Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 401 insertions, 0 deletions

diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
new file mode 100644
index 000000000..c6af579f7
--- /dev/null
+++ b/include/acpi/actbl.h
@@ -0,0 +1,401 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
+/******************************************************************************
+ *
+ * Name: actbl.h - Basic ACPI Table Definitions
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#ifndef __ACTBL_H__
+#define __ACTBL_H__
+
+/*******************************************************************************
+ *
+ * Fundamental ACPI tables
+ *
+ * This file contains definitions for the ACPI tables that are directly consumed
+ * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
+ * device drivers and other OS support code.
+ *
+ * The RSDP and FACS do not use the common ACPI table header. All other ACPI
+ * tables use the header.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_DSDT           "DSDT"	/* Differentiated System Description Table */
+#define ACPI_SIG_FADT           "FACP"	/* Fixed ACPI Description Table */
+#define ACPI_SIG_FACS           "FACS"	/* Firmware ACPI Control Structure */
+#define ACPI_SIG_OSDT           "OSDT"	/* Override System Description Table */
+#define ACPI_SIG_PSDT           "PSDT"	/* Persistent System Description Table */
+#define ACPI_SIG_RSDP           "RSD PTR "	/* Root System Description Pointer */
+#define ACPI_SIG_RSDT           "RSDT"	/* Root System Description Table */
+#define ACPI_SIG_XSDT           "XSDT"	/* Extended  System Description Table */
+#define ACPI_SIG_SSDT           "SSDT"	/* Secondary System Description Table */
+#define ACPI_RSDP_NAME          "RSDP"	/* Short name for RSDP, not signature */
+#define ACPI_OEM_NAME           "OEM"	/* Short name for OEM, not signature */
+
+/*
+ * All tables and structures must be byte-packed to match the ACPI
+ * specification, since the tables are provided by the system BIOS
+ */
+#pragma pack(1)
+
+/*
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
+ */
+
+/*******************************************************************************
+ *
+ * Master ACPI Table Header. This common header is used by all ACPI tables
+ * except the RSDP and FACS.
+ *
+ ******************************************************************************/
+
+struct acpi_table_header {
+	char signature[ACPI_NAMESEG_SIZE];	/* ASCII table signature */
+	u32 length;		/* Length of table in bytes, including this header */
+	u8 revision;		/* ACPI Specification minor version number */
+	u8 checksum;		/* To make sum of entire table == 0 */
+	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
+	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
+	u32 oem_revision;	/* OEM revision number */
+	char asl_compiler_id[ACPI_NAMESEG_SIZE];	/* ASCII ASL compiler vendor ID */
+	u32 asl_compiler_revision;	/* ASL compiler version */
+};
+
+/*******************************************************************************
+ *
+ * GAS - Generic Address Structure (ACPI 2.0+)
+ *
+ * Note: Since this structure is used in the ACPI tables, it is byte aligned.
+ * If misaligned access is not supported by the hardware, accesses to the
+ * 64-bit Address field must be performed with care.
+ *
+ ******************************************************************************/
+
+struct acpi_generic_address {
+	u8 space_id;		/* Address space where struct or register exists */
+	u8 bit_width;		/* Size in bits of given register */
+	u8 bit_offset;		/* Bit offset within the register */
+	u8 access_width;	/* Minimum Access size (ACPI 3.0) */
+	u64 address;		/* 64-bit address of struct or register */
+};
+
+/*******************************************************************************
+ *
+ * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
+ *        Version 2
+ *
+ ******************************************************************************/
+
+struct acpi_table_rsdp {
+	char signature[8];	/* ACPI signature, contains "RSD PTR " */
+	u8 checksum;		/* ACPI 1.0 checksum */
+	char oem_id[ACPI_OEM_ID_SIZE];	/* OEM identification */
+	u8 revision;		/* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
+	u32 rsdt_physical_address;	/* 32-bit physical address of the RSDT */
+	u32 length;		/* Table length in bytes, including header (ACPI 2.0+) */
+	u64 xsdt_physical_address;	/* 64-bit physical address of the XSDT (ACPI 2.0+) */
+	u8 extended_checksum;	/* Checksum of entire table (ACPI 2.0+) */
