Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 326 insertions, 0 deletions

diff --git a/fs/9p/fid.c b/fs/9p/fid.c
new file mode 100644
index 000000000..805151114
--- /dev/null
+++ b/fs/9p/fid.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * V9FS FID Management
+ *
+ *  Copyright (C) 2007 by Latchesar Ionkov <lucho@ionkov.net>
+ *  Copyright (C) 2005, 2006 by Eric Van Hensbergen <ericvh@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <net/9p/9p.h>
+#include <net/9p/client.h>
+
+#include "v9fs.h"
+#include "v9fs_vfs.h"
+#include "fid.h"
+
+static inline void __add_fid(struct dentry *dentry, struct p9_fid *fid)
+{
+	hlist_add_head(&fid->dlist, (struct hlist_head *)&dentry->d_fsdata);
+}
+
+
+/**
+ * v9fs_fid_add - add a fid to a dentry
+ * @dentry: dentry that the fid is being added to
+ * @pfid: fid to add, NULLed out
+ *
+ */
+void v9fs_fid_add(struct dentry *dentry, struct p9_fid **pfid)
+{
+	struct p9_fid *fid = *pfid;
+
+	spin_lock(&dentry->d_lock);
+	__add_fid(dentry, fid);
+	spin_unlock(&dentry->d_lock);
+
+	*pfid = NULL;
+}
+
+/**
+ * v9fs_fid_find_inode - search for an open fid off of the inode list
+ * @inode: return a fid pointing to a specific inode
+ * @uid: return a fid belonging to the specified user
+ *
+ */
+
+static struct p9_fid *v9fs_fid_find_inode(struct inode *inode, kuid_t uid)
+{
+	struct hlist_head *h;
+	struct p9_fid *fid, *ret = NULL;
+
+	p9_debug(P9_DEBUG_VFS, " inode: %p\n", inode);
+
+	spin_lock(&inode->i_lock);
+	h = (struct hlist_head *)&inode->i_private;
+	hlist_for_each_entry(fid, h, ilist) {
+		if (uid_eq(fid->uid, uid)) {
+			p9_fid_get(fid);
+			ret = fid;
+			break;
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	return ret;
+}
+
+/**
+ * v9fs_open_fid_add - add an open fid to an inode
+ * @inode: inode that the fid is being added to
+ * @pfid: fid to add, NULLed out
+ *
+ */
+
+void v9fs_open_fid_add(struct inode *inode, struct p9_fid **pfid)
+{
+	struct p9_fid *fid = *pfid;
+
+	spin_lock(&inode->i_lock);
+	hlist_add_head(&fid->ilist, (struct hlist_head *)&inode->i_private);
+	spin_unlock(&inode->i_lock);
+
+	*pfid = NULL;
+}
+
+
+/**
+ * v9fs_fid_find - retrieve a fid that belongs to the specified uid
+ * @dentry: dentry to look for fid in
+ * @uid: return fid that belongs to the specified user
+ * @any: if non-zero, return any fid associated with the dentry
+ *
+ */
+
+static struct p9_fid *v9fs_fid_find(struct dentry *dentry, kuid_t uid, int any)
+{
+	struct p9_fid *fid, *ret;
+
+	p9_debug(P9_DEBUG_VFS, " dentry: %pd (%p) uid %d any %d\n",
+		 dentry, dentry, from_kuid(&init_user_ns, uid),
+		 any);
+	ret = NULL;
+	/* we'll recheck under lock if there's anything to look in */
+	if (dentry->d_fsdata) {
+		struct hlist_head *h = (struct hlist_head *)&dentry->d_fsdata;
+
+		spin_lock(&dentry->d_lock);
+		hlist_for_each_entry(fid, h, dlist) {
+			if (any || uid_eq(fid->uid, uid)) {
+				ret = fid;
+				p9_fid_get(ret);
+				break;
+			}
+		}
+		spin_unlock(&dentry->d_lock);
+	} else {
+		if (dentry->d_inode)
+			ret = v9fs_fid_find_inode(dentry->d_inode, uid);
+	}
+
+	return ret;
+}
+
+/*
+ * We need to hold v9ses->rename_sem as long as we hold references
+ * to returned path array. Array element contain pointers to
+ * dentry names.
+ */
+static int build_path_from_dentry(struct v9fs_session_info *v9ses,
+				  struct dentry *dentry, const unsigned char ***names)
+{
+	int n = 0, i;
+	const unsigned char **wnames;
+	struct dentry *ds;
+
+	for (ds = dentry; !IS_ROOT(ds); ds = ds->d_parent)
+		n++;
+
+	wnames = kmalloc_array(n, sizeof(char *), GFP_KERNEL);
+	if (!wnames)
+		goto err_out;
+
+	for (ds = dentry, i = (n-1); i >= 0; i--, ds = ds->d_parent)
+		wnames[i] = ds->d_name.name;
+
+	*names = wnames;
+	return n;
+err_out:
+	return -ENOMEM;
+}
+
+static struct p9_fid *v9fs_fid_lookup_with_uid(struct dentry *dentry,
+					       kuid_t uid, int any)
+{
+	struct dentry *ds;
+	const unsigned char **wnames, *uname;
+	int i, n, l, access;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid, *root_fid, *old_fid;
+
+	v9ses = v9fs_dentry2v9ses(dentry);
+	access = v9ses->flags & V9FS_ACCESS_MASK;
+	fid = v9fs_fid_find(dentry, uid, any);
+	if (fid)
+		return fid;
+	/*
+	 * we don't have a matching fid. To do a TWALK we need
+	 * parent fid. We need to prevent rename when we want to
+	 * look at the parent.
