Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 778 insertions, 0 deletions

diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
new file mode 100644
index 000000000..832c6464f
--- /dev/null
+++ b/include/acpi/actbl3.h
@@ -0,0 +1,778 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
+/******************************************************************************
+ *
+ * Name: actbl3.h - ACPI Table Definitions
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#ifndef __ACTBL3_H__
+#define __ACTBL3_H__
+
+/*******************************************************************************
+ *
+ * Additional ACPI Tables
+ *
+ * These tables are not consumed directly by the ACPICA subsystem, but are
+ * included here to support device drivers and the AML disassembler.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_SLIC           "SLIC"	/* Software Licensing Description Table */
+#define ACPI_SIG_SLIT           "SLIT"	/* System Locality Distance Information Table */
+#define ACPI_SIG_SPCR           "SPCR"	/* Serial Port Console Redirection table */
+#define ACPI_SIG_SPMI           "SPMI"	/* Server Platform Management Interface table */
+#define ACPI_SIG_SRAT           "SRAT"	/* System Resource Affinity Table */
+#define ACPI_SIG_STAO           "STAO"	/* Status Override table */
+#define ACPI_SIG_TCPA           "TCPA"	/* Trusted Computing Platform Alliance table */
+#define ACPI_SIG_TPM2           "TPM2"	/* Trusted Platform Module 2.0 H/W interface table */
+#define ACPI_SIG_UEFI           "UEFI"	/* Uefi Boot Optimization Table */
+#define ACPI_SIG_VIOT           "VIOT"	/* Virtual I/O Translation Table */
+#define ACPI_SIG_WAET           "WAET"	/* Windows ACPI Emulated devices Table */
+#define ACPI_SIG_WDAT           "WDAT"	/* Watchdog Action Table */
+#define ACPI_SIG_WDDT           "WDDT"	/* Watchdog Timer Description Table */
+#define ACPI_SIG_WDRT           "WDRT"	/* Watchdog Resource Table */
+#define ACPI_SIG_WPBT           "WPBT"	/* Windows Platform Binary Table */
+#define ACPI_SIG_WSMT           "WSMT"	/* Windows SMM Security Mitigations Table */
+#define ACPI_SIG_XENV           "XENV"	/* Xen Environment table */
+#define ACPI_SIG_XXXX           "XXXX"	/* Intermediate AML header for ASL/ASL+ converter */
+
+/*
+ * All tables must be byte-packed to match the ACPI specification, since
+ * the tables are provided by the system BIOS.
+ */
+#pragma pack(1)
+
+/*
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
+ */
+
+/*******************************************************************************
+ *
+ * SLIC - Software Licensing Description Table
+ *
+ * Conforms to "Microsoft Software Licensing Tables (SLIC and MSDM)",
+ * November 29, 2011. Copyright 2011 Microsoft
+ *
+ ******************************************************************************/
+
+/* Basic SLIC table is only the common ACPI header */
+
+struct acpi_table_slic {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/*******************************************************************************
+ *
+ * SLIT - System Locality Distance Information Table
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_slit {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 locality_count;
+	u8 entry[1];		/* Real size = localities^2 */
+};
+
+/*******************************************************************************
+ *
+ * SPCR - Serial Port Console Redirection table
+ *        Version 2
+ *
+ * Conforms to "Serial Port Console Redirection Table",
+ * Version 1.03, August 10, 2015
+ *
+ ******************************************************************************/
+
+struct acpi_table_spcr {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;	/* 0=full 16550, 1=subset of 16550 */
+	u8 reserved[3];
+	struct acpi_generic_address serial_port;
+	u8 interrupt_type;
+	u8 pc_interrupt;
+	u32 interrupt;
+	u8 baud_rate;
+	u8 parity;
+	u8 stop_bits;
+	u8 flow_control;
+	u8 terminal_type;
+	u8 reserved1;
+	u16 pci_device_id;
+	u16 pci_vendor_id;
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+	u32 pci_flags;
+	u8 pci_segment;
+	u32 reserved2;
+};
+
+/* Masks for pci_flags field above */
+
+#define ACPI_SPCR_DO_NOT_DISABLE    (1)
+
+/* Values for Interface Type: See the definition of the DBG2 table */
+
+/*******************************************************************************
+ *
+ * SPMI - Server Platform Management Interface table
+ *        Version 5
+ *
+ * Conforms to "Intelligent Platform Management Interface Specification
+ * Second Generation v2.0", Document Revision 1.0, February 12, 2004 with
+ * June 12, 2009 markup.
