Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1143 insertions, 0 deletions

diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
new file mode 100644
index 000000000..10b1990bc
--- /dev/null
+++ b/include/drm/drm_atomic.h
@@ -0,0 +1,1143 @@
+/*
+ * Copyright (C) 2014 Red Hat
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Rob Clark <robdclark@gmail.com>
+ * Daniel Vetter <daniel.vetter@ffwll.ch>
+ */
+
+#ifndef DRM_ATOMIC_H_
+#define DRM_ATOMIC_H_
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_util.h>
+
+/**
+ * struct drm_crtc_commit - track modeset commits on a CRTC
+ *
+ * This structure is used to track pending modeset changes and atomic commit on
+ * a per-CRTC basis. Since updating the list should never block, this structure
+ * is reference counted to allow waiters to safely wait on an event to complete,
+ * without holding any locks.
+ *
+ * It has 3 different events in total to allow a fine-grained synchronization
+ * between outstanding updates::
+ *
+ *	atomic commit thread			hardware
+ *
+ * 	write new state into hardware	---->	...
+ * 	signal hw_done
+ * 						switch to new state on next
+ * 	...					v/hblank
+ *
+ *	wait for buffers to show up		...
+ *
+ *	...					send completion irq
+ *						irq handler signals flip_done
+ *	cleanup old buffers
+ *
+ * 	signal cleanup_done
+ *
+ * 	wait for flip_done		<----
+ * 	clean up atomic state
+ *
+ * The important bit to know is that &cleanup_done is the terminal event, but the
+ * ordering between &flip_done and &hw_done is entirely up to the specific driver
+ * and modeset state change.
+ *
+ * For an implementation of how to use this look at
+ * drm_atomic_helper_setup_commit() from the atomic helper library.
+ *
+ * See also drm_crtc_commit_wait().
+ */
+struct drm_crtc_commit {
+	/**
+	 * @crtc:
+	 *
+	 * DRM CRTC for this commit.
+	 */
+	struct drm_crtc *crtc;
+
+	/**
+	 * @ref:
+	 *
+	 * Reference count for this structure. Needed to allow blocking on
+	 * completions without the risk of the completion disappearing
+	 * meanwhile.
+	 */
+	struct kref ref;
+
+	/**
+	 * @flip_done:
+	 *
+	 * Will be signaled when the hardware has flipped to the new set of
+	 * buffers. Signals at the same time as when the drm event for this
+	 * commit is sent to userspace, or when an out-fence is singalled. Note
+	 * that for most hardware, in most cases this happens after @hw_done is
+	 * signalled.
+	 *
+	 * Completion of this stage is signalled implicitly by calling
+	 * drm_crtc_send_vblank_event() on &drm_crtc_state.event.
+	 */
+	struct completion flip_done;
+
+	/**
+	 * @hw_done:
+	 *
+	 * Will be signalled when all hw register changes for this commit have
+	 * been written out. Especially when disabling a pipe this can be much
+	 * later than @flip_done, since that can signal already when the
+	 * screen goes black, whereas to fully shut down a pipe more register
+	 * I/O is required.
+	 *
+	 * Note that this does not need to include separately reference-counted
+	 * resources like backing storage buffer pinning, or runtime pm
+	 * management.
+	 *
+	 * Drivers should call drm_atomic_helper_commit_hw_done() to signal
+	 * completion of this stage.
+	 */
+	struct completion hw_done;
+
+	/**
+	 * @cleanup_done:
+	 *
+	 * Will be signalled after old buffers have been cleaned up by calling
+	 * drm_atomic_helper_cleanup_planes(). Since this can only happen after
+	 * a vblank wait completed it might be a bit later. This completion is
+	 * useful to throttle updates and avoid hardware updates getting ahead
+	 * of the buffer cleanup too much.
+	 *
+	 * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal
+	 * completion of this stage.
+	 */
+	struct completion cleanup_done;
+
+	/**
+	 * @commit_entry:
+	 *
+	 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
+	 * $drm_crtc.commit_lock.
+	 */
+	struct list_head commit_entry;
+
+	/**
+	 * @event:
+	 *
+	 * &drm_pending_vblank_event pointer to clean up private events.
+	 */
+	struct drm_pending_vblank_event *event;
+
+	/**
+	 * @abort_completion:
+	 *
+	 * A flag that's set after drm_atomic_helper_setup_commit() takes a
+	 * second reference for the completion of $drm_crtc_state.event. It's
+	 * used by the free code to remove the second reference if commit fails.
