Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 414 insertions, 0 deletions

diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
new file mode 100644
index 000000000..9cfcc3baa
--- /dev/null
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -0,0 +1,414 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for binding nvidia,tegra210-car.
+ *
+ * The first 224 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 224 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 224 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA210_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA210_CAR_H
+
+/* 0 */
+/* 1 */
+/* 2 */
+#define TEGRA210_CLK_ISPB 3
+#define TEGRA210_CLK_RTC 4
+#define TEGRA210_CLK_TIMER 5
+#define TEGRA210_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+#define TEGRA210_CLK_GPIO 8
+#define TEGRA210_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA210_CLK_I2S1 11
+#define TEGRA210_CLK_I2C1 12
+/* 13 */
+#define TEGRA210_CLK_SDMMC1 14
+#define TEGRA210_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA210_CLK_PWM 17
+#define TEGRA210_CLK_I2S2 18
+/* 19 */
+/* 20 (register bit affects vi and vi_sensor) */
+/* 21 */
+#define TEGRA210_CLK_USBD 22
+#define TEGRA210_CLK_ISPA 23
+/* 24 */
+/* 25 */
+#define TEGRA210_CLK_DISP2 26
+#define TEGRA210_CLK_DISP1 27
+#define TEGRA210_CLK_HOST1X 28
+/* 29 */
+#define TEGRA210_CLK_I2S0 30
+/* 31 */
+
+#define TEGRA210_CLK_MC 32
+#define TEGRA210_CLK_AHBDMA 33
+#define TEGRA210_CLK_APBDMA 34
+/* 35 */
+/* 36 */
+/* 37 */
+#define TEGRA210_CLK_PMC 38
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA210_CLK_KFUSE 40
+#define TEGRA210_CLK_SBC1 41
+/* 42 */
+/* 43 */
+#define TEGRA210_CLK_SBC2 44
+/* 45 */
+#define TEGRA210_CLK_SBC3 46
+#define TEGRA210_CLK_I2C5 47
+#define TEGRA210_CLK_DSIA 48
+/* 49 */
+/* 50 */
+/* 51 */
+#define TEGRA210_CLK_CSI 52
+/* 53 */
+#define TEGRA210_CLK_I2C2 54
+#define TEGRA210_CLK_UARTC 55
+#define TEGRA210_CLK_MIPI_CAL 56
+#define TEGRA210_CLK_EMC 57
+#define TEGRA210_CLK_USB2 58
+/* 59 */
+/* 60 */
+/* 61 */
+/* 62 */
+#define TEGRA210_CLK_BSEV 63
+
+/* 64 */
+#define TEGRA210_CLK_UARTD 65
+/* 66 */
+#define TEGRA210_CLK_I2C3 67
+#define TEGRA210_CLK_SBC4 68
+#define TEGRA210_CLK_SDMMC3 69
+#define TEGRA210_CLK_PCIE 70
+#define TEGRA210_CLK_OWR 71
+#define TEGRA210_CLK_AFI 72
+#define TEGRA210_CLK_CSITE 73
+/* 74 */
+/* 75 */
+#define TEGRA210_CLK_LA 76
+/* 77 */
+#define TEGRA210_CLK_SOC_THERM 78
+#define TEGRA210_CLK_DTV 79
+/* 80 */
+#define TEGRA210_CLK_I2CSLOW 81
+#define TEGRA210_CLK_DSIB 82
+#define TEGRA210_CLK_TSEC 83
+/* 84 */
+/* 85 */
+/* 86 */
+/* 87 */
