Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 468 insertions, 0 deletions

diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
new file mode 100644
index 000000000..e6526b138
--- /dev/null
+++ b/include/dt-bindings/usb/pd.h
@@ -0,0 +1,468 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_POWER_DELIVERY_H
+#define __DT_POWER_DELIVERY_H
+
+/* Power delivery Power Data Object definitions */
+#define PDO_TYPE_FIXED		0
+#define PDO_TYPE_BATT		1
+#define PDO_TYPE_VAR		2
+#define PDO_TYPE_APDO		3
+
+#define PDO_TYPE_SHIFT		30
+#define PDO_TYPE_MASK		0x3
+
+#define PDO_TYPE(t)	((t) << PDO_TYPE_SHIFT)
+
+#define PDO_VOLT_MASK		0x3ff
+#define PDO_CURR_MASK		0x3ff
+#define PDO_PWR_MASK		0x3ff
+
+#define PDO_FIXED_DUAL_ROLE	(1 << 29) /* Power role swap supported */
+#define PDO_FIXED_SUSPEND	(1 << 28) /* USB Suspend supported (Source) */
+#define PDO_FIXED_HIGHER_CAP	(1 << 28) /* Requires more than vSafe5V (Sink) */
+#define PDO_FIXED_EXTPOWER	(1 << 27) /* Externally powered */
+#define PDO_FIXED_USB_COMM	(1 << 26) /* USB communications capable */
+#define PDO_FIXED_DATA_SWAP	(1 << 25) /* Data role swap supported */
+#define PDO_FIXED_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_FIXED_CURR_SHIFT	0	/* 10mA units */
+
+#define PDO_FIXED_VOLT(mv)	((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
+#define PDO_FIXED_CURR(ma)	((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)
+
+#define PDO_FIXED(mv, ma, flags)			\
+	(PDO_TYPE(PDO_TYPE_FIXED) | (flags) |		\
+	 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma))
+
+#define VSAFE5V 5000 /* mv units */
+
+#define PDO_BATT_MAX_VOLT_SHIFT	20	/* 50mV units */
+#define PDO_BATT_MIN_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_BATT_MAX_PWR_SHIFT	0	/* 250mW units */
+
+#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
+#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
+#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)
+
+#define PDO_BATT(min_mv, max_mv, max_mw)			\
+	(PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) |	\
+	 PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw))
+
+#define PDO_VAR_MAX_VOLT_SHIFT	20	/* 50mV units */
+#define PDO_VAR_MIN_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_VAR_MAX_CURR_SHIFT	0	/* 10mA units */
+
+#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
+#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
+#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)
+
+#define PDO_VAR(min_mv, max_mv, max_ma)				\
+	(PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) |	\
+	 PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma))
+
+#define APDO_TYPE_PPS		0
+
+#define PDO_APDO_TYPE_SHIFT	28	/* Only valid value currently is 0x0 - PPS */
+#define PDO_APDO_TYPE_MASK	0x3
+
+#define PDO_APDO_TYPE(t)	((t) << PDO_APDO_TYPE_SHIFT)
+
+#define PDO_PPS_APDO_MAX_VOLT_SHIFT	17	/* 100mV units */
+#define PDO_PPS_APDO_MIN_VOLT_SHIFT	8	/* 100mV units */
+#define PDO_PPS_APDO_MAX_CURR_SHIFT	0	/* 50mA units */
+
+#define PDO_PPS_APDO_VOLT_MASK	0xff
+#define PDO_PPS_APDO_CURR_MASK	0x7f
+
+#define PDO_PPS_APDO_MIN_VOLT(mv)	\
+	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
+#define PDO_PPS_APDO_MAX_VOLT(mv)	\
+	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
+#define PDO_PPS_APDO_MAX_CURR(ma)	\
+	((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT)
+
+#define PDO_PPS_APDO(min_mv, max_mv, max_ma)					\
+	(PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) |		\
+	 PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) |	\
+	 PDO_PPS_APDO_MAX_CURR(max_ma))
+
+ /*
+  * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
+  * Version 1.2"
+  * Initial current capability of the new source when vSafe5V is applied.
