Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 345 insertions, 0 deletions

diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
new file mode 100644
index 000000000..e6826e34e
--- /dev/null
+++ b/include/linux/mfd/tps65219.h
@@ -0,0 +1,345 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Functions to access TPS65219 Power Management IC.
+ *
+ * Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
+ */
+
+#ifndef MFD_TPS65219_H
+#define MFD_TPS65219_H
+
+#include <linux/bitops.h>
+#include <linux/notifier.h>
+#include <linux/regulator/driver.h>
+
+struct regmap;
+struct regmap_irq_chip_data;
+
+#define TPS65219_1V35					1350000
+#define TPS65219_1V8					1800000
+
+/* TPS chip id list */
+#define TPS65219					0xF0
+
+/* I2C ID for TPS65219 part */
+#define TPS65219_I2C_ID					0x24
+
+/* All register addresses */
+#define TPS65219_REG_TI_DEV_ID				0x00
+#define TPS65219_REG_NVM_ID				0x01
+#define TPS65219_REG_ENABLE_CTRL			0x02
+#define TPS65219_REG_BUCKS_CONFIG			0x03
+#define TPS65219_REG_LDO4_VOUT				0x04
+#define TPS65219_REG_LDO3_VOUT				0x05
+#define TPS65219_REG_LDO2_VOUT				0x06
+#define TPS65219_REG_LDO1_VOUT				0x07
+#define TPS65219_REG_BUCK3_VOUT				0x8
+#define TPS65219_REG_BUCK2_VOUT				0x9
+#define TPS65219_REG_BUCK1_VOUT				0xA
+#define TPS65219_REG_LDO4_SEQUENCE_SLOT			0xB
+#define TPS65219_REG_LDO3_SEQUENCE_SLOT			0xC
+#define TPS65219_REG_LDO2_SEQUENCE_SLOT			0xD
+#define TPS65219_REG_LDO1_SEQUENCE_SLOT			0xE
+#define TPS65219_REG_BUCK3_SEQUENCE_SLOT		0xF
+#define TPS65219_REG_BUCK2_SEQUENCE_SLOT		0x10
+#define TPS65219_REG_BUCK1_SEQUENCE_SLOT		0x11
+#define TPS65219_REG_nRST_SEQUENCE_SLOT			0x12
+#define TPS65219_REG_GPIO_SEQUENCE_SLOT			0x13
+#define TPS65219_REG_GPO2_SEQUENCE_SLOT			0x14
+#define TPS65219_REG_GPO1_SEQUENCE_SLOT			0x15
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_1		0x16
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_2		0x17
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_3		0x18
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_4		0x19
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_1		0x1A
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_2		0x1B
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_3		0x1C
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_4		0x1D
+#define TPS65219_REG_GENERAL_CONFIG			0x1E
+#define TPS65219_REG_MFP_1_CONFIG			0x1F
+#define TPS65219_REG_MFP_2_CONFIG			0x20
+#define TPS65219_REG_STBY_1_CONFIG			0x21
+#define TPS65219_REG_STBY_2_CONFIG			0x22
