Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 377 insertions, 0 deletions

diff --git a/include/drm/bridge/mhl.h b/include/drm/bridge/mhl.h
new file mode 100644
index 000000000..d96626a0e
--- /dev/null
+++ b/include/drm/bridge/mhl.h
@@ -0,0 +1,377 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Defines for Mobile High-Definition Link (MHL) interface
+ *
+ * Copyright (C) 2015, Samsung Electronics, Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * Based on MHL driver for Android devices.
+ * Copyright (C) 2013-2014 Silicon Image, Inc.
+ */
+
+#ifndef __MHL_H__
+#define __MHL_H__
+
+#include <linux/types.h>
+
+/* Device Capabilities Registers */
+enum {
+	MHL_DCAP_DEV_STATE,
+	MHL_DCAP_MHL_VERSION,
+	MHL_DCAP_CAT,
+	MHL_DCAP_ADOPTER_ID_H,
+	MHL_DCAP_ADOPTER_ID_L,
+	MHL_DCAP_VID_LINK_MODE,
+	MHL_DCAP_AUD_LINK_MODE,
+	MHL_DCAP_VIDEO_TYPE,
+	MHL_DCAP_LOG_DEV_MAP,
+	MHL_DCAP_BANDWIDTH,
+	MHL_DCAP_FEATURE_FLAG,
+	MHL_DCAP_DEVICE_ID_H,
+	MHL_DCAP_DEVICE_ID_L,
+	MHL_DCAP_SCRATCHPAD_SIZE,
+	MHL_DCAP_INT_STAT_SIZE,
+	MHL_DCAP_RESERVED,
+	MHL_DCAP_SIZE
+};
+
+#define MHL_DCAP_CAT_SINK			0x01
+#define MHL_DCAP_CAT_SOURCE			0x02
+#define MHL_DCAP_CAT_POWER			0x10
+#define MHL_DCAP_CAT_PLIM(x)			((x) << 5)
+
+#define MHL_DCAP_VID_LINK_RGB444		0x01
+#define MHL_DCAP_VID_LINK_YCBCR444		0x02
+#define MHL_DCAP_VID_LINK_YCBCR422		0x04
+#define MHL_DCAP_VID_LINK_PPIXEL		0x08
+#define MHL_DCAP_VID_LINK_ISLANDS		0x10
+#define MHL_DCAP_VID_LINK_VGA			0x20
+#define MHL_DCAP_VID_LINK_16BPP			0x40
+
+#define MHL_DCAP_AUD_LINK_2CH			0x01
+#define MHL_DCAP_AUD_LINK_8CH			0x02
+
+#define MHL_DCAP_VT_GRAPHICS			0x00
+#define MHL_DCAP_VT_PHOTO			0x02
+#define MHL_DCAP_VT_CINEMA			0x04
+#define MHL_DCAP_VT_GAMES			0x08
+#define MHL_DCAP_SUPP_VT			0x80
+
+#define MHL_DCAP_LD_DISPLAY			0x01
+#define MHL_DCAP_LD_VIDEO			0x02
+#define MHL_DCAP_LD_AUDIO			0x04
+#define MHL_DCAP_LD_MEDIA			0x08
+#define MHL_DCAP_LD_TUNER			0x10
+#define MHL_DCAP_LD_RECORD			0x20
+#define MHL_DCAP_LD_SPEAKER			0x40
+#define MHL_DCAP_LD_GUI				0x80
+#define MHL_DCAP_LD_ALL				0xFF
+
+#define MHL_DCAP_FEATURE_RCP_SUPPORT		0x01
+#define MHL_DCAP_FEATURE_RAP_SUPPORT		0x02
+#define MHL_DCAP_FEATURE_SP_SUPPORT		0x04
+#define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR	0x08
+#define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT	0x10
+#define MHL_DCAP_FEATURE_RBP_SUPPORT		0x40
+
+/* Extended Device Capabilities Registers */
+enum {
+	MHL_XDC_ECBUS_SPEEDS,
+	MHL_XDC_TMDS_SPEEDS,
+	MHL_XDC_ECBUS_ROLES,
+	MHL_XDC_LOG_DEV_MAPX,
+	MHL_XDC_SIZE
+};
+
+#define MHL_XDC_ECBUS_S_075			0x01
+#define MHL_XDC_ECBUS_S_8BIT			0x02
+#define MHL_XDC_ECBUS_S_12BIT			0x04
+#define MHL_XDC_ECBUS_D_150			0x10
+#define MHL_XDC_ECBUS_D_8BIT			0x20
+
+#define MHL_XDC_TMDS_000			0x00
+#define MHL_XDC_TMDS_150			0x01
+#define MHL_XDC_TMDS_300			0x02
+#define MHL_XDC_TMDS_600			0x04
+
+/* MHL_XDC_ECBUS_ROLES flags */
+#define MHL_XDC_DEV_HOST			0x01
+#define MHL_XDC_DEV_DEVICE			0x02
+#define MHL_XDC_DEV_CHARGER			0x04
