Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 140 insertions, 0 deletions

diff --git a/fs/Makefile b/fs/Makefile
new file mode 100644
index 000000000..05f89b5c9
--- /dev/null
+++ b/fs/Makefile
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux filesystems.
+#
+# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+# 
+
+obj-$(CONFIG_SYSCTL)		+= sysctls.o
+
+obj-y :=	open.o read_write.o file_table.o super.o \
+		char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
+		ioctl.o readdir.o select.o dcache.o inode.o \
+		attr.o bad_inode.o file.o filesystems.o namespace.o \
+		seq_file.o xattr.o libfs.o fs-writeback.o \
+		pnode.o splice.o sync.o utimes.o d_path.o \
+		stack.o fs_struct.o statfs.o fs_pin.o nsfs.o \
+		fs_types.o fs_context.o fs_parser.o fsopen.o init.o \
+		kernel_read_file.o mnt_idmapping.o remap_range.o
+
+ifeq ($(CONFIG_BLOCK),y)
+obj-y +=	buffer.o mpage.o
+else
+obj-y +=	no-block.o
+endif
+
+obj-$(CONFIG_PROC_FS) += proc_namespace.o
+
+obj-$(CONFIG_LEGACY_DIRECT_IO)	+= direct-io.o
+obj-y				+= notify/
+obj-$(CONFIG_EPOLL)		+= eventpoll.o
+obj-y				+= anon_inodes.o
+obj-$(CONFIG_SIGNALFD)		+= signalfd.o
+obj-$(CONFIG_TIMERFD)		+= timerfd.o
+obj-$(CONFIG_EVENTFD)		+= eventfd.o
+obj-$(CONFIG_USERFAULTFD)	+= userfaultfd.o
+obj-$(CONFIG_AIO)               += aio.o
+obj-$(CONFIG_FS_DAX)		+= dax.o
+obj-$(CONFIG_FS_ENCRYPTION)	+= crypto/
+obj-$(CONFIG_FS_VERITY)		+= verity/
+obj-$(CONFIG_FILE_LOCKING)      += locks.o
+obj-$(CONFIG_BINFMT_MISC)	+= binfmt_misc.o
+obj-$(CONFIG_BINFMT_SCRIPT)	+= binfmt_script.o
+obj-$(CONFIG_BINFMT_ELF)	+= binfmt_elf.o
+obj-$(CONFIG_COMPAT_BINFMT_ELF)	+= compat_binfmt_elf.o
+obj-$(CONFIG_BINFMT_ELF_FDPIC)	+= binfmt_elf_fdpic.o
+obj-$(CONFIG_BINFMT_FLAT)	+= binfmt_flat.o
+
+obj-$(CONFIG_FS_MBCACHE)	+= mbcache.o
+obj-$(CONFIG_FS_POSIX_ACL)	+= posix_acl.o
+obj-$(CONFIG_NFS_COMMON)	+= nfs_common/
+obj-$(CONFIG_COREDUMP)		+= coredump.o
+obj-$(CONFIG_SYSCTL)		+= drop_caches.o
+
+obj-$(CONFIG_FHANDLE)		+= fhandle.o
+obj-y				+= iomap/
+
+obj-y				+= quota/
+
+obj-$(CONFIG_PROC_FS)		+= proc/
+obj-$(CONFIG_KERNFS)		+= kernfs/
+obj-$(CONFIG_SYSFS)		+= sysfs/
+obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
+obj-y				+= devpts/
+
+obj-$(CONFIG_DLM)		+= dlm/
+ 
+# Do not add any filesystems before this line
+obj-$(CONFIG_NETFS_SUPPORT)	+= netfs/
+obj-$(CONFIG_FSCACHE)		+= fscache/
+obj-$(CONFIG_REISERFS_FS)	+= reiserfs/
+obj-$(CONFIG_EXT4_FS)		+= ext4/
+# We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
+# ext2 driver, which doesn't know about journalling!  Explicitly request ext2
+# by giving the rootfstype= parameter.
