Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 203 insertions, 0 deletions

diff --git a/include/crypto/rng.h b/include/crypto/rng.h
new file mode 100644
index 000000000..17bb3673d
--- /dev/null
+++ b/include/crypto/rng.h
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * RNG: Random Number Generator  algorithms under the crypto API
+ *
+ * Copyright (c) 2008 Neil Horman <nhorman@tuxdriver.com>
+ * Copyright (c) 2015 Herbert Xu <herbert@gondor.apana.org.au>
+ */
+
+#ifndef _CRYPTO_RNG_H
+#define _CRYPTO_RNG_H
+
+#include <linux/crypto.h>
+
+struct crypto_rng;
+
+/**
+ * struct rng_alg - random number generator definition
+ *
+ * @generate:	The function defined by this variable obtains a
+ *		random number. The random number generator transform
+ *		must generate the random number out of the context
+ *		provided with this call, plus any additional data
+ *		if provided to the call.
+ * @seed:	Seed or reseed the random number generator.  With the
+ *		invocation of this function call, the random number
+ *		generator shall become ready for generation.  If the
+ *		random number generator requires a seed for setting
+ *		up a new state, the seed must be provided by the
+ *		consumer while invoking this function. The required
+ *		size of the seed is defined with @seedsize .
+ * @set_ent:	Set entropy that would otherwise be obtained from
+ *		entropy source.  Internal use only.
+ * @seedsize:	The seed size required for a random number generator
+ *		initialization defined with this variable. Some
+ *		random number generators does not require a seed
+ *		as the seeding is implemented internally without
+ *		the need of support by the consumer. In this case,
+ *		the seed size is set to zero.
+ * @base:	Common crypto API algorithm data structure.
+ */
+struct rng_alg {
+	int (*generate)(struct crypto_rng *tfm,
+			const u8 *src, unsigned int slen,
+			u8 *dst, unsigned int dlen);
+	int (*seed)(struct crypto_rng *tfm, const u8 *seed, unsigned int slen);
+	void (*set_ent)(struct crypto_rng *tfm, const u8 *data,
+			unsigned int len);
+
+	unsigned int seedsize;
+
+	struct crypto_alg base;
+};
+
+struct crypto_rng {
+	struct crypto_tfm base;
+};
+
+extern struct crypto_rng *crypto_default_rng;
+
+int crypto_get_default_rng(void);
+void crypto_put_default_rng(void);
+
+/**
+ * DOC: Random number generator API
+ *
+ * The random number generator API is used with the ciphers of type
+ * CRYPTO_ALG_TYPE_RNG (listed as type "rng" in /proc/crypto)
+ */
+
+/**
+ * crypto_alloc_rng() -- allocate RNG handle
+ * @alg_name: is the cra_name / name or cra_driver_name / driver name of the
+ *	      message digest cipher
+ * @type: specifies the type of the cipher
+ * @mask: specifies the mask for the cipher
+ *
+ * Allocate a cipher handle for a random number generator. The returned struct
+ * crypto_rng is the cipher handle that is required for any subsequent
+ * API invocation for that random number generator.
+ *
+ * For all random number generators, this call creates a new private copy of
+ * the random number generator that does not share a state with other
+ * instances. The only exception is the "krng" random number generator which
+ * is a kernel crypto API use case for the get_random_bytes() function of the
+ * /dev/random driver.
+ *
+ * Return: allocated cipher handle in case of success; IS_ERR() is true in case
+ *	   of an error, PTR_ERR() returns the error code.
+ */
+struct crypto_rng *crypto_alloc_rng(const char *alg_name, u32 type, u32 mask);
+
+static inline struct crypto_tfm *crypto_rng_tfm(struct crypto_rng *tfm)
+{
+	return &tfm->base;
+}
+
+/**
+ * crypto_rng_alg - obtain name of RNG
+ * @tfm: cipher handle
+ *
+ * Return the generic name (cra_name) of the initialized random number generator
+ *
+ * Return: generic name string
+ */
+static inline struct rng_alg *crypto_rng_alg(struct crypto_rng *tfm)
+{
+	return container_of(crypto_rng_tfm(tfm)->__crt_alg,
+			    struct rng_alg, base);
+}
+
+/**
+ * crypto_free_rng() - zeroize and free RNG handle
+ * @tfm: cipher handle to be freed
+ *
+ * If @tfm is a NULL or error pointer, this function does nothing.
+ */
+static inline void crypto_free_rng(struct crypto_rng *tfm)
+{
+	crypto_destroy_tfm(tfm, crypto_rng_tfm(tfm));
+}
+
+/**
+ * crypto_rng_generate() - get random number
+ * @tfm: cipher handle
+ * @src: Input buffer holding additional data, may be NULL
+ * @slen: Length of additional data
+ * @dst: output buffer holding the random numbers
+ * @dlen: length of the output buffer
+ *
+ * This function fills the caller-allocated buffer with random
+ * numbers using the random number generator referenced by the
+ * cipher handle.
+ *
+ * Return: 0 function was successful; < 0 if an error occurred
+ */
+static inline int crypto_rng_generate(struct crypto_rng *tfm,
+				      const u8 *src, unsigned int slen,
+				      u8 *dst, unsigned int dlen)
+{
+	struct crypto_alg *alg = tfm->base.__crt_alg;
+	int ret;
+
+	crypto_stats_get(alg);
+	ret = crypto_rng_alg(tfm)->generate(tfm, src, slen, dst, dlen);
+	crypto_stats_rng_generate(alg, dlen, ret);
+	return ret;
+}
+
+/**
+ * crypto_rng_get_bytes() - get random number
+ * @tfm: cipher handle
+ * @rdata: output buffer holding the random numbers
+ * @dlen: length of the output buffer
+ *
+ * This function fills the caller-allocated buffer with random numbers using the
+ * random number generator referenced by the cipher handle.
+ *
+ * Return: 0 function was successful; < 0 if an error occurred
+ */
+static inline int crypto_rng_get_bytes(struct crypto_rng *tfm,
+				       u8 *rdata, unsigned int dlen)
+{
+	return crypto_rng_generate(tfm, NULL, 0, rdata, dlen);
+}
+
+/**
+ * crypto_rng_reset() - re-initialize the RNG
+ * @tfm: cipher handle
+ * @seed: seed input data
+ * @slen: length of the seed input data
+ *
+ * The reset function completely re-initializes the random number generator
+ * referenced by the cipher handle by clearing the current state. The new state
+ * is initialized with the caller provided seed or automatically, depending
+ * on the random number generator type (the ANSI X9.31 RNG requires
+ * caller-provided seed, the SP800-90A DRBGs perform an automatic seeding).
+ * The seed is provided as a parameter to this function call. The provided seed
+ * should have the length of the seed size defined for the random number
+ * generator as defined by crypto_rng_seedsize.
+ *
+ * Return: 0 if the setting of the key was successful; < 0 if an error occurred
+ */
+int crypto_rng_reset(struct crypto_rng *tfm, const u8 *seed,
+		     unsigned int slen);
+
+/**
+ * crypto_rng_seedsize() - obtain seed size of RNG
+ * @tfm: cipher handle
+ *
+ * The function returns the seed size for the random number generator
+ * referenced by the cipher handle. This value may be zero if the random
+ * number generator does not implement or require a reseeding. For example,
+ * the SP800-90A DRBGs implement an automated reseeding after reaching a
+ * pre-defined threshold.
+ *
+ * Return: seed size for the random number generator
+ */
+static inline int crypto_rng_seedsize(struct crypto_rng *tfm)
+{
+	return crypto_rng_alg(tfm)->seedsize;
+}
+
+#endif