Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 556 insertions, 0 deletions

diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
new file mode 100644
index 000000000..b0c680e6f
--- /dev/null
+++ b/include/drm/drm_modes.h
@@ -0,0 +1,556 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007-2008 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ * Copyright © 2014 Intel Corporation
+ *   Daniel Vetter <daniel.vetter@ffwll.ch>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef __DRM_MODES_H__
+#define __DRM_MODES_H__
+
+#include <linux/hdmi.h>
+
+#include <drm/drm_mode_object.h>
+#include <drm/drm_connector.h>
+
+struct videomode;
+
+/*
+ * Note on terminology:  here, for brevity and convenience, we refer to connector
+ * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
+ * DVI, etc.  And 'screen' refers to the whole of the visible display, which
+ * may span multiple monitors (and therefore multiple CRTC and connector
+ * structures).
+ */
+
+/**
+ * enum drm_mode_status - hardware support status of a mode
+ * @MODE_OK: Mode OK
+ * @MODE_HSYNC: hsync out of range
+ * @MODE_VSYNC: vsync out of range
+ * @MODE_H_ILLEGAL: mode has illegal horizontal timings
+ * @MODE_V_ILLEGAL: mode has illegal vertical timings
+ * @MODE_BAD_WIDTH: requires an unsupported linepitch
+ * @MODE_NOMODE: no mode with a matching name
+ * @MODE_NO_INTERLACE: interlaced mode not supported
+ * @MODE_NO_DBLESCAN: doublescan mode not supported
+ * @MODE_NO_VSCAN: multiscan mode not supported
+ * @MODE_MEM: insufficient video memory
+ * @MODE_VIRTUAL_X: mode width too large for specified virtual size
+ * @MODE_VIRTUAL_Y: mode height too large for specified virtual size
+ * @MODE_MEM_VIRT: insufficient video memory given virtual size
+ * @MODE_NOCLOCK: no fixed clock available
+ * @MODE_CLOCK_HIGH: clock required is too high
+ * @MODE_CLOCK_LOW: clock required is too low
+ * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
+ * @MODE_BAD_HVALUE: horizontal timing was out of range
+ * @MODE_BAD_VVALUE: vertical timing was out of range
+ * @MODE_BAD_VSCAN: VScan value out of range
+ * @MODE_HSYNC_NARROW: horizontal sync too narrow
+ * @MODE_HSYNC_WIDE: horizontal sync too wide
+ * @MODE_HBLANK_NARROW: horizontal blanking too narrow
+ * @MODE_HBLANK_WIDE: horizontal blanking too wide
+ * @MODE_VSYNC_NARROW: vertical sync too narrow
+ * @MODE_VSYNC_WIDE: vertical sync too wide
+ * @MODE_VBLANK_NARROW: vertical blanking too narrow
+ * @MODE_VBLANK_WIDE: vertical blanking too wide
+ * @MODE_PANEL: exceeds panel dimensions
+ * @MODE_INTERLACE_WIDTH: width too large for interlaced mode
+ * @MODE_ONE_WIDTH: only one width is supported
+ * @MODE_ONE_HEIGHT: only one height is supported
+ * @MODE_ONE_SIZE: only one resolution is supported
+ * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
+ * @MODE_NO_STEREO: stereo modes not supported
+ * @MODE_NO_420: ycbcr 420 modes not supported
+ * @MODE_STALE: mode has become stale
+ * @MODE_BAD: unspecified reason
+ * @MODE_ERROR: error condition
+ *
+ * This enum is used to filter out modes not supported by the driver/hardware
+ * combination.
