Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 544 insertions, 0 deletions

diff --git a/include/media/cec.h b/include/media/cec.h
new file mode 100644
index 000000000..abee41ae0
--- /dev/null
+++ b/include/media/cec.h
@@ -0,0 +1,544 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * cec - HDMI Consumer Electronics Control support header
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _MEDIA_CEC_H
+#define _MEDIA_CEC_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/kthread.h>
+#include <linux/timer.h>
+#include <linux/cec-funcs.h>
+#include <media/rc-core.h>
+
+#define CEC_CAP_DEFAULTS (CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | \
+			  CEC_CAP_PASSTHROUGH | CEC_CAP_RC)
+
+/**
+ * struct cec_devnode - cec device node
+ * @dev:	cec device
+ * @cdev:	cec character device
+ * @minor:	device node minor number
+ * @lock:	lock to serialize open/release and registration
+ * @registered:	the device was correctly registered
+ * @unregistered: the device was unregistered
+ * @lock_fhs:	lock to control access to @fhs
+ * @fhs:	the list of open filehandles (cec_fh)
+ *
+ * This structure represents a cec-related device node.
+ *
+ * To add or remove filehandles from @fhs the @lock must be taken first,
+ * followed by @lock_fhs. It is safe to access @fhs if either lock is held.
+ *
+ * The @parent is a physical device. It must be set by core or device drivers
+ * before registering the node.
+ */
+struct cec_devnode {
+	/* sysfs */
+	struct device dev;
+	struct cdev cdev;
+
+	/* device info */
+	int minor;
+	/* serialize open/release and registration */
+	struct mutex lock;
+	bool registered;
+	bool unregistered;
+	/* protect access to fhs */
+	struct mutex lock_fhs;
+	struct list_head fhs;
+};
+
+struct cec_adapter;
+struct cec_data;
+struct cec_pin;
+struct cec_notifier;
+
+struct cec_data {
+	struct list_head list;
+	struct list_head xfer_list;
+	struct cec_adapter *adap;
+	struct cec_msg msg;
+	struct cec_fh *fh;
+	struct delayed_work work;
+	struct completion c;
+	u8 attempts;
+	bool blocking;
+	bool completed;
+};
+
+struct cec_msg_entry {
+	struct list_head	list;
+	struct cec_msg		msg;
+};
+
+struct cec_event_entry {
+	struct list_head	list;
+	struct cec_event	ev;
+};
+
+#define CEC_NUM_CORE_EVENTS 2
+#define CEC_NUM_EVENTS CEC_EVENT_PIN_5V_HIGH
+
+struct cec_fh {
+	struct list_head	list;
+	struct list_head	xfer_list;
+	struct cec_adapter	*adap;
+	u8			mode_initiator;
+	u8			mode_follower;
+
+	/* Events */
+	wait_queue_head_t	wait;
+	struct mutex		lock;
+	struct list_head	events[CEC_NUM_EVENTS]; /* queued events */
+	u16			queued_events[CEC_NUM_EVENTS];
+	unsigned int		total_queued_events;
+	struct cec_event_entry	core_events[CEC_NUM_CORE_EVENTS];
+	struct list_head	msgs; /* queued messages */
+	unsigned int		queued_msgs;
+};
+
+#define CEC_SIGNAL_FREE_TIME_RETRY		3
+#define CEC_SIGNAL_FREE_TIME_NEW_INITIATOR	5
+#define CEC_SIGNAL_FREE_TIME_NEXT_XFER		7
+
+/* The nominal data bit period is 2.4 ms */
+#define CEC_FREE_TIME_TO_USEC(ft)		((ft) * 2400)
+
+struct cec_adap_ops {
+	/* Low-level callbacks */
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+	void (*adap_configured)(struct cec_adapter *adap, bool configured);
+	int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
+			     u32 signal_free_time, struct cec_msg *msg);
+	void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
+	void (*adap_free)(struct cec_adapter *adap);
+
+	/* Error injection callbacks */
+	int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
+	bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
+
+	/* High-level CEC message callback */
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+};
+
+/*
+ * The minimum message length you can receive (excepting poll messages) is 2.
+ * With a transfer rate of at most 36 bytes per second this makes 18 messages
+ * per second worst case.
+ *
+ * We queue at most 3 seconds worth of received messages. The CEC specification
+ * requires that messages are replied to within a second, so 3 seconds should
+ * give more than enough margin. Since most messages are actually more than 2
+ * bytes, this is in practice a lot more than 3 seconds.
