Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 264 insertions, 0 deletions

diff --git a/drivers/xen/xen-balloon.c b/drivers/xen/xen-balloon.c
new file mode 100644
index 000000000..8cd583db2
--- /dev/null
+++ b/drivers/xen/xen-balloon.c
@@ -0,0 +1,264 @@
+/******************************************************************************
+ * Xen balloon driver - enables returning/claiming memory to/from Xen.
+ *
+ * Copyright (c) 2003, B Dragovic
+ * Copyright (c) 2003-2004, M Williamson, K Fraser
+ * Copyright (c) 2005 Dan M. Smith, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm_types.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/memory_hotplug.h>
+
+#include <xen/xen.h>
+#include <xen/interface/xen.h>
+#include <xen/balloon.h>
+#include <xen/xenbus.h>
+#include <xen/features.h>
+#include <xen/page.h>
+#include <xen/mem-reservation.h>
+
+#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
+
+#define BALLOON_CLASS_NAME "xen_memory"
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+u64 xen_saved_max_mem_size = 0;
+#endif
+
+static struct device balloon_dev;
+
+static int register_balloon(struct device *dev);
+
+/* React to a change in the target key */
+static void watch_target(struct xenbus_watch *watch,
+			 const char *path, const char *token)
+{
+	unsigned long long new_target, static_max;
+	int err;
+	static bool watch_fired;
+	static long target_diff;
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+	/* The balloon driver will take care of adding memory now. */
+	if (xen_saved_max_mem_size)
+		max_mem_size = xen_saved_max_mem_size;
+#endif
+
+	err = xenbus_scanf(XBT_NIL, "memory", "target", "%llu", &new_target);
+	if (err != 1) {
+		/* This is ok (for domain0 at least) - so just return */
+		return;
+	}
+
+	/* The given memory/target value is in KiB, so it needs converting to
+	 * pages. PAGE_SHIFT converts bytes to pages, hence PAGE_SHIFT - 10.
+	 */
+	new_target >>= PAGE_SHIFT - 10;
+
+	if (!watch_fired) {
+		watch_fired = true;
+
+		if ((xenbus_scanf(XBT_NIL, "memory", "static-max",
+				  "%llu", &static_max) == 1) ||
+		    (xenbus_scanf(XBT_NIL, "memory", "memory_static_max",
+				  "%llu", &static_max) == 1))
+			static_max >>= PAGE_SHIFT - 10;
+		else
+			static_max = balloon_stats.current_pages;
+
+		target_diff = (xen_pv_domain() || xen_initial_domain()) ? 0
+				: static_max - balloon_stats.target_pages;
+	}
+
+	balloon_set_new_target(new_target - target_diff);
+}
+static struct xenbus_watch target_watch = {
+	.node = "memory/target",
+	.callback = watch_target,
+};
+
+
+static int balloon_init_watcher(struct notifier_block *notifier,
+				unsigned long event,
+				void *data)
+{
+	int err;
+
+	err = register_xenbus_watch(&target_watch);
+	if (err)
+		pr_err("Failed to set balloon watcher\n");
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block xenstore_notifier = {
+	.notifier_call = balloon_init_watcher,
+};
+
+void xen_balloon_init(void)
+{
+	register_balloon(&balloon_dev);
+
+	register_xenstore_notifier(&xenstore_notifier);
+}
+EXPORT_SYMBOL_GPL(xen_balloon_init);
+
+#define BALLOON_SHOW(name, format, args...)				\
+	static ssize_t name##_show(struct device *dev,			\
+				   struct device_attribute *attr,	\
+				   char *buf)				\
+	{								\
+		return sprintf(buf, format, ##args);			\
+	}								\
+	static DEVICE_ATTR_RO(name)
+
+BALLOON_SHOW(current_kb, "%lu\n", PAGES2KB(balloon_stats.current_pages));
+BALLOON_SHOW(low_kb, "%lu\n", PAGES2KB(balloon_stats.balloon_low));
+BALLOON_SHOW(high_kb, "%lu\n", PAGES2KB(balloon_stats.balloon_high));
+
+static DEVICE_ULONG_ATTR(schedule_delay, 0444, balloon_stats.schedule_delay);
+static DEVICE_ULONG_ATTR(max_schedule_delay, 0644, balloon_stats.max_schedule_delay);
+static DEVICE_ULONG_ATTR(retry_count, 0444, balloon_stats.retry_count);
+static DEVICE_ULONG_ATTR(max_retry_count, 0644, balloon_stats.max_retry_count);
+static DEVICE_BOOL_ATTR(scrub_pages, 0644, xen_scrub_pages);
+
+static ssize_t target_kb_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(balloon_stats.target_pages));
+}
+
+static ssize_t target_kb_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	char *endchar;
+	unsigned long long target_bytes;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	target_bytes = simple_strtoull(buf, &endchar, 0) * 1024;
+
+	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(target_kb);
+
+static ssize_t target_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (unsigned long long)balloon_stats.target_pages
+		       << PAGE_SHIFT);
+}
+
+static ssize_t target_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	char *endchar;
+	unsigned long long target_bytes;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	target_bytes = memparse(buf, &endchar);
+
+	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(target);
+
+static struct attribute *balloon_attrs[] = {
+	&dev_attr_target_kb.attr,
+	&dev_attr_target.attr,
+	&dev_attr_schedule_delay.attr.attr,
+	&dev_attr_max_schedule_delay.attr.attr,
+	&dev_attr_retry_count.attr.attr,
+	&dev_attr_max_retry_count.attr.attr,
+	&dev_attr_scrub_pages.attr.attr,
+	NULL
+};
+
+static const struct attribute_group balloon_group = {
+	.attrs = balloon_attrs
+};
+
+static struct attribute *balloon_info_attrs[] = {
+	&dev_attr_current_kb.attr,
+	&dev_attr_low_kb.attr,
+	&dev_attr_high_kb.attr,
+	NULL
+};
+
+static const struct attribute_group balloon_info_group = {
+	.name = "info",
+	.attrs = balloon_info_attrs
+};
+
+static const struct attribute_group *balloon_groups[] = {
+	&balloon_group,
+	&balloon_info_group,
+	NULL
+};
+
+static struct bus_type balloon_subsys = {
+	.name = BALLOON_CLASS_NAME,
+	.dev_name = BALLOON_CLASS_NAME,
+};
+
+static int register_balloon(struct device *dev)
+{
+	int error;
+
+	error = subsys_system_register(&balloon_subsys, NULL);
+	if (error)
+		return error;
+
+	dev->id = 0;
+	dev->bus = &balloon_subsys;
+	dev->groups = balloon_groups;
+
+	error = device_register(dev);
+	if (error) {
+		bus_unregister(&balloon_subsys);
+		return error;
+	}
+
+	return 0;
+}