+#define TPS65219_REG_OC_DEGL_CONFIG			0x23
+/* 'sub irq' MASK registers */
+#define TPS65219_REG_INT_MASK_UV			0x24
+#define TPS65219_REG_MASK_CONFIG			0x25
+
+#define TPS65219_REG_I2C_ADDRESS_REG			0x26
+#define TPS65219_REG_USER_GENERAL_NVM_STORAGE		0x27
+#define TPS65219_REG_MANUFACTURING_VER			0x28
+#define TPS65219_REG_MFP_CTRL				0x29
+#define TPS65219_REG_DISCHARGE_CONFIG			0x2A
+/* main irq registers */
+#define TPS65219_REG_INT_SOURCE				0x2B
+/* 'sub irq' registers */
+#define TPS65219_REG_INT_LDO_3_4			0x2C
+#define TPS65219_REG_INT_LDO_1_2			0x2D
+#define TPS65219_REG_INT_BUCK_3				0x2E
+#define TPS65219_REG_INT_BUCK_1_2			0x2F
+#define TPS65219_REG_INT_SYSTEM				0x30
+#define TPS65219_REG_INT_RV				0x31
+#define TPS65219_REG_INT_TIMEOUT_RV_SD			0x32
+#define TPS65219_REG_INT_PB				0x33
+
+#define TPS65219_REG_INT_LDO_3_4_POS			0
+#define TPS65219_REG_INT_LDO_1_2_POS			1
+#define TPS65219_REG_INT_BUCK_3_POS			2
+#define TPS65219_REG_INT_BUCK_1_2_POS			3
+#define TPS65219_REG_INT_SYS_POS			4
+#define TPS65219_REG_INT_RV_POS				5
+#define TPS65219_REG_INT_TO_RV_POS			6
+#define TPS65219_REG_INT_PB_POS				7
+
+#define TPS65219_REG_USER_NVM_CMD			0x34
+#define TPS65219_REG_POWER_UP_STATUS			0x35
+#define TPS65219_REG_SPARE_2				0x36
+#define TPS65219_REG_SPARE_3				0x37
+#define TPS65219_REG_FACTORY_CONFIG_2			0x41
+
+/* Register field definitions */
+#define TPS65219_DEVID_REV_MASK				GENMASK(7, 0)
+#define TPS65219_BUCKS_LDOS_VOUT_VSET_MASK		GENMASK(5, 0)
+#define TPS65219_BUCKS_UV_THR_SEL_MASK			BIT(6)
+#define TPS65219_BUCKS_BW_SEL_MASK			BIT(7)
+#define LDO_BYP_SHIFT					6
+#define TPS65219_LDOS_BYP_CONFIG_MASK			BIT(LDO_BYP_SHIFT)
+#define TPS65219_LDOS_LSW_CONFIG_MASK			BIT(7)
+/* Regulators enable control */
+#define TPS65219_ENABLE_BUCK1_EN_MASK			BIT(0)
+#define TPS65219_ENABLE_BUCK2_EN_MASK			BIT(1)
+#define TPS65219_ENABLE_BUCK3_EN_MASK			BIT(2)
+#define TPS65219_ENABLE_LDO1_EN_MASK			BIT(3)
+#define TPS65219_ENABLE_LDO2_EN_MASK			BIT(4)
+#define TPS65219_ENABLE_LDO3_EN_MASK			BIT(5)
+#define TPS65219_ENABLE_LDO4_EN_MASK			BIT(6)
+/* power ON-OFF sequence slot */
+#define TPS65219_BUCKS_LDOS_SEQUENCE_OFF_SLOT_MASK	GENMASK(3, 0)
+#define TPS65219_BUCKS_LDOS_SEQUENCE_ON_SLOT_MASK	GENMASK(7, 4)
+/* TODO: Not needed, same mapping as TPS65219_ENABLE_REGNAME_EN, factorize */
+#define TPS65219_STBY1_BUCK1_STBY_EN_MASK		BIT(0)
+#define TPS65219_STBY1_BUCK2_STBY_EN_MASK		BIT(1)
+#define TPS65219_STBY1_BUCK3_STBY_EN_MASK		BIT(2)