+ */
+#define CEC_MAX_MSG_RX_QUEUE_SZ		(18 * 3)
+
+/*
+ * The transmit queue is limited to 1 second worth of messages (worst case).
+ * Messages can be transmitted by userspace and kernel space. But for both it
+ * makes no sense to have a lot of messages queued up. One second seems
+ * reasonable.
+ */
+#define CEC_MAX_MSG_TX_QUEUE_SZ		(18 * 1)
+
+/**
+ * struct cec_adapter - cec adapter structure
+ * @owner:		module owner
+ * @name:		name of the CEC adapter
+ * @devnode:		device node for the /dev/cecX device
+ * @lock:		mutex controlling access to this structure
+ * @rc:			remote control device
+ * @transmit_queue:	queue of pending transmits
+ * @transmit_queue_sz:	number of pending transmits
+ * @wait_queue:		queue of transmits waiting for a reply
+ * @transmitting:	CEC messages currently being transmitted
+ * @transmit_in_progress: true if a transmit is in progress
+ * @transmit_in_progress_aborted: true if a transmit is in progress is to be
+ *			aborted. This happens if the logical address is
+ *			invalidated while the transmit is ongoing. In that
+ *			case the transmit will finish, but will not retransmit
+ *			and be marked as ABORTED.
+ * @xfer_timeout_ms:	the transfer timeout in ms.
+ *			If 0, then timeout after 2.1 ms.
+ * @kthread_config:	kthread used to configure a CEC adapter
+ * @config_completion:	used to signal completion of the config kthread
+ * @kthread:		main CEC processing thread
+ * @kthread_waitq:	main CEC processing wait_queue
+ * @ops:		cec adapter ops
+ * @priv:		cec driver's private data
+ * @capabilities:	cec adapter capabilities
+ * @available_log_addrs: maximum number of available logical addresses
+ * @phys_addr:		the current physical address
+ * @needs_hpd:		if true, then the HDMI HotPlug Detect pin must be high
+ *	in order to transmit or receive CEC messages. This is usually a HW
+ *	limitation.
+ * @is_enabled:		the CEC adapter is enabled
+ * @is_configuring:	the CEC adapter is configuring (i.e. claiming LAs)
+ * @must_reconfigure:	while configuring, the PA changed, so reclaim LAs
+ * @is_configured:	the CEC adapter is configured (i.e. has claimed LAs)
+ * @cec_pin_is_high:	if true then the CEC pin is high. Only used with the
+ *	CEC pin framework.
+ * @adap_controls_phys_addr: if true, then the CEC adapter controls the
+ *	physical address, i.e. the CEC hardware can detect HPD changes and
+ *	read the EDID and is not dependent on an external HDMI driver.
+ *	Drivers that need this can set this field to true after the
+ *	cec_allocate_adapter() call.
+ * @last_initiator:	the initiator of the last transmitted message.
+ * @monitor_all_cnt:	number of filehandles monitoring all msgs
+ * @monitor_pin_cnt:	number of filehandles monitoring pin changes
+ * @follower_cnt:	number of filehandles in follower mode
+ * @cec_follower:	filehandle of the exclusive follower
+ * @cec_initiator:	filehandle of the exclusive initiator
+ * @passthrough:	if true, then the exclusive follower is in
+ *	passthrough mode.
+ * @log_addrs:		current logical addresses
+ * @conn_info:		current connector info
+ * @tx_timeouts:	number of transmit timeouts
+ * @notifier:		CEC notifier
+ * @pin:		CEC pin status struct
+ * @cec_dir:		debugfs cec directory
+ * @status_file:	debugfs cec status file
+ * @error_inj_file:	debugfs cec error injection file
+ * @sequence:		transmit sequence counter
+ * @input_phys:		remote control input_phys name
+ *
+ * This structure represents a cec adapter.