+#define MHL_XDC_HID_HOST			0x08
+#define MHL_XDC_HID_DEVICE			0x10
+
+/* MHL_XDC_LOG_DEV_MAPX flags */
+#define MHL_XDC_LD_PHONE			0x01
+
+/* Device Status Registers */
+enum {
+	MHL_DST_CONNECTED_RDY,
+	MHL_DST_LINK_MODE,
+	MHL_DST_VERSION,
+	MHL_DST_SIZE
+};
+
+/* Offset of DEVSTAT registers */
+#define MHL_DST_OFFSET				0x30
+#define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name)
+
+#define MHL_DST_CONN_DCAP_RDY			0x01
+#define MHL_DST_CONN_XDEVCAPP_SUPP		0x02
+#define MHL_DST_CONN_POW_STAT			0x04
+#define MHL_DST_CONN_PLIM_STAT_MASK		0x38
+
+#define MHL_DST_LM_CLK_MODE_MASK		0x07
+#define MHL_DST_LM_CLK_MODE_PACKED_PIXEL	0x02
+#define MHL_DST_LM_CLK_MODE_NORMAL		0x03
+#define MHL_DST_LM_PATH_EN_MASK			0x08
+#define MHL_DST_LM_PATH_ENABLED			0x08
+#define MHL_DST_LM_PATH_DISABLED		0x00
+#define MHL_DST_LM_MUTED_MASK			0x10
+
+/* Extended Device Status Registers */
+enum {
+	MHL_XDS_CURR_ECBUS_MODE,
+	MHL_XDS_AVLINK_MODE_STATUS,
+	MHL_XDS_AVLINK_MODE_CONTROL,
+	MHL_XDS_MULTI_SINK_STATUS,
+	MHL_XDS_SIZE
+};
+
+/* Offset of XDEVSTAT registers */
+#define MHL_XDS_OFFSET				0x90
+#define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name)
+
+/* MHL_XDS_REG_CURR_ECBUS_MODE flags */
+#define MHL_XDS_SLOT_MODE_8BIT			0x00
+#define MHL_XDS_SLOT_MODE_6BIT			0x01
+#define MHL_XDS_ECBUS_S				0x04
+#define MHL_XDS_ECBUS_D				0x08
+
+#define MHL_XDS_LINK_CLOCK_75MHZ		0x00
+#define MHL_XDS_LINK_CLOCK_150MHZ		0x10
+#define MHL_XDS_LINK_CLOCK_300MHZ		0x20
+#define MHL_XDS_LINK_CLOCK_600MHZ		0x30
+
+#define MHL_XDS_LINK_STATUS_NO_SIGNAL		0x00
+#define MHL_XDS_LINK_STATUS_CRU_LOCKED		0x01
+#define MHL_XDS_LINK_STATUS_TMDS_NORMAL		0x02
+#define MHL_XDS_LINK_STATUS_TMDS_RESERVED	0x03
+
+#define MHL_XDS_LINK_RATE_1_5_GBPS		0x00
+#define MHL_XDS_LINK_RATE_3_0_GBPS		0x01
+#define MHL_XDS_LINK_RATE_6_0_GBPS		0x02
+#define MHL_XDS_ATT_CAPABLE			0x08
+
+#define MHL_XDS_SINK_STATUS_1_HPD_LOW		0x00
+#define MHL_XDS_SINK_STATUS_1_HPD_HIGH		0x01
+#define MHL_XDS_SINK_STATUS_2_HPD_LOW		0x00
+#define MHL_XDS_SINK_STATUS_2_HPD_HIGH		0x04
+#define MHL_XDS_SINK_STATUS_3_HPD_LOW		0x00
+#define MHL_XDS_SINK_STATUS_3_HPD_HIGH		0x10
+#define MHL_XDS_SINK_STATUS_4_HPD_LOW		0x00
+#define MHL_XDS_SINK_STATUS_4_HPD_HIGH		0x40
+
+/* Interrupt Registers */
+enum {
+	MHL_INT_RCHANGE,
+	MHL_INT_DCHANGE,
+	MHL_INT_SIZE
+};
+
+/* Offset of DEVSTAT registers */
+#define MHL_INT_OFFSET				0x20
+#define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name)
+
+#define	MHL_INT_RC_DCAP_CHG			0x01
+#define MHL_INT_RC_DSCR_CHG			0x02
+#define MHL_INT_RC_REQ_WRT			0x04
+#define MHL_INT_RC_GRT_WRT			0x08
+#define MHL_INT_RC_3D_REQ			0x10
+#define MHL_INT_RC_FEAT_REQ			0x20
+#define MHL_INT_RC_FEAT_COMPLETE		0x40
+
+#define MHL_INT_DC_EDID_CHG			0x02
+
+enum {
+	MHL_ACK = 0x33, /* Command or Data byte acknowledge */
+	MHL_NACK = 0x34, /* Command or Data byte not acknowledge */
+	MHL_ABORT = 0x35, /* Transaction abort */
+	MHL_WRITE_STAT = 0xe0, /* Write one status register */