+  */
+#define FRS_DEFAULT_POWER      1
+#define FRS_5V_1P5A            2
+#define FRS_5V_3A              3
+
+/*
+ * SVDM Identity Header
+ * --------------------
+ * <31>     :: data capable as a USB host
+ * <30>     :: data capable as a USB device
+ * <29:27>  :: product type (UFP / Cable / VPD)
+ * <26>     :: modal operation supported (1b == yes)
+ * <25:23>  :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0)
+ * <22:21>  :: connector type (SVDM version 2.0+ only; set to zero in version 1.0)
+ * <20:16>  :: Reserved, Shall be set to zero
+ * <15:0>   :: USB-IF assigned VID for this cable vendor
+ */
+
+/* PD Rev2.0 definition */
+#define IDH_PTYPE_UNDEF		0
+
+/* SOP Product Type (UFP) */
+#define IDH_PTYPE_NOT_UFP       0
+#define IDH_PTYPE_HUB           1
+#define IDH_PTYPE_PERIPH        2
+#define IDH_PTYPE_PSD           3
+#define IDH_PTYPE_AMA           5
+
+/* SOP' Product Type (Cable Plug / VPD) */
+#define IDH_PTYPE_NOT_CABLE     0
+#define IDH_PTYPE_PCABLE        3
+#define IDH_PTYPE_ACABLE        4
+#define IDH_PTYPE_VPD           6
+
+/* SOP Product Type (DFP) */
+#define IDH_PTYPE_NOT_DFP       0
+#define IDH_PTYPE_DFP_HUB       1
+#define IDH_PTYPE_DFP_HOST      2
+#define IDH_PTYPE_DFP_PB        3
+
+#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid)                \
+	((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27                \
+	 | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21        \
+	 | ((vid) & 0xffff))
+
+/*
+ * Cert Stat VDO
+ * -------------
+ * <31:0>  : USB-IF assigned XID for this cable
+ */
+#define VDO_CERT(xid)		((xid) & 0xffffffff)
+
+/*
+ * Product VDO
+ * -----------
+ * <31:16> : USB Product ID
+ * <15:0>  : USB bcdDevice
+ */
+#define VDO_PRODUCT(pid, bcd)   (((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
+
+/*
+ * UFP VDO (PD Revision 3.0+ only)
+ * --------
+ * <31:29> :: UFP VDO version
+ * <28>    :: Reserved
+ * <27:24> :: Device capability
+ * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
+ * <21:11> :: Reserved
+ * <10:8>  :: Vconn power (AMA only)
+ * <7>     :: Vconn required (AMA only, 0b == no, 1b == yes)
+ * <6>     :: Vbus required (AMA only, 0b == yes, 1b == no)
+ * <5:3>   :: Alternate modes
+ * <2:0>   :: USB highest speed
+ */
+/* UFP VDO Version */
+#define UFP_VDO_VER1_2		2
+
+/* Device Capability */
+#define DEV_USB2_CAPABLE	(1 << 0)
+#define DEV_USB2_BILLBOARD	(1 << 1)
+#define DEV_USB3_CAPABLE	(1 << 2)
+#define DEV_USB4_CAPABLE	(1 << 3)
+
+/* Connector Type */
+#define UFP_RECEPTACLE		2
+#define UFP_CAPTIVE		3
+
+/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */
+#define AMA_VCONN_PWR_1W	0
+#define AMA_VCONN_PWR_1W5	1
+#define AMA_VCONN_PWR_2W	2
+#define AMA_VCONN_PWR_3W	3
+#define AMA_VCONN_PWR_4W	4
+#define AMA_VCONN_PWR_5W	5
+#define AMA_VCONN_PWR_6W	6
+
+/* Vconn Required (AMA only) */
+#define AMA_VCONN_NOT_REQ	0
+#define AMA_VCONN_REQ		1
+
+/* Vbus Required (AMA only) */
+#define AMA_VBUS_REQ		0
+#define AMA_VBUS_NOT_REQ	1
+
+/* Alternate Modes */
+#define UFP_ALTMODE_NOT_SUPP	0
+#define UFP_ALTMODE_TBT3	(1 << 0)
+#define UFP_ALTMODE_RECFG	(1 << 1)
+#define UFP_ALTMODE_NO_RECFG	(1 << 2)
+
+/* USB Highest Speed */
+#define UFP_USB2_ONLY		0
+#define UFP_USB32_GEN1		1
+#define UFP_USB32_4_GEN2	2
+#define UFP_USB4_GEN3		3
+
+#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd)			\