+ *
+ ******************************************************************************/
+
+struct acpi_table_spmi {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;
+	u8 reserved;		/* Must be 1 */
+	u16 spec_revision;	/* Version of IPMI */
+	u8 interrupt_type;
+	u8 gpe_number;		/* GPE assigned */
+	u8 reserved1;
+	u8 pci_device_flag;
+	u32 interrupt;
+	struct acpi_generic_address ipmi_register;
+	u8 pci_segment;
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+	u8 reserved2;
+};
+
+/* Values for interface_type above */
+
+enum acpi_spmi_interface_types {
+	ACPI_SPMI_NOT_USED = 0,
+	ACPI_SPMI_KEYBOARD = 1,
+	ACPI_SPMI_SMI = 2,
+	ACPI_SPMI_BLOCK_TRANSFER = 3,
+	ACPI_SPMI_SMBUS = 4,
+	ACPI_SPMI_RESERVED = 5	/* 5 and above are reserved */
+};
+
+/*******************************************************************************
+ *
+ * SRAT - System Resource Affinity Table
+ *        Version 3
+ *
+ ******************************************************************************/
+
+struct acpi_table_srat {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 table_revision;	/* Must be value '1' */
+	u64 reserved;		/* Reserved, must be zero */
+};
+
+/* Values for subtable type in struct acpi_subtable_header */
+
+enum acpi_srat_type {
+	ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
+	ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
+	ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2,
+	ACPI_SRAT_TYPE_GICC_AFFINITY = 3,
+	ACPI_SRAT_TYPE_GIC_ITS_AFFINITY = 4,	/* ACPI 6.2 */
+	ACPI_SRAT_TYPE_GENERIC_AFFINITY = 5,	/* ACPI 6.3 */
+	ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY = 6,	/* ACPI 6.4 */
+	ACPI_SRAT_TYPE_RESERVED = 7	/* 7 and greater are reserved */
+};
+
+/*
+ * SRAT Subtables, correspond to Type in struct acpi_subtable_header
+ */
+
+/* 0: Processor Local APIC/SAPIC Affinity */
+
+struct acpi_srat_cpu_affinity {
+	struct acpi_subtable_header header;
+	u8 proximity_domain_lo;
+	u8 apic_id;
+	u32 flags;
+	u8 local_sapic_eid;
+	u8 proximity_domain_hi[3];
+	u32 clock_domain;
+};
+
+/* Flags */
+
+#define ACPI_SRAT_CPU_USE_AFFINITY  (1)	/* 00: Use affinity structure */
+
+/* 1: Memory Affinity */
+
+struct acpi_srat_mem_affinity {
+	struct acpi_subtable_header header;
+	u32 proximity_domain;
+	u16 reserved;		/* Reserved, must be zero */
+	u64 base_address;
+	u64 length;
+	u32 reserved1;
+	u32 flags;
+	u64 reserved2;		/* Reserved, must be zero */
+};
+
+/* Flags */
+
+#define ACPI_SRAT_MEM_ENABLED       (1)	/* 00: Use affinity structure */
+#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1)	/* 01: Memory region is hot pluggable */
+#define ACPI_SRAT_MEM_NON_VOLATILE  (1<<2)	/* 02: Memory region is non-volatile */
+
+/* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */
+
+struct acpi_srat_x2apic_cpu_affinity {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved, must be zero */
+	u32 proximity_domain;
+	u32 apic_id;
+	u32 flags;
+	u32 clock_domain;
+	u32 reserved2;
+};
+
+/* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */
+
+#define ACPI_SRAT_CPU_ENABLED       (1)	/* 00: Use affinity structure */
+
+/* 3: GICC Affinity (ACPI 5.1) */
+
+struct acpi_srat_gicc_affinity {
+	struct acpi_subtable_header header;
+	u32 proximity_domain;
+	u32 acpi_processor_uid;
+	u32 flags;
+	u32 clock_domain;
+};
+
+/* Flags for struct acpi_srat_gicc_affinity */
+
+#define ACPI_SRAT_GICC_ENABLED     (1)	/* 00: Use affinity structure */
+
+/* 4: GCC ITS Affinity (ACPI 6.2) */
+
+struct acpi_srat_gic_its_affinity {
+	struct acpi_subtable_header header;
+	u32 proximity_domain;
+	u16 reserved;
+	u32 its_id;
+};
+
+/*
+ * Common structure for SRAT subtable types:
+ * 5: ACPI_SRAT_TYPE_GENERIC_AFFINITY