+	MHL_SET_INT = 0x60, /* Write one interrupt register */
+	MHL_READ_DEVCAP_REG = 0x61, /* Read one register */
+	MHL_GET_STATE = 0x62, /* Read CBUS revision level from follower */
+	MHL_GET_VENDOR_ID = 0x63, /* Read vendor ID value from follower */
+	MHL_SET_HPD = 0x64, /* Set Hot Plug Detect in follower */
+	MHL_CLR_HPD = 0x65, /* Clear Hot Plug Detect in follower */
+	MHL_SET_CAP_ID = 0x66, /* Set Capture ID for downstream device */
+	MHL_GET_CAP_ID = 0x67, /* Get Capture ID from downstream device */
+	MHL_MSC_MSG = 0x68, /* VS command to send RCP sub-commands */
+	MHL_GET_SC1_ERRORCODE = 0x69, /* Get Vendor-Specific error code */
+	MHL_GET_DDC_ERRORCODE = 0x6A, /* Get DDC channel command error code */
+	MHL_GET_MSC_ERRORCODE = 0x6B, /* Get MSC command error code */
+	MHL_WRITE_BURST = 0x6C, /* Write 1-16 bytes to responder's scratchpad */
+	MHL_GET_SC3_ERRORCODE = 0x6D, /* Get channel 3 command error code */
+	MHL_WRITE_XSTAT = 0x70, /* Write one extended status register */
+	MHL_READ_XDEVCAP_REG = 0x71, /* Read one extended devcap register */
+	/* let the rest of these float, they are software specific */
+	MHL_READ_EDID_BLOCK,
+	MHL_SEND_3D_REQ_OR_FEAT_REQ,
+	MHL_READ_DEVCAP,
+	MHL_READ_XDEVCAP
+};
+
+/* MSC message types */
+enum {
+	MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */
+	MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */
+	MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */
+	MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */
+	MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */
+	MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */
+	MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */
+	MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */
+	MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */
+	MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */
+	MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */
+	MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */
+	MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */
+	MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */
+	MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */
+	MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */
+	MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */
+	MHL_MSC_MSG_BIST_TRIGGER = 0x60,
+	MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61,
+	MHL_MSC_MSG_BIST_READY = 0x62,
+	MHL_MSC_MSG_BIST_STOP = 0x63,
+};
+
+/* RAP action codes */
+#define MHL_RAP_POLL		0x00	/* Just do an ack */
+#define MHL_RAP_CONTENT_ON	0x10	/* Turn content stream ON */
+#define MHL_RAP_CONTENT_OFF	0x11	/* Turn content stream OFF */
+#define MHL_RAP_CBUS_MODE_DOWN	0x20
+#define MHL_RAP_CBUS_MODE_UP	0x21
+
+/* RAPK status codes */
+#define MHL_RAPK_NO_ERR		0x00	/* RAP action recognized & supported */
+#define MHL_RAPK_UNRECOGNIZED	0x01	/* Unknown RAP action code received */
+#define MHL_RAPK_UNSUPPORTED	0x02	/* Rcvd RAP action code not supported */
+#define MHL_RAPK_BUSY		0x03	/* Responder too busy to respond */
