Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1161 insertions, 0 deletions

diff --git a/include/linux/clk.h b/include/linux/clk.h
new file mode 100644
index 000000000..1ef013324
--- /dev/null
+++ b/include/linux/clk.h
@@ -0,0 +1,1161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/include/linux/clk.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ */
+#ifndef __LINUX_CLK_H
+#define __LINUX_CLK_H
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+struct device;
+struct clk;
+struct device_node;
+struct of_phandle_args;
+
+/**
+ * DOC: clk notifier callback types
+ *
+ * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
+ *     to indicate that the rate change will proceed.  Drivers must
+ *     immediately terminate any operations that will be affected by the
+ *     rate change.  Callbacks may either return NOTIFY_DONE, NOTIFY_OK,
+ *     NOTIFY_STOP or NOTIFY_BAD.
+ *
+ * ABORT_RATE_CHANGE: called if the rate change failed for some reason
+ *     after PRE_RATE_CHANGE.  In this case, all registered notifiers on
+ *     the clk will be called with ABORT_RATE_CHANGE. Callbacks must
+ *     always return NOTIFY_DONE or NOTIFY_OK.
+ *
+ * POST_RATE_CHANGE - called after the clk rate change has successfully
+ *     completed.  Callbacks must always return NOTIFY_DONE or NOTIFY_OK.
+ *
+ */
+#define PRE_RATE_CHANGE			BIT(0)
+#define POST_RATE_CHANGE		BIT(1)
+#define ABORT_RATE_CHANGE		BIT(2)
+
+/**
+ * struct clk_notifier - associate a clk with a notifier
+ * @clk: struct clk * to associate the notifier with
+ * @notifier_head: a blocking_notifier_head for this clk
+ * @node: linked list pointers
+ *
+ * A list of struct clk_notifier is maintained by the notifier code.
+ * An entry is created whenever code registers the first notifier on a
+ * particular @clk.  Future notifiers on that @clk are added to the
+ * @notifier_head.
+ */
+struct clk_notifier {
+	struct clk			*clk;
+	struct srcu_notifier_head	notifier_head;
+	struct list_head		node;
+};
+
+/**
+ * struct clk_notifier_data - rate data to pass to the notifier callback
+ * @clk: struct clk * being changed
+ * @old_rate: previous rate of this clk
+ * @new_rate: new rate of this clk
+ *
+ * For a pre-notifier, old_rate is the clk's rate before this rate
+ * change, and new_rate is what the rate will be in the future.  For a
+ * post-notifier, old_rate and new_rate are both set to the clk's
+ * current rate (this was done to optimize the implementation).
+ */
+struct clk_notifier_data {
+	struct clk		*clk;
+	unsigned long		old_rate;
+	unsigned long		new_rate;
+};
+
+/**
+ * struct clk_bulk_data - Data used for bulk clk operations.
+ *
+ * @id: clock consumer ID
+ * @clk: struct clk * to store the associated clock
+ *
+ * The CLK APIs provide a series of clk_bulk_() API calls as
+ * a convenience to consumers which require multiple clks.  This
+ * structure is used to manage data for these calls.
+ */
+struct clk_bulk_data {
+	const char		*id;
+	struct clk		*clk;
+};
+
+#ifdef CONFIG_COMMON_CLK
+
+/**
+ * clk_notifier_register - register a clock rate-change notifier callback
+ * @clk: clock whose rate we are interested in
+ * @nb: notifier block with callback function pointer
+ *
+ * ProTip: debugging across notifier chains can be frustrating. Make sure that
+ * your notifier callback function prints a nice big warning in case of
+ * failure.
+ */
+int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
+
+/**
+ * clk_notifier_unregister - unregister a clock rate-change notifier callback
+ * @clk: clock whose rate we are no longer interested in
+ * @nb: notifier block which will be unregistered
+ */
+int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
+
+/**
+ * devm_clk_notifier_register - register a managed rate-change notifier callback
+ * @dev: device for clock "consumer"
+ * @clk: clock whose rate we are interested in
+ * @nb: notifier block with callback function pointer
+ *
+ * Returns 0 on success, -EERROR otherwise
+ */
+int devm_clk_notifier_register(struct device *dev, struct clk *clk,
+			       struct notifier_block *nb);
+
+/**
+ * clk_get_accuracy - obtain the clock accuracy in ppb (parts per billion)
+ *		      for a clock source.