+	u8 reserved[3];		/* Reserved, must be zero */
+};
+
+/* Standalone struct for the ACPI 1.0 RSDP */
+
+struct acpi_rsdp_common {
+	char signature[8];
+	u8 checksum;
+	char oem_id[ACPI_OEM_ID_SIZE];
+	u8 revision;
+	u32 rsdt_physical_address;
+};
+
+/* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
+
+struct acpi_rsdp_extension {
+	u32 length;
+	u64 xsdt_physical_address;
+	u8 extended_checksum;
+	u8 reserved[3];
+};
+
+/*******************************************************************************
+ *
+ * RSDT/XSDT - Root System Description Tables
+ *             Version 1 (both)
+ *
+ ******************************************************************************/
+
+struct acpi_table_rsdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 table_offset_entry[1];	/* Array of pointers to ACPI tables */
+};
+
+struct acpi_table_xsdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 table_offset_entry[1];	/* Array of pointers to ACPI tables */
+};
+
+#define ACPI_RSDT_ENTRY_SIZE        (sizeof (u32))
+#define ACPI_XSDT_ENTRY_SIZE        (sizeof (u64))
+
+/*******************************************************************************
+ *
+ * FACS - Firmware ACPI Control Structure (FACS)
+ *
+ ******************************************************************************/
+
+struct acpi_table_facs {
+	char signature[4];	/* ASCII table signature */
+	u32 length;		/* Length of structure, in bytes */
+	u32 hardware_signature;	/* Hardware configuration signature */
+	u32 firmware_waking_vector;	/* 32-bit physical address of the Firmware Waking Vector */
+	u32 global_lock;	/* Global Lock for shared hardware resources */
+	u32 flags;
+	u64 xfirmware_waking_vector;	/* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
+	u8 version;		/* Version of this table (ACPI 2.0+) */
+	u8 reserved[3];		/* Reserved, must be zero */
+	u32 ospm_flags;		/* Flags to be set by OSPM (ACPI 4.0) */
+	u8 reserved1[24];	/* Reserved, must be zero */
+};
+
+/* Masks for global_lock flag field above */
+
+#define ACPI_GLOCK_PENDING          (1)	/* 00: Pending global lock ownership */
+#define ACPI_GLOCK_OWNED            (1<<1)	/* 01: Global lock is owned */
+
+/* Masks for Flags field above  */
+
+#define ACPI_FACS_S4_BIOS_PRESENT   (1)	/* 00: S4BIOS support is present */
+#define ACPI_FACS_64BIT_WAKE        (1<<1)	/* 01: 64-bit wake vector supported (ACPI 4.0) */
+
+/* Masks for ospm_flags field above */
+
+#define ACPI_FACS_64BIT_ENVIRONMENT (1)	/* 00: 64-bit wake environment is required (ACPI 4.0) */
+
+/*******************************************************************************
+ *
+ * FADT - Fixed ACPI Description Table (Signature "FACP")
+ *        Version 6
+ *
+ ******************************************************************************/
+
+/* Fields common to all versions of the FADT */
+
+struct acpi_table_fadt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 facs;		/* 32-bit physical address of FACS */
+	u32 dsdt;		/* 32-bit physical address of DSDT */
+	u8 model;		/* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
+	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */
+	u16 sci_interrupt;	/* System vector of SCI interrupt */
+	u32 smi_command;	/* 32-bit Port address of SMI command port */
+	u8 acpi_enable;		/* Value to write to SMI_CMD to enable ACPI */
+	u8 acpi_disable;	/* Value to write to SMI_CMD to disable ACPI */
+	u8 s4_bios_request;	/* Value to write to SMI_CMD to enter S4BIOS state */
+	u8 pstate_control;	/* Processor performance state control */
+	u32 pm1a_event_block;	/* 32-bit port address of Power Mgt 1a Event Reg Blk */
+	u32 pm1b_event_block;	/* 32-bit port address of Power Mgt 1b Event Reg Blk */
+	u32 pm1a_control_block;	/* 32-bit port address of Power Mgt 1a Control Reg Blk */
+	u32 pm1b_control_block;	/* 32-bit port address of Power Mgt 1b Control Reg Blk */
+	u32 pm2_control_block;	/* 32-bit port address of Power Mgt 2 Control Reg Blk */
+	u32 pm_timer_block;	/* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
+	u32 gpe0_block;		/* 32-bit port address of General Purpose Event 0 Reg Blk */
+	u32 gpe1_block;		/* 32-bit port address of General Purpose Event 1 Reg Blk */
+	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */
+	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */
+	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */
+	u8 pm_timer_length;	/* Byte Length of ports at pm_timer_block */
+	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */
+	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */
+	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */
+	u8 cst_control;		/* Support for the _CST object and C-States change notification */
+	u16 c2_latency;		/* Worst case HW latency to enter/exit C2 state */
+	u16 c3_latency;		/* Worst case HW latency to enter/exit C3 state */
+	u16 flush_size;		/* Processor memory cache line width, in bytes */
+	u16 flush_stride;	/* Number of flush strides that need to be read */
+	u8 duty_offset;		/* Processor duty cycle index in processor P_CNT reg */
+	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register */
+	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */
+	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */
+	u8 century;		/* Index to century in RTC CMOS RAM */
+	u16 boot_flags;		/* IA-PC Boot Architecture Flags (see below for individual flags) */
+	u8 reserved;		/* Reserved, must be zero */
+	u32 flags;		/* Miscellaneous flag bits (see below for individual flags) */
+	struct acpi_generic_address reset_register;	/* 64-bit address of the Reset register */
+	u8 reset_value;		/* Value to write to the reset_register port to reset the system */
+	u16 arm_boot_flags;	/* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */
+	u8 minor_revision;	/* FADT Minor Revision (ACPI 5.1) */
+	u64 Xfacs;		/* 64-bit physical address of FACS */
+	u64 Xdsdt;		/* 64-bit physical address of DSDT */
+	struct acpi_generic_address xpm1a_event_block;	/* 64-bit Extended Power Mgt 1a Event Reg Blk address */
+	struct acpi_generic_address xpm1b_event_block;	/* 64-bit Extended Power Mgt 1b Event Reg Blk address */
+	struct acpi_generic_address xpm1a_control_block;	/* 64-bit Extended Power Mgt 1a Control Reg Blk address */
+	struct acpi_generic_address xpm1b_control_block;	/* 64-bit Extended Power Mgt 1b Control Reg Blk address */
+	struct acpi_generic_address xpm2_control_block;	/* 64-bit Extended Power Mgt 2 Control Reg Blk address */
+	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
+	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */
+	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */
+	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register (ACPI 5.0) */
+	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register (ACPI 5.0) */
+	u64 hypervisor_id;	/* Hypervisor Vendor ID (ACPI 6.0) */
+};
+
+/* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
+
+#define ACPI_FADT_LEGACY_DEVICES    (1)  	/* 00: [V2] System has LPC or ISA bus devices */
+#define ACPI_FADT_8042              (1<<1)	/* 01: [V3] System has an 8042 controller on port 60/64 */
+#define ACPI_FADT_NO_VGA            (1<<2)	/* 02: [V4] It is not safe to probe for VGA hardware */
+#define ACPI_FADT_NO_MSI            (1<<3)	/* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
+#define ACPI_FADT_NO_ASPM           (1<<4)	/* 04: [V4] PCIe ASPM control must not be enabled */
+#define ACPI_FADT_NO_CMOS_RTC       (1<<5)	/* 05: [V5] No CMOS real-time clock present */
+
+#define FADT2_REVISION_ID               3
+
+/* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */
+
+#define ACPI_FADT_PSCI_COMPLIANT    (1)	/* 00: [V5+] PSCI 0.2+ is implemented */
+#define ACPI_FADT_PSCI_USE_HVC      (1<<1)	/* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */
+
+/* Masks for FADT flags */
+
+#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The WBINVD instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] WBINVD flushes but does not invalidate caches */
+#define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: [V1] All processors support C1 state */
+#define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: [V1] C2 state works on MP system */
+#define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: [V1] Power button is handled as a control method device */
+#define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: [V1] Sleep button is handled as a control method device */
+#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status is not in fixed register space */
+#define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: [V1] RTC alarm can wake system from S4 */
+#define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
+#define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: [V1] Docking supported */
+#define ACPI_FADT_RESET_REGISTER    (1<<10)	/* 10: [V2] System reset via the FADT RESET_REG supported */
+#define ACPI_FADT_SEALED_CASE       (1<<11)	/* 11: [V3] No internal expansion capabilities and case is sealed */