+ */
+struct cec_adapter {
+	struct module *owner;
+	char name[32];
+	struct cec_devnode devnode;
+	struct mutex lock;
+	struct rc_dev *rc;
+
+	struct list_head transmit_queue;
+	unsigned int transmit_queue_sz;
+	struct list_head wait_queue;
+	struct cec_data *transmitting;
+	bool transmit_in_progress;
+	bool transmit_in_progress_aborted;
+	unsigned int xfer_timeout_ms;
+
+	struct task_struct *kthread_config;
+	struct completion config_completion;
+
+	struct task_struct *kthread;
+	wait_queue_head_t kthread_waitq;
+
+	const struct cec_adap_ops *ops;
+	void *priv;
+	u32 capabilities;
+	u8 available_log_addrs;
+
+	u16 phys_addr;
+	bool needs_hpd;
+	bool is_enabled;
+	bool is_configuring;
+	bool must_reconfigure;
+	bool is_configured;
+	bool cec_pin_is_high;
+	bool adap_controls_phys_addr;
+	u8 last_initiator;
+	u32 monitor_all_cnt;
+	u32 monitor_pin_cnt;
+	u32 follower_cnt;
+	struct cec_fh *cec_follower;
+	struct cec_fh *cec_initiator;
+	bool passthrough;
+	struct cec_log_addrs log_addrs;
+	struct cec_connector_info conn_info;
+
+	u32 tx_timeouts;
+
+#ifdef CONFIG_CEC_NOTIFIER
+	struct cec_notifier *notifier;
+#endif
+#ifdef CONFIG_CEC_PIN
+	struct cec_pin *pin;
+#endif
+
+	struct dentry *cec_dir;
+
+	u32 sequence;
+
+	char input_phys[32];
+};
+
+static inline void *cec_get_drvdata(const struct cec_adapter *adap)
+{
+	return adap->priv;
+}
+
+static inline bool cec_has_log_addr(const struct cec_adapter *adap, u8 log_addr)
+{
+	return adap->log_addrs.log_addr_mask & (1 << log_addr);
+}
+
+static inline bool cec_is_sink(const struct cec_adapter *adap)
+{
+	return adap->phys_addr == 0;
+}
+
+/**
+ * cec_is_registered() - is the CEC adapter registered?
+ *
+ * @adap:	the CEC adapter, may be NULL.
+ *
+ * Return: true if the adapter is registered, false otherwise.
+ */
+static inline bool cec_is_registered(const struct cec_adapter *adap)
+{
+	return adap && adap->devnode.registered;
+}
+
+#define cec_phys_addr_exp(pa) \
+	((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf
+
+struct edid;
+struct drm_connector;
+
+#if IS_REACHABLE(CONFIG_CEC_CORE)
+struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
+		void *priv, const char *name, u32 caps, u8 available_las);
+int cec_register_adapter(struct cec_adapter *adap, struct device *parent);
+void cec_unregister_adapter(struct cec_adapter *adap);
+void cec_delete_adapter(struct cec_adapter *adap);
+
+int cec_s_log_addrs(struct cec_adapter *adap, struct cec_log_addrs *log_addrs,
+		    bool block);
+void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr,
+		     bool block);
+void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
+			       const struct edid *edid);
+void cec_s_conn_info(struct cec_adapter *adap,
+		     const struct cec_connector_info *conn_info);
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+		     bool block);
+
+/* Called by the adapter */
+void cec_transmit_done_ts(struct cec_adapter *adap, u8 status,
+			  u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
+			  u8 error_cnt, ktime_t ts);
+
+static inline void cec_transmit_done(struct cec_adapter *adap, u8 status,
+				     u8 arb_lost_cnt, u8 nack_cnt,
+				     u8 low_drive_cnt, u8 error_cnt)
+{
+	cec_transmit_done_ts(adap, status, arb_lost_cnt, nack_cnt,
+			     low_drive_cnt, error_cnt, ktime_get());
+}
+/*
+ * Simplified version of cec_transmit_done for hardware that doesn't retry
+ * failed transmits. So this is always just one attempt in which case
+ * the status is sufficient.
+ */
+void cec_transmit_attempt_done_ts(struct cec_adapter *adap,
+				  u8 status, ktime_t ts);
+
+static inline void cec_transmit_attempt_done(struct cec_adapter *adap,
+					     u8 status)
+{
+	cec_transmit_attempt_done_ts(adap, status, ktime_get());
+}
+
+void cec_received_msg_ts(struct cec_adapter *adap,
+			 struct cec_msg *msg, ktime_t ts);
+
+static inline void cec_received_msg(struct cec_adapter *adap,
+				    struct cec_msg *msg)
+{
+	cec_received_msg_ts(adap, msg, ktime_get());
+}
+
+/**
+ * cec_queue_pin_cec_event() - queue a CEC pin event with a given timestamp.
+ *
+ * @adap:	pointer to the cec adapter
+ * @is_high:	when true the CEC pin is high, otherwise it is low
+ * @dropped_events: when true some events were dropped
+ * @ts:		the timestamp for this event
+ *
+ */
+void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high,
+			     bool dropped_events, ktime_t ts);
+
+/**
+ * cec_queue_pin_hpd_event() - queue a pin event with a given timestamp.
+ *
+ * @adap:	pointer to the cec adapter
+ * @is_high:	when true the HPD pin is high, otherwise it is low
+ * @ts:		the timestamp for this event
+ *
+ */
+void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts);
+
+/**
+ * cec_queue_pin_5v_event() - queue a pin event with a given timestamp.