+#define TPS65219_STBY1_LDO1_STBY_EN_MASK		BIT(3)
+#define TPS65219_STBY1_LDO2_STBY_EN_MASK		BIT(4)
+#define TPS65219_STBY1_LDO3_STBY_EN_MASK		BIT(5)
+#define TPS65219_STBY1_LDO4_STBY_EN_MASK		BIT(6)
+/* STBY_2 config */
+#define TPS65219_STBY2_GPO1_STBY_EN_MASK		BIT(0)
+#define TPS65219_STBY2_GPO2_STBY_EN_MASK		BIT(1)
+#define TPS65219_STBY2_GPIO_STBY_EN_MASK		BIT(2)
+/* MFP Control */
+#define TPS65219_MFP_I2C_OFF_REQ_MASK			BIT(0)
+#define TPS65219_MFP_STBY_I2C_CTRL_MASK			BIT(1)
+#define TPS65219_MFP_COLD_RESET_I2C_CTRL_MASK		BIT(2)
+#define TPS65219_MFP_WARM_RESET_I2C_CTRL_MASK		BIT(3)
+#define TPS65219_MFP_GPIO_STATUS_MASK			BIT(4)
+/* MFP_1 Config */
+#define TPS65219_MFP_1_VSEL_DDR_SEL_MASK		BIT(0)
+#define TPS65219_MFP_1_VSEL_SD_POL_MASK			BIT(1)
+#define TPS65219_MFP_1_VSEL_RAIL_MASK			BIT(2)
+/* MFP_2 Config */
+#define TPS65219_MFP_2_MODE_STBY_MASK			GENMASK(1, 0)
+#define TPS65219_MFP_2_MODE_RESET_MASK			BIT(2)
+#define TPS65219_MFP_2_EN_PB_VSENSE_DEGL_MASK		BIT(3)
+#define TPS65219_MFP_2_EN_PB_VSENSE_MASK		GENMASK(5, 4)
+#define TPS65219_MFP_2_WARM_COLD_RESET_MASK		BIT(6)
+#define TPS65219_MFP_2_PU_ON_FSD_MASK			BIT(7)
+#define TPS65219_MFP_2_EN				0
+#define TPS65219_MFP_2_PB				BIT(4)
+#define TPS65219_MFP_2_VSENSE				BIT(5)
+/* MASK_UV Config */
+#define TPS65219_REG_MASK_UV_LDO1_UV_MASK		BIT(0)
+#define TPS65219_REG_MASK_UV_LDO2_UV_MASK		BIT(1)
+#define TPS65219_REG_MASK_UV_LDO3_UV_MASK		BIT(2)
+#define TPS65219_REG_MASK_UV_LDO4_UV_MASK		BIT(3)
+#define TPS65219_REG_MASK_UV_BUCK1_UV_MASK		BIT(4)
+#define TPS65219_REG_MASK_UV_BUCK2_UV_MASK		BIT(5)
+#define TPS65219_REG_MASK_UV_BUCK3_UV_MASK		BIT(6)
+#define TPS65219_REG_MASK_UV_RETRY_MASK			BIT(7)
+/* MASK Config */
+// SENSOR_N_WARM_MASK already defined in Thermal
+#define TPS65219_REG_MASK_INT_FOR_RV_MASK		BIT(4)
+#define TPS65219_REG_MASK_EFFECT_MASK			GENMASK(2, 1)
+#define TPS65219_REG_MASK_INT_FOR_PB_MASK		BIT(7)
+/* UnderVoltage - Short to GND - OverCurrent*/
+/* LDO3-4 */
+#define TPS65219_INT_LDO3_SCG_MASK			BIT(0)
+#define TPS65219_INT_LDO3_OC_MASK			BIT(1)
+#define TPS65219_INT_LDO3_UV_MASK			BIT(2)
+#define TPS65219_INT_LDO4_SCG_MASK			BIT(3)
+#define TPS65219_INT_LDO4_OC_MASK			BIT(4)
+#define TPS65219_INT_LDO4_UV_MASK			BIT(5)
+/* LDO1-2 */
+#define TPS65219_INT_LDO1_SCG_MASK			BIT(0)
+#define TPS65219_INT_LDO1_OC_MASK			BIT(1)
+#define TPS65219_INT_LDO1_UV_MASK			BIT(2)
+#define TPS65219_INT_LDO2_SCG_MASK			BIT(3)
+#define TPS65219_INT_LDO2_OC_MASK			BIT(4)
+#define TPS65219_INT_LDO2_UV_MASK			BIT(5)
