Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 231 insertions, 0 deletions

diff --git a/drivers/watchdog/diag288_wdt.c b/drivers/watchdog/diag288_wdt.c
new file mode 100644
index 000000000..4631d0a38
--- /dev/null
+++ b/drivers/watchdog/diag288_wdt.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Watchdog driver for z/VM and LPAR using the diag 288 interface.
+ *
+ * Under z/VM, expiration of the watchdog will send a "system restart" command
+ * to CP.
+ *
+ * The command can be altered using the module parameter "cmd". This is
+ * not recommended because it's only supported on z/VM but not whith LPAR.
+ *
+ * On LPAR, the watchdog will always trigger a system restart. the module
+ * paramter cmd is meaningless here.
+ *
+ *
+ * Copyright IBM Corp. 2004, 2013
+ * Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	      Philipp Hachtmann (phacht@de.ibm.com)
+ *
+ */
+
+#define KMSG_COMPONENT "diag288_wdt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+#include <asm/ebcdic.h>
+#include <asm/diag.h>
+#include <linux/io.h>
+
+#define MAX_CMDLEN 240
+#define DEFAULT_CMD "SYSTEM RESTART"
+
+#define MIN_INTERVAL 15     /* Minimal time supported by diag88 */
+#define MAX_INTERVAL 3600   /* One hour should be enough - pure estimation */
+
+#define WDT_DEFAULT_TIMEOUT 30
+
+/* Function codes - init, change, cancel */
+#define WDT_FUNC_INIT 0
+#define WDT_FUNC_CHANGE 1
+#define WDT_FUNC_CANCEL 2
+#define WDT_FUNC_CONCEAL 0x80000000
+
+/* Action codes for LPAR watchdog */
+#define LPARWDT_RESTART 0
+
+static char wdt_cmd[MAX_CMDLEN] = DEFAULT_CMD;
+static bool conceal_on;
+static bool nowayout_info = WATCHDOG_NOWAYOUT;
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
+MODULE_AUTHOR("Philipp Hachtmann <phacht@de.ibm.com>");
+
+MODULE_DESCRIPTION("System z diag288  Watchdog Timer");
+
+module_param_string(cmd, wdt_cmd, MAX_CMDLEN, 0644);
+MODULE_PARM_DESC(cmd, "CP command that is run when the watchdog triggers (z/VM only)");
+
+module_param_named(conceal, conceal_on, bool, 0644);
+MODULE_PARM_DESC(conceal, "Enable the CONCEAL CP option while the watchdog is active (z/VM only)");
+
+module_param_named(nowayout, nowayout_info, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default = CONFIG_WATCHDOG_NOWAYOUT)");
+
+MODULE_ALIAS("vmwatchdog");
+
+static char *cmd_buf;
+
+static int diag288(unsigned int func, unsigned int timeout,
+		   unsigned long action, unsigned int len)
+{
+	union register_pair r1 = { .even = func, .odd = timeout, };
+	union register_pair r3 = { .even = action, .odd = len, };
+	int err;
+
+	diag_stat_inc(DIAG_STAT_X288);
+
+	err = -EINVAL;
+	asm volatile(
+		"	diag	%[r1],%[r3],0x288\n"
+		"0:	la	%[err],0\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: [err] "+d" (err)
+		: [r1] "d" (r1.pair), [r3] "d" (r3.pair)
+		: "cc", "memory");
+	return err;
+}
+
+static int diag288_str(unsigned int func, unsigned int timeout, char *cmd)
+{
+	ssize_t len;
+
+	len = strscpy(cmd_buf, cmd, MAX_CMDLEN);
+	if (len < 0)
+		return len;
+	ASCEBC(cmd_buf, MAX_CMDLEN);
+	EBC_TOUPPER(cmd_buf, MAX_CMDLEN);
+
+	return diag288(func, timeout, virt_to_phys(cmd_buf), len);
+}
+
+static int wdt_start(struct watchdog_device *dev)
+{
+	int ret;
+	unsigned int func;
+
+	if (MACHINE_IS_VM) {
+		func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
+			: WDT_FUNC_INIT;
+		ret = diag288_str(func, dev->timeout, wdt_cmd);
+		WARN_ON(ret != 0);
+	} else {
+		ret = diag288(WDT_FUNC_INIT, dev->timeout, LPARWDT_RESTART, 0);
+	}
+
+	if (ret) {
+		pr_err("The watchdog cannot be activated\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int wdt_stop(struct watchdog_device *dev)
+{
+	return diag288(WDT_FUNC_CANCEL, 0, 0, 0);
+}
+
+static int wdt_ping(struct watchdog_device *dev)
+{
+	int ret;
+	unsigned int func;
+
+	if (MACHINE_IS_VM) {
+		/*
+		 * It seems to be ok to z/VM to use the init function to
+		 * retrigger the watchdog. On LPAR WDT_FUNC_CHANGE must
+		 * be used when the watchdog is running.
+		 */
+		func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
+			: WDT_FUNC_INIT;
+
+		ret = diag288_str(func, dev->timeout, wdt_cmd);
+		WARN_ON(ret != 0);
+	} else {
+		ret = diag288(WDT_FUNC_CHANGE, dev->timeout, 0, 0);
+	}
+
+	if (ret)
+		pr_err("The watchdog timer cannot be started or reset\n");
+	return ret;
+}
+
+static int wdt_set_timeout(struct watchdog_device * dev, unsigned int new_to)
+{
+	dev->timeout = new_to;
+	return wdt_ping(dev);
+}
+
+static const struct watchdog_ops wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.ping = wdt_ping,
+	.set_timeout = wdt_set_timeout,
+};
+
+static const struct watchdog_info wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.firmware_version = 0,
+	.identity = "z Watchdog",
+};
+
+static struct watchdog_device wdt_dev = {
+	.parent = NULL,
+	.info = &wdt_info,
+	.ops = &wdt_ops,
+	.bootstatus = 0,
+	.timeout = WDT_DEFAULT_TIMEOUT,
+	.min_timeout = MIN_INTERVAL,
+	.max_timeout = MAX_INTERVAL,
+};
+
+static int __init diag288_init(void)
+{
+	int ret;
+
+	watchdog_set_nowayout(&wdt_dev, nowayout_info);
+
+	if (MACHINE_IS_VM) {
+		cmd_buf = kmalloc(MAX_CMDLEN, GFP_KERNEL);
+		if (!cmd_buf) {
+			pr_err("The watchdog cannot be initialized\n");
+			return -ENOMEM;
+		}
+
+		ret = diag288_str(WDT_FUNC_INIT, MIN_INTERVAL, "BEGIN");
+		if (ret != 0) {
+			pr_err("The watchdog cannot be initialized\n");
+			kfree(cmd_buf);
+			return -EINVAL;
+		}
+	} else {
+		if (diag288(WDT_FUNC_INIT, WDT_DEFAULT_TIMEOUT,
+			    LPARWDT_RESTART, 0)) {
+			pr_err("The watchdog cannot be initialized\n");
+			return -EINVAL;
+		}
+	}
+
+	if (diag288(WDT_FUNC_CANCEL, 0, 0, 0)) {
+		pr_err("The watchdog cannot be deactivated\n");
+		return -EINVAL;
+	}
+
+	return watchdog_register_device(&wdt_dev);
+}
+
+static void __exit diag288_exit(void)
+{
+	watchdog_unregister_device(&wdt_dev);
+	kfree(cmd_buf);
+}
+
+module_init(diag288_init);
+module_exit(diag288_exit);