+ *
+ * @adap:	pointer to the cec adapter
+ * @is_high:	when true the 5V pin is high, otherwise it is low
+ * @ts:		the timestamp for this event
+ *
+ */
+void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts);
+
+/**
+ * cec_get_edid_phys_addr() - find and return the physical address
+ *
+ * @edid:	pointer to the EDID data
+ * @size:	size in bytes of the EDID data
+ * @offset:	If not %NULL then the location of the physical address
+ *		bytes in the EDID will be returned here. This is set to 0
+ *		if there is no physical address found.
+ *
+ * Return: the physical address or CEC_PHYS_ADDR_INVALID if there is none.
+ */
+u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
+			   unsigned int *offset);
+
+void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info,
+				 const struct drm_connector *connector);
+
+#else
+
+static inline int cec_register_adapter(struct cec_adapter *adap,
+				       struct device *parent)
+{
+	return 0;
+}
+
+static inline void cec_unregister_adapter(struct cec_adapter *adap)
+{
+}
+
+static inline void cec_delete_adapter(struct cec_adapter *adap)
+{
+}
+
+static inline void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr,
+				   bool block)
+{
+}
+
+static inline void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
+					     const struct edid *edid)
+{
+}
+
+static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
+					 unsigned int *offset)
+{
+	if (offset)
+		*offset = 0;
+	return CEC_PHYS_ADDR_INVALID;
+}
+
+static inline void cec_s_conn_info(struct cec_adapter *adap,
+				   const struct cec_connector_info *conn_info)
+{
+}
+
+static inline void
+cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info,
+			    const struct drm_connector *connector)
+{
+	memset(conn_info, 0, sizeof(*conn_info));
+}
+
+#endif
+
+/**
+ * cec_phys_addr_invalidate() - set the physical address to INVALID
+ *
+ * @adap:	the CEC adapter
+ *
+ * This is a simple helper function to invalidate the physical
+ * address.
+ */
+static inline void cec_phys_addr_invalidate(struct cec_adapter *adap)
+{
+	cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
+}
+
+/**
+ * cec_get_edid_spa_location() - find location of the Source Physical Address
+ *
+ * @edid: the EDID
+ * @size: the size of the EDID
+ *
+ * This EDID is expected to be a CEA-861 compliant, which means that there are
+ * at least two blocks and one or more of the extensions blocks are CEA-861
+ * blocks.
+ *
+ * The returned location is guaranteed to be <= size-2.
+ *
+ * This is an inline function since it is used by both CEC and V4L2.
+ * Ideally this would go in a module shared by both, but it is overkill to do
+ * that for just a single function.
+ */
+static inline unsigned int cec_get_edid_spa_location(const u8 *edid,
+						     unsigned int size)
+{
+	unsigned int blocks = size / 128;
+	unsigned int block;
+	u8 d;
+
+	/* Sanity check: at least 2 blocks and a multiple of the block size */
+	if (blocks < 2 || size % 128)
+		return 0;
+
+	/*
+	 * If there are fewer extension blocks than the size, then update
+	 * 'blocks'. It is allowed to have more extension blocks than the size,
+	 * since some hardware can only read e.g. 256 bytes of the EDID, even
+	 * though more blocks are present. The first CEA-861 extension block
+	 * should normally be in block 1 anyway.
+	 */
+	if (edid[0x7e] + 1 < blocks)
+		blocks = edid[0x7e] + 1;
+
+	for (block = 1; block < blocks; block++) {
+		unsigned int offset = block * 128;
+
+		/* Skip any non-CEA-861 extension blocks */
+		if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
+			continue;
+
+		/* search Vendor Specific Data Block (tag 3) */
+		d = edid[offset + 2] & 0x7f;
+		/* Check if there are Data Blocks */
+		if (d <= 4)
+			continue;
+		if (d > 4) {
+			unsigned int i = offset + 4;
+			unsigned int end = offset + d;
+
+			/* Note: 'end' is always < 'size' */
+			do {
+				u8 tag = edid[i] >> 5;
+				u8 len = edid[i] & 0x1f;
+
+				if (tag == 3 && len >= 5 && i + len <= end &&
+				    edid[i + 1] == 0x03 &&
+				    edid[i + 2] == 0x0c &&
+				    edid[i + 3] == 0x00)
+					return i + 4;
+				i += len + 1;
+			} while (i < end);
+		}
+	}
+	return 0;
+}
+
+#endif /* _MEDIA_CEC_H */