Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 357 insertions, 0 deletions

diff --git a/drivers/video/aperture.c b/drivers/video/aperture.c
new file mode 100644
index 000000000..41e77de1e
--- /dev/null
+++ b/drivers/video/aperture.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: MIT
+
+#include <linux/aperture.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfb.h>
+#include <linux/types.h>
+#include <linux/vgaarb.h>
+
+#include <video/vga.h>
+
+/**
+ * DOC: overview
+ *
+ * A graphics device might be supported by different drivers, but only one
+ * driver can be active at any given time. Many systems load a generic
+ * graphics drivers, such as EFI-GOP or VESA, early during the boot process.
+ * During later boot stages, they replace the generic driver with a dedicated,
+ * hardware-specific driver. To take over the device the dedicated driver
+ * first has to remove the generic driver. Aperture functions manage
+ * ownership of framebuffer memory and hand-over between drivers.
+ *
+ * Graphics drivers should call aperture_remove_conflicting_devices()
+ * at the top of their probe function. The function removes any generic
+ * driver that is currently associated with the given framebuffer memory.
+ * An example for a graphics device on the platform bus is shown below.
+ *
+ * .. code-block:: c
+ *
+ *	static int example_probe(struct platform_device *pdev)
+ *	{
+ *		struct resource *mem;
+ *		resource_size_t base, size;
+ *		int ret;
+ *
+ *		mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ *		if (!mem)
+ *			return -ENODEV;
+ *		base = mem->start;
+ *		size = resource_size(mem);
+ *
+ *		ret = aperture_remove_conflicting_devices(base, size, false, "example");
+ *		if (ret)
+ *			return ret;
+ *
+ *		// Initialize the hardware
+ *		...
+ *
+ *		return 0;
+ *	}
+ *
+ *	static const struct platform_driver example_driver = {
+ *		.probe = example_probe,
+ *		...
+ *	};
+ *
+ * The given example reads the platform device's I/O-memory range from the
+ * device instance. An active framebuffer will be located within this range.
+ * The call to aperture_remove_conflicting_devices() releases drivers that
+ * have previously claimed ownership of the range and are currently driving
+ * output on the framebuffer. If successful, the new driver can take over
+ * the device.
+ *
+ * While the given example uses a platform device, the aperture helpers work
+ * with every bus that has an addressable framebuffer. In the case of PCI,
+ * device drivers can also call aperture_remove_conflicting_pci_devices() and
+ * let the function detect the apertures automatically. Device drivers without
+ * knowledge of the framebuffer's location can call
+ * aperture_remove_all_conflicting_devices(), which removes all known devices.
+ *
+ * Drivers that are susceptible to being removed by other drivers, such as
+ * generic EFI or VESA drivers, have to register themselves as owners of their
+ * framebuffer apertures. Ownership of the framebuffer memory is achieved
+ * by calling devm_aperture_acquire_for_platform_device(). If successful, the
+ * driveris the owner of the framebuffer range. The function fails if the
+ * framebuffer is already owned by another driver. See below for an example.
+ *
+ * .. code-block:: c
+ *
+ *	static int generic_probe(struct platform_device *pdev)
+ *	{
+ *		struct resource *mem;
+ *		resource_size_t base, size;
+ *
+ *		mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ *		if (!mem)
+ *			return -ENODEV;
+ *		base = mem->start;
+ *		size = resource_size(mem);
+ *
+ *		ret = devm_aperture_acquire_for_platform_device(pdev, base, size);
+ *		if (ret)
+ *			return ret;
+ *
+ *		// Initialize the hardware
+ *		...
+ *
+ *		return 0;
+ *	}
+ *
+ *	static int generic_remove(struct platform_device *)
+ *	{
+ *		// Hot-unplug the device
+ *		...
+ *
+ *		return 0;
+ *	}
+ *
+ *	static const struct platform_driver generic_driver = {
+ *		.probe = generic_probe,
+ *		.remove = generic_remove,
+ *		...
