Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 263 insertions, 0 deletions

diff --git a/fs/ubifs/compress.c b/fs/ubifs/compress.c
new file mode 100644
index 000000000..3a92e6af6
--- /dev/null
+++ b/fs/ubifs/compress.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file is part of UBIFS.
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation.
+ * Copyright (C) 2006, 2007 University of Szeged, Hungary
+ *
+ * Authors: Adrian Hunter
+ *          Artem Bityutskiy (Битюцкий Артём)
+ *          Zoltan Sogor
+ */
+
+/*
+ * This file provides a single place to access to compression and
+ * decompression.
+ */
+
+#include <linux/crypto.h>
+#include "ubifs.h"
+
+/* Fake description object for the "none" compressor */
+static struct ubifs_compressor none_compr = {
+	.compr_type = UBIFS_COMPR_NONE,
+	.name = "none",
+	.capi_name = "",
+};
+
+#ifdef CONFIG_UBIFS_FS_LZO
+static DEFINE_MUTEX(lzo_mutex);
+
+static struct ubifs_compressor lzo_compr = {
+	.compr_type = UBIFS_COMPR_LZO,
+	.comp_mutex = &lzo_mutex,
+	.name = "lzo",
+	.capi_name = "lzo",
+};
+#else
+static struct ubifs_compressor lzo_compr = {
+	.compr_type = UBIFS_COMPR_LZO,
+	.name = "lzo",
+};
+#endif
+
+#ifdef CONFIG_UBIFS_FS_ZLIB
+static DEFINE_MUTEX(deflate_mutex);
+static DEFINE_MUTEX(inflate_mutex);
+
+static struct ubifs_compressor zlib_compr = {
+	.compr_type = UBIFS_COMPR_ZLIB,
+	.comp_mutex = &deflate_mutex,
+	.decomp_mutex = &inflate_mutex,
+	.name = "zlib",
+	.capi_name = "deflate",
+};
+#else
+static struct ubifs_compressor zlib_compr = {
+	.compr_type = UBIFS_COMPR_ZLIB,
+	.name = "zlib",
+};
+#endif
+
+#ifdef CONFIG_UBIFS_FS_ZSTD
+static DEFINE_MUTEX(zstd_enc_mutex);
+static DEFINE_MUTEX(zstd_dec_mutex);
+
+static struct ubifs_compressor zstd_compr = {
+	.compr_type = UBIFS_COMPR_ZSTD,
+	.comp_mutex = &zstd_enc_mutex,
+	.decomp_mutex = &zstd_dec_mutex,
+	.name = "zstd",
+	.capi_name = "zstd",
+};
+#else
+static struct ubifs_compressor zstd_compr = {
+	.compr_type = UBIFS_COMPR_ZSTD,
+	.name = "zstd",
+};
+#endif
+
+/* All UBIFS compressors */
+struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
+
+/**
+ * ubifs_compress - compress data.
+ * @in_buf: data to compress
+ * @in_len: length of the data to compress
+ * @out_buf: output buffer where compressed data should be stored
+ * @out_len: output buffer length is returned here
+ * @compr_type: type of compression to use on enter, actually used compression
+ *              type on exit
+ *
+ * This function compresses input buffer @in_buf of length @in_len and stores
+ * the result in the output buffer @out_buf and the resulting length in
+ * @out_len. If the input buffer does not compress, it is just copied to the
+ * @out_buf. The same happens if @compr_type is %UBIFS_COMPR_NONE or if
+ * compression error occurred.
+ *
+ * Note, if the input buffer was not compressed, it is copied to the output
+ * buffer and %UBIFS_COMPR_NONE is returned in @compr_type.
+ */
+void ubifs_compress(const struct ubifs_info *c, const void *in_buf,
+		    int in_len, void *out_buf, int *out_len, int *compr_type)
+{
+	int err;
+	struct ubifs_compressor *compr = ubifs_compressors[*compr_type];
+
+	if (*compr_type == UBIFS_COMPR_NONE)
+		goto no_compr;
+
+	/* If the input data is small, do not even try to compress it */
+	if (in_len < UBIFS_MIN_COMPR_LEN)
+		goto no_compr;
+
+	if (compr->comp_mutex)
+		mutex_lock(compr->comp_mutex);
+	err = crypto_comp_compress(compr->cc, in_buf, in_len, out_buf,
+				   (unsigned int *)out_len);
+	if (compr->comp_mutex)
+		mutex_unlock(compr->comp_mutex);
+	if (unlikely(err)) {
+		ubifs_warn(c, "cannot compress %d bytes, compressor %s, error %d, leave data uncompressed",
+			   in_len, compr->name, err);
+		goto no_compr;
+	}
+
+	/*
+	 * If the data compressed only slightly, it is better to leave it
+	 * uncompressed to improve read speed.
