Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 263 insertions, 0 deletions

diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c
new file mode 100644
index 000000000..bfc1913e8
--- /dev/null
+++ b/drivers/video/backlight/vgg2432a4.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* drivers/video/backlight/vgg2432a4.c
+ *
+ * VGG2432A4 (ILI9320) LCD controller driver.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+
+#include <linux/spi/spi.h>
+
+#include <video/ili9320.h>
+
+#include "ili9320.h"
+
+/* Device initialisation sequences */
+
+static const struct ili9320_reg vgg_init1[] = {
+	{
+		.address = ILI9320_POWER1,
+		.value	 = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0),
+	}, {
+		.address = ILI9320_POWER2,
+		.value	 = (ILI9320_POWER2_VC(7) |
+			    ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)),
+	}, {
+		.address = ILI9320_POWER3,
+		.value	 = ILI9320_POWER3_VRH(0),
+	}, {
+		.address = ILI9320_POWER4,
+		.value	 = ILI9320_POWER4_VREOUT(0),
+	},
+};
+
+static const struct ili9320_reg vgg_init2[] = {
+	{
+		.address = ILI9320_POWER1,
+		.value   = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE |
+			    ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP),
+	}, {
+		.address = ILI9320_POWER2,
+		.value   = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3),
+	}
+};
+
+static const struct ili9320_reg vgg_gamma[] = {
+	{
+		.address = ILI9320_GAMMA1,
+		.value	 = 0x0000,
+	}, {
+		.address = ILI9320_GAMMA2,
+		.value   = 0x0505,
+	}, {
+		.address = ILI9320_GAMMA3,
+		.value	 = 0x0004,
+	}, {
+		.address = ILI9320_GAMMA4,
+		.value	 = 0x0006,
+	}, {
+		.address = ILI9320_GAMMA5,
+		.value	 = 0x0707,
+	}, {
+		.address = ILI9320_GAMMA6,
+		.value	 = 0x0105,
+	}, {
+		.address = ILI9320_GAMMA7,
+		.value	 = 0x0002,
+	}, {
+		.address = ILI9320_GAMMA8,
+		.value	 = 0x0707,
+	}, {
+		.address = ILI9320_GAMMA9,
+		.value	 = 0x0704,
+	}, {
+		.address = ILI9320_GAMMA10,
+		.value	 = 0x807,
+	}
+
+};
+
+static const struct ili9320_reg vgg_init0[] = {
+	[0]	= {
+		/* set direction and scan mode gate */
+		.address = ILI9320_DRIVER,
+		.value	 = ILI9320_DRIVER_SS,
+	}, {
+		.address = ILI9320_DRIVEWAVE,
+		.value	 = (ILI9320_DRIVEWAVE_MUSTSET |
+			    ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC),
+	}, {
+		.address = ILI9320_ENTRYMODE,
+		.value	 = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+	}, {
+		.address = ILI9320_RESIZING,
+		.value	 = 0x0,
+	},
+};
+
+
+static int vgg2432a4_lcd_init(struct ili9320 *lcd,
+			      struct ili9320_platdata *cfg)
+{
+	unsigned int addr;
+	int ret;
+
+	/* Set VCore before anything else (VGG243237-6UFLWA) */
+	ret = ili9320_write(lcd, 0x00e5, 0x8000);
+	if (ret)
+		goto err_initial;
+
+	/* Start the oscillator up before we can do anything else. */
+	ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC);
+	if (ret)
+		goto err_initial;
+
+	/* must wait at-lesat 10ms after starting */
+	mdelay(15);
+
+	ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0));
+	if (ret != 0)
+		goto err_initial;
+
+	ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2);
+	ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3);
+	ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4);
+
+	ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1);
+	ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0);
+	ili9320_write(lcd, ILI9320_RGB_IF2, cfg->rgb_if2);
+
+	ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1));
+	if (ret != 0)
+		goto err_vgg;
+
+	mdelay(300);
+
+	ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2));
+	if (ret != 0)
+		goto err_vgg2;
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_POWER3, 0x13c);
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_POWER4, 0x1c00);
+	ili9320_write(lcd, ILI9320_POWER7, 0x000e);
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00);
+	ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00);
+
+	ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma));
+	if (ret != 0)
+		goto err_vgg3;
+
+	ili9320_write(lcd, ILI9320_HORIZ_START, 0x0);
+	ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1);
+	ili9320_write(lcd, ILI9320_VERT_START, 0x0);
+	ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1);
+
+	ili9320_write(lcd, ILI9320_DRIVER2,
+		      ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D));
+
+	ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1);
+	ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00);
+
+	for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END;
+	     addr++) {
+		ili9320_write(lcd, addr, 0x0);
+	}
+
+	ili9320_write(lcd, ILI9320_INTERFACE1, 0x10);
+	ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2);
+	ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3);
+	ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4);
+	ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5);
+	ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6);
+
+	lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE |
+			 ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE |
+			 0x40);
+
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+
+ err_vgg3:
+ err_vgg2:
+ err_vgg:
+ err_initial:
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vgg2432a4_suspend(struct device *dev)
+{
+	return ili9320_suspend(dev_get_drvdata(dev));
+}
+static int vgg2432a4_resume(struct device *dev)
+{
+	return ili9320_resume(dev_get_drvdata(dev));
+}
+#endif
+
+static struct ili9320_client vgg2432a4_client = {
+	.name	= "VGG2432A4",
+	.init	= vgg2432a4_lcd_init,
+};
+
+/* Device probe */
+
+static int vgg2432a4_probe(struct spi_device *spi)
+{
+	int ret;
+
+	ret = ili9320_probe_spi(spi, &vgg2432a4_client);
+	if (ret != 0) {
+		dev_err(&spi->dev, "failed to initialise ili9320\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void vgg2432a4_remove(struct spi_device *spi)
+{
+	ili9320_remove(spi_get_drvdata(spi));
+}
+
+static void vgg2432a4_shutdown(struct spi_device *spi)
+{
+	ili9320_shutdown(spi_get_drvdata(spi));
+}
+
+static SIMPLE_DEV_PM_OPS(vgg2432a4_pm_ops, vgg2432a4_suspend, vgg2432a4_resume);
+
+static struct spi_driver vgg2432a4_driver = {
+	.driver = {
+		.name		= "VGG2432A4",
+		.pm		= &vgg2432a4_pm_ops,
+	},
+	.probe		= vgg2432a4_probe,
+	.remove		= vgg2432a4_remove,
+	.shutdown	= vgg2432a4_shutdown,
+};
+
+module_spi_driver(vgg2432a4_driver);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_DESCRIPTION("VGG2432A4 LCD Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:VGG2432A4");