+/* BUCK3 */
+#define TPS65219_INT_BUCK3_SCG_MASK			BIT(0)
+#define TPS65219_INT_BUCK3_OC_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_NEG_OC_MASK			BIT(2)
+#define TPS65219_INT_BUCK3_UV_MASK			BIT(3)
+/* BUCK1-2 */
+#define TPS65219_INT_BUCK1_SCG_MASK			BIT(0)
+#define TPS65219_INT_BUCK1_OC_MASK			BIT(1)
+#define TPS65219_INT_BUCK1_NEG_OC_MASK			BIT(2)
+#define TPS65219_INT_BUCK1_UV_MASK			BIT(3)
+#define TPS65219_INT_BUCK2_SCG_MASK			BIT(4)
+#define TPS65219_INT_BUCK2_OC_MASK			BIT(5)
+#define TPS65219_INT_BUCK2_NEG_OC_MASK			BIT(6)
+#define TPS65219_INT_BUCK2_UV_MASK			BIT(7)
+/* Thermal Sensor  */
+#define TPS65219_INT_SENSOR_3_WARM_MASK			BIT(0)
+#define TPS65219_INT_SENSOR_2_WARM_MASK			BIT(1)
+#define TPS65219_INT_SENSOR_1_WARM_MASK			BIT(2)
+#define TPS65219_INT_SENSOR_0_WARM_MASK			BIT(3)
+#define TPS65219_INT_SENSOR_3_HOT_MASK			BIT(4)
+#define TPS65219_INT_SENSOR_2_HOT_MASK			BIT(5)
+#define TPS65219_INT_SENSOR_1_HOT_MASK			BIT(6)
+#define TPS65219_INT_SENSOR_0_HOT_MASK			BIT(7)
+/* Residual Voltage */
+#define TPS65219_INT_BUCK1_RV_MASK			BIT(0)
+#define TPS65219_INT_BUCK2_RV_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_RV_MASK			BIT(2)
+#define TPS65219_INT_LDO1_RV_MASK			BIT(3)
+#define TPS65219_INT_LDO2_RV_MASK			BIT(4)
+#define TPS65219_INT_LDO3_RV_MASK			BIT(5)
+#define TPS65219_INT_LDO4_RV_MASK			BIT(6)
+/* Residual Voltage ShutDown */
+#define TPS65219_INT_BUCK1_RV_SD_MASK			BIT(0)
+#define TPS65219_INT_BUCK2_RV_SD_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_RV_SD_MASK			BIT(2)
+#define TPS65219_INT_LDO1_RV_SD_MASK			BIT(3)
+#define TPS65219_INT_LDO2_RV_SD_MASK			BIT(4)
+#define TPS65219_INT_LDO3_RV_SD_MASK			BIT(5)
+#define TPS65219_INT_LDO4_RV_SD_MASK			BIT(6)
+#define TPS65219_INT_TIMEOUT_MASK			BIT(7)
+/* Power Button */
+#define TPS65219_INT_PB_FALLING_EDGE_DETECT_MASK	BIT(0)
+#define TPS65219_INT_PB_RISING_EDGE_DETECT_MASK		BIT(1)
+#define TPS65219_INT_PB_REAL_TIME_STATUS_MASK		BIT(2)
+
+#define TPS65219_PB_POS					7
+#define TPS65219_TO_RV_POS				6
+#define TPS65219_RV_POS					5
+#define TPS65219_SYS_POS				4
+#define TPS65219_BUCK_1_2_POS				3
+#define TPS65219_BUCK_3_POS				2
+#define TPS65219_LDO_1_2_POS				1
+#define TPS65219_LDO_3_4_POS				0
+
+/* IRQs */
+enum {
+	/* LDO3-4 register IRQs */
+	TPS65219_INT_LDO3_SCG,
+	TPS65219_INT_LDO3_OC,
+	TPS65219_INT_LDO3_UV,
+	TPS65219_INT_LDO4_SCG,
+	TPS65219_INT_LDO4_OC,
+	TPS65219_INT_LDO4_UV,
+	/* LDO1-2 */
+	TPS65219_INT_LDO1_SCG,