+ */
+enum drm_mode_status {
+	MODE_OK = 0,
+	MODE_HSYNC,
+	MODE_VSYNC,
+	MODE_H_ILLEGAL,
+	MODE_V_ILLEGAL,
+	MODE_BAD_WIDTH,
+	MODE_NOMODE,
+	MODE_NO_INTERLACE,
+	MODE_NO_DBLESCAN,
+	MODE_NO_VSCAN,
+	MODE_MEM,
+	MODE_VIRTUAL_X,
+	MODE_VIRTUAL_Y,
+	MODE_MEM_VIRT,
+	MODE_NOCLOCK,
+	MODE_CLOCK_HIGH,
+	MODE_CLOCK_LOW,
+	MODE_CLOCK_RANGE,
+	MODE_BAD_HVALUE,
+	MODE_BAD_VVALUE,
+	MODE_BAD_VSCAN,
+	MODE_HSYNC_NARROW,
+	MODE_HSYNC_WIDE,
+	MODE_HBLANK_NARROW,
+	MODE_HBLANK_WIDE,
+	MODE_VSYNC_NARROW,
+	MODE_VSYNC_WIDE,
+	MODE_VBLANK_NARROW,
+	MODE_VBLANK_WIDE,
+	MODE_PANEL,
+	MODE_INTERLACE_WIDTH,
+	MODE_ONE_WIDTH,
+	MODE_ONE_HEIGHT,
+	MODE_ONE_SIZE,
+	MODE_NO_REDUCED,
+	MODE_NO_STEREO,
+	MODE_NO_420,
+	MODE_STALE = -3,
+	MODE_BAD = -2,
+	MODE_ERROR = -1
+};
+
+#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
+	.name = nm, .status = 0, .type = (t), .clock = (c), \
+	.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
+	.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
+	.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
+	.vscan = (vs), .flags = (f)
+
+/**
+ * DRM_MODE_RES_MM - Calculates the display size from resolution and DPI
+ * @res: The resolution in pixel
+ * @dpi: The number of dots per inch
+ */
+#define DRM_MODE_RES_MM(res, dpi)	\
+	(((res) * 254ul) / ((dpi) * 10ul))
+
+#define __DRM_MODE_INIT(pix, hd, vd, hd_mm, vd_mm) \
+	.type = DRM_MODE_TYPE_DRIVER, .clock = (pix), \
+	.hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
+	.htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
+	.vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
+	.height_mm = (vd_mm)
+
+/**
+ * DRM_MODE_INIT - Initialize display mode
+ * @hz: Vertical refresh rate in Hertz
+ * @hd: Horizontal resolution, width
+ * @vd: Vertical resolution, height
+ * @hd_mm: Display width in millimeters
+ * @vd_mm: Display height in millimeters
+ *
+ * This macro initializes a &drm_display_mode that contains information about
+ * refresh rate, resolution and physical size.
+ */
+#define DRM_MODE_INIT(hz, hd, vd, hd_mm, vd_mm) \
+	__DRM_MODE_INIT((hd) * (vd) * (hz) / 1000 /* kHz */, hd, vd, hd_mm, vd_mm)
+
+/**
+ * DRM_SIMPLE_MODE - Simple display mode
+ * @hd: Horizontal resolution, width
+ * @vd: Vertical resolution, height
+ * @hd_mm: Display width in millimeters
+ * @vd_mm: Display height in millimeters
+ *
+ * This macro initializes a &drm_display_mode that only contains info about
+ * resolution and physical size.
+ */
+#define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
+	__DRM_MODE_INIT(1 /* pass validation */, hd, vd, hd_mm, vd_mm)
+
+#define CRTC_INTERLACE_HALVE_V	(1 << 0) /* halve V values for interlacing */
+#define CRTC_STEREO_DOUBLE	(1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN		(1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN		(1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY	(CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
+
+#define DRM_MODE_FLAG_3D_MAX	DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
+
+#define DRM_MODE_MATCH_TIMINGS (1 << 0)
+#define DRM_MODE_MATCH_CLOCK (1 << 1)
+#define DRM_MODE_MATCH_FLAGS (1 << 2)
+#define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
+#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
+
+/**
+ * struct drm_display_mode - DRM kernel-internal display mode structure
+ * @hdisplay: horizontal display size
+ * @hsync_start: horizontal sync start
+ * @hsync_end: horizontal sync end
+ * @htotal: horizontal total size
+ * @hskew: horizontal skew?!