+	 */
+	bool abort_completion;
+};
+
+struct __drm_planes_state {
+	struct drm_plane *ptr;
+	struct drm_plane_state *state, *old_state, *new_state;
+};
+
+struct __drm_crtcs_state {
+	struct drm_crtc *ptr;
+	struct drm_crtc_state *state, *old_state, *new_state;
+
+	/**
+	 * @commit:
+	 *
+	 * A reference to the CRTC commit object that is kept for use by
+	 * drm_atomic_helper_wait_for_flip_done() after
+	 * drm_atomic_helper_commit_hw_done() is called. This ensures that a
+	 * concurrent commit won't free a commit object that is still in use.
+	 */
+	struct drm_crtc_commit *commit;
+
+	s32 __user *out_fence_ptr;
+	u64 last_vblank_count;
+};
+
+struct __drm_connnectors_state {
+	struct drm_connector *ptr;
+	struct drm_connector_state *state, *old_state, *new_state;
+	/**
+	 * @out_fence_ptr:
+	 *
+	 * User-provided pointer which the kernel uses to return a sync_file
+	 * file descriptor. Used by writeback connectors to signal completion of
+	 * the writeback.
+	 */
+	s32 __user *out_fence_ptr;
+};
+
+struct drm_private_obj;
+struct drm_private_state;
+
+/**
+ * struct drm_private_state_funcs - atomic state functions for private objects
+ *
+ * These hooks are used by atomic helpers to create, swap and destroy states of
+ * private objects. The structure itself is used as a vtable to identify the
+ * associated private object type. Each private object type that needs to be
+ * added to the atomic states is expected to have an implementation of these
+ * hooks and pass a pointer to its drm_private_state_funcs struct to
+ * drm_atomic_get_private_obj_state().
+ */
+struct drm_private_state_funcs {
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current state of the private object and return it. It
+	 * is an error to call this before obj->state has been initialized.
+	 *
+	 * RETURNS:
+	 *
+	 * Duplicated atomic state or NULL when obj->state is not
+	 * initialized or allocation failed.
+	 */
+	struct drm_private_state *(*atomic_duplicate_state)(struct drm_private_obj *obj);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Frees the private object state created with @atomic_duplicate_state.
+	 */
+	void (*atomic_destroy_state)(struct drm_private_obj *obj,
+				     struct drm_private_state *state);
+
+	/**
+	 * @atomic_print_state:
+	 *
+	 * If driver subclasses &struct drm_private_state, it should implement
+	 * this optional hook for printing additional driver specific state.
+	 *
+	 * Do not call this directly, use drm_atomic_private_obj_print_state()
+	 * instead.
+	 */
+	void (*atomic_print_state)(struct drm_printer *p,
+				   const struct drm_private_state *state);
+};
+
+/**
+ * struct drm_private_obj - base struct for driver private atomic object
+ *
+ * A driver private object is initialized by calling
+ * drm_atomic_private_obj_init() and cleaned up by calling
+ * drm_atomic_private_obj_fini().
+ *
+ * Currently only tracks the state update functions and the opaque driver
+ * private state itself, but in the future might also track which
+ * &drm_modeset_lock is required to duplicate and update this object's state.
+ *
+ * All private objects must be initialized before the DRM device they are
+ * attached to is registered to the DRM subsystem (call to drm_dev_register())
+ * and should stay around until this DRM device is unregistered (call to
+ * drm_dev_unregister()). In other words, private objects lifetime is tied
+ * to the DRM device lifetime. This implies that:
+ *
+ * 1/ all calls to drm_atomic_private_obj_init() must be done before calling
+ *    drm_dev_register()
+ * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling
+ *    drm_dev_unregister()
+ *
+ * If that private object is used to store a state shared by multiple
+ * CRTCs, proper care must be taken to ensure that non-blocking commits are
+ * properly ordered to avoid a use-after-free issue.
+ *
+ * Indeed, assuming a sequence of two non-blocking &drm_atomic_commit on two
+ * different &drm_crtc using different &drm_plane and &drm_connector, so with no
+ * resources shared, there's no guarantee on which commit is going to happen
+ * first. However, the second &drm_atomic_commit will consider the first
+ * &drm_private_obj its old state, and will be in charge of freeing it whenever
+ * the second &drm_atomic_commit is done.