+ * 6: ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY
+ */
+
+struct acpi_srat_generic_affinity {
+	struct acpi_subtable_header header;
+	u8 reserved;
+	u8 device_handle_type;
+	u32 proximity_domain;
+	u8 device_handle[16];
+	u32 flags;
+	u32 reserved1;
+};
+
+/* Flags for struct acpi_srat_generic_affinity */
+
+#define ACPI_SRAT_GENERIC_AFFINITY_ENABLED     (1)	/* 00: Use affinity structure */
+#define ACPI_SRAT_ARCHITECTURAL_TRANSACTIONS   (1<<1)	/* ACPI 6.4 */
+
+/*******************************************************************************
+ *
+ * STAO - Status Override Table (_STA override) - ACPI 6.0
+ *        Version 1
+ *
+ * Conforms to "ACPI Specification for Status Override Table"
+ * 6 January 2015
+ *
+ ******************************************************************************/
+
+struct acpi_table_stao {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 ignore_uart;
+};
+
+/*******************************************************************************
+ *
+ * TCPA - Trusted Computing Platform Alliance table
+ *        Version 2
+ *
+ * TCG Hardware Interface Table for TPM 1.2 Clients and Servers
+ *
+ * Conforms to "TCG ACPI Specification, Family 1.2 and 2.0",
+ * Version 1.2, Revision 8
+ * February 27, 2017
+ *
+ * NOTE: There are two versions of the table with the same signature --
+ * the client version and the server version. The common platform_class
+ * field is used to differentiate the two types of tables.
+ *
+ ******************************************************************************/
+
+struct acpi_table_tcpa_hdr {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 platform_class;
+};
+
+/*
+ * Values for platform_class above.
+ * This is how the client and server subtables are differentiated
+ */
+#define ACPI_TCPA_CLIENT_TABLE          0
+#define ACPI_TCPA_SERVER_TABLE          1
+
+struct acpi_table_tcpa_client {
+	u32 minimum_log_length;	/* Minimum length for the event log area */
+	u64 log_address;	/* Address of the event log area */
+};
+
+struct acpi_table_tcpa_server {
+	u16 reserved;
+	u64 minimum_log_length;	/* Minimum length for the event log area */
+	u64 log_address;	/* Address of the event log area */
+	u16 spec_revision;
+	u8 device_flags;
+	u8 interrupt_flags;
+	u8 gpe_number;
+	u8 reserved2[3];
+	u32 global_interrupt;
+	struct acpi_generic_address address;
+	u32 reserved3;
+	struct acpi_generic_address config_address;
+	u8 group;
+	u8 bus;			/* PCI Bus/Segment/Function numbers */
+	u8 device;
+	u8 function;
+};
+
+/* Values for device_flags above */
+
+#define ACPI_TCPA_PCI_DEVICE            (1)
+#define ACPI_TCPA_BUS_PNP               (1<<1)
+#define ACPI_TCPA_ADDRESS_VALID         (1<<2)
+
+/* Values for interrupt_flags above */
+
+#define ACPI_TCPA_INTERRUPT_MODE        (1)
+#define ACPI_TCPA_INTERRUPT_POLARITY    (1<<1)
+#define ACPI_TCPA_SCI_VIA_GPE           (1<<2)
+#define ACPI_TCPA_GLOBAL_INTERRUPT      (1<<3)
+
+/*******************************************************************************
+ *
+ * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table
+ *        Version 4
+ *
+ * TCG Hardware Interface Table for TPM 2.0 Clients and Servers
+ *
+ * Conforms to "TCG ACPI Specification, Family 1.2 and 2.0",
+ * Version 1.2, Revision 8
+ * February 27, 2017
+ *
+ ******************************************************************************/
+
+/* Revision 3 */
+
+struct acpi_table_tpm23 {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 reserved;
+	u64 control_address;
+	u32 start_method;
+};
+
+/* Value for start_method above */
+
+#define ACPI_TPM23_ACPI_START_METHOD                 2
+
+/*
+ * Optional trailer for revision 3. If start method is 2, there is a 4 byte
+ * reserved area of all zeros.
