Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
new file mode 100644
index 000000000..d640b26e1
--- /dev/null
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	NANO7240 SBC Watchdog device driver
+ *
+ *	Based on w83877f.c by Scott Jennings,
+ *
+ *	(c) Copyright 2007  Gilles GIGAN <gilles.gigan@jcu.edu.au>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+
+#define SBC7240_ENABLE_PORT		0x443
+#define SBC7240_DISABLE_PORT		0x043
+#define SBC7240_SET_TIMEOUT_PORT	SBC7240_ENABLE_PORT
+#define SBC7240_MAGIC_CHAR		'V'
+
+#define SBC7240_TIMEOUT		30
+#define SBC7240_MAX_TIMEOUT		255
+static int timeout = SBC7240_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<="
+		 __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default="
+		 __MODULE_STRING(SBC7240_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file");
+
+#define SBC7240_OPEN_STATUS_BIT		0
+#define SBC7240_ENABLED_STATUS_BIT	1
+#define SBC7240_EXPECT_CLOSE_STATUS_BIT	2
+static unsigned long wdt_status;
+
+/*
+ * Utility routines
+ */
+
+static void wdt_disable(void)
+{
+	/* disable the watchdog */
+	if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_DISABLE_PORT);
+		pr_info("Watchdog timer is now disabled\n");
+	}
+}
+
+static void wdt_enable(void)
+{
+	/* enable the watchdog */
+	if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_ENABLE_PORT);
+		pr_info("Watchdog timer is now enabled\n");
+	}
+}
+
+static int wdt_set_timeout(int t)
+{
+	if (t < 1 || t > SBC7240_MAX_TIMEOUT) {
+		pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT);
+		return -1;
+	}
+	/* set the timeout */
+	outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT);
+	timeout = t;
+	pr_info("timeout set to %d seconds\n", t);
+	return 0;
+}
+
+/* Whack the dog */
+static inline void wdt_keepalive(void)
+{
+	if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status))
+		inb_p(SBC7240_ENABLE_PORT);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+static ssize_t fop_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	size_t i;
+	char c;
+
+	if (count) {
+		if (!nowayout) {
+			clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+				&wdt_status);
+
+			/* is there a magic char ? */
+			for (i = 0; i != count; i++) {
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == SBC7240_MAGIC_CHAR) {
+					set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+						&wdt_status);
+					break;
+				}
+			}
+		}
+
+		wdt_keepalive();
+	}
+
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status))
+		return -EBUSY;
+
+	wdt_enable();
+
+	return stream_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status)
+	    || !nowayout) {
+		wdt_disable();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		wdt_keepalive();
+	}
+
+	clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status);
+	return 0;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_KEEPALIVEPING|
+		   WDIOF_SETTIMEOUT|
+		   WDIOF_MAGICCLOSE,
+	.firmware_version = 1,
+	.identity = "SBC7240",
+};
+
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((void __user *)arg, &ident, sizeof(ident))
+						 ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int __user *)arg);
+	case WDIOC_SETOPTIONS:
+	{
+		int options;
+		int retval = -EINVAL;
+
+		if (get_user(options, (int __user *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			retval = 0;
+		}
+
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, (int __user *)arg))
+			return -EFAULT;
+
+		if (wdt_set_timeout(new_timeout))
+			return -EINVAL;
+	}
+		fallthrough;
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, (int __user *)arg);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = fop_write,
+	.open = fop_open,
+	.release = fop_close,
+	.unlocked_ioctl = fop_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+			  void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit sbc7240_wdt_unload(void)
+{
+	pr_info("Removing watchdog\n");
+	misc_deregister(&wdt_miscdev);
+
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(SBC7240_ENABLE_PORT, 1);
+}
+
+static int __init sbc7240_wdt_init(void)
+{
+	int rc = -EBUSY;
+
+	if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       SBC7240_ENABLE_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* The IO port 0x043 used to disable the watchdog
+	 * is already claimed by the system timer, so we
+	 * can't request_region() it ...*/
+
+	if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
+		timeout = SBC7240_TIMEOUT;
+		pr_info("timeout value must be 1<=x<=%d, using %d\n",
+			SBC7240_MAX_TIMEOUT, timeout);
+	}
+	wdt_set_timeout(timeout);
+	wdt_disable();
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_reboot_notifier;
+	}
+
+	pr_info("Watchdog driver for SBC7240 initialised (nowayout=%d)\n",
+		nowayout);
+
+	return 0;
+
+err_out_reboot_notifier:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region:
+	release_region(SBC7240_ENABLE_PORT, 1);
+err_out:
+	return rc;
+}
+
+module_init(sbc7240_wdt_init);
+module_exit(sbc7240_wdt_unload);
+
+MODULE_AUTHOR("Gilles Gigan");
+MODULE_DESCRIPTION("Watchdog device driver for single board"
+		   " computers EPIC Nano 7240 from iEi");
+MODULE_LICENSE("GPL");