Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 615 insertions, 0 deletions

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
new file mode 100644
index 000000000..1eaa35c27
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TPO TD043MTEA1 Panel driver
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <video/omapfb_dss.h>
+
+#define TPO_R02_MODE(x)		((x) & 7)
+#define TPO_R02_MODE_800x480	7
+#define TPO_R02_NCLK_RISING	BIT(3)
+#define TPO_R02_HSYNC_HIGH	BIT(4)
+#define TPO_R02_VSYNC_HIGH	BIT(5)
+
+#define TPO_R03_NSTANDBY	BIT(0)
+#define TPO_R03_EN_CP_CLK	BIT(1)
+#define TPO_R03_EN_VGL_PUMP	BIT(2)
+#define TPO_R03_EN_PWM		BIT(3)
+#define TPO_R03_DRIVING_CAP_100	BIT(4)
+#define TPO_R03_EN_PRE_CHARGE	BIT(6)
+#define TPO_R03_SOFTWARE_CTL	BIT(7)
+
+#define TPO_R04_NFLIP_H		BIT(0)
+#define TPO_R04_NFLIP_V		BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
+#define TPO_R04_VGL_FREQ_1H	BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
+			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+			TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
+};
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	struct spi_device *spi;
+	struct regulator *vcc_reg;
+	struct gpio_desc *reset_gpio;
+	u16 gamma[12];
+	u32 mode;
+	u32 hmirror:1;
+	u32 vmirror:1;
+	u32 powered_on:1;
+	u32 spi_suspended:1;
+	u32 power_on_resume:1;
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+
+	.pixelclock	= 36000000,
+
+	.hsw		= 1,
+	.hfp		= 68,
+	.hbp		= 214,
+
+	.vsw		= 1,
+	.vfp		= 39,
+	.vbp		= 34,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+	struct spi_message	m;
+	struct spi_transfer	xfer;
+	u16			w;
+	int			r;
+
+	spi_message_init(&m);
+
+	memset(&xfer, 0, sizeof(xfer));
+
+	w = ((u16)addr << 10) | (1 << 8) | data;
+	xfer.tx_buf = &w;
+	xfer.bits_per_word = 16;
+	xfer.len = 2;
+	spi_message_add_tail(&xfer, &m);
+
+	r = spi_sync(spi, &m);
+	if (r < 0)
+		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+	return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+	u8 i, val;
+
+	/* gamma bits [9:8] */
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x11, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x12, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x13, val);
+
+	/* gamma bits [7:0] */
+	for (val = i = 0; i < 12; i++)
+		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
+		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+	if (h)
+		reg4 &= ~TPO_R04_NFLIP_H;
+	if (v)
+		reg4 &= ~TPO_R04_NFLIP_V;
+
+	return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	ddata->hmirror = enable;
+	return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	return ddata->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", ddata->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int val;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	val = !!val;
+
+	ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
+	if (ret < 0)
+		return ret;
+
+	ddata->vmirror = val;
+
+	return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", ddata->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	long val;
+	int ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret != 0 || val & ~7)
+		return -EINVAL;
+
+	ddata->mode = val;
+
+	val |= TPO_R02_NCLK_RISING;
+	tpo_td043_write(ddata->spi, 2, val);
+
+	return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+				ddata->gamma[i]);
+		if (ret < 0)
+			return ret;
+		len += ret;
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	unsigned int g[12];
+	int ret;
+	int i;
+
+	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+	if (ret != 12)
+		return -EINVAL;
+
+	for (i = 0; i < 12; i++)
+		ddata->gamma[i] = g[i];
+
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+		tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+	&dev_attr_vmirror.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_gamma.attr,
+	NULL,
+};
+
+static const struct attribute_group tpo_td043_attr_group = {
+	.attrs = tpo_td043_attrs,
+};
+
+static int tpo_td043_power_on(struct panel_drv_data *ddata)
+{
+	int r;
+
+	if (ddata->powered_on)
+		return 0;
+
+	r = regulator_enable(ddata->vcc_reg);
+	if (r != 0)
+		return r;
+
+	/* wait for panel to stabilize */