+/* 88 */
+#define TEGRA210_CLK_XUSB_HOST 89
+/* 90 */
+/* 91 */
+#define TEGRA210_CLK_CSUS 92
+/* 93 */
+/* 94 */
+/* 95 (bit affects xusb_dev and xusb_dev_src) */
+
+/* 96 */
+/* 97 */
+/* 98 */
+#define TEGRA210_CLK_MSELECT 99
+#define TEGRA210_CLK_TSENSOR 100
+#define TEGRA210_CLK_I2S3 101
+#define TEGRA210_CLK_I2S4 102
+#define TEGRA210_CLK_I2C4 103
+/* 104 */
+/* 105 */
+#define TEGRA210_CLK_D_AUDIO 106
+#define TEGRA210_CLK_APB2APE 107
+/* 108 */
+/* 109 */
+/* 110 */
+#define TEGRA210_CLK_HDA2CODEC_2X 111
+/* 112 */
+/* 113 */
+/* 114 */
+/* 115 */
+/* 116 */
+/* 117 */
+#define TEGRA210_CLK_SPDIF_2X 118
+#define TEGRA210_CLK_ACTMON 119
+#define TEGRA210_CLK_EXTERN1 120
+#define TEGRA210_CLK_EXTERN2 121
+#define TEGRA210_CLK_EXTERN3 122
+#define TEGRA210_CLK_SATA_OOB 123
+#define TEGRA210_CLK_SATA 124
+#define TEGRA210_CLK_HDA 125
+/* 126 */
+/* 127 */
+
+#define TEGRA210_CLK_HDA2HDMI 128
+/* 129 */
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+#define TEGRA210_CLK_CEC 136
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* (bit affects xusb_falcon_src, xusb_fs_src, xusb_host_src and xusb_ss_src) */
+#define TEGRA210_CLK_XUSB_GATE 143
+#define TEGRA210_CLK_CILAB 144
+#define TEGRA210_CLK_CILCD 145
+#define TEGRA210_CLK_CILE 146
+#define TEGRA210_CLK_DSIALP 147
+#define TEGRA210_CLK_DSIBLP 148
+#define TEGRA210_CLK_ENTROPY 149
+/* 150 */
+/* 151 */
+#define TEGRA210_CLK_DP2 152
+/* 153 */
+/* 154 */
+/* 155 (bit affects dfll_ref and dfll_soc) */
+#define TEGRA210_CLK_XUSB_SS 156
+/* 157 */
+/* 158 */
+/* 159 */
+
+/* 160 */
+#define TEGRA210_CLK_DMIC1 161
+#define TEGRA210_CLK_DMIC2 162
+/* 163 */
+/* 164 */
+/* 165 */
+#define TEGRA210_CLK_I2C6 166
+/* 167 */
+/* 168 */
+/* 169 */
+/* 170 */
+#define TEGRA210_CLK_VIM2_CLK 171
+/* 172 */
+#define TEGRA210_CLK_MIPIBIF 173
+/* 174 */
+/* 175 */
+/* 176 */
+#define TEGRA210_CLK_CLK72MHZ 177
+#define TEGRA210_CLK_VIC03 178
+/* 179 */
+/* 180 */
+#define TEGRA210_CLK_DPAUX 181
+#define TEGRA210_CLK_SOR0 182
+#define TEGRA210_CLK_SOR1 183
+#define TEGRA210_CLK_GPU 184
+#define TEGRA210_CLK_DBGAPB 185
+/* 186 */
+#define TEGRA210_CLK_PLL_P_OUT_ADSP 187
+/* 188 ((bit affects pll_a_out_adsp and pll_a_out0_out_adsp)*/
+#define TEGRA210_CLK_PLL_G_REF 189
+/* 190 */
+/* 191 */
+
+/* 192 */
+#define TEGRA210_CLK_SDMMC_LEGACY 193
+#define TEGRA210_CLK_NVDEC 194
+#define TEGRA210_CLK_NVJPG 195
+/* 196 */
+#define TEGRA210_CLK_DMIC3 197
+#define TEGRA210_CLK_APE 198
+#define TEGRA210_CLK_ADSP 199
+/* 200 */
+/* 201 */
+#define TEGRA210_CLK_MAUD 202
+/* 203 */
+/* 204 */
+/* 205 */
+#define TEGRA210_CLK_TSECB 206