+ *
+ * If the first &drm_atomic_commit happens after it, it will consider its
+ * &drm_private_obj the new state and will be likely to access it, resulting in
+ * an access to a freed memory region. Drivers should store (and get a reference
+ * to) the &drm_crtc_commit structure in our private state in
+ * &drm_mode_config_helper_funcs.atomic_commit_setup, and then wait for that
+ * commit to complete as the first step of
+ * &drm_mode_config_helper_funcs.atomic_commit_tail, similar to
+ * drm_atomic_helper_wait_for_dependencies().
+ */
+struct drm_private_obj {
+	/**
+	 * @head: List entry used to attach a private object to a &drm_device
+	 * (queued to &drm_mode_config.privobj_list).
+	 */
+	struct list_head head;
+
+	/**
+	 * @lock: Modeset lock to protect the state object.
+	 */
+	struct drm_modeset_lock lock;
+
+	/**
+	 * @state: Current atomic state for this driver private object.
+	 */
+	struct drm_private_state *state;
+
+	/**
+	 * @funcs:
+	 *
+	 * Functions to manipulate the state of this driver private object, see
+	 * &drm_private_state_funcs.
+	 */
+	const struct drm_private_state_funcs *funcs;
+};
+
+/**
+ * drm_for_each_privobj() - private object iterator
+ *
+ * @privobj: pointer to the current private object. Updated after each
+ *	     iteration
+ * @dev: the DRM device we want get private objects from
+ *
+ * Allows one to iterate over all private objects attached to @dev
+ */
+#define drm_for_each_privobj(privobj, dev) \
+	list_for_each_entry(privobj, &(dev)->mode_config.privobj_list, head)
+
+/**
+ * struct drm_private_state - base struct for driver private object state
+ *
+ * Currently only contains a backpointer to the overall atomic update,
+ * and the relevant private object but in the future also might hold
+ * synchronization information similar to e.g. &drm_crtc.commit.
+ */
+struct drm_private_state {
+	/**
+	 * @state: backpointer to global drm_atomic_state
+	 */
+	struct drm_atomic_state *state;
+
+	/**
+	 * @obj: backpointer to the private object
+	 */
+	struct drm_private_obj *obj;
+};
+
+struct __drm_private_objs_state {
+	struct drm_private_obj *ptr;
+	struct drm_private_state *state, *old_state, *new_state;
+};
+
+/**
+ * struct drm_atomic_state - the global state object for atomic updates
+ * @ref: count of all references to this state (will not be freed until zero)
+ * @dev: parent DRM device
+ * @async_update: hint for asynchronous plane update
+ * @planes: pointer to array of structures with per-plane data
+ * @crtcs: pointer to array of CRTC pointers
+ * @num_connector: size of the @connectors and @connector_states arrays
+ * @connectors: pointer to array of structures with per-connector data
+ * @num_private_objs: size of the @private_objs array
+ * @private_objs: pointer to array of private object pointers
+ * @acquire_ctx: acquire context for this atomic modeset state update
+ *
+ * States are added to an atomic update by calling drm_atomic_get_crtc_state(),
+ * drm_atomic_get_plane_state(), drm_atomic_get_connector_state(), or for
+ * private state structures, drm_atomic_get_private_obj_state().
+ */
+struct drm_atomic_state {
+	struct kref ref;
+
+	struct drm_device *dev;
+
+	/**
+	 * @allow_modeset:
+	 *
+	 * Allow full modeset. This is used by the ATOMIC IOCTL handler to
+	 * implement the DRM_MODE_ATOMIC_ALLOW_MODESET flag. Drivers should
+	 * never consult this flag, instead looking at the output of
+	 * drm_atomic_crtc_needs_modeset().
+	 */
+	bool allow_modeset : 1;
+	/**
+	 * @legacy_cursor_update:
+	 *
+	 * Hint to enforce legacy cursor IOCTL semantics.
+	 *
+	 * WARNING: This is thoroughly broken and pretty much impossible to
+	 * implement correctly. Drivers must ignore this and should instead
+	 * implement &drm_plane_helper_funcs.atomic_async_check and
+	 * &drm_plane_helper_funcs.atomic_async_commit hooks. New users of this
+	 * flag are not allowed.
+	 */
+	bool legacy_cursor_update : 1;
+	bool async_update : 1;
+	/**
+	 * @duplicated:
+	 *
+	 * Indicates whether or not this atomic state was duplicated using
+	 * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
+	 * should use this to fixup normal  inconsistencies in duplicated
+	 * states.