+ * @vdisplay: vertical display size
+ * @vsync_start: vertical sync start
+ * @vsync_end: vertical sync end
+ * @vtotal: vertical total size
+ * @vscan: vertical scan?!
+ * @crtc_hdisplay: hardware mode horizontal display size
+ * @crtc_hblank_start: hardware mode horizontal blank start
+ * @crtc_hblank_end: hardware mode horizontal blank end
+ * @crtc_hsync_start: hardware mode horizontal sync start
+ * @crtc_hsync_end: hardware mode horizontal sync end
+ * @crtc_htotal: hardware mode horizontal total size
+ * @crtc_hskew: hardware mode horizontal skew?!
+ * @crtc_vdisplay: hardware mode vertical display size
+ * @crtc_vblank_start: hardware mode vertical blank start
+ * @crtc_vblank_end: hardware mode vertical blank end
+ * @crtc_vsync_start: hardware mode vertical sync start
+ * @crtc_vsync_end: hardware mode vertical sync end
+ * @crtc_vtotal: hardware mode vertical total size
+ *
+ * This is the kernel API display mode information structure. For the
+ * user-space version see struct drm_mode_modeinfo.
+ *
+ * The horizontal and vertical timings are defined per the following diagram.
+ *
+ * ::
+ *
+ *
+ *               Active                 Front           Sync           Back
+ *              Region                 Porch                          Porch
+ *     <-----------------------><----------------><-------------><-------------->
+ *       //////////////////////|
+ *      ////////////////////// |
+ *     //////////////////////  |..................               ................
+ *                                                _______________
+ *     <----- [hv]display ----->
+ *     <------------- [hv]sync_start ------------>
+ *     <--------------------- [hv]sync_end --------------------->
+ *     <-------------------------------- [hv]total ----------------------------->*
+ *
+ * This structure contains two copies of timings. First are the plain timings,
+ * which specify the logical mode, as it would be for a progressive 1:1 scanout
+ * at the refresh rate userspace can observe through vblank timestamps. Then
+ * there's the hardware timings, which are corrected for interlacing,
+ * double-clocking and similar things. They are provided as a convenience, and
+ * can be appropriately computed using drm_mode_set_crtcinfo().
+ *
+ * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
+ */
+struct drm_display_mode {
+	/**
+	 * @clock:
+	 *
+	 * Pixel clock in kHz.
+	 */
+	int clock;		/* in kHz */
+	u16 hdisplay;
+	u16 hsync_start;
+	u16 hsync_end;
+	u16 htotal;
+	u16 hskew;
+	u16 vdisplay;
+	u16 vsync_start;
+	u16 vsync_end;
+	u16 vtotal;
+	u16 vscan;
+	/**
+	 * @flags:
+	 *
+	 * Sync and timing flags:
+	 *
+	 *  - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
+	 *  - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
+	 *  - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
+	 *  - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
+	 *  - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
+	 *  - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
+	 *  - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
+	 *  - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
+	 *  - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
+	 *  - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
+	 *  - DRM_MODE_FLAG_BCAST: <deprecated>
+	 *  - DRM_MODE_FLAG_PIXMUX: <deprecated>
+	 *  - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
+	 *  - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
+	 *
+	 * Additionally there's flags to specify how 3D modes are packed:
+	 *
+	 *  - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
+	 *  - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
+	 *  - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
+	 *  - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
+	 *  - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
+	 *  - DRM_MODE_FLAG_3D_L_DEPTH: ?
+	 *  - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
+	 *  - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
+	 *    parts.
+	 *  - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
+	 *    right parts.
+	 */
+	u32 flags;
+
+	/**
+	 * @crtc_clock:
+	 *
+	 * Actual pixel or dot clock in the hardware. This differs from the
+	 * logical @clock when e.g. using interlacing, double-clocking, stereo
+	 * modes or other fancy stuff that changes the timings and signals
+	 * actually sent over the wire.
+	 *
+	 * This is again in kHz.
