Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/include/media/drv-intf/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h
new file mode 100644
index 000000000..6b9ef631d
--- /dev/null
+++ b/include/media/drv-intf/exynos-fimc.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Samsung S5P/Exynos4 SoC series camera interface driver header
+ *
+ * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ */
+
+#ifndef S5P_FIMC_H_
+#define S5P_FIMC_H_
+
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-mediabus.h>
+
+/*
+ * Enumeration of data inputs to the camera subsystem.
+ */
+enum fimc_input {
+	FIMC_INPUT_PARALLEL_0	= 1,
+	FIMC_INPUT_PARALLEL_1,
+	FIMC_INPUT_MIPI_CSI2_0	= 3,
+	FIMC_INPUT_MIPI_CSI2_1,
+	FIMC_INPUT_WRITEBACK_A	= 5,
+	FIMC_INPUT_WRITEBACK_B,
+	FIMC_INPUT_WRITEBACK_ISP = 5,
+};
+
+/*
+ * Enumeration of the FIMC data bus types.
+ */
+enum fimc_bus_type {
+	/* Camera parallel bus */
+	FIMC_BUS_TYPE_ITU_601 = 1,
+	/* Camera parallel bus with embedded synchronization */
+	FIMC_BUS_TYPE_ITU_656,
+	/* Camera MIPI-CSI2 serial bus */
+	FIMC_BUS_TYPE_MIPI_CSI2,
+	/* FIFO link from LCD controller (WriteBack A) */
+	FIMC_BUS_TYPE_LCD_WRITEBACK_A,
+	/* FIFO link from LCD controller (WriteBack B) */
+	FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+	/* FIFO link from FIMC-IS */
+	FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+};
+
+#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2)
+#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4)
+
+/*
+ * The subdevices' group IDs.
+ */
+#define GRP_ID_SENSOR		(1 << 8)
+#define GRP_ID_FIMC_IS_SENSOR	(1 << 9)
+#define GRP_ID_WRITEBACK	(1 << 10)
+#define GRP_ID_CSIS		(1 << 11)
+#define GRP_ID_FIMC		(1 << 12)
+#define GRP_ID_FLITE		(1 << 13)
+#define GRP_ID_FIMC_IS		(1 << 14)
+
+/**
+ * struct fimc_source_info - video source description required for the host
+ *			     interface configuration
+ *
+ * @fimc_bus_type: FIMC camera input type
+ * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
+ * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ */
+struct fimc_source_info {
+	enum fimc_bus_type fimc_bus_type;
+	enum fimc_bus_type sensor_bus_type;
+	u16 flags;
+	u16 mux_id;
+};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at beginning of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
+#define FIMC_MAX_PLANES	3
+
+/**
+ * struct fimc_fmt - color format data structure
+ * @mbus_code: media bus pixel code, -1 if not applicable
+ * @fourcc: fourcc code for this format, 0 if not applicable
+ * @color: the driver's private color format id
+ * @memplanes: number of physically non-contiguous data planes
+ * @colplanes: number of physically contiguous data planes
+ * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*)
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no)
+ * @flags: flags indicating which operation mode format applies to
+ */
+struct fimc_fmt {
+	u32 mbus_code;
+	u32	fourcc;
+	u32	color;
+	u16	memplanes;
+	u16	colplanes;
+	u8	colorspace;
+	u8	depth[FIMC_MAX_PLANES];
+	u16	mdataplanes;
+	u16	flags;
+#define FMT_FLAGS_CAM		(1 << 0)
+#define FMT_FLAGS_M2M_IN	(1 << 1)
+#define FMT_FLAGS_M2M_OUT	(1 << 2)
+#define FMT_FLAGS_M2M		(1 << 1 | 1 << 2)
+#define FMT_HAS_ALPHA		(1 << 3)
+#define FMT_FLAGS_COMPRESSED	(1 << 4)
+#define FMT_FLAGS_WRITEBACK	(1 << 5)
+#define FMT_FLAGS_RAW_BAYER	(1 << 6)
+#define FMT_FLAGS_YUV		(1 << 7)
+};
+
+struct exynos_media_pipeline;
+
+/*
+ * Media pipeline operations to be called from within a video node,  i.e. the
+ * last entity within the pipeline. Implemented by related media device driver.
+ */
+struct exynos_media_pipeline_ops {
+	int (*prepare)(struct exynos_media_pipeline *p,
+						struct media_entity *me);
+	int (*unprepare)(struct exynos_media_pipeline *p);
+	int (*open)(struct exynos_media_pipeline *p, struct media_entity *me,
+							bool resume);
+	int (*close)(struct exynos_media_pipeline *p);
+	int (*set_stream)(struct exynos_media_pipeline *p, bool state);
+};
+
+struct exynos_video_entity {
+	struct video_device vdev;
+	struct exynos_media_pipeline *pipe;
+};
+
+struct exynos_media_pipeline {
+	struct media_pipeline mp;
+	const struct exynos_media_pipeline_ops *ops;
+};
+
+static inline struct exynos_video_entity *vdev_to_exynos_video_entity(
+					struct video_device *vdev)
+{
+	return container_of(vdev, struct exynos_video_entity, vdev);
+}
+
+#define fimc_pipeline_call(ent, op, args...)				  \
+	((!(ent) || !(ent)->pipe) ? -ENOENT : \
+	(((ent)->pipe->ops && (ent)->pipe->ops->op) ? \
+	(ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD))	  \
+
+#endif /* S5P_FIMC_H_ */