+obj-$(CONFIG_EXT2_FS)		+= ext2/
+obj-$(CONFIG_JBD2)		+= jbd2/
+obj-$(CONFIG_CRAMFS)		+= cramfs/
+obj-$(CONFIG_SQUASHFS)		+= squashfs/
+obj-y				+= ramfs/
+obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+obj-$(CONFIG_CODA_FS)		+= coda/
+obj-$(CONFIG_MINIX_FS)		+= minix/
+obj-$(CONFIG_FAT_FS)		+= fat/
+obj-$(CONFIG_EXFAT_FS)		+= exfat/
+obj-$(CONFIG_BFS_FS)		+= bfs/
+obj-$(CONFIG_ISO9660_FS)	+= isofs/
+obj-$(CONFIG_HFSPLUS_FS)	+= hfsplus/ # Before hfs to find wrapped HFS+
+obj-$(CONFIG_HFS_FS)		+= hfs/
+obj-$(CONFIG_ECRYPT_FS)		+= ecryptfs/
+obj-$(CONFIG_VXFS_FS)		+= freevxfs/
+obj-$(CONFIG_NFS_FS)		+= nfs/
+obj-$(CONFIG_EXPORTFS)		+= exportfs/
+obj-$(CONFIG_NFSD)		+= nfsd/
+obj-$(CONFIG_LOCKD)		+= lockd/
+obj-$(CONFIG_NLS)		+= nls/
+obj-y				+= unicode/
+obj-$(CONFIG_SYSV_FS)		+= sysv/
+obj-$(CONFIG_SMBFS_COMMON)	+= smbfs_common/
+obj-$(CONFIG_CIFS)		+= cifs/
+obj-$(CONFIG_SMB_SERVER)	+= ksmbd/
+obj-$(CONFIG_HPFS_FS)		+= hpfs/
+obj-$(CONFIG_NTFS_FS)		+= ntfs/
+obj-$(CONFIG_NTFS3_FS)		+= ntfs3/
+obj-$(CONFIG_UFS_FS)		+= ufs/
+obj-$(CONFIG_EFS_FS)		+= efs/
+obj-$(CONFIG_JFFS2_FS)		+= jffs2/
+obj-$(CONFIG_UBIFS_FS)		+= ubifs/
+obj-$(CONFIG_AFFS_FS)		+= affs/
+obj-$(CONFIG_ROMFS_FS)		+= romfs/
+obj-$(CONFIG_QNX4FS_FS)		+= qnx4/
+obj-$(CONFIG_QNX6FS_FS)		+= qnx6/
+obj-$(CONFIG_AUTOFS_FS)		+= autofs/
+obj-$(CONFIG_ADFS_FS)		+= adfs/
+obj-$(CONFIG_FUSE_FS)		+= fuse/
+obj-$(CONFIG_OVERLAY_FS)	+= overlayfs/
+obj-$(CONFIG_ORANGEFS_FS)       += orangefs/
+obj-$(CONFIG_UDF_FS)		+= udf/
+obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_OMFS_FS)		+= omfs/
+obj-$(CONFIG_JFS_FS)		+= jfs/
+obj-$(CONFIG_XFS_FS)		+= xfs/
+obj-$(CONFIG_9P_FS)		+= 9p/
+obj-$(CONFIG_AFS_FS)		+= afs/
+obj-$(CONFIG_NILFS2_FS)		+= nilfs2/
+obj-$(CONFIG_BEFS_FS)		+= befs/
+obj-$(CONFIG_HOSTFS)		+= hostfs/
+obj-$(CONFIG_CACHEFILES)	+= cachefiles/
+obj-$(CONFIG_DEBUG_FS)		+= debugfs/
+obj-$(CONFIG_TRACING)		+= tracefs/
+obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+obj-$(CONFIG_GFS2_FS)           += gfs2/
+obj-$(CONFIG_F2FS_FS)		+= f2fs/
+obj-$(CONFIG_CEPH_FS)		+= ceph/
+obj-$(CONFIG_PSTORE)		+= pstore/
+obj-$(CONFIG_EFIVAR_FS)		+= efivarfs/
+obj-$(CONFIG_EROFS_FS)		+= erofs/
+obj-$(CONFIG_VBOXSF_FS)		+= vboxsf/
+obj-$(CONFIG_ZONEFS_FS)		+= zonefs/