+ * @clk: clock source
+ *
+ * This gets the clock source accuracy expressed in ppb.
+ * A perfect clock returns 0.
+ */
+long clk_get_accuracy(struct clk *clk);
+
+/**
+ * clk_set_phase - adjust the phase shift of a clock signal
+ * @clk: clock signal source
+ * @degrees: number of degrees the signal is shifted
+ *
+ * Shifts the phase of a clock signal by the specified degrees. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_phase(struct clk *clk, int degrees);
+
+/**
+ * clk_get_phase - return the phase shift of a clock signal
+ * @clk: clock signal source
+ *
+ * Returns the phase shift of a clock node in degrees, otherwise returns
+ * -EERROR.
+ */
+int clk_get_phase(struct clk *clk);
+
+/**
+ * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @num: numerator of the duty cycle ratio to be applied
+ * @den: denominator of the duty cycle ratio to be applied
+ *
+ * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den);
+
+/**
+ * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @scale: scaling factor to be applied to represent the ratio as an integer
+ *
+ * Returns the duty cycle ratio multiplied by the scale provided, otherwise
+ * returns -EERROR.
+ */
+int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale);
+
+/**
+ * clk_is_match - check if two clk's point to the same hardware clock
+ * @p: clk compared against q
+ * @q: clk compared against p
+ *
+ * Returns true if the two struct clk pointers both point to the same hardware
+ * clock node. Put differently, returns true if @p and @q
+ * share the same &struct clk_core object.
+ *
+ * Returns false otherwise. Note that two NULL clks are treated as matching.
+ */
+bool clk_is_match(const struct clk *p, const struct clk *q);
+
+#else
+
+static inline int clk_notifier_register(struct clk *clk,
+					struct notifier_block *nb)
+{
+	return -ENOTSUPP;
+}
+
+static inline int clk_notifier_unregister(struct clk *clk,
+					  struct notifier_block *nb)
+{
+	return -ENOTSUPP;
+}
+
+static inline int devm_clk_notifier_register(struct device *dev,
+					     struct clk *clk,
+					     struct notifier_block *nb)
+{
+	return -ENOTSUPP;
+}
+
+static inline long clk_get_accuracy(struct clk *clk)
+{
+	return -ENOTSUPP;
+}
+
+static inline long clk_set_phase(struct clk *clk, int phase)
+{
+	return -ENOTSUPP;
+}
+
+static inline long clk_get_phase(struct clk *clk)
+{
+	return -ENOTSUPP;
+}
+
+static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num,
+				     unsigned int den)
+{
+	return -ENOTSUPP;
+}
+
+static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk,
+						     unsigned int scale)
+{
+	return 0;
+}
+
+static inline bool clk_is_match(const struct clk *p, const struct clk *q)
+{
+	return p == q;
+}
+
+#endif
+
+#ifdef CONFIG_HAVE_CLK_PREPARE
+/**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+int clk_prepare(struct clk *clk);
+int __must_check clk_bulk_prepare(int num_clks,
+				  const struct clk_bulk_data *clks);
+
+/**
+ * clk_is_enabled_when_prepared - indicate if preparing a clock also enables it.
+ * @clk: clock source
+ *
+ * Returns true if clk_prepare() implicitly enables the clock, effectively
+ * making clk_enable()/clk_disable() no-ops, false otherwise.
+ *
+ * This is of interest mainly to the power management code where actually
+ * disabling the clock also requires unpreparing it to have any material
+ * effect.
+ *
+ * Regardless of the value returned here, the caller must always invoke
+ * clk_enable() or clk_prepare_enable()  and counterparts for usage counts
+ * to be right.