+ */
+struct acpi_tmp23_trailer {
+	u32 reserved;
+};
+
+/* Revision 4 */
+
+struct acpi_table_tpm2 {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 platform_class;
+	u16 reserved;
+	u64 control_address;
+	u32 start_method;
+
+	/* Platform-specific data follows */
+};
+
+/* Optional trailer for revision 4 holding platform-specific data */
+struct acpi_tpm2_phy {
+	u8  start_method_specific[12];
+	u32 log_area_minimum_length;
+	u64 log_area_start_address;
+};
+
+/* Values for start_method above */
+
+#define ACPI_TPM2_NOT_ALLOWED                       0
+#define ACPI_TPM2_RESERVED1                         1
+#define ACPI_TPM2_START_METHOD                      2
+#define ACPI_TPM2_RESERVED3                         3
+#define ACPI_TPM2_RESERVED4                         4
+#define ACPI_TPM2_RESERVED5                         5
+#define ACPI_TPM2_MEMORY_MAPPED                     6
+#define ACPI_TPM2_COMMAND_BUFFER                    7
+#define ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD  8
+#define ACPI_TPM2_RESERVED9                         9
+#define ACPI_TPM2_RESERVED10                        10
+#define ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC       11	/* V1.2 Rev 8 */
+#define ACPI_TPM2_RESERVED                          12
+#define ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON        13
+
+/* Optional trailer appears after any start_method subtables */
+
+struct acpi_tpm2_trailer {
+	u8 method_parameters[12];
+	u32 minimum_log_length;	/* Minimum length for the event log area */
+	u64 log_address;	/* Address of the event log area */
+};
+
+/*
+ * Subtables (start_method-specific)
+ */
+
+/* 11: Start Method for ARM SMC (V1.2 Rev 8) */
+
+struct acpi_tpm2_arm_smc {
+	u32 global_interrupt;
+	u8 interrupt_flags;
+	u8 operation_flags;
+	u16 reserved;
+	u32 function_id;
+};
+
+/* Values for interrupt_flags above */
+
+#define ACPI_TPM2_INTERRUPT_SUPPORT     (1)
+
+/* Values for operation_flags above */
+
+#define ACPI_TPM2_IDLE_SUPPORT          (1)
+
+/*******************************************************************************
+ *
+ * UEFI - UEFI Boot optimization Table
+ *        Version 1
+ *
+ * Conforms to "Unified Extensible Firmware Interface Specification",
+ * Version 2.3, May 8, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_uefi {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 identifier[16];	/* UUID identifier */
+	u16 data_offset;	/* Offset of remaining data in table */
+};
+
+/*******************************************************************************
+ *
+ * VIOT - Virtual I/O Translation Table
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_viot {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 node_count;
+	u16 node_offset;
+	u8 reserved[8];
+};
+
+/* VIOT subtable header */
+
+struct acpi_viot_header {
+	u8 type;
+	u8 reserved;
+	u16 length;
+};
+
+/* Values for Type field above */
+
+enum acpi_viot_node_type {
+	ACPI_VIOT_NODE_PCI_RANGE = 0x01,
+	ACPI_VIOT_NODE_MMIO = 0x02,
+	ACPI_VIOT_NODE_VIRTIO_IOMMU_PCI = 0x03,
+	ACPI_VIOT_NODE_VIRTIO_IOMMU_MMIO = 0x04,
+	ACPI_VIOT_RESERVED = 0x05
+};
+
+/* VIOT subtables */
+
+struct acpi_viot_pci_range {
+	struct acpi_viot_header header;
+	u32 endpoint_start;
+	u16 segment_start;
+	u16 segment_end;
+	u16 bdf_start;
+	u16 bdf_end;
+	u16 output_node;