+	(((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22	\
+	 | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3	\
+	 | ((spd) & 0x7))
+
+/*
+ * DFP VDO (PD Revision 3.0+ only)
+ * --------
+ * <31:29> :: DFP VDO version
+ * <28:27> :: Reserved
+ * <26:24> :: Host capability
+ * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
+ * <21:5>  :: Reserved
+ * <4:0>   :: Port number
+ */
+#define DFP_VDO_VER1_1		1
+#define HOST_USB2_CAPABLE	(1 << 0)
+#define HOST_USB3_CAPABLE	(1 << 1)
+#define HOST_USB4_CAPABLE	(1 << 2)
+#define DFP_RECEPTACLE		2
+#define DFP_CAPTIVE		3
+
+#define VDO_DFP(ver, cap, conn, pnum)						\
+	(((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22	\
+	 | ((pnum) & 0x1f))
+
+/*
+ * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ *
+ * Passive Cable VDO (PD Rev3.0+)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:21> :: VDO version
+ * <20>    :: Reserved, Shall be set to zero
+ * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
+ * <10:9>  :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
+ * <8:7>   :: Reserved, Shall be set to zero
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4:3>   :: Reserved, Shall be set to zero
+ * <2:0>   :: USB highest speed
+ *
+ * Active Cable VDO 1 (PD Rev3.0+)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:21> :: VDO version
+ * <20>    :: Reserved, Shall be set to zero
+ * <19:18> :: Connector type (10b == C, 11b == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
+ * <10:9>  :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
+ * <8>     :: SBU supported (0b == supported, 1b == not supported)
+ * <7>     :: SBU type (0b == passive, 1b == active)
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB highest speed
+ */
+/* Cable VDO Version */
+#define CABLE_VDO_VER1_0	0
+#define CABLE_VDO_VER1_3	3
+
+/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
+#define CABLE_CTYPE		2
+#define CABLE_CAPTIVE		3
+
+/* Cable Latency */
+#define CABLE_LATENCY_1M	1
+#define CABLE_LATENCY_2M	2
+#define CABLE_LATENCY_3M	3
+#define CABLE_LATENCY_4M	4
+#define CABLE_LATENCY_5M	5
+#define CABLE_LATENCY_6M	6
+#define CABLE_LATENCY_7M	7
+#define CABLE_LATENCY_7M_PLUS	8
+
+/* Cable Termination Type */
+#define PCABLE_VCONN_NOT_REQ	0
+#define PCABLE_VCONN_REQ	1
+#define ACABLE_ONE_END		2
+#define ACABLE_BOTH_END		3
+
+/* Maximum Vbus Voltage */
+#define CABLE_MAX_VBUS_20V	0
+#define CABLE_MAX_VBUS_30V	1
+#define CABLE_MAX_VBUS_40V	2
+#define CABLE_MAX_VBUS_50V	3
+
+/* Active Cable SBU Supported/Type */
+#define ACABLE_SBU_SUPP		0
+#define ACABLE_SBU_NOT_SUPP	1
+#define ACABLE_SBU_PASSIVE	0
+#define ACABLE_SBU_ACTIVE	1
+
+/* Vbus Current Handling Capability */
+#define CABLE_CURR_DEF		0
+#define CABLE_CURR_3A		1
+#define CABLE_CURR_5A		2
+
+/* USB SuperSpeed Signaling Support (PD Rev2.0) */
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+
+/* USB Highest Speed */
+#define CABLE_USB2_ONLY		0
+#define CABLE_USB32_GEN1	1
+#define CABLE_USB32_4_GEN2	2
+#define CABLE_USB4_GEN3		3
+
+#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18		\
+	 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10		\
+	 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5		\
+	 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
+#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)			\
+	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