+	 */
+	if (in_len - *out_len < UBIFS_MIN_COMPRESS_DIFF)
+		goto no_compr;
+
+	return;
+
+no_compr:
+	memcpy(out_buf, in_buf, in_len);
+	*out_len = in_len;
+	*compr_type = UBIFS_COMPR_NONE;
+}
+
+/**
+ * ubifs_decompress - decompress data.
+ * @in_buf: data to decompress
+ * @in_len: length of the data to decompress
+ * @out_buf: output buffer where decompressed data should
+ * @out_len: output length is returned here
+ * @compr_type: type of compression
+ *
+ * This function decompresses data from buffer @in_buf into buffer @out_buf.
+ * The length of the uncompressed data is returned in @out_len. This functions
+ * returns %0 on success or a negative error code on failure.
+ */
+int ubifs_decompress(const struct ubifs_info *c, const void *in_buf,
+		     int in_len, void *out_buf, int *out_len, int compr_type)
+{
+	int err;
+	struct ubifs_compressor *compr;
+
+	if (unlikely(compr_type < 0 || compr_type >= UBIFS_COMPR_TYPES_CNT)) {
+		ubifs_err(c, "invalid compression type %d", compr_type);
+		return -EINVAL;
+	}
+
+	compr = ubifs_compressors[compr_type];
+
+	if (unlikely(!compr->capi_name)) {
+		ubifs_err(c, "%s compression is not compiled in", compr->name);
+		return -EINVAL;
+	}
+
+	if (compr_type == UBIFS_COMPR_NONE) {
+		memcpy(out_buf, in_buf, in_len);
+		*out_len = in_len;
+		return 0;
+	}
+
+	if (compr->decomp_mutex)
+		mutex_lock(compr->decomp_mutex);
+	err = crypto_comp_decompress(compr->cc, in_buf, in_len, out_buf,
+				     (unsigned int *)out_len);
+	if (compr->decomp_mutex)
+		mutex_unlock(compr->decomp_mutex);
+	if (err)
+		ubifs_err(c, "cannot decompress %d bytes, compressor %s, error %d",
+			  in_len, compr->name, err);
+
+	return err;
+}
+
+/**
+ * compr_init - initialize a compressor.
+ * @compr: compressor description object
+ *
+ * This function initializes the requested compressor and returns zero in case
+ * of success or a negative error code in case of failure.
+ */
+static int __init compr_init(struct ubifs_compressor *compr)
+{
+	if (compr->capi_name) {
+		compr->cc = crypto_alloc_comp(compr->capi_name, 0, 0);
+		if (IS_ERR(compr->cc)) {
+			pr_err("UBIFS error (pid %d): cannot initialize compressor %s, error %ld",
+			       current->pid, compr->name, PTR_ERR(compr->cc));
+			return PTR_ERR(compr->cc);
+		}
+	}
+
+	ubifs_compressors[compr->compr_type] = compr;
+	return 0;
+}
+
+/**
+ * compr_exit - de-initialize a compressor.
+ * @compr: compressor description object
+ */
+static void compr_exit(struct ubifs_compressor *compr)
+{
+	if (compr->capi_name)
+		crypto_free_comp(compr->cc);
+	return;
+}
+
+/**
+ * ubifs_compressors_init - initialize UBIFS compressors.
+ *
+ * This function initializes the compressor which were compiled in. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+int __init ubifs_compressors_init(void)
+{
+	int err;
+
+	err = compr_init(&lzo_compr);
+	if (err)
+		return err;
+
+	err = compr_init(&zstd_compr);
+	if (err)
+		goto out_lzo;
+
+	err = compr_init(&zlib_compr);
+	if (err)
+		goto out_zstd;
+
+	ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr;
+	return 0;
+
+out_zstd:
+	compr_exit(&zstd_compr);
+out_lzo:
+	compr_exit(&lzo_compr);
+	return err;
+}
+
+/**
+ * ubifs_compressors_exit - de-initialize UBIFS compressors.
+ */
+void ubifs_compressors_exit(void)
+{
+	compr_exit(&lzo_compr);
+	compr_exit(&zlib_compr);
+	compr_exit(&zstd_compr);
+}