+
+/* Bit masks for RCP messages */
+#define MHL_RCP_KEY_RELEASED_MASK	0x80
+#define MHL_RCP_KEY_ID_MASK		0x7F
+
+/*
+ * Error status codes for RCPE messages
+ */
+/* No error. (Not allowed in RCPE messages) */
+#define MHL_RCPE_STATUS_NO_ERROR		0x00
+/* Unsupported/unrecognized key code */
+#define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE	0x01
+/* Responder busy. Initiator may retry message */
+#define MHL_RCPE_STATUS_BUSY			0x02
+
+/*
+ * Error status codes for RBPE messages
+ */
+/* No error. (Not allowed in RBPE messages) */
+#define MHL_RBPE_STATUS_NO_ERROR		0x00
+/* Unsupported/unrecognized button code */
+#define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE	0x01
+/* Responder busy. Initiator may retry message */
+#define MHL_RBPE_STATUS_BUSY			0x02
+
+/*
+ * Error status codes for UCPE messages
+ */
+/* No error. (Not allowed in UCPE messages) */
+#define MHL_UCPE_STATUS_NO_ERROR		0x00
+/* Unsupported/unrecognized key code */
+#define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE	0x01
+
+enum mhl_burst_id {
+	MHL_BURST_ID_3D_VIC = 0x10,
+	MHL_BURST_ID_3D_DTD = 0x11,
+	MHL_BURST_ID_HEV_VIC = 0x20,
+	MHL_BURST_ID_HEV_DTDA = 0x21,
+	MHL_BURST_ID_HEV_DTDB = 0x22,
+	MHL_BURST_ID_VC_ASSIGN = 0x38,
+	MHL_BURST_ID_VC_CONFIRM = 0x39,
+	MHL_BURST_ID_AUD_DELAY = 0x40,
+	MHL_BURST_ID_ADT_BURSTID = 0x41,
+	MHL_BURST_ID_BIST_SETUP = 0x51,
+	MHL_BURST_ID_BIST_RETURN_STAT = 0x52,
+	MHL_BURST_ID_EMSC_SUPPORT = 0x61,
+	MHL_BURST_ID_HID_PAYLOAD = 0x62,
+	MHL_BURST_ID_BLK_RCV_BUFFER_INFO = 0x63,
+	MHL_BURST_ID_BITS_PER_PIXEL_FMT = 0x64,
+};
+
+struct mhl_burst_blk_rcv_buffer_info {
+	__be16 id;
+	__le16 size;
+} __packed;
+
+struct mhl3_burst_header {
+	__be16 id;
+	u8 checksum;
+	u8 total_entries;
+	u8 sequence_index;
+} __packed;
+
+struct mhl_burst_bits_per_pixel_fmt {
+	struct mhl3_burst_header hdr;
+	u8 num_entries;
+	struct {
+		u8 stream_id;
+		u8 pixel_format;
+	} __packed desc[];
+} __packed;
+
+struct mhl_burst_emsc_support {
+	struct mhl3_burst_header hdr;
+	u8 num_entries;
+	__be16 burst_id[];
+} __packed;
+
+struct mhl_burst_audio_descr {
+	struct mhl3_burst_header hdr;
+	u8 flags;
+	u8 short_desc[9];
+} __packed;
+
+/*
+ * MHL3 infoframe related definitions
+ */
+
+#define MHL3_IEEE_OUI		0x7ca61d
+#define MHL3_INFOFRAME_SIZE	15
+
+enum mhl3_video_format {
+	MHL3_VIDEO_FORMAT_NONE,
+	MHL3_VIDEO_FORMAT_3D,
+	MHL3_VIDEO_FORMAT_MULTI_VIEW,
+	MHL3_VIDEO_FORMAT_DUAL_3D
+};
+
+enum mhl3_3d_format_type {
+	MHL3_3D_FORMAT_TYPE_FS, /* frame sequential */
+	MHL3_3D_FORMAT_TYPE_TB, /* top-bottom */
+	MHL3_3D_FORMAT_TYPE_LR, /* left-right */
+	MHL3_3D_FORMAT_TYPE_FS_TB, /* frame sequential, top-bottom */
+	MHL3_3D_FORMAT_TYPE_FS_LR, /* frame sequential, left-right */
+	MHL3_3D_FORMAT_TYPE_TB_LR /* top-bottom, left-right */
+};
+
+struct mhl3_infoframe {
+	unsigned char version;
+	enum mhl3_video_format video_format;
+	enum mhl3_3d_format_type format_type;
+	bool sep_audio;
+	int hev_format;
+	int av_delay;
+};
+
+#endif /* __MHL_H__ */