+ */
+bool clk_is_enabled_when_prepared(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+	might_sleep();
+	return 0;
+}
+
+static inline int __must_check
+clk_bulk_prepare(int num_clks, const struct clk_bulk_data *clks)
+{
+	might_sleep();
+	return 0;
+}
+
+static inline bool clk_is_enabled_when_prepared(struct clk *clk)
+{
+	return false;
+}
+#endif
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock.  The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+	might_sleep();
+}
+static inline void clk_bulk_unprepare(int num_clks,
+				      const struct clk_bulk_data *clks)
+{
+	might_sleep();
+}
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+/**
+ * clk_get - lookup and obtain a reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_get should not be called from within interrupt context.
+ */
+struct clk *clk_get(struct device *dev, const char *id);
+
+/**
+ * clk_bulk_get - lookup and obtain a number of references to clock producer.
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * This helper function allows drivers to get several clk consumers in one
+ * operation. If any of the clk cannot be acquired then any clks
+ * that were obtained will be freed before returning to the caller.
+ *
+ * Returns 0 if all clocks specified in clk_bulk_data table are obtained
+ * successfully, or valid IS_ERR() condition containing errno.
+ * The implementation uses @dev and @clk_bulk_data.id to determine the
+ * clock consumer, and thereby the clock producer.
+ * The clock returned is stored in each @clk_bulk_data.clk field.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check clk_bulk_get(struct device *dev, int num_clks,
+			      struct clk_bulk_data *clks);
+/**
+ * clk_bulk_get_all - lookup and obtain all available references to clock
+ *		      producer.
+ * @dev: device for clock "consumer"
+ * @clks: pointer to the clk_bulk_data table of consumer
+ *
+ * This helper function allows drivers to get all clk consumers in one
+ * operation. If any of the clk cannot be acquired then any clks
+ * that were obtained will be freed before returning to the caller.
+ *
+ * Returns a positive value for the number of clocks obtained while the
+ * clock references are stored in the clk_bulk_data table in @clks field.
+ * Returns 0 if there're none and a negative value if something failed.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check clk_bulk_get_all(struct device *dev,
+				  struct clk_bulk_data **clks);
+
+/**
+ * clk_bulk_get_optional - lookup and obtain a number of references to clock producer
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Behaves the same as clk_bulk_get() except where there is no clock producer.
+ * In this case, instead of returning -ENOENT, the function returns 0 and
+ * NULL for a clk for which a clock producer could not be determined.
+ */
+int __must_check clk_bulk_get_optional(struct device *dev, int num_clks,
+				       struct clk_bulk_data *clks);
+/**
+ * devm_clk_bulk_get - managed get multiple clk consumers
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several clk
+ * consumers in one operation with management, the clks will
+ * automatically be freed when the device is unbound.
+ */
+int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
+				   struct clk_bulk_data *clks);
+/**
+ * devm_clk_bulk_get_optional - managed get multiple optional consumer clocks
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: pointer to the clk_bulk_data table of consumer
+ *
+ * Behaves the same as devm_clk_bulk_get() except where there is no clock
+ * producer.  In this case, instead of returning -ENOENT, the function returns
+ * NULL for given clk. It is assumed all clocks in clk_bulk_data are optional.
+ *
+ * Returns 0 if all clocks specified in clk_bulk_data table are obtained
+ * successfully or for any clk there was no clk provider available, otherwise
+ * returns valid IS_ERR() condition containing errno.
+ * The implementation uses @dev and @clk_bulk_data.id to determine the
+ * clock consumer, and thereby the clock producer.
+ * The clock returned is stored in each @clk_bulk_data.clk field.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check devm_clk_bulk_get_optional(struct device *dev, int num_clks,
+					    struct clk_bulk_data *clks);
+/**
+ * devm_clk_bulk_get_all - managed get multiple clk consumers
+ * @dev: device for clock "consumer"
+ * @clks: pointer to the clk_bulk_data table of consumer
+ *
+ * Returns a positive value for the number of clocks obtained while the
+ * clock references are stored in the clk_bulk_data table in @clks field.
+ * Returns 0 if there're none and a negative value if something failed.
+ *
+ * This helper function allows drivers to get several clk
+ * consumers in one operation with management, the clks will
+ * automatically be freed when the device is unbound.
+ */
+
+int __must_check devm_clk_bulk_get_all(struct device *dev,
+				       struct clk_bulk_data **clks);
+
+/**
+ * devm_clk_get - lookup and obtain a managed reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is neither prepared nor
+ * enabled.