+	 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
+	 | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7))
+#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \
+	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
+	 | ((conn) & 0x3) << 18	| ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
+	 | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5	\
+	 | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7))
+
+/*
+ * Active Cable VDO 2
+ * ---------
+ * <31:24> :: Maximum operating temperature
+ * <23:16> :: Shutdown temperature
+ * <15>    :: Reserved, Shall be set to zero
+ * <14:12> :: U3/CLd power
+ * <11>    :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
+ * <10>    :: Physical connection (0b == copper, 1b == optical)
+ * <9>     :: Active element (0b == redriver, 1b == retimer)
+ * <8>     :: USB4 supported (0b == yes, 1b == no)
+ * <7:6>   :: USB2 hub hops consumed
+ * <5>     :: USB2 supported (0b == yes, 1b == no)
+ * <4>     :: USB3.2 supported (0b == yes, 1b == no)
+ * <3>     :: USB lanes supported (0b == one lane, 1b == two lanes)
+ * <2>     :: Optically isolated active cable (0b == no, 1b == yes)
+ * <1>     :: Reserved, Shall be set to zero
+ * <0>     :: USB gen (0b == gen1, 1b == gen2+)
+ */
+/* U3/CLd Power*/
+#define ACAB2_U3_CLD_10MW_PLUS	0
+#define ACAB2_U3_CLD_10MW	1
+#define ACAB2_U3_CLD_5MW	2
+#define ACAB2_U3_CLD_1MW	3
+#define ACAB2_U3_CLD_500UW	4
+#define ACAB2_U3_CLD_200UW	5
+#define ACAB2_U3_CLD_50UW	6
+
+/* Other Active Cable VDO 2 Fields */
+#define ACAB2_U3U0_DIRECT	0
+#define ACAB2_U3U0_U3S		1
+#define ACAB2_PHY_COPPER	0
+#define ACAB2_PHY_OPTICAL	1
+#define ACAB2_REDRIVER		0
+#define ACAB2_RETIMER		1
+#define ACAB2_USB4_SUPP		0
+#define ACAB2_USB4_NOT_SUPP	1
+#define ACAB2_USB2_SUPP		0
+#define ACAB2_USB2_NOT_SUPP	1
+#define ACAB2_USB32_SUPP	0
+#define ACAB2_USB32_NOT_SUPP	1
+#define ACAB2_LANES_ONE		0
+#define ACAB2_LANES_TWO		1
+#define ACAB2_OPT_ISO_NO	0
+#define ACAB2_OPT_ISO_YES	1
+#define ACAB2_GEN_1		0
+#define ACAB2_GEN_2_PLUS	1
+
+#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen)	\
+	(((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12	\
+	 | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8			\
+	 | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3		\
+	 | (iso) << 2 | (gen))
+
+/*
+ * AMA VDO (PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
+/*
+ * VPD VDO
+ * ---------
+ * <31:28> :: HW version
+ * <27:24> :: FW version
+ * <23:21> :: VDO version
+ * <20:17> :: Reserved, Shall be set to zero
+ * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
+ * <14>    :: Charge through current support (0b == 3A, 1b == 5A)
+ * <13>    :: Reserved, Shall be set to zero
+ * <12:7>  :: Vbus impedance
+ * <6:1>   :: Ground impedance
+ * <0>     :: Charge through support (0b == no, 1b == yes)
+ */
+#define VPD_VDO_VER1_0		0
+#define VPD_MAX_VBUS_20V	0
+#define VPD_MAX_VBUS_30V	1
+#define VPD_MAX_VBUS_40V	2
+#define VPD_MAX_VBUS_50V	3
+#define VPDCT_CURR_3A		0
+#define VPDCT_CURR_5A		1
+#define VPDCT_NOT_SUPP		0
+#define VPDCT_SUPP		1
+
+#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct)			\
+	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21	\
+	 | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7	\
+	 | ((gi) & 0x3f) << 1 | (ct))
+
+#endif /* __DT_POWER_DELIVERY_H */