+	u8 reserved[6];
+};
+
+struct acpi_viot_mmio {
+	struct acpi_viot_header header;
+	u32 endpoint;
+	u64 base_address;
+	u16 output_node;
+	u8 reserved[6];
+};
+
+struct acpi_viot_virtio_iommu_pci {
+	struct acpi_viot_header header;
+	u16 segment;
+	u16 bdf;
+	u8 reserved[8];
+};
+
+struct acpi_viot_virtio_iommu_mmio {
+	struct acpi_viot_header header;
+	u8 reserved[4];
+	u64 base_address;
+};
+
+/*******************************************************************************
+ *
+ * WAET - Windows ACPI Emulated devices Table
+ *        Version 1
+ *
+ * Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_waet {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WAET_RTC_NO_ACK        (1)	/* RTC requires no int acknowledge */
+#define ACPI_WAET_TIMER_ONE_READ    (1<<1)	/* PM timer requires only one read */
+
+/*******************************************************************************
+ *
+ * WDAT - Watchdog Action Table
+ *        Version 1
+ *
+ * Conforms to "Hardware Watchdog Timers Design Specification",
+ * Copyright 2006 Microsoft Corporation.
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdat {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 header_length;	/* Watchdog Header Length */
+	u16 pci_segment;	/* PCI Segment number */
+	u8 pci_bus;		/* PCI Bus number */
+	u8 pci_device;		/* PCI Device number */
+	u8 pci_function;	/* PCI Function number */
+	u8 reserved[3];
+	u32 timer_period;	/* Period of one timer count (msec) */
+	u32 max_count;		/* Maximum counter value supported */
+	u32 min_count;		/* Minimum counter value */
+	u8 flags;
+	u8 reserved2[3];
+	u32 entries;		/* Number of watchdog entries that follow */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WDAT_ENABLED           (1)
+#define ACPI_WDAT_STOPPED           0x80
+
+/* WDAT Instruction Entries (actions) */
+
+struct acpi_wdat_entry {
+	u8 action;
+	u8 instruction;
+	u16 reserved;
+	struct acpi_generic_address register_region;
+	u32 value;		/* Value used with Read/Write register */
+	u32 mask;		/* Bitmask required for this register instruction */
+};
+
+/* Values for Action field above */
+
+enum acpi_wdat_actions {
+	ACPI_WDAT_RESET = 1,
+	ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
+	ACPI_WDAT_GET_COUNTDOWN = 5,
+	ACPI_WDAT_SET_COUNTDOWN = 6,
+	ACPI_WDAT_GET_RUNNING_STATE = 8,
+	ACPI_WDAT_SET_RUNNING_STATE = 9,
+	ACPI_WDAT_GET_STOPPED_STATE = 10,
+	ACPI_WDAT_SET_STOPPED_STATE = 11,
+	ACPI_WDAT_GET_REBOOT = 16,
+	ACPI_WDAT_SET_REBOOT = 17,
+	ACPI_WDAT_GET_SHUTDOWN = 18,
+	ACPI_WDAT_SET_SHUTDOWN = 19,
+	ACPI_WDAT_GET_STATUS = 32,
+	ACPI_WDAT_SET_STATUS = 33,
+	ACPI_WDAT_ACTION_RESERVED = 34	/* 34 and greater are reserved */
+};
+
+/* Values for Instruction field above */
+
+enum acpi_wdat_instructions {
+	ACPI_WDAT_READ_VALUE = 0,
+	ACPI_WDAT_READ_COUNTDOWN = 1,
+	ACPI_WDAT_WRITE_VALUE = 2,
+	ACPI_WDAT_WRITE_COUNTDOWN = 3,
+	ACPI_WDAT_INSTRUCTION_RESERVED = 4,	/* 4 and greater are reserved */
+	ACPI_WDAT_PRESERVE_REGISTER = 0x80	/* Except for this value */
+};
+
+/*******************************************************************************
+ *
+ * WDDT - Watchdog Descriptor Table
+ *        Version 1
+ *
+ * Conforms to "Using the Intel ICH Family Watchdog Timer (WDT)",
+ * Version 001, September 2002
+ *
+ ******************************************************************************/