+#define TEGRA210_CLK_DPAUX1 207
+#define TEGRA210_CLK_VI_I2C 208
+#define TEGRA210_CLK_HSIC_TRK 209
+#define TEGRA210_CLK_USB2_TRK 210
+#define TEGRA210_CLK_QSPI 211
+#define TEGRA210_CLK_UARTAPE 212
+/* 213 */
+/* 214 */
+/* 215 */
+/* 216 */
+/* 217 */
+#define TEGRA210_CLK_ADSP_NEON 218
+#define TEGRA210_CLK_NVENC 219
+#define TEGRA210_CLK_IQC2 220
+#define TEGRA210_CLK_IQC1 221
+#define TEGRA210_CLK_SOR_SAFE 222
+#define TEGRA210_CLK_PLL_P_OUT_CPU 223
+
+
+#define TEGRA210_CLK_UARTB 224
+#define TEGRA210_CLK_VFIR 225
+#define TEGRA210_CLK_SPDIF_IN 226
+#define TEGRA210_CLK_SPDIF_OUT 227
+#define TEGRA210_CLK_VI 228
+#define TEGRA210_CLK_VI_SENSOR 229
+#define TEGRA210_CLK_FUSE 230
+#define TEGRA210_CLK_FUSE_BURN 231
+#define TEGRA210_CLK_CLK_32K 232
+#define TEGRA210_CLK_CLK_M 233
+#define TEGRA210_CLK_CLK_M_DIV2 234
+#define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_OSC_DIV2 234
+#define TEGRA210_CLK_OSC_DIV4 235
+#define TEGRA210_CLK_PLL_REF 236
+#define TEGRA210_CLK_PLL_C 237
+#define TEGRA210_CLK_PLL_C_OUT1 238
+#define TEGRA210_CLK_PLL_C2 239
+#define TEGRA210_CLK_PLL_C3 240
+#define TEGRA210_CLK_PLL_M 241
+#define TEGRA210_CLK_PLL_M_OUT1 242
+#define TEGRA210_CLK_PLL_P 243
+#define TEGRA210_CLK_PLL_P_OUT1 244
+#define TEGRA210_CLK_PLL_P_OUT2 245
+#define TEGRA210_CLK_PLL_P_OUT3 246
+#define TEGRA210_CLK_PLL_P_OUT4 247
+#define TEGRA210_CLK_PLL_A 248
+#define TEGRA210_CLK_PLL_A_OUT0 249
+#define TEGRA210_CLK_PLL_D 250
+#define TEGRA210_CLK_PLL_D_OUT0 251
+#define TEGRA210_CLK_PLL_D2 252
+#define TEGRA210_CLK_PLL_D2_OUT0 253
+#define TEGRA210_CLK_PLL_U 254
+#define TEGRA210_CLK_PLL_U_480M 255
+
+#define TEGRA210_CLK_PLL_U_60M 256
+#define TEGRA210_CLK_PLL_U_48M 257
+/* 258 */
+#define TEGRA210_CLK_PLL_X 259
+#define TEGRA210_CLK_PLL_X_OUT0 260
+#define TEGRA210_CLK_PLL_RE_VCO 261
+#define TEGRA210_CLK_PLL_RE_OUT 262
+#define TEGRA210_CLK_PLL_E 263
+#define TEGRA210_CLK_SPDIF_IN_SYNC 264
+#define TEGRA210_CLK_I2S0_SYNC 265
+#define TEGRA210_CLK_I2S1_SYNC 266
+#define TEGRA210_CLK_I2S2_SYNC 267
+#define TEGRA210_CLK_I2S3_SYNC 268
+#define TEGRA210_CLK_I2S4_SYNC 269
+#define TEGRA210_CLK_VIMCLK_SYNC 270
+#define TEGRA210_CLK_AUDIO0 271
+#define TEGRA210_CLK_AUDIO1 272
+#define TEGRA210_CLK_AUDIO2 273
+#define TEGRA210_CLK_AUDIO3 274
+#define TEGRA210_CLK_AUDIO4 275
+#define TEGRA210_CLK_SPDIF 276
+/* 277 */
+#define TEGRA210_CLK_QSPI_PM 278
+/* 279 */
+/* 280 */
+#define TEGRA210_CLK_SOR0_LVDS 281 /* deprecated */
+#define TEGRA210_CLK_SOR0_OUT 281
+#define TEGRA210_CLK_SOR1_OUT 282
+/* 283 */
+#define TEGRA210_CLK_XUSB_HOST_SRC 284
+#define TEGRA210_CLK_XUSB_FALCON_SRC 285