+	msleep(160);
+
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
+
+	tpo_td043_write(ddata->spi, 2,
+			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
+	tpo_td043_write(ddata->spi, 0x20, 0xf0);
+	tpo_td043_write(ddata->spi, 0x21, 0xf0);
+	tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	ddata->powered_on = 1;
+	return 0;
+}
+
+static void tpo_td043_power_off(struct panel_drv_data *ddata)
+{
+	if (!ddata->powered_on)
+		return;
+
+	tpo_td043_write(ddata->spi, 3,
+			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
+
+	/* wait for at least 2 vsyncs before cutting off power */
+	msleep(50);
+
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
+
+	regulator_disable(ddata->vcc_reg);
+
+	ddata->powered_on = 0;
+}
+
+static int tpo_td043_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	return in->ops.dpi->connect(in, dssdev);
+}
+
+static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	/*
+	 * If we are resuming from system suspend, SPI clocks might not be
+	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
+	 */
+	if (!ddata->spi_suspended) {
+		r = tpo_td043_power_on(ddata);
+		if (r) {
+			in->ops.dpi->disable(in);
+			return r;
+		}
+	}
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dpi->disable(in);
+
+	if (!ddata->spi_suspended)
+		tpo_td043_power_off(ddata);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver tpo_td043_ops = {
+	.connect	= tpo_td043_connect,
+	.disconnect	= tpo_td043_disconnect,
+
+	.enable		= tpo_td043_enable,
+	.disable	= tpo_td043_disable,
+
+	.set_timings	= tpo_td043_set_timings,
+	.get_timings	= tpo_td043_get_timings,
+	.check_timings	= tpo_td043_check_timings,
+
+	.set_mirror	= tpo_td043_set_hmirror,
+	.get_mirror	= tpo_td043_get_hmirror,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int tpo_td043_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	if (!spi->dev.of_node)
+		return -ENODEV;
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_0;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
+		return r;
+	}
+
+	ddata->mode = TPO_R02_MODE_800x480;
+	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
+
+	ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(ddata->vcc_reg)) {
+		r = dev_err_probe(&spi->dev, r, "failed to get LCD VCC regulator\n");
+		goto err_regulator;
+	}
+
+	ddata->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&spi->dev, "couldn't request reset GPIO\n");
+		goto err_gpio_req;
+	}
+
+	gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
+	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
+	if (r) {
+		dev_err(&spi->dev, "failed to create sysfs files\n");
+		goto err_sysfs;
+	}
+
+	ddata->videomode = tpo_td043_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &tpo_td043_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+err_sysfs:
+err_gpio_req:
+err_regulator:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static void tpo_td043_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	tpo_td043_disable(dssdev);
+	tpo_td043_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpo_td043_spi_suspend(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
+
+	ddata->power_on_resume = ddata->powered_on;
+	tpo_td043_power_off(ddata);
+	ddata->spi_suspended = 1;
+
+	return 0;
+}
+
+static int tpo_td043_spi_resume(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "tpo_td043_spi_resume\n");
+
+	if (ddata->power_on_resume) {
+		ret = tpo_td043_power_on(ddata);
+		if (ret)
+			return ret;
+	}
+	ddata->spi_suspended = 0;
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
+	tpo_td043_spi_suspend, tpo_td043_spi_resume);
+
+static const struct of_device_id tpo_td043_of_match[] = {
+	{ .compatible = "omapdss,tpo,td043mtea1", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
+
+static struct spi_driver tpo_td043_spi_driver = {
+	.driver = {
+		.name	= "panel-tpo-td043mtea1",
+		.pm	= &tpo_td043_spi_pm,
+		.of_match_table = tpo_td043_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe	= tpo_td043_probe,
+	.remove	= tpo_td043_remove,
+};
+
+module_spi_driver(tpo_td043_spi_driver);
+
+MODULE_ALIAS("spi:tpo,td043mtea1");
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");