+	 *
+	 * Note that with digital outputs like HDMI or DP there's usually a
+	 * massive confusion between the dot clock and the signal clock at the
+	 * bit encoding level. Especially when a 8b/10b encoding is used and the
+	 * difference is exactly a factor of 10.
+	 */
+	int crtc_clock;
+	u16 crtc_hdisplay;
+	u16 crtc_hblank_start;
+	u16 crtc_hblank_end;
+	u16 crtc_hsync_start;
+	u16 crtc_hsync_end;
+	u16 crtc_htotal;
+	u16 crtc_hskew;
+	u16 crtc_vdisplay;
+	u16 crtc_vblank_start;
+	u16 crtc_vblank_end;
+	u16 crtc_vsync_start;
+	u16 crtc_vsync_end;
+	u16 crtc_vtotal;
+
+	/**
+	 * @width_mm:
+	 *
+	 * Addressable size of the output in mm, projectors should set this to
+	 * 0.
+	 */
+	u16 width_mm;
+
+	/**
+	 * @height_mm:
+	 *
+	 * Addressable size of the output in mm, projectors should set this to
+	 * 0.
+	 */
+	u16 height_mm;
+
+	/**
+	 * @type:
+	 *
+	 * A bitmask of flags, mostly about the source of a mode. Possible flags
+	 * are:
+	 *
+	 *  - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
+	 *    resolution of an LCD panel. There should only be one preferred
+	 *    mode per connector at any given time.
+	 *  - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
+	 *    them really. Drivers must set this bit for all modes they create
+	 *    and expose to userspace.
+	 *  - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel
+	 *    command line.
+	 *
+	 * Plus a big list of flags which shouldn't be used at all, but are
+	 * still around since these flags are also used in the userspace ABI.
+	 * We no longer accept modes with these types though:
+	 *
+	 *  - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
+	 *    Use DRM_MODE_TYPE_DRIVER instead.
+	 *  - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
+	 *    DRM_MODE_TYPE_PREFERRED instead.
+	 *  - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
+	 *    which are stuck around for hysterical raisins only. No one has an
+	 *    idea what they were meant for. Don't use.
+	 */
+	u8 type;
+
+	/**
+	 * @expose_to_userspace:
+	 *
+	 * Indicates whether the mode is to be exposed to the userspace.
+	 * This is to maintain a set of exposed modes while preparing
+	 * user-mode's list in drm_mode_getconnector ioctl. The purpose of
+	 * this only lies in the ioctl function, and is not to be used
+	 * outside the function.
+	 */
+	bool expose_to_userspace;
+
+	/**
+	 * @head:
+	 *
+	 * struct list_head for mode lists.
+	 */
+	struct list_head head;
+
+	/**
+	 * @name:
+	 *
+	 * Human-readable name of the mode, filled out with drm_mode_set_name().
+	 */
+	char name[DRM_DISPLAY_MODE_LEN];
+
+	/**
+	 * @status:
+	 *
+	 * Status of the mode, used to filter out modes not supported by the
+	 * hardware. See enum &drm_mode_status.
+	 */
+	enum drm_mode_status status;
+
+	/**
+	 * @picture_aspect_ratio:
+	 *
+	 * Field for setting the HDMI picture aspect ratio of a mode.
+	 */
+	enum hdmi_picture_aspect picture_aspect_ratio;
+
+};
+
+/**
+ * DRM_MODE_FMT - printf string for &struct drm_display_mode
+ */
+#define DRM_MODE_FMT    "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
+
+/**
+ * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
+ * @m: display mode
+ */
+#define DRM_MODE_ARG(m) \
+	(m)->name, drm_mode_vrefresh(m), (m)->clock, \
+	(m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
+	(m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
+	(m)->type, (m)->flags
+
+#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
+
+/**
+ * drm_mode_is_stereo - check for stereo mode flags
+ * @mode: drm_display_mode to check
+ *
+ * Returns:
+ * True if the mode is one of the stereo modes (like side-by-side), false if
+ * not.