+	 */
+	bool duplicated : 1;
+	struct __drm_planes_state *planes;
+	struct __drm_crtcs_state *crtcs;
+	int num_connector;
+	struct __drm_connnectors_state *connectors;
+	int num_private_objs;
+	struct __drm_private_objs_state *private_objs;
+
+	struct drm_modeset_acquire_ctx *acquire_ctx;
+
+	/**
+	 * @fake_commit:
+	 *
+	 * Used for signaling unbound planes/connectors.
+	 * When a connector or plane is not bound to any CRTC, it's still important
+	 * to preserve linearity to prevent the atomic states from being freed to early.
+	 *
+	 * This commit (if set) is not bound to any CRTC, but will be completed when
+	 * drm_atomic_helper_commit_hw_done() is called.
+	 */
+	struct drm_crtc_commit *fake_commit;
+
+	/**
+	 * @commit_work:
+	 *
+	 * Work item which can be used by the driver or helpers to execute the
+	 * commit without blocking.
+	 */
+	struct work_struct commit_work;
+};
+
+void __drm_crtc_commit_free(struct kref *kref);
+
+/**
+ * drm_crtc_commit_get - acquire a reference to the CRTC commit
+ * @commit: CRTC commit
+ *
+ * Increases the reference of @commit.
+ *
+ * Returns:
+ * The pointer to @commit, with reference increased.
+ */
+static inline struct drm_crtc_commit *drm_crtc_commit_get(struct drm_crtc_commit *commit)
+{
+	kref_get(&commit->ref);
+	return commit;
+}
+
+/**
+ * drm_crtc_commit_put - release a reference to the CRTC commmit
+ * @commit: CRTC commit
+ *
+ * This releases a reference to @commit which is freed after removing the
+ * final reference. No locking required and callable from any context.
+ */
+static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit)
+{
+	kref_put(&commit->ref, __drm_crtc_commit_free);
+}
+
+int drm_crtc_commit_wait(struct drm_crtc_commit *commit);
+
+struct drm_atomic_state * __must_check
+drm_atomic_state_alloc(struct drm_device *dev);
+void drm_atomic_state_clear(struct drm_atomic_state *state);
+
+/**
+ * drm_atomic_state_get - acquire a reference to the atomic state
+ * @state: The atomic state
+ *
+ * Returns a new reference to the @state
+ */
+static inline struct drm_atomic_state *
+drm_atomic_state_get(struct drm_atomic_state *state)
+{
+	kref_get(&state->ref);
+	return state;
+}
+
+void __drm_atomic_state_free(struct kref *ref);
+
+/**
+ * drm_atomic_state_put - release a reference to the atomic state
+ * @state: The atomic state
+ *
+ * This releases a reference to @state which is freed after removing the
+ * final reference. No locking required and callable from any context.
+ */
+static inline void drm_atomic_state_put(struct drm_atomic_state *state)
+{
+	kref_put(&state->ref, __drm_atomic_state_free);
+}
+
+int  __must_check
+drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state);
+void drm_atomic_state_default_clear(struct drm_atomic_state *state);
+void drm_atomic_state_default_release(struct drm_atomic_state *state);
+
+struct drm_crtc_state * __must_check
+drm_atomic_get_crtc_state(struct drm_atomic_state *state,
+			  struct drm_crtc *crtc);
+struct drm_plane_state * __must_check
+drm_atomic_get_plane_state(struct drm_atomic_state *state,
+			   struct drm_plane *plane);
+struct drm_connector_state * __must_check
+drm_atomic_get_connector_state(struct drm_atomic_state *state,
+			       struct drm_connector *connector);
+
+void drm_atomic_private_obj_init(struct drm_device *dev,
+				 struct drm_private_obj *obj,
+				 struct drm_private_state *state,
+				 const struct drm_private_state_funcs *funcs);
+void drm_atomic_private_obj_fini(struct drm_private_obj *obj);
+
+struct drm_private_state * __must_check
+drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
+				 struct drm_private_obj *obj);
+struct drm_private_state *
+drm_atomic_get_old_private_obj_state(struct drm_atomic_state *state,
+				     struct drm_private_obj *obj);
+struct drm_private_state *
+drm_atomic_get_new_private_obj_state(struct drm_atomic_state *state,
+				     struct drm_private_obj *obj);
+
+struct drm_connector *
+drm_atomic_get_old_connector_for_encoder(struct drm_atomic_state *state,
+					 struct drm_encoder *encoder);
+struct drm_connector *
+drm_atomic_get_new_connector_for_encoder(struct drm_atomic_state *state,
+					 struct drm_encoder *encoder);
+
+/**
+ * drm_atomic_get_existing_crtc_state - get CRTC state, if it exists
+ * @state: global atomic state object
+ * @crtc: CRTC to grab
+ *
+ * This function returns the CRTC state for the given CRTC, or NULL
+ * if the CRTC is not part of the global atomic state.
+ *
+ * This function is deprecated, @drm_atomic_get_old_crtc_state or
+ * @drm_atomic_get_new_crtc_state should be used instead.
+ */
+static inline struct drm_crtc_state *
+drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
+				   struct drm_crtc *crtc)
+{
+	return state->crtcs[drm_crtc_index(crtc)].state;
+}
+
+/**
+ * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists
+ * @state: global atomic state object
+ * @crtc: CRTC to grab
+ *
+ * This function returns the old CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
+ */
+static inline struct drm_crtc_state *
+drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
+			      struct drm_crtc *crtc)
+{
+	return state->crtcs[drm_crtc_index(crtc)].old_state;
+}
+/**
+ * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists
+ * @state: global atomic state object
+ * @crtc: CRTC to grab
+ *
+ * This function returns the new CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
+ */
+static inline struct drm_crtc_state *
+drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
+			      struct drm_crtc *crtc)
+{
+	return state->crtcs[drm_crtc_index(crtc)].new_state;
+}
+
+/**
+ * drm_atomic_get_existing_plane_state - get plane state, if it exists
+ * @state: global atomic state object
+ * @plane: plane to grab
+ *
+ * This function returns the plane state for the given plane, or NULL
+ * if the plane is not part of the global atomic state.
+ *
+ * This function is deprecated, @drm_atomic_get_old_plane_state or
+ * @drm_atomic_get_new_plane_state should be used instead.
+ */
+static inline struct drm_plane_state *
+drm_atomic_get_existing_plane_state(struct drm_atomic_state *state,
+				    struct drm_plane *plane)
+{
+	return state->planes[drm_plane_index(plane)].state;
+}
+
+/**
+ * drm_atomic_get_old_plane_state - get plane state, if it exists
+ * @state: global atomic state object
+ * @plane: plane to grab
+ *
+ * This function returns the old plane state for the given plane, or
+ * NULL if the plane is not part of the global atomic state.
+ */
+static inline struct drm_plane_state *
+drm_atomic_get_old_plane_state(struct drm_atomic_state *state,
+			       struct drm_plane *plane)
+{
+	return state->planes[drm_plane_index(plane)].old_state;
+}
+
+/**
+ * drm_atomic_get_new_plane_state - get plane state, if it exists
+ * @state: global atomic state object
+ * @plane: plane to grab
+ *
+ * This function returns the new plane state for the given plane, or
+ * NULL if the plane is not part of the global atomic state.
+ */
+static inline struct drm_plane_state *
+drm_atomic_get_new_plane_state(struct drm_atomic_state *state,
+			       struct drm_plane *plane)
+{
+	return state->planes[drm_plane_index(plane)].new_state;
+}
+
+/**
+ * drm_atomic_get_existing_connector_state - get connector state, if it exists
+ * @state: global atomic state object
+ * @connector: connector to grab
+ *
+ * This function returns the connector state for the given connector,
+ * or NULL if the connector is not part of the global atomic state.
+ *
+ * This function is deprecated, @drm_atomic_get_old_connector_state or
+ * @drm_atomic_get_new_connector_state should be used instead.
+ */
+static inline struct drm_connector_state *
+drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
+					struct drm_connector *connector)
+{
+	int index = drm_connector_index(connector);
+
+	if (index >= state->num_connector)
+		return NULL;
+
+	return state->connectors[index].state;
+}
+
+/**
+ * drm_atomic_get_old_connector_state - get connector state, if it exists
+ * @state: global atomic state object
+ * @connector: connector to grab
+ *
+ * This function returns the old connector state for the given connector,
+ * or NULL if the connector is not part of the global atomic state.
