Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 255 insertions, 0 deletions

diff --git a/drivers/watchdog/ni903x_wdt.c b/drivers/watchdog/ni903x_wdt.c
new file mode 100644
index 000000000..045bb72d9
--- /dev/null
+++ b/drivers/watchdog/ni903x_wdt.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 National Instruments Corp.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+#define NIWD_CONTROL	0x01
+#define NIWD_COUNTER2	0x02
+#define NIWD_COUNTER1	0x03
+#define NIWD_COUNTER0	0x04
+#define NIWD_SEED2	0x05
+#define NIWD_SEED1	0x06
+#define NIWD_SEED0	0x07
+
+#define NIWD_IO_SIZE	0x08
+
+#define NIWD_CONTROL_MODE		0x80
+#define NIWD_CONTROL_PROC_RESET		0x20
+#define NIWD_CONTROL_PET		0x10
+#define NIWD_CONTROL_RUNNING		0x08
+#define NIWD_CONTROL_CAPTURECOUNTER	0x04
+#define NIWD_CONTROL_RESET		0x02
+#define NIWD_CONTROL_ALARM		0x01
+
+#define NIWD_PERIOD_NS		30720
+#define NIWD_MIN_TIMEOUT	1
+#define NIWD_MAX_TIMEOUT	515
+#define NIWD_DEFAULT_TIMEOUT	60
+
+#define NIWD_NAME		"ni903x_wdt"
+
+struct ni903x_wdt {
+	struct device *dev;
+	u16 io_base;
+	struct watchdog_device wdd;
+};
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		 "Watchdog timeout in seconds. (default="
+		 __MODULE_STRING(NIWD_DEFAULT_TIMEOUT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, S_IRUGO);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void ni903x_start(struct ni903x_wdt *wdt)
+{
+	u8 control = inb(wdt->io_base + NIWD_CONTROL);
+
+	outb(control | NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL);
+	outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL);
+}
+
+static int ni903x_wdd_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 counter = timeout * (1000000000 / NIWD_PERIOD_NS);
+
+	outb(((0x00FF0000 & counter) >> 16), wdt->io_base + NIWD_SEED2);
+	outb(((0x0000FF00 & counter) >> 8), wdt->io_base + NIWD_SEED1);
+	outb((0x000000FF & counter), wdt->io_base + NIWD_SEED0);
+
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static unsigned int ni903x_wdd_get_timeleft(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 control, counter0, counter1, counter2;
+	u32 counter;
+
+	control = inb(wdt->io_base + NIWD_CONTROL);
+	control |= NIWD_CONTROL_CAPTURECOUNTER;
+	outb(control, wdt->io_base + NIWD_CONTROL);
+
+	counter2 = inb(wdt->io_base + NIWD_COUNTER2);
+	counter1 = inb(wdt->io_base + NIWD_COUNTER1);
+	counter0 = inb(wdt->io_base + NIWD_COUNTER0);
+
+	counter = (counter2 << 16) | (counter1 << 8) | counter0;
+
+	return counter / (1000000000 / NIWD_PERIOD_NS);
+}
+
+static int ni903x_wdd_ping(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 control;
+
+	control = inb(wdt->io_base + NIWD_CONTROL);
+	outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL);
+
+	return 0;
+}
+
+static int ni903x_wdd_start(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(NIWD_CONTROL_RESET | NIWD_CONTROL_PROC_RESET,
+	     wdt->io_base + NIWD_CONTROL);
+
+	ni903x_wdd_set_timeout(wdd, wdd->timeout);
+	ni903x_start(wdt);
+
+	return 0;
+}
+
+static int ni903x_wdd_stop(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL);
+
+	return 0;
+}
+
+static acpi_status ni903x_resources(struct acpi_resource *res, void *data)
+{
+	struct ni903x_wdt *wdt = data;
+	u16 io_size;
+
+	switch (res->type) {
+	case ACPI_RESOURCE_TYPE_IO:
+		if (wdt->io_base != 0) {
+			dev_err(wdt->dev, "too many IO resources\n");
+			return AE_ERROR;
+		}
+
+		wdt->io_base = res->data.io.minimum;
+		io_size = res->data.io.address_length;
+
+		if (io_size < NIWD_IO_SIZE) {
+			dev_err(wdt->dev, "memory region too small\n");
+			return AE_ERROR;
+		}
+
+		if (!devm_request_region(wdt->dev, wdt->io_base, io_size,
+					 NIWD_NAME)) {
+			dev_err(wdt->dev, "failed to get memory region\n");
+			return AE_ERROR;
+		}
+
+		return AE_OK;
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+	default:
+		/* Ignore unsupported resources, e.g. IRQ */
+		return AE_OK;
+	}
+}
+
+static const struct watchdog_info ni903x_wdd_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "NI Watchdog",
+};
+
+static const struct watchdog_ops ni903x_wdd_ops = {
+	.owner = THIS_MODULE,
+	.start = ni903x_wdd_start,
+	.stop = ni903x_wdd_stop,
+	.ping = ni903x_wdd_ping,
+	.set_timeout = ni903x_wdd_set_timeout,
+	.get_timeleft = ni903x_wdd_get_timeleft,
+};
+
+static int ni903x_acpi_add(struct acpi_device *device)
+{
+	struct device *dev = &device->dev;
+	struct watchdog_device *wdd;
+	struct ni903x_wdt *wdt;
+	acpi_status status;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	device->driver_data = wdt;
+	wdt->dev = dev;
+
+	status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+				     ni903x_resources, wdt);
+	if (ACPI_FAILURE(status) || wdt->io_base == 0) {
+		dev_err(dev, "failed to get resources\n");
+		return -ENODEV;
+	}
+
+	wdd = &wdt->wdd;
+	wdd->info = &ni903x_wdd_info;
+	wdd->ops = &ni903x_wdd_ops;
+	wdd->min_timeout = NIWD_MIN_TIMEOUT;
+	wdd->max_timeout = NIWD_MAX_TIMEOUT;
+	wdd->timeout = NIWD_DEFAULT_TIMEOUT;
+	wdd->parent = dev;
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, nowayout);
+	watchdog_init_timeout(wdd, timeout, dev);
+
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		return ret;
+
+	/* Switch from boot mode to user mode */
+	outb(NIWD_CONTROL_RESET | NIWD_CONTROL_MODE,
+	     wdt->io_base + NIWD_CONTROL);
+
+	dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
+		wdt->io_base, timeout, nowayout);
+
+	return 0;
+}
+
+static void ni903x_acpi_remove(struct acpi_device *device)
+{
+	struct ni903x_wdt *wdt = acpi_driver_data(device);
+
+	ni903x_wdd_stop(&wdt->wdd);
+	watchdog_unregister_device(&wdt->wdd);
+}
+
+static const struct acpi_device_id ni903x_device_ids[] = {
+	{"NIC775C", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, ni903x_device_ids);
+
+static struct acpi_driver ni903x_acpi_driver = {
+	.name = NIWD_NAME,
+	.ids = ni903x_device_ids,
+	.ops = {
+		.add = ni903x_acpi_add,
+		.remove = ni903x_acpi_remove,
+	},
+};
+
+module_acpi_driver(ni903x_acpi_driver);
+
+MODULE_DESCRIPTION("NI 903x Watchdog");
+MODULE_AUTHOR("Jeff Westfahl <jeff.westfahl@ni.com>");
+MODULE_AUTHOR("Kyle Roeschley <kyle.roeschley@ni.com>");
+MODULE_LICENSE("GPL");