+#define TEGRA210_CLK_XUSB_FS_SRC 286
+#define TEGRA210_CLK_XUSB_SS_SRC 287
+
+#define TEGRA210_CLK_XUSB_DEV_SRC 288
+#define TEGRA210_CLK_XUSB_DEV 289
+#define TEGRA210_CLK_XUSB_HS_SRC 290
+#define TEGRA210_CLK_SCLK 291
+#define TEGRA210_CLK_HCLK 292
+#define TEGRA210_CLK_PCLK 293
+#define TEGRA210_CLK_CCLK_G 294
+#define TEGRA210_CLK_CCLK_LP 295
+#define TEGRA210_CLK_DFLL_REF 296
+#define TEGRA210_CLK_DFLL_SOC 297
+#define TEGRA210_CLK_VI_SENSOR2 298
+#define TEGRA210_CLK_PLL_P_OUT5 299
+#define TEGRA210_CLK_CML0 300
+#define TEGRA210_CLK_CML1 301
+#define TEGRA210_CLK_PLL_C4 302
+#define TEGRA210_CLK_PLL_DP 303
+#define TEGRA210_CLK_PLL_E_MUX 304
+#define TEGRA210_CLK_PLL_MB 305
+#define TEGRA210_CLK_PLL_A1 306
+#define TEGRA210_CLK_PLL_D_DSI_OUT 307
+#define TEGRA210_CLK_PLL_C4_OUT0 308
+#define TEGRA210_CLK_PLL_C4_OUT1 309
+#define TEGRA210_CLK_PLL_C4_OUT2 310
+#define TEGRA210_CLK_PLL_C4_OUT3 311
+#define TEGRA210_CLK_PLL_U_OUT 312
+#define TEGRA210_CLK_PLL_U_OUT1 313
+#define TEGRA210_CLK_PLL_U_OUT2 314
+#define TEGRA210_CLK_USB2_HSIC_TRK 315
+#define TEGRA210_CLK_PLL_P_OUT_HSIO 316
+#define TEGRA210_CLK_PLL_P_OUT_XUSB 317
+#define TEGRA210_CLK_XUSB_SSP_SRC 318
+#define TEGRA210_CLK_PLL_RE_OUT1 319
+#define TEGRA210_CLK_PLL_MB_UD 320
+#define TEGRA210_CLK_PLL_P_UD 321
+#define TEGRA210_CLK_ISP 322
+#define TEGRA210_CLK_PLL_A_OUT_ADSP 323
+#define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
+/* 325 */
+#define TEGRA210_CLK_OSC 326
+#define TEGRA210_CLK_CSI_TPG 327
+/* 328 */
+/* 329 */
+/* 330 */
+/* 331 */
+/* 332 */
+/* 333 */
+/* 334 */
+/* 335 */
+/* 336 */
+/* 337 */
+/* 338 */
+/* 339 */
+/* 340 */
+/* 341 */
+/* 342 */
+/* 343 */
+/* 344 */
+/* 345 */
+/* 346 */
+/* 347 */
+/* 348 */
+/* 349 */
+
+#define TEGRA210_CLK_AUDIO0_MUX 350
+#define TEGRA210_CLK_AUDIO1_MUX 351
+#define TEGRA210_CLK_AUDIO2_MUX 352
+#define TEGRA210_CLK_AUDIO3_MUX 353
+#define TEGRA210_CLK_AUDIO4_MUX 354
+#define TEGRA210_CLK_SPDIF_MUX 355
+/* 356 */
+/* 357 */
+/* 358 */
+#define TEGRA210_CLK_DSIA_MUX 359
+#define TEGRA210_CLK_DSIB_MUX 360
+/* 361 */
+#define TEGRA210_CLK_XUSB_SS_DIV2 362
+
+#define TEGRA210_CLK_PLL_M_UD 363
+#define TEGRA210_CLK_PLL_C_UD 364
+#define TEGRA210_CLK_SCLK_MUX 365
+
+#define TEGRA210_CLK_ACLK 370
+
+#define TEGRA210_CLK_DMIC1_SYNC_CLK 388
+#define TEGRA210_CLK_DMIC1_SYNC_CLK_MUX 389
+#define TEGRA210_CLK_DMIC2_SYNC_CLK 390
+#define TEGRA210_CLK_DMIC2_SYNC_CLK_MUX 391
+#define TEGRA210_CLK_DMIC3_SYNC_CLK 392
+#define TEGRA210_CLK_DMIC3_SYNC_CLK_MUX 393
+
+#define TEGRA210_CLK_CLK_MAX 394
+
+#endif	/* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */