Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 275 insertions, 0 deletions

diff --git a/include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h b/include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
new file mode 100644
index 000000000..a200f546d
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
@@ -0,0 +1,275 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_STARFIVE_JH7100_H__
+#define __DT_BINDINGS_PINCTRL_STARFIVE_JH7100_H__
+
+#define PAD_GPIO_OFFSET		0
+#define PAD_FUNC_SHARE_OFFSET	64
+#define PAD_GPIO(x)		(PAD_GPIO_OFFSET + (x))
+#define PAD_FUNC_SHARE(x)	(PAD_FUNC_SHARE_OFFSET + (x))
+
+/*
+ * GPIOMUX bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 8 |     7    |     6    |  5 - 0  |
+ *  |  dout   |  doen   |  din   | dout rev | doen rev | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * dout rev: output signal reverse bit
+ * doen rev: output enable signal reverse bit
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((dout) & 0x80000000) >> (31 - 7)) | (((dout) & 0xff) << 24) | \
+		(((doen) & 0x80000000) >> (31 - 6)) | (((doen) & 0xff) << 16) | \
+		(((din) & 0xff) << 8) | \
+		((n) & 0x3f))
+
+#define GPO_REVERSE				0x80000000
+
+#define GPO_LOW					0
+#define GPO_HIGH				1
+#define GPO_ENABLE				0
+#define GPO_DISABLE				1
+#define GPO_CLK_GMAC_PAPHYREF			2
+#define GPO_JTAG_TDO				3
+#define GPO_JTAG_TDO_OEN			4
+#define GPO_DMIC_CLK_OUT			5
+#define GPO_DSP_JTDOEN_PAD			6
+#define GPO_DSP_JTDO_PAD			7
+#define GPO_I2C0_PAD_SCK_OE			8
+#define GPO_I2C0_PAD_SCK_OEN			(GPO_I2C0_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C0_PAD_SDA_OE			9
+#define GPO_I2C0_PAD_SDA_OEN			(GPO_I2C0_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SCK_OE			10
+#define GPO_I2C1_PAD_SCK_OEN			(GPO_I2C1_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SDA_OE			11
+#define GPO_I2C1_PAD_SDA_OEN			(GPO_I2C1_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SCK_OE			12
+#define GPO_I2C2_PAD_SCK_OEN			(GPO_I2C2_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SDA_OE			13
+#define GPO_I2C2_PAD_SDA_OEN			(GPO_I2C2_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SCK_OE			14
+#define GPO_I2C3_PAD_SCK_OEN			(GPO_I2C3_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SDA_OE			15
+#define GPO_I2C3_PAD_SDA_OEN			(GPO_I2C3_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2SRX_BCLK_OUT			16
+#define GPO_I2SRX_BCLK_OUT_OEN			17
+#define GPO_I2SRX_LRCK_OUT			18
+#define GPO_I2SRX_LRCK_OUT_OEN			19
+#define GPO_I2SRX_MCLK_OUT			20
+#define GPO_I2STX_BCLK_OUT			21
+#define GPO_I2STX_BCLK_OUT_OEN			22
+#define GPO_I2STX_LRCK_OUT			23
+#define GPO_I2STX_LRCK_OUT_OEN			24
+#define GPO_I2STX_MCLK_OUT			25
+#define GPO_I2STX_SDOUT0			26
+#define GPO_I2STX_SDOUT1			27
+#define GPO_LCD_PAD_CSM_N			28
+#define GPO_PWM_PAD_OE_N_BIT0			29
+#define GPO_PWM_PAD_OE_N_BIT1			30
+#define GPO_PWM_PAD_OE_N_BIT2			31
+#define GPO_PWM_PAD_OE_N_BIT3			32
+#define GPO_PWM_PAD_OE_N_BIT4			33
+#define GPO_PWM_PAD_OE_N_BIT5			34
+#define GPO_PWM_PAD_OE_N_BIT6			35
+#define GPO_PWM_PAD_OE_N_BIT7			36
+#define GPO_PWM_PAD_OUT_BIT0			37
+#define GPO_PWM_PAD_OUT_BIT1			38
+#define GPO_PWM_PAD_OUT_BIT2			39
+#define GPO_PWM_PAD_OUT_BIT3			40
+#define GPO_PWM_PAD_OUT_BIT4			41
+#define GPO_PWM_PAD_OUT_BIT5			42
+#define GPO_PWM_PAD_OUT_BIT6			43
+#define GPO_PWM_PAD_OUT_BIT7			44
+#define GPO_PWMDAC_LEFT_OUT			45
+#define GPO_PWMDAC_RIGHT_OUT			46
+#define GPO_QSPI_CSN1_OUT			47
+#define GPO_QSPI_CSN2_OUT			48
+#define GPO_QSPI_CSN3_OUT			49
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST0	50
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST1	51
+#define GPO_REGISTER32_SCFG_GMAC_PHY_RSTN	52
+#define GPO_SDIO0_PAD_CARD_POWER_EN		53
+#define GPO_SDIO0_PAD_CCLK_OUT			54
+#define GPO_SDIO0_PAD_CCMD_OE			55
+#define GPO_SDIO0_PAD_CCMD_OEN			(GPO_SDIO0_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CCMD_OUT			56
+#define GPO_SDIO0_PAD_CDATA_OE_BIT0		57
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT0		(GPO_SDIO0_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT1		58
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT1		(GPO_SDIO0_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT2		59
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT2		(GPO_SDIO0_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT3		60
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT3		(GPO_SDIO0_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT4		61
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT4		(GPO_SDIO0_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT5		62
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT5		(GPO_SDIO0_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT6		63
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT6		(GPO_SDIO0_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT7		64
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT7		(GPO_SDIO0_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT0		65
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT1		66
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT2		67
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT3		68
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT4		69
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT5		70
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT6		71
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT7		72
+#define GPO_SDIO0_PAD_RST_N			73
+#define GPO_SDIO1_PAD_CARD_POWER_EN		74
+#define GPO_SDIO1_PAD_CCLK_OUT			75
+#define GPO_SDIO1_PAD_CCMD_OE			76
+#define GPO_SDIO1_PAD_CCMD_OEN			(GPO_SDIO1_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CCMD_OUT			77
+#define GPO_SDIO1_PAD_CDATA_OE_BIT0		78
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT0		(GPO_SDIO1_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT1		79
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT1		(GPO_SDIO1_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT2		80
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT2		(GPO_SDIO1_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT3		81
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT3		(GPO_SDIO1_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT4		82
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT4		(GPO_SDIO1_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT5		83
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT5		(GPO_SDIO1_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT6		84
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT6		(GPO_SDIO1_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT7		85
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT7		(GPO_SDIO1_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT0		86
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT1		87
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT2		88
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT3		89
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT4		90
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT5		91
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT6		92
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT7		93
+#define GPO_SDIO1_PAD_RST_N			94
+#define GPO_SPDIF_TX_SDOUT			95
+#define GPO_SPDIF_TX_SDOUT_OEN			96
+#define GPO_SPI0_PAD_OE_N			97
+#define GPO_SPI0_PAD_SCK_OUT			98
+#define GPO_SPI0_PAD_SS_0_N			99
+#define GPO_SPI0_PAD_SS_1_N			100
+#define GPO_SPI0_PAD_TXD			101
+#define GPO_SPI1_PAD_OE_N			102
+#define GPO_SPI1_PAD_SCK_OUT			103
+#define GPO_SPI1_PAD_SS_0_N			104
+#define GPO_SPI1_PAD_SS_1_N			105
+#define GPO_SPI1_PAD_TXD			106
+#define GPO_SPI2_PAD_OE_N			107
+#define GPO_SPI2_PAD_SCK_OUT			108
+#define GPO_SPI2_PAD_SS_0_N			109
+#define GPO_SPI2_PAD_SS_1_N			110
+#define GPO_SPI2_PAD_TXD			111
+#define GPO_SPI2AHB_PAD_OE_N_BIT0		112
+#define GPO_SPI2AHB_PAD_OE_N_BIT1		113
+#define GPO_SPI2AHB_PAD_OE_N_BIT2		114
+#define GPO_SPI2AHB_PAD_OE_N_BIT3		115
+#define GPO_SPI2AHB_PAD_TXD_BIT0		116
+#define GPO_SPI2AHB_PAD_TXD_BIT1		117
+#define GPO_SPI2AHB_PAD_TXD_BIT2		118
+#define GPO_SPI2AHB_PAD_TXD_BIT3		119
+#define GPO_SPI3_PAD_OE_N			120
+#define GPO_SPI3_PAD_SCK_OUT			121
+#define GPO_SPI3_PAD_SS_0_N			122
+#define GPO_SPI3_PAD_SS_1_N			123
+#define GPO_SPI3_PAD_TXD			124
+#define GPO_UART0_PAD_DTRN			125
+#define GPO_UART0_PAD_RTSN			126
+#define GPO_UART0_PAD_SOUT			127
+#define GPO_UART1_PAD_SOUT			128
+#define GPO_UART2_PAD_DTR_N			129
+#define GPO_UART2_PAD_RTS_N			130
+#define GPO_UART2_PAD_SOUT			131
+#define GPO_UART3_PAD_SOUT			132
+#define GPO_USB_DRV_BUS				133
+
+#define GPI_CPU_JTAG_TCK			0
+#define GPI_CPU_JTAG_TDI			1
+#define GPI_CPU_JTAG_TMS			2
+#define GPI_CPU_JTAG_TRST			3
+#define GPI_DMIC_SDIN_BIT0			4
+#define GPI_DMIC_SDIN_BIT1			5
+#define GPI_DSP_JTCK_PAD			6
+#define GPI_DSP_JTDI_PAD			7
+#define GPI_DSP_JTMS_PAD			8
+#define GPI_DSP_TRST_PAD			9
+#define GPI_I2C0_PAD_SCK_IN			10
+#define GPI_I2C0_PAD_SDA_IN			11
+#define GPI_I2C1_PAD_SCK_IN			12
+#define GPI_I2C1_PAD_SDA_IN			13
+#define GPI_I2C2_PAD_SCK_IN			14
+#define GPI_I2C2_PAD_SDA_IN			15
+#define GPI_I2C3_PAD_SCK_IN			16
+#define GPI_I2C3_PAD_SDA_IN			17
+#define GPI_I2SRX_BCLK_IN			18
+#define GPI_I2SRX_LRCK_IN			19
+#define GPI_I2SRX_SDIN_BIT0			20
+#define GPI_I2SRX_SDIN_BIT1			21
+#define GPI_I2SRX_SDIN_BIT2			22
+#define GPI_I2STX_BCLK_IN			23
+#define GPI_I2STX_LRCK_IN			24
+#define GPI_SDIO0_PAD_CARD_DETECT_N		25
+#define GPI_SDIO0_PAD_CARD_WRITE_PRT		26
+#define GPI_SDIO0_PAD_CCMD_IN			27
+#define GPI_SDIO0_PAD_CDATA_IN_BIT0		28
+#define GPI_SDIO0_PAD_CDATA_IN_BIT1		29
+#define GPI_SDIO0_PAD_CDATA_IN_BIT2		30
+#define GPI_SDIO0_PAD_CDATA_IN_BIT3		31
+#define GPI_SDIO0_PAD_CDATA_IN_BIT4		32
+#define GPI_SDIO0_PAD_CDATA_IN_BIT5		33
+#define GPI_SDIO0_PAD_CDATA_IN_BIT6		34
+#define GPI_SDIO0_PAD_CDATA_IN_BIT7		35
+#define GPI_SDIO1_PAD_CARD_DETECT_N		36
+#define GPI_SDIO1_PAD_CARD_WRITE_PRT		37
+#define GPI_SDIO1_PAD_CCMD_IN			38
+#define GPI_SDIO1_PAD_CDATA_IN_BIT0		39
+#define GPI_SDIO1_PAD_CDATA_IN_BIT1		40
+#define GPI_SDIO1_PAD_CDATA_IN_BIT2		41
+#define GPI_SDIO1_PAD_CDATA_IN_BIT3		42
+#define GPI_SDIO1_PAD_CDATA_IN_BIT4		43
+#define GPI_SDIO1_PAD_CDATA_IN_BIT5		44
+#define GPI_SDIO1_PAD_CDATA_IN_BIT6		45
+#define GPI_SDIO1_PAD_CDATA_IN_BIT7		46
+#define GPI_SPDIF_RX_SDIN			47
+#define GPI_SPI0_PAD_RXD			48
+#define GPI_SPI0_PAD_SS_IN_N			49
+#define GPI_SPI1_PAD_RXD			50
+#define GPI_SPI1_PAD_SS_IN_N			51
+#define GPI_SPI2_PAD_RXD			52
+#define GPI_SPI2_PAD_SS_IN_N			53
+#define GPI_SPI2AHB_PAD_RXD_BIT0		54
+#define GPI_SPI2AHB_PAD_RXD_BIT1		55
+#define GPI_SPI2AHB_PAD_RXD_BIT2		56
+#define GPI_SPI2AHB_PAD_RXD_BIT3		57
+#define GPI_SPI2AHB_PAD_SS_N			58
+#define GPI_SPI2AHB_SLV_SCLKIN			59
+#define GPI_SPI3_PAD_RXD			60
+#define GPI_SPI3_PAD_SS_IN_N			61
+#define GPI_UART0_PAD_CTSN			62
+#define GPI_UART0_PAD_DCDN			63
+#define GPI_UART0_PAD_DSRN			64
+#define GPI_UART0_PAD_RIN			65
+#define GPI_UART0_PAD_SIN			66
+#define GPI_UART1_PAD_SIN			67
+#define GPI_UART2_PAD_CTS_N			68
+#define GPI_UART2_PAD_DCD_N			69
+#define GPI_UART2_PAD_DSR_N			70
+#define GPI_UART2_PAD_RI_N			71
+#define GPI_UART2_PAD_SIN			72
+#define GPI_UART3_PAD_SIN			73
+#define GPI_USB_OVER_CURRENT			74
+
+#define GPI_NONE				0xff
+
+#endif /* __DT_BINDINGS_PINCTRL_STARFIVE_JH7100_H__ */