+ *	};
+ *
+ * The similar to the previous example, the generic driver claims ownership
+ * of the framebuffer memory from its probe function. This will fail if the
+ * memory range, or parts of it, is already owned by another driver.
+ *
+ * If successful, the generic driver is now subject to forced removal by
+ * another driver. This only works for platform drivers that support hot
+ * unplugging. When a driver calls aperture_remove_conflicting_devices()
+ * et al for the registered framebuffer range, the aperture helpers call
+ * platform_device_unregister() and the generic driver unloads itself. The
+ * generic driver also has to provide a remove function to make this work.
+ * Once hot unplugged fro mhardware, it may not access the device's
+ * registers, framebuffer memory, ROM, etc afterwards.
+ */
+
+struct aperture_range {
+	struct device *dev;
+	resource_size_t base;
+	resource_size_t size;
+	struct list_head lh;
+	void (*detach)(struct device *dev);
+};
+
+static LIST_HEAD(apertures);
+static DEFINE_MUTEX(apertures_lock);
+
+static bool overlap(resource_size_t base1, resource_size_t end1,
+		    resource_size_t base2, resource_size_t end2)
+{
+	return (base1 < end2) && (end1 > base2);
+}
+
+static void devm_aperture_acquire_release(void *data)
+{
+	struct aperture_range *ap = data;
+	bool detached = !ap->dev;
+
+	if (detached)
+		return;
+
+	mutex_lock(&apertures_lock);
+	list_del(&ap->lh);
+	mutex_unlock(&apertures_lock);
+}
+
+static int devm_aperture_acquire(struct device *dev,
+				 resource_size_t base, resource_size_t size,
+				 void (*detach)(struct device *))
+{
+	size_t end = base + size;
+	struct list_head *pos;
+	struct aperture_range *ap;
+
+	mutex_lock(&apertures_lock);
+
+	list_for_each(pos, &apertures) {
+		ap = container_of(pos, struct aperture_range, lh);
+		if (overlap(base, end, ap->base, ap->base + ap->size)) {
+			mutex_unlock(&apertures_lock);
+			return -EBUSY;
+		}
+	}
+
+	ap = devm_kzalloc(dev, sizeof(*ap), GFP_KERNEL);
+	if (!ap) {
+		mutex_unlock(&apertures_lock);
+		return -ENOMEM;
+	}
+
+	ap->dev = dev;
+	ap->base = base;
+	ap->size = size;
+	ap->detach = detach;
+	INIT_LIST_HEAD(&ap->lh);
+
+	list_add(&ap->lh, &apertures);
+
+	mutex_unlock(&apertures_lock);
+
+	return devm_add_action_or_reset(dev, devm_aperture_acquire_release, ap);
+}
+
+static void aperture_detach_platform_device(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	/*
+	 * Remove the device from the device hierarchy. This is the right thing
+	 * to do for firmware-based DRM drivers, such as EFI, VESA or VGA. After
+	 * the new driver takes over the hardware, the firmware device's state
+	 * will be lost.
+	 *
+	 * For non-platform devices, a new callback would be required.
+	 *
+	 * If the aperture helpers ever need to handle native drivers, this call
+	 * would only have to unplug the DRM device, so that the hardware device
+	 * stays around after detachment.
+	 */
+	platform_device_unregister(pdev);
+}
+
+/**
+ * devm_aperture_acquire_for_platform_device - Acquires ownership of an aperture
+ *                                             on behalf of a platform device.
+ * @pdev:	the platform device to own the aperture
+ * @base:	the aperture's byte offset in physical memory
+ * @size:	the aperture size in bytes
+ *
+ * Installs the given device as the new owner of the aperture. The function
+ * expects the aperture to be provided by a platform device. If another
+ * driver takes over ownership of the aperture, aperture helpers will then
+ * unregister the platform device automatically. All acquired apertures are
+ * released automatically when the underlying device goes away.
+ *
+ * The function fails if the aperture, or parts of it, is currently
+ * owned by another device. To evict current owners, callers should use
+ * remove_conflicting_devices() et al. before calling this function.
+ *
+ * Returns:
+ * 0 on success, or a negative errno value otherwise.
+ */
+int devm_aperture_acquire_for_platform_device(struct platform_device *pdev,
+					      resource_size_t base,
+					      resource_size_t size)
+{
+	return devm_aperture_acquire(&pdev->dev, base, size, aperture_detach_platform_device);
+}
+EXPORT_SYMBOL(devm_aperture_acquire_for_platform_device);
+
+static void aperture_detach_devices(resource_size_t base, resource_size_t size)
+{
+	resource_size_t end = base + size;
+	struct list_head *pos, *n;
+
+	mutex_lock(&apertures_lock);
+
+	list_for_each_safe(pos, n, &apertures) {
+		struct aperture_range *ap = container_of(pos, struct aperture_range, lh);
+		struct device *dev = ap->dev;
+
+		if (WARN_ON_ONCE(!dev))
+			continue;
+
+		if (!overlap(base, end, ap->base, ap->base + ap->size))
+			continue;
+
+		ap->dev = NULL; /* detach from device */
+		list_del(&ap->lh);
+
+		ap->detach(dev);
+	}
+
+	mutex_unlock(&apertures_lock);
+}
+
+/**
+ * aperture_remove_conflicting_devices - remove devices in the given range
+ * @base: the aperture's base address in physical memory
+ * @size: aperture size in bytes
+ * @primary: also kick vga16fb if present; only relevant for VGA devices
+ * @name: a descriptive name of the requesting driver
+ *
+ * This function removes devices that own apertures within @base and @size.
+ *
+ * Returns:
+ * 0 on success, or a negative errno code otherwise
+ */
+int aperture_remove_conflicting_devices(resource_size_t base, resource_size_t size,
+					bool primary, const char *name)
+{
+	/*
+	 * If a driver asked to unregister a platform device registered by
+	 * sysfb, then can be assumed that this is a driver for a display
+	 * that is set up by the system firmware and has a generic driver.
+	 *
+	 * Drivers for devices that don't have a generic driver will never
+	 * ask for this, so let's assume that a real driver for the display
+	 * was already probed and prevent sysfb to register devices later.
+	 */
+	sysfb_disable();
+
+	aperture_detach_devices(base, size);
+
+	/*
+	 * If this is the primary adapter, there could be a VGA device
+	 * that consumes the VGA framebuffer I/O range. Remove this device
+	 * as well.
+	 */
+	if (primary)
+		aperture_detach_devices(VGA_FB_PHYS_BASE, VGA_FB_PHYS_SIZE);
+
+	return 0;
+}
+EXPORT_SYMBOL(aperture_remove_conflicting_devices);
+
+/**
+ * aperture_remove_conflicting_pci_devices - remove existing framebuffers for PCI devices
+ * @pdev: PCI device
+ * @name: a descriptive name of the requesting driver
+ *
+ * This function removes devices that own apertures within any of @pdev's
+ * memory bars. The function assumes that PCI device with shadowed ROM
+ * drives a primary display and therefore kicks out vga16fb as well.
+ *
+ * Returns:
+ * 0 on success, or a negative errno code otherwise
+ */
+int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const char *name)
+{
+	bool primary = false;
+	resource_size_t base, size;
+	int bar, ret;
+
+#ifdef CONFIG_X86
+	primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; ++bar) {
+		if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
+			continue;
+
+		base = pci_resource_start(pdev, bar);
+		size = pci_resource_len(pdev, bar);
+		ret = aperture_remove_conflicting_devices(base, size, primary, name);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * WARNING: Apparently we must kick fbdev drivers before vgacon,
+	 * otherwise the vga fbdev driver falls over.
+	 */
+	ret = vga_remove_vgacon(pdev);
+	if (ret)
+		return ret;
+
+	return 0;
+
+}
+EXPORT_SYMBOL(aperture_remove_conflicting_pci_devices);