+ */
+static inline struct drm_connector_state *
+drm_atomic_get_old_connector_state(struct drm_atomic_state *state,
+				   struct drm_connector *connector)
+{
+	int index = drm_connector_index(connector);
+
+	if (index >= state->num_connector)
+		return NULL;
+
+	return state->connectors[index].old_state;
+}
+
+/**
+ * drm_atomic_get_new_connector_state - get connector state, if it exists
+ * @state: global atomic state object
+ * @connector: connector to grab
+ *
+ * This function returns the new connector state for the given connector,
+ * or NULL if the connector is not part of the global atomic state.
+ */
+static inline struct drm_connector_state *
+drm_atomic_get_new_connector_state(struct drm_atomic_state *state,
+				   struct drm_connector *connector)
+{
+	int index = drm_connector_index(connector);
+
+	if (index >= state->num_connector)
+		return NULL;
+
+	return state->connectors[index].new_state;
+}
+
+/**
+ * __drm_atomic_get_current_plane_state - get current plane state
+ * @state: global atomic state object
+ * @plane: plane to grab
+ *
+ * This function returns the plane state for the given plane, either from
+ * @state, or if the plane isn't part of the atomic state update, from @plane.
+ * This is useful in atomic check callbacks, when drivers need to peek at, but
+ * not change, state of other planes, since it avoids threading an error code
+ * back up the call chain.
+ *
+ * WARNING:
+ *
+ * Note that this function is in general unsafe since it doesn't check for the
+ * required locking for access state structures. Drivers must ensure that it is
+ * safe to access the returned state structure through other means. One common
+ * example is when planes are fixed to a single CRTC, and the driver knows that
+ * the CRTC lock is held already. In that case holding the CRTC lock gives a
+ * read-lock on all planes connected to that CRTC. But if planes can be
+ * reassigned things get more tricky. In that case it's better to use
+ * drm_atomic_get_plane_state and wire up full error handling.
+ *
+ * Returns:
+ *
+ * Read-only pointer to the current plane state.
+ */
+static inline const struct drm_plane_state *
+__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
+				     struct drm_plane *plane)
+{
+	if (state->planes[drm_plane_index(plane)].state)
+		return state->planes[drm_plane_index(plane)].state;
+
+	return plane->state;
+}
+
+int __must_check
+drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
+			       struct drm_encoder *encoder);
+int __must_check
+drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
+				   struct drm_crtc *crtc);
+int __must_check
+drm_atomic_add_affected_planes(struct drm_atomic_state *state,
+			       struct drm_crtc *crtc);
+
+int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
+int __must_check drm_atomic_commit(struct drm_atomic_state *state);
+int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);
+
+void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
+
+/**
+ * for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @connector: &struct drm_connector iteration cursor
+ * @old_connector_state: &struct drm_connector_state iteration cursor for the
+ * 	old state
+ * @new_connector_state: &struct drm_connector_state iteration cursor for the
+ * 	new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all connectors in an atomic update, tracking both old and
+ * new state. This is useful in places where the state delta needs to be
+ * considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \
+	for ((__i) = 0;								\
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
+			     (old_connector_state) = (__state)->connectors[__i].old_state,	\
+			     (new_connector_state) = (__state)->connectors[__i].new_state, 1))
+
+/**
+ * for_each_old_connector_in_state - iterate over all connectors in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @connector: &struct drm_connector iteration cursor
+ * @old_connector_state: &struct drm_connector_state iteration cursor for the
+ * 	old state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all connectors in an atomic update, tracking only the old
+ * state. This is useful in disable functions, where we need the old state the
+ * hardware is still in.
+ */
+#define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \
+	for ((__i) = 0;								\
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
+			     (old_connector_state) = (__state)->connectors[__i].old_state, 1))
+
+/**
+ * for_each_new_connector_in_state - iterate over all connectors in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @connector: &struct drm_connector iteration cursor
+ * @new_connector_state: &struct drm_connector_state iteration cursor for the
+ * 	new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all connectors in an atomic update, tracking only the new
+ * state. This is useful in enable functions, where we need the new state the
+ * hardware should be in when the atomic commit operation has completed.
+ */
+#define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \
+	for ((__i) = 0;								\
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
+			     (new_connector_state) = (__state)->connectors[__i].new_state, \
+			     (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1))
+
+/**
+ * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @crtc: &struct drm_crtc iteration cursor
+ * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
+ * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all CRTCs in an atomic update, tracking both old and
+ * new state. This is useful in places where the state delta needs to be
+ * considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
+	     (__i)++)							\
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			      (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
+			     (old_crtc_state) = (__state)->crtcs[__i].old_state, \
+			     (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \
+			     (new_crtc_state) = (__state)->crtcs[__i].new_state, \
+			     (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
+
+/**
+ * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @crtc: &struct drm_crtc iteration cursor
+ * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all CRTCs in an atomic update, tracking only the old
+ * state. This is useful in disable functions, where we need the old state the
+ * hardware is still in.