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
+ */
+struct clk *devm_clk_get(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_prepared - devm_clk_get() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared. Drivers must however assume
+ * that the clock is not enabled.
+ *
+ * The clock will automatically be unprepared and freed when the device
+ * is unbound from the bus.
+ */
+struct clk *devm_clk_get_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_enabled - devm_clk_get() + clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared and enabled.
+ *
+ * The clock will automatically be disabled, unprepared and freed
+ * when the device is unbound from the bus.
+ */
+struct clk *devm_clk_get_enabled(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_optional - lookup and obtain a managed reference to an optional
+ *			   clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get().
+ *
+ * Drivers must assume that the clock source is neither prepared nor
+ * enabled.
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
+ */
+struct clk *devm_clk_get_optional(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_optional_prepared - devm_clk_get_optional() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get_prepared().
+ *
+ * The returned clk (if valid) is prepared. Drivers must however
+ * assume that the clock is not enabled.
+ *
+ * The clock will automatically be unprepared and freed when the
+ * device is unbound from the bus.
+ */
+struct clk *devm_clk_get_optional_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_optional_enabled - devm_clk_get_optional() +
+ *                                 clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get_enabled().
+ *
+ * The returned clk (if valid) is prepared and enabled.
+ *
+ * The clock will automatically be disabled, unprepared and freed
+ * when the device is unbound from the bus.
+ */
+struct clk *devm_clk_get_optional_enabled(struct device *dev, const char *id);
+
+/**
+ * devm_get_clk_from_child - lookup and obtain a managed reference to a
+ *			     clock producer from child node.
+ * @dev: device for clock "consumer"
+ * @np: pointer to clock consumer node
+ * @con_id: clock consumer ID
+ *
+ * This function parses the clocks, and uses them to look up the
+ * struct clk from the registered list of clock providers by using
+ * @np and @con_id
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
+ */
+struct clk *devm_get_clk_from_child(struct device *dev,
+				    struct device_node *np, const char *con_id);
+/**
+ * clk_rate_exclusive_get - get exclusivity over the rate control of a
+ *                          producer
+ * @clk: clock source
+ *
+ * This function allows drivers to get exclusive control over the rate of a
+ * provider. It prevents any other consumer to execute, even indirectly,
+ * opereation which could alter the rate of the provider or cause glitches
+ *
+ * If exlusivity is claimed more than once on clock, even by the same driver,
+ * the rate effectively gets locked as exclusivity can't be preempted.
+ *
+ * Must not be called from within atomic context.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_rate_exclusive_get(struct clk *clk);
+
+/**
+ * clk_rate_exclusive_put - release exclusivity over the rate control of a
+ *                          producer
+ * @clk: clock source
+ *
+ * This function allows drivers to release the exclusivity it previously got
+ * from clk_rate_exclusive_get()
+ *
+ * The caller must balance the number of clk_rate_exclusive_get() and
+ * clk_rate_exclusive_put() calls.
+ *
+ * Must not be called from within atomic context.
+ */
+void clk_rate_exclusive_put(struct clk *clk);
+
+/**
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * May be called from atomic contexts.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk);
+
+/**
+ * clk_bulk_enable - inform the system when the set of clks should be running.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * May be called from atomic contexts.
+ *
+ * Returns success (0) or negative errno.
+ */
+int __must_check clk_bulk_enable(int num_clks,
+				 const struct clk_bulk_data *clks);
+
+/**
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * May be called from atomic contexts.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk);
+
+/**
+ * clk_bulk_disable - inform the system when the set of clks is no
+ *		      longer required.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Inform the system that a set of clks is no longer required by
+ * a driver and may be shut down.
+ *
+ * May be called from atomic contexts.
+ *
+ * Implementation detail: if the set of clks is shared between
+ * multiple drivers, clk_bulk_enable() calls must be balanced by the
+ * same number of clk_bulk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks);
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *		  This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk);
+
+/**
+ * clk_put	- "free" the clock source
+ * @clk: clock source
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
+ *
+ * clk_put should not be called from within interrupt context.
+ */
+void clk_put(struct clk *clk);
+
+/**
+ * clk_bulk_put	- "free" the clock source
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Note: drivers must ensure that all clk_bulk_enable calls made on this
+ * clock source are balanced by clk_bulk_disable calls prior to calling
+ * this function.
+ *
+ * clk_bulk_put should not be called from within interrupt context.
+ */
+void clk_bulk_put(int num_clks, struct clk_bulk_data *clks);
+
+/**
+ * clk_bulk_put_all - "free" all the clock source
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Note: drivers must ensure that all clk_bulk_enable calls made on this
+ * clock source are balanced by clk_bulk_disable calls prior to calling
+ * this function.
+ *
+ * clk_bulk_put_all should not be called from within interrupt context.
+ */
+void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks);
+
+/**
+ * devm_clk_put	- "free" a managed clock source
+ * @dev: device used to acquire the clock
+ * @clk: clock source acquired with devm_clk_get()
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
+ *
+ * clk_put should not be called from within interrupt context.
+ */
+void devm_clk_put(struct device *dev, struct clk *clk);
+
+/*
+ * The remaining APIs are optional for machine class support.
+ */
+
+
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * This answers the question "if I were to pass @rate to clk_set_rate(),
+ * what clock rate would I end up with?" without changing the hardware
+ * in any way.  In other words:
+ *
+ *   rate = clk_round_rate(clk, r);
+ *
+ * and:
+ *
+ *   clk_set_rate(clk, r);
+ *   rate = clk_get_rate(clk);
+ *
+ * are equivalent except the former does not modify the clock hardware
+ * in any way.
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate);
+
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Updating the rate starts at the top-most affected clock and then
+ * walks the tree down to the bottom-most clock that needs updating.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate);
+
+/**
+ * clk_set_rate_exclusive- set the clock rate and claim exclusivity over
+ *                         clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * This helper function allows drivers to atomically set the rate of a producer
+ * and claim exclusivity over the rate control of the producer.
+ *
+ * It is essentially a combination of clk_set_rate() and
+ * clk_rate_exclusite_get(). Caller must balance this call with a call to
+ * clk_rate_exclusive_put()
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_exclusive(struct clk *clk, unsigned long rate);
+
+/**
+ * clk_has_parent - check if a clock is a possible parent for another
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * This function can be used in drivers that need to check that a clock can be
+ * the parent of another without actually changing the parent.
+ *
+ * Returns true if @parent is a possible parent for @clk, false otherwise.
+ */
+bool clk_has_parent(const struct clk *clk, const struct clk *parent);
+
+/**
+ * clk_set_rate_range - set a rate range for a clock source
+ * @clk: clock source
+ * @min: desired minimum clock rate in Hz, inclusive
+ * @max: desired maximum clock rate in Hz, inclusive
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max);
+
+/**
+ * clk_set_min_rate - set a minimum clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired minimum clock rate in Hz, inclusive
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_min_rate(struct clk *clk, unsigned long rate);
+
+/**
+ * clk_set_max_rate - set a maximum clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired maximum clock rate in Hz, inclusive
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_max_rate(struct clk *clk, unsigned long rate);
+
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent);
+
+/**
+ * clk_get_parent - get the parent clock source for this clock
+ * @clk: clock source
+ *
+ * Returns struct clk corresponding to parent clock source, or
+ * valid IS_ERR() condition containing errno.
+ */
+struct clk *clk_get_parent(struct clk *clk);
+
+/**
+ * clk_get_sys - get a clock based upon the device name
+ * @dev_id: device name
+ * @con_id: connection ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev_id and @con_id to determine the clock consumer, and
+ * thereby the clock producer. In contrast to clk_get() this function
+ * takes the device name instead of the device itself for identification.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_get_sys should not be called from within interrupt context.
+ */
+struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+
+/**
+ * clk_save_context - save clock context for poweroff
+ *
+ * Saves the context of the clock register for powerstates in which the
+ * contents of the registers will be lost. Occurs deep within the suspend
+ * code so locking is not necessary.
+ */
+int clk_save_context(void);
+
+/**
+ * clk_restore_context - restore clock context after poweroff
+ *
+ * This occurs with all clocks enabled. Occurs deep within the resume code
+ * so locking is not necessary.
+ */
+void clk_restore_context(void);
+
+#else /* !CONFIG_HAVE_CLK */
+
+static inline struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline int __must_check clk_bulk_get(struct device *dev, int num_clks,
+					    struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
+static inline int __must_check clk_bulk_get_optional(struct device *dev,
+				int num_clks, struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
+static inline int __must_check clk_bulk_get_all(struct device *dev,
+					 struct clk_bulk_data **clks)
+{
+	return 0;
+}
+
+static inline struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_prepared(struct device *dev,
+						const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_enabled(struct device *dev,
+					       const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_optional(struct device *dev,
+						const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_optional_prepared(struct device *dev,
+							 const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_optional_enabled(struct device *dev,
+							const char *id)
+{
+	return NULL;
+}
+
+static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
+						 struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
+static inline int __must_check devm_clk_bulk_get_optional(struct device *dev,
+				int num_clks, struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
+static inline int __must_check devm_clk_bulk_get_all(struct device *dev,
+						     struct clk_bulk_data **clks)
+{
+
+	return 0;
+}
+
+static inline struct clk *devm_get_clk_from_child(struct device *dev,
+				struct device_node *np, const char *con_id)
+{
+	return NULL;
+}
+
+static inline void clk_put(struct clk *clk) {}
+
+static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {}
+
+static inline void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks) {}
+
+static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
+
+
+static inline int clk_rate_exclusive_get(struct clk *clk)
+{
+	return 0;
+}
+
+static inline void clk_rate_exclusive_put(struct clk *clk) {}
+
+static inline int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static inline int __must_check clk_bulk_enable(int num_clks,
+					       const struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
+static inline void clk_disable(struct clk *clk) {}
+
+
+static inline void clk_bulk_disable(int num_clks,
+				    const struct clk_bulk_data *clks) {}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+	return 0;
+}
+
+static inline int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int clk_set_rate_exclusive(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline bool clk_has_parent(struct clk *clk, struct clk *parent)
+{
+	return true;
+}
+
+static inline int clk_set_rate_range(struct clk *clk, unsigned long min,
+				     unsigned long max)
+{
+	return 0;
+}
+
+static inline int clk_set_min_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int clk_set_max_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+
+static inline struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+
+static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+	return NULL;
+}
+
+static inline int clk_save_context(void)
+{
+	return 0;
+}
+
+static inline void clk_restore_context(void) {}
+
+#endif
+
+/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
+static inline int __must_check
+clk_bulk_prepare_enable(int num_clks, const struct clk_bulk_data *clks)
+{
+	int ret;
+
+	ret = clk_bulk_prepare(num_clks, clks);
+	if (ret)
+		return ret;
+	ret = clk_bulk_enable(num_clks, clks);
+	if (ret)
+		clk_bulk_unprepare(num_clks, clks);
+
+	return ret;
+}
+
+static inline void clk_bulk_disable_unprepare(int num_clks,
+					      const struct clk_bulk_data *clks)
+{
+	clk_bulk_disable(num_clks, clks);
+	clk_bulk_unprepare(num_clks, clks);
+}
+
+/**
+ * clk_drop_range - Reset any range set on that clock
+ * @clk: clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+static inline int clk_drop_range(struct clk *clk)
+{
+	return clk_set_rate_range(clk, 0, ULONG_MAX);
+}
+
+/**
+ * clk_get_optional - lookup and obtain a reference to an optional clock
+ *		      producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Behaves the same as clk_get() except where there is no clock producer. In
+ * this case, instead of returning -ENOENT, the function returns NULL.
+ */
+static inline struct clk *clk_get_optional(struct device *dev, const char *id)
+{
+	struct clk *clk = clk_get(dev, id);
+
+	if (clk == ERR_PTR(-ENOENT))
+		return NULL;
+
+	return clk;
+}
+
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+struct clk *of_clk_get(struct device_node *np, int index);
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec);
+#else
+static inline struct clk *of_clk_get(struct device_node *np, int index)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline struct clk *of_clk_get_by_name(struct device_node *np,
+					     const char *name)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+#endif