+
+struct acpi_table_wddt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 spec_version;
+	u16 table_version;
+	u16 pci_vendor_id;
+	struct acpi_generic_address address;
+	u16 max_count;		/* Maximum counter value supported */
+	u16 min_count;		/* Minimum counter value supported */
+	u16 period;
+	u16 status;
+	u16 capability;
+};
+
+/* Flags for Status field above */
+
+#define ACPI_WDDT_AVAILABLE     (1)
+#define ACPI_WDDT_ACTIVE        (1<<1)
+#define ACPI_WDDT_TCO_OS_OWNED  (1<<2)
+#define ACPI_WDDT_USER_RESET    (1<<11)
+#define ACPI_WDDT_WDT_RESET     (1<<12)
+#define ACPI_WDDT_POWER_FAIL    (1<<13)
+#define ACPI_WDDT_UNKNOWN_RESET (1<<14)
+
+/* Flags for Capability field above */
+
+#define ACPI_WDDT_AUTO_RESET    (1)
+#define ACPI_WDDT_ALERT_SUPPORT (1<<1)
+
+/*******************************************************************************
+ *
+ * WDRT - Watchdog Resource Table
+ *        Version 1
+ *
+ * Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003",
+ * Version 1.01, August 28, 2006
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdrt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	struct acpi_generic_address control_register;
+	struct acpi_generic_address count_register;
+	u16 pci_device_id;
+	u16 pci_vendor_id;
+	u8 pci_bus;		/* PCI Bus number */
+	u8 pci_device;		/* PCI Device number */
+	u8 pci_function;	/* PCI Function number */
+	u8 pci_segment;		/* PCI Segment number */
+	u16 max_count;		/* Maximum counter value supported */
+	u8 units;
+};
+
+/*******************************************************************************
+ *
+ * WPBT - Windows Platform Environment Table (ACPI 6.0)
+ *        Version 1
+ *
+ * Conforms to "Windows Platform Binary Table (WPBT)" 29 November 2011
+ *
+ ******************************************************************************/
+
+struct acpi_table_wpbt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 handoff_size;
+	u64 handoff_address;
+	u8 layout;
+	u8 type;
+	u16 arguments_length;
+};
+
+struct acpi_wpbt_unicode {
+	u16 *unicode_string;
+};
+
+/*******************************************************************************
+ *
+ * WSMT - Windows SMM Security Mitigations Table
+ *        Version 1
+ *
+ * Conforms to "Windows SMM Security Mitigations Table",
+ * Version 1.0, April 18, 2016
+ *
+ ******************************************************************************/
+
+struct acpi_table_wsmt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 protection_flags;
+};
+
+/* Flags for protection_flags field above */
+
+#define ACPI_WSMT_FIXED_COMM_BUFFERS                (1)
+#define ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION (2)
+#define ACPI_WSMT_SYSTEM_RESOURCE_PROTECTION        (4)
+
+/*******************************************************************************
+ *
+ * XENV - Xen Environment Table (ACPI 6.0)
+ *        Version 1
+ *
+ * Conforms to "ACPI Specification for Xen Environment Table" 4 January 2015
+ *
+ ******************************************************************************/
+
+struct acpi_table_xenv {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 grant_table_address;
+	u64 grant_table_size;
+	u32 event_interrupt;
+	u8 event_flags;
+};
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#endif				/* __ACTBL3_H__ */