+ */
+#define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i)	\
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
+	     (__i)++)							\
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			     (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
+			     (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))
+
+/**
+ * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @crtc: &struct drm_crtc iteration cursor
+ * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all CRTCs in an atomic update, tracking only the new
+ * state. This is useful in enable functions, where we need the new state the
+ * hardware should be in when the atomic commit operation has completed.
+ */
+#define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i)	\
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
+	     (__i)++)							\
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			     (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
+			     (new_crtc_state) = (__state)->crtcs[__i].new_state, \
+			     (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
+
+/**
+ * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @plane: &struct drm_plane iteration cursor
+ * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
+ * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all planes in an atomic update, tracking both old and
+ * new state. This is useful in places where the state delta needs to be
+ * considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
+	     (__i)++)							\
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
+			      (old_plane_state) = (__state)->planes[__i].old_state,\
+			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
+
+/**
+ * for_each_oldnew_plane_in_state_reverse - iterate over all planes in an atomic
+ * update in reverse order
+ * @__state: &struct drm_atomic_state pointer
+ * @plane: &struct drm_plane iteration cursor
+ * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
+ * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all planes in an atomic update in reverse order,
+ * tracking both old and  new state. This is useful in places where the
+ * state delta needs to be considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_plane_in_state_reverse(__state, plane, old_plane_state, new_plane_state, __i) \
+	for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1);	\
+	     (__i) >= 0;						\
+	     (__i)--)							\
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (old_plane_state) = (__state)->planes[__i].old_state,\
+			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
+
+/**
+ * for_each_new_plane_in_state_reverse - other than only tracking new state,
+ * it's the same as for_each_oldnew_plane_in_state_reverse
+ * @__state: &struct drm_atomic_state pointer
+ * @plane: &struct drm_plane iteration cursor
+ * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ */
+#define for_each_new_plane_in_state_reverse(__state, plane, new_plane_state, __i) \
+	for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1);	\
+	     (__i) >= 0;						\
+	     (__i)--)							\
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
+
+/**
+ * for_each_old_plane_in_state - iterate over all planes in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @plane: &struct drm_plane iteration cursor
+ * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all planes in an atomic update, tracking only the old
+ * state. This is useful in disable functions, where we need the old state the
+ * hardware is still in.
+ */
+#define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
+	     (__i)++)							\
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (old_plane_state) = (__state)->planes[__i].old_state, 1))
+/**
+ * for_each_new_plane_in_state - iterate over all planes in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @plane: &struct drm_plane iteration cursor
+ * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all planes in an atomic update, tracking only the new
+ * state. This is useful in enable functions, where we need the new state the
+ * hardware should be in when the atomic commit operation has completed.
+ */
+#define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \
+	for ((__i) = 0;							\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
+	     (__i)++)							\
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
+			      (new_plane_state) = (__state)->planes[__i].new_state, \
+			      (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1))
+
+/**
+ * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @obj: &struct drm_private_obj iteration cursor
+ * @old_obj_state: &struct drm_private_state iteration cursor for the old state
+ * @new_obj_state: &struct drm_private_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all private objects in an atomic update, tracking both
+ * old and new state. This is useful in places where the state delta needs
+ * to be considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_private_obj_in_state(__state, obj, old_obj_state, new_obj_state, __i) \
+	for ((__i) = 0; \
+	     (__i) < (__state)->num_private_objs && \
+		     ((obj) = (__state)->private_objs[__i].ptr, \
+		      (old_obj_state) = (__state)->private_objs[__i].old_state,	\
+		      (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
+	     (__i)++)
+
+/**
+ * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @obj: &struct drm_private_obj iteration cursor
+ * @old_obj_state: &struct drm_private_state iteration cursor for the old state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all private objects in an atomic update, tracking only
+ * the old state. This is useful in disable functions, where we need the old
+ * state the hardware is still in.
+ */
+#define for_each_old_private_obj_in_state(__state, obj, old_obj_state, __i) \
+	for ((__i) = 0; \
+	     (__i) < (__state)->num_private_objs && \
+		     ((obj) = (__state)->private_objs[__i].ptr, \
+		      (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \
+	     (__i)++)
+
+/**
+ * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @obj: &struct drm_private_obj iteration cursor
+ * @new_obj_state: &struct drm_private_state iteration cursor for the new state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all private objects in an atomic update, tracking only
+ * the new state. This is useful in enable functions, where we need the new state the
+ * hardware should be in when the atomic commit operation has completed.
