__u8	hw_id;		/* hardware id number, WhiteHEAT = 0 */
+	__u8	sw_major_rev;	/* major version number */
+	__u8	sw_minor_rev;	/* minor version number */
+	struct whiteheat_hw_eeprom_info {
+		__u8	b0;			/* B0 */
+		__u8	vendor_id_low;		/* vendor id (low byte) */
+		__u8	vendor_id_high;		/* vendor id (high byte) */
+		__u8	product_id_low;		/* product id (low byte) */
+		__u8	product_id_high;	/* product id (high byte) */
+		__u8	device_id_low;		/* device id (low byte) */
+		__u8	device_id_high;		/* device id (high byte) */
+		__u8	not_used_1;
+		__u8	serial_number_0;	/* serial number (low byte) */
+		__u8	serial_number_1;	/* serial number */
+		__u8	serial_number_2;	/* serial number */
+		__u8	serial_number_3;	/* serial number (high byte) */
+		__u8	not_used_2;
+		__u8	not_used_3;
+		__u8	checksum_low;		/* checksum (low byte) */
+		__u8	checksum_high;		/* checksum (high byte */
+	} hw_eeprom_info;	/* EEPROM contents */
+};
+
+
+/*
+ * WHITEHEAT_EVENT
+ */
+struct whiteheat_event_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	event;		/* see whiteheat_status_info.event */
+	__u8	info;		/* see whiteheat_status_info.modem, .error,
+					.flow, .connect */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_FAIL	0x00  /* test failed */
+#define WHITEHEAT_TEST_UNKNOWN	0x01  /* unknown test requested */
+#define WHITEHEAT_TEST_PASS	0xff  /* test passed */
+
+struct whiteheat_test_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	test;		/* indicates which test this is a response for,
+				   see WHITEHEAT_DO_TEST above */
+	__u8	status;		/* see WHITEHEAT_TEST_* above */
+	__u8	results[32];	/* test-dependent results */
+};
+
+
+#endif