+	TPS65219_INT_LDO1_OC,
+	TPS65219_INT_LDO1_UV,
+	TPS65219_INT_LDO2_SCG,
+	TPS65219_INT_LDO2_OC,
+	TPS65219_INT_LDO2_UV,
+	/* BUCK3 */
+	TPS65219_INT_BUCK3_SCG,
+	TPS65219_INT_BUCK3_OC,
+	TPS65219_INT_BUCK3_NEG_OC,
+	TPS65219_INT_BUCK3_UV,
+	/* BUCK1-2 */
+	TPS65219_INT_BUCK1_SCG,
+	TPS65219_INT_BUCK1_OC,
+	TPS65219_INT_BUCK1_NEG_OC,
+	TPS65219_INT_BUCK1_UV,
+	TPS65219_INT_BUCK2_SCG,
+	TPS65219_INT_BUCK2_OC,
+	TPS65219_INT_BUCK2_NEG_OC,
+	TPS65219_INT_BUCK2_UV,
+	/* Thermal Sensor  */
+	TPS65219_INT_SENSOR_3_WARM,
+	TPS65219_INT_SENSOR_2_WARM,
+	TPS65219_INT_SENSOR_1_WARM,
+	TPS65219_INT_SENSOR_0_WARM,
+	TPS65219_INT_SENSOR_3_HOT,
+	TPS65219_INT_SENSOR_2_HOT,
+	TPS65219_INT_SENSOR_1_HOT,
+	TPS65219_INT_SENSOR_0_HOT,
+	/* Residual Voltage */
+	TPS65219_INT_BUCK1_RV,
+	TPS65219_INT_BUCK2_RV,
+	TPS65219_INT_BUCK3_RV,
+	TPS65219_INT_LDO1_RV,
+	TPS65219_INT_LDO2_RV,
+	TPS65219_INT_LDO3_RV,
+	TPS65219_INT_LDO4_RV,
+	/* Residual Voltage ShutDown */
+	TPS65219_INT_BUCK1_RV_SD,
+	TPS65219_INT_BUCK2_RV_SD,
+	TPS65219_INT_BUCK3_RV_SD,
+	TPS65219_INT_LDO1_RV_SD,
+	TPS65219_INT_LDO2_RV_SD,
+	TPS65219_INT_LDO3_RV_SD,
+	TPS65219_INT_LDO4_RV_SD,
+	TPS65219_INT_TIMEOUT,
+	/* Power Button */
+	TPS65219_INT_PB_FALLING_EDGE_DETECT,
+	TPS65219_INT_PB_RISING_EDGE_DETECT,
+};
+
+enum tps65219_regulator_id {
+	/* DCDC's */
+	TPS65219_BUCK_1,
+	TPS65219_BUCK_2,
+	TPS65219_BUCK_3,
+	/* LDOs */
+	TPS65219_LDO_1,
+	TPS65219_LDO_2,
+	TPS65219_LDO_3,
+	TPS65219_LDO_4,
+};
+
+/* Number of step-down converters available */
+#define TPS65219_NUM_DCDC		3
+/* Number of LDO voltage regulators available */
+#define TPS65219_NUM_LDO		4
+/* Number of total regulators available */
+#define TPS65219_NUM_REGULATOR		(TPS65219_NUM_DCDC + TPS65219_NUM_LDO)
+
+/* Define the TPS65219 IRQ numbers */
+enum tps65219_irqs {
+	/* INT source registers */
+	TPS65219_TO_RV_SD_SET_IRQ,
+	TPS65219_RV_SET_IRQ,
+	TPS65219_SYS_SET_IRQ,
+	TPS65219_BUCK_1_2_SET_IRQ,
+	TPS65219_BUCK_3_SET_IRQ,
+	TPS65219_LDO_1_2_SET_IRQ,
+	TPS65219_LDO_3_4_SET_IRQ,
+	TPS65219_PB_SET_IRQ,
+};
+
+/**
+ * struct tps65219 - tps65219 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65219 chip
+ *
+ * @dev: MFD device
+ * @regmap: Regmap for accessing the device registers
+ * @irq_data: Regmap irq data used for the irq chip
+ * @nb: notifier block for the restart handler
+ */
+struct tps65219 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	struct regmap_irq_chip_data *irq_data;
+	struct notifier_block nb;
+};
+
+#endif /* MFD_TPS65219_H */