+ */
+static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
+{
+	return mode->flags & DRM_MODE_FLAG_3D_MASK;
+}
+
+struct drm_connector;
+struct drm_cmdline_mode;
+
+struct drm_display_mode *drm_mode_create(struct drm_device *dev);
+void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
+void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
+			       const struct drm_display_mode *in);
+int drm_mode_convert_umode(struct drm_device *dev,
+			   struct drm_display_mode *out,
+			   const struct drm_mode_modeinfo *in);
+void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
+void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
+bool drm_mode_is_420_only(const struct drm_display_info *display,
+			  const struct drm_display_mode *mode);
+bool drm_mode_is_420_also(const struct drm_display_info *display,
+			  const struct drm_display_mode *mode);
+bool drm_mode_is_420(const struct drm_display_info *display,
+		     const struct drm_display_mode *mode);
+
+struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
+				      int hdisplay, int vdisplay, int vrefresh,
+				      bool reduced, bool interlaced,
+				      bool margins);
+struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
+				      int hdisplay, int vdisplay, int vrefresh,
+				      bool interlaced, int margins);
+struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
+					      int hdisplay, int vdisplay,
+					      int vrefresh, bool interlaced,
+					      int margins,
+					      int GTF_M, int GTF_2C,
+					      int GTF_K, int GTF_2J);
+void drm_display_mode_from_videomode(const struct videomode *vm,
+				     struct drm_display_mode *dmode);
+void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
+				   struct videomode *vm);
+void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
+
+#if defined(CONFIG_OF)
+int of_get_drm_display_mode(struct device_node *np,
+			    struct drm_display_mode *dmode, u32 *bus_flags,
+			    int index);
+int of_get_drm_panel_display_mode(struct device_node *np,
+				  struct drm_display_mode *dmode, u32 *bus_flags);
+#else
+static inline int of_get_drm_display_mode(struct device_node *np,
+					  struct drm_display_mode *dmode,
+					  u32 *bus_flags, int index)
+{
+	return -EINVAL;
+}
+
+static inline int of_get_drm_panel_display_mode(struct device_node *np,
+						struct drm_display_mode *dmode, u32 *bus_flags)
+{
+	return -EINVAL;
+}
+#endif
+
+void drm_mode_set_name(struct drm_display_mode *mode);
+int drm_mode_vrefresh(const struct drm_display_mode *mode);
+void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay);
+
+void drm_mode_set_crtcinfo(struct drm_display_mode *p,
+			   int adjust_flags);
+void drm_mode_copy(struct drm_display_mode *dst,
+		   const struct drm_display_mode *src);
+void drm_mode_init(struct drm_display_mode *dst,
+		   const struct drm_display_mode *src);
+struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
+					    const struct drm_display_mode *mode);
+bool drm_mode_match(const struct drm_display_mode *mode1,
+		    const struct drm_display_mode *mode2,
+		    unsigned int match_flags);
+bool drm_mode_equal(const struct drm_display_mode *mode1,
+		    const struct drm_display_mode *mode2);
+bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
+			      const struct drm_display_mode *mode2);
+bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
+					const struct drm_display_mode *mode2);
+
+/* for use by the crtc helper probe functions */
+enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev,
+					      const struct drm_display_mode *mode);
+enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
+					    int maxX, int maxY);
+enum drm_mode_status
+drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
+			   struct drm_connector *connector);
+void drm_mode_prune_invalid(struct drm_device *dev,
+			    struct list_head *mode_list, bool verbose);
+void drm_mode_sort(struct list_head *mode_list);
+void drm_connector_list_update(struct drm_connector *connector);
+
+/* parsing cmdline modes */
+bool
+drm_mode_parse_command_line_for_connector(const char *mode_option,
+					  const struct drm_connector *connector,
+					  struct drm_cmdline_mode *mode);
+struct drm_display_mode *
+drm_mode_create_from_cmdline_mode(struct drm_device *dev,
+				  struct drm_cmdline_mode *cmd);
+
+#endif /* __DRM_MODES_H__ */