+ */
+#define for_each_new_private_obj_in_state(__state, obj, new_obj_state, __i) \
+	for ((__i) = 0; \
+	     (__i) < (__state)->num_private_objs && \
+		     ((obj) = (__state)->private_objs[__i].ptr, \
+		      (void)(obj) /* Only to avoid unused-but-set-variable warning */, \
+		      (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
+	     (__i)++)
+
+/**
+ * drm_atomic_crtc_needs_modeset - compute combined modeset need
+ * @state: &drm_crtc_state for the CRTC
+ *
+ * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track
+ * whether the state CRTC changed enough to need a full modeset cycle:
+ * mode_changed, active_changed and connectors_changed. This helper simply
+ * combines these three to compute the overall need for a modeset for @state.
+ *
+ * The atomic helper code sets these booleans, but drivers can and should
+ * change them appropriately to accurately represent whether a modeset is
+ * really needed. In general, drivers should avoid full modesets whenever
+ * possible.
+ *
+ * For example if the CRTC mode has changed, and the hardware is able to enact
+ * the requested mode change without going through a full modeset, the driver
+ * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
+ * implementation.
+ */
+static inline bool
+drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
+{
+	return state->mode_changed || state->active_changed ||
+	       state->connectors_changed;
+}
+
+/**
+ * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active
+ * @state: &drm_crtc_state for the CRTC
+ *
+ * When in self refresh mode, the crtc_state->active value will be false, since
+ * the CRTC is off. However in some cases we're interested in whether the CRTC
+ * is active, or effectively active (ie: it's connected to an active display).
+ * In these cases, use this function instead of just checking active.
+ */
+static inline bool
+drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state)
+{
+	return state->active || state->self_refresh_active;
+}
+
+/**
+ * struct drm_bus_cfg - bus configuration
+ *
+ * This structure stores the configuration of a physical bus between two
+ * components in an output pipeline, usually between two bridges, an encoder
+ * and a bridge, or a bridge and a connector.
+ *
+ * The bus configuration is stored in &drm_bridge_state separately for the
+ * input and output buses, as seen from the point of view of each bridge. The
+ * bus configuration of a bridge output is usually identical to the
+ * configuration of the next bridge's input, but may differ if the signals are
+ * modified between the two bridges, for instance by an inverter on the board.
+ * The input and output configurations of a bridge may differ if the bridge
+ * modifies the signals internally, for instance by performing format
+ * conversion, or modifying signals polarities.
+ */
+struct drm_bus_cfg {
+	/**
+	 * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
+	 *
+	 * This field should not be directly modified by drivers
+	 * (drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
+	 * format negotiation).
+	 */
+	u32 format;
+
+	/**
+	 * @flags: DRM_BUS_* flags used on this bus
+	 */
+	u32 flags;
+};
+
+/**
+ * struct drm_bridge_state - Atomic bridge state object
+ */
+struct drm_bridge_state {
+	/**
+	 * @base: inherit from &drm_private_state
+	 */
+	struct drm_private_state base;
+
+	/**
+	 * @bridge: the bridge this state refers to
+	 */
+	struct drm_bridge *bridge;
+
+	/**
+	 * @input_bus_cfg: input bus configuration
+	 */
+	struct drm_bus_cfg input_bus_cfg;
+
+	/**
+	 * @output_bus_cfg: input bus configuration
+	 */
+	struct drm_bus_cfg output_bus_cfg;
+};
+
+static inline struct drm_bridge_state *
+drm_priv_to_bridge_state(struct drm_private_state *priv)
+{
+	return container_of(priv, struct drm_bridge_state, base);
+}
+
+struct drm_bridge_state *
+drm_atomic_get_bridge_state(struct drm_atomic_state *state,
+			    struct drm_bridge *bridge);
+struct drm_bridge_state *
+drm_atomic_get_old_bridge_state(struct drm_atomic_state *state,
+				struct drm_bridge *bridge);
+struct drm_bridge_state *
+drm_atomic_get_new_bridge_state(struct drm_atomic_state *state,
+				struct drm_bridge *bridge);
+
+#endif /* DRM_ATOMIC_H_ */