+	 */
+	down_read(&v9ses->rename_sem);
+	ds = dentry->d_parent;
+	fid = v9fs_fid_find(ds, uid, any);
+	if (fid) {
+		/* Found the parent fid do a lookup with that */
+		old_fid = fid;
+
+		fid = p9_client_walk(old_fid, 1, &dentry->d_name.name, 1);
+		p9_fid_put(old_fid);
+		goto fid_out;
+	}
+	up_read(&v9ses->rename_sem);
+
+	/* start from the root and try to do a lookup */
+	root_fid = v9fs_fid_find(dentry->d_sb->s_root, uid, any);
+	if (!root_fid) {
+		/* the user is not attached to the fs yet */
+		if (access == V9FS_ACCESS_SINGLE)
+			return ERR_PTR(-EPERM);
+
+		if (v9fs_proto_dotu(v9ses) || v9fs_proto_dotl(v9ses))
+			uname = NULL;
+		else
+			uname = v9ses->uname;
+
+		fid = p9_client_attach(v9ses->clnt, NULL, uname, uid,
+				       v9ses->aname);
+		if (IS_ERR(fid))
+			return fid;
+
+		root_fid = p9_fid_get(fid);
+		v9fs_fid_add(dentry->d_sb->s_root, &fid);
+	}
+	/* If we are root ourself just return that */
+	if (dentry->d_sb->s_root == dentry)
+		return root_fid;
+
+	/*
+	 * Do a multipath walk with attached root.
+	 * When walking parent we need to make sure we
+	 * don't have a parallel rename happening
+	 */
+	down_read(&v9ses->rename_sem);
+	n  = build_path_from_dentry(v9ses, dentry, &wnames);
+	if (n < 0) {
+		fid = ERR_PTR(n);
+		goto err_out;
+	}
+	fid = root_fid;
+	old_fid = root_fid;
+	i = 0;
+	while (i < n) {
+		l = min(n - i, P9_MAXWELEM);
+		/*
+		 * We need to hold rename lock when doing a multipath
+		 * walk to ensure none of the path components change
+		 */
+		fid = p9_client_walk(old_fid, l, &wnames[i],
+				     old_fid == root_fid /* clone */);
+		/* non-cloning walk will return the same fid */
+		if (fid != old_fid) {
+			p9_fid_put(old_fid);
+			old_fid = fid;
+		}
+		if (IS_ERR(fid)) {
+			kfree(wnames);
+			goto err_out;
+		}
+		i += l;
+	}
+	kfree(wnames);
+fid_out:
+	if (!IS_ERR(fid)) {
+		spin_lock(&dentry->d_lock);
+		if (d_unhashed(dentry)) {
+			spin_unlock(&dentry->d_lock);
+			p9_fid_put(fid);
+			fid = ERR_PTR(-ENOENT);
+		} else {
+			__add_fid(dentry, fid);
+			p9_fid_get(fid);
+			spin_unlock(&dentry->d_lock);
+		}
+	}
+err_out:
+	up_read(&v9ses->rename_sem);
+	return fid;
+}
+
+/**
+ * v9fs_fid_lookup - lookup for a fid, try to walk if not found
+ * @dentry: dentry to look for fid in
+ *
+ * Look for a fid in the specified dentry for the current user.
+ * If no fid is found, try to create one walking from a fid from the parent
+ * dentry (if it has one), or the root dentry. If the user haven't accessed
+ * the fs yet, attach now and walk from the root.
+ */
+
+struct p9_fid *v9fs_fid_lookup(struct dentry *dentry)
+{
+	kuid_t uid;
+	int  any, access;
+	struct v9fs_session_info *v9ses;
+
+	v9ses = v9fs_dentry2v9ses(dentry);
+	access = v9ses->flags & V9FS_ACCESS_MASK;
+	switch (access) {
+	case V9FS_ACCESS_SINGLE:
+	case V9FS_ACCESS_USER:
+	case V9FS_ACCESS_CLIENT:
+		uid = current_fsuid();
+		any = 0;
+		break;
+
+	case V9FS_ACCESS_ANY:
+		uid = v9ses->uid;
+		any = 1;
+		break;
+
+	default:
+		uid = INVALID_UID;
+		any = 0;
+		break;
+	}
+	return v9fs_fid_lookup_with_uid(dentry, uid, any);
+}
+
+struct p9_fid *v9fs_writeback_fid(struct dentry *dentry)
+{
+	int err;
+	struct p9_fid *fid, *ofid;
+
+	ofid = v9fs_fid_lookup_with_uid(dentry, GLOBAL_ROOT_UID, 0);
+	fid = clone_fid(ofid);
+	if (IS_ERR(fid))
+		goto error_out;
+	p9_fid_put(ofid);
+	/*
+	 * writeback fid will only be used to write back the
+	 * dirty pages. We always request for the open fid in read-write
+	 * mode so that a partial page write which result in page
+	 * read can work.
+	 */
+	err = p9_client_open(fid, O_RDWR);
+	if (err < 0) {
+		p9_fid_put(fid);
+		fid = ERR_PTR(err);
+		goto error_out;
+	}
+error_out:
+	return fid;
+}