+#define ACPI_FADT_HEADLESS          (1<<12)	/* 12: [V3] No local video capabilities or local input devices */
+#define ACPI_FADT_SLEEP_TYPE        (1<<13)	/* 13: [V3] Must execute native instruction after writing  SLP_TYPx register */
+#define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14)	/* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
+#define ACPI_FADT_PLATFORM_CLOCK    (1<<15)	/* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
+#define ACPI_FADT_S4_RTC_VALID      (1<<16)	/* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
+#define ACPI_FADT_REMOTE_POWER_ON   (1<<17)	/* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
+#define ACPI_FADT_APIC_CLUSTER      (1<<18)	/* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL     (1<<19)	/* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
+#define ACPI_FADT_HW_REDUCED        (1<<20)	/* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
+#define ACPI_FADT_LOW_POWER_S0      (1<<21)	/* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
+
+/* Values for preferred_profile (Preferred Power Management Profiles) */
+
+enum acpi_preferred_pm_profiles {
+	PM_UNSPECIFIED = 0,
+	PM_DESKTOP = 1,
+	PM_MOBILE = 2,
+	PM_WORKSTATION = 3,
+	PM_ENTERPRISE_SERVER = 4,
+	PM_SOHO_SERVER = 5,
+	PM_APPLIANCE_PC = 6,
+	PM_PERFORMANCE_SERVER = 7,
+	PM_TABLET = 8
+};
+
+/* Values for sleep_status and sleep_control registers (V5+ FADT) */
+
+#define ACPI_X_WAKE_STATUS          0x80
+#define ACPI_X_SLEEP_TYPE_MASK      0x1C
+#define ACPI_X_SLEEP_TYPE_POSITION  0x02
+#define ACPI_X_SLEEP_ENABLE         0x20
+
+/* Reset to default packing */
+
+#pragma pack()
+
+/*
+ * Internal table-related structures
+ */
+union acpi_name_union {
+	u32 integer;
+	char ascii[4];
+};
+
+/* Internal ACPI Table Descriptor. One per ACPI table. */
+
+struct acpi_table_desc {
+	acpi_physical_address address;
+	struct acpi_table_header *pointer;
+	u32 length;		/* Length fixed at 32 bits (fixed in table header) */
+	union acpi_name_union signature;
+	acpi_owner_id owner_id;
+	u8 flags;
+	u16 validation_count;
+};
+
+/*
+ * Maximum value of the validation_count field in struct acpi_table_desc.
+ * When reached, validation_count cannot be changed any more and the table will
+ * be permanently regarded as validated.
+ *
+ * This is to prevent situations in which unbalanced table get/put operations
+ * may cause premature table unmapping in the OS to happen.
+ *
+ * The maximum validation count can be defined to any value, but should be
+ * greater than the maximum number of OS early stage mapping slots to avoid
+ * leaking early stage table mappings to the late stage.
+ */
+#define ACPI_MAX_TABLE_VALIDATIONS          ACPI_UINT16_MAX
+
+/* Masks for Flags field above */
+
+#define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL  (0)	/* Virtual address, external maintained */
+#define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1)	/* Physical address, internally mapped */
+#define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL  (2)	/* Virtual address, internallly allocated */
+#define ACPI_TABLE_ORIGIN_MASK              (3)
+#define ACPI_TABLE_IS_VERIFIED              (4)
+#define ACPI_TABLE_IS_LOADED                (8)
+
+/*
+ * Get the remaining ACPI tables
+ */
+#include <acpi/actbl1.h>
+#include <acpi/actbl2.h>
+#include <acpi/actbl3.h>
+
+/* Macros used to generate offsets to specific table fields */
+
+#define ACPI_FADT_OFFSET(f)             (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
+
+/*
+ * Sizes of the various flavors of FADT. We need to look closely
+ * at the FADT length because the version number essentially tells
+ * us nothing because of many BIOS bugs where the version does not
+ * match the expected length. In other words, the length of the
+ * FADT is the bottom line as to what the version really is.
+ *
+ * For reference, the values below are as follows:
+ *     FADT V1 size: 0x074
+ *     FADT V2 size: 0x084
+ *     FADT V3 size: 0x0F4
+ *     FADT V4 size: 0x0F4
+ *     FADT V5 size: 0x10C
+ *     FADT V6 size: 0x114
+ */
+#define ACPI_FADT_V1_SIZE       (u32) (ACPI_FADT_OFFSET (flags) + 4)
+#define ACPI_FADT_V2_SIZE       (u32) (ACPI_FADT_OFFSET (minor_revision) + 1)
+#define ACPI_FADT_V3_SIZE       (u32) (ACPI_FADT_OFFSET (sleep_control))
+#define ACPI_FADT_V5_SIZE       (u32) (ACPI_FADT_OFFSET (hypervisor_id))
+#define ACPI_FADT_V6_SIZE       (u32) (sizeof (struct acpi_table_fadt))
+
+#define ACPI_FADT_CONFORMANCE   "ACPI 6.1 (FADT version 6)"
+
+#endif				/* __ACTBL_H__ */