Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 213 insertions, 0 deletions

diff --git a/include/media/drv-intf/msp3400.h b/include/media/drv-intf/msp3400.h
new file mode 100644
index 000000000..d6dfae104
--- /dev/null
+++ b/include/media/drv-intf/msp3400.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    msp3400.h - definition for msp3400 inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _MSP3400_H_
+#define _MSP3400_H_
+
+/* msp3400 routing
+   ===============
+
+   The msp3400 has a complicated routing scheme with many possible
+   combinations. The details are all in the datasheets but I will try
+   to give a short description here.
+
+   Inputs
+   ======
+
+   There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
+   to select which tuner input to use and which SCART input to use. The
+   selected tuner input, the selected SCART input and all I2S inputs go to
+   the DSP (the tuner input first goes through the demodulator).
+
+   The DSP handles things like volume, bass/treble, balance, and some chips
+   have support for surround sound. It has several outputs: MAIN, AUX, I2S
+   and SCART1/2. Each output can select which DSP input to use. So the MAIN
+   output can select the tuner input while at the same time the SCART1 output
+   uses the I2S input.
+
+   Outputs
+   =======
+
+   Most DSP outputs are also the outputs of the msp3400. However, the SCART
+   outputs of the msp3400 can select which input to use: either the SCART1 or
+   SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
+   bypassing the DSP.
+
+   Summary
+   =======
+
+   So to specify a complete routing scheme for the msp3400 you will have to
+   specify in the 'input' arg of the s_routing function:
+
+   1) which tuner input to use
+   2) which SCART input to use
+   3) which DSP input to use for each DSP output
+
+   And in the 'output' arg of the s_routing function you specify:
+
+   1) which SCART input to use for each SCART output
+
+   Depending on how the msp is wired to the other components you can
+   ignore or mute certain inputs or outputs.
+
+   Also, depending on the msp version only a subset of the inputs or
+   outputs may be present. At the end of this header some tables are
+   added containing a list of what is available for each msp version.
+ */
+
+/* Inputs to the DSP unit: two independent selections have to be made:
+   1) the tuner (SIF) input
+   2) the SCART input
+   Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner
+   input, bits 4-7 are reserved.
+ */
+
+/* SCART input to DSP selection */
+#define MSP_IN_SCART1		0  /* Pin SC1_IN */
+#define MSP_IN_SCART2		1  /* Pin SC2_IN */
+#define MSP_IN_SCART3		2  /* Pin SC3_IN */
+#define MSP_IN_SCART4		3  /* Pin SC4_IN */
+#define MSP_IN_MONO		6  /* Pin MONO_IN */
+#define MSP_IN_MUTE		7  /* Mute DSP input */
+#define MSP_SCART_TO_DSP(in)	(in)
+/* Tuner input to demodulator and DSP selection */
+#define MSP_IN_TUNER1		0  /* Analog Sound IF input pin ANA_IN1 */
+#define MSP_IN_TUNER2		1  /* Analog Sound IF input pin ANA_IN2 */
+#define MSP_TUNER_TO_DSP(in)	((in) << 3)
+
+/* The msp has up to 5 DSP outputs, each output can independently select
+   a DSP input.
+
+   The DSP outputs are: loudspeaker output (aka MAIN), headphones output
+   (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output.
+   There also is a quasi-peak detector output, but that is not used by
+   this driver and is set to the same input as the loudspeaker output.
+   Not all outputs are supported by all msp models. Setting the input
+   of an unsupported output will be ignored by the driver.
+
+   There are up to 16 DSP inputs to choose from, so each output is
+   assigned 4 bits.
+
+   Note: the 44x8G can mix two inputs and feed the result back to the
+   DSP. This is currently not implemented. Also not implemented is the
+   multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate
+   a need for one of those features then additional support can be added. */
+#define MSP_DSP_IN_TUNER	0  /* Tuner DSP input */
+#define MSP_DSP_IN_SCART	2  /* SCART DSP input */
+#define MSP_DSP_IN_I2S1		5  /* I2S1 DSP input */
+#define MSP_DSP_IN_I2S2		6  /* I2S2 DSP input */
+#define MSP_DSP_IN_I2S3		7  /* I2S3 DSP input */
+#define MSP_DSP_IN_MAIN_AVC	11 /* MAIN AVC processed DSP input */
+#define MSP_DSP_IN_MAIN		12 /* MAIN DSP input */
+#define MSP_DSP_IN_AUX		13 /* AUX DSP input */
+#define MSP_DSP_TO_MAIN(in)	((in) << 4)
+#define MSP_DSP_TO_AUX(in)	((in) << 8)
+#define MSP_DSP_TO_SCART1(in)	((in) << 12)
+#define MSP_DSP_TO_SCART2(in)	((in) << 16)
+#define MSP_DSP_TO_I2S(in)	((in) << 20)
+
+/* Output SCART select: the SCART outputs can select which input
+   to use. */
+#define MSP_SC_IN_SCART1	0  /* SCART1 input, bypassing the DSP */
+#define MSP_SC_IN_SCART2	1  /* SCART2 input, bypassing the DSP */
+#define MSP_SC_IN_SCART3	2  /* SCART3 input, bypassing the DSP */
+#define MSP_SC_IN_SCART4	3  /* SCART4 input, bypassing the DSP */
+#define MSP_SC_IN_DSP_SCART1	4  /* DSP SCART1 input */
+#define MSP_SC_IN_DSP_SCART2	5  /* DSP SCART2 input */
+#define MSP_SC_IN_MONO		6  /* MONO input, bypassing the DSP */
+#define MSP_SC_IN_MUTE		7  /* MUTE output */
+#define MSP_SC_TO_SCART1(in)	(in)
+#define MSP_SC_TO_SCART2(in)	((in) << 4)
+
+/* Shortcut macros */
+#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \
+	(MSP_SCART_TO_DSP(sc) | \
+	 MSP_TUNER_TO_DSP(t) | \
+	 MSP_DSP_TO_MAIN(main_aux_src) | \
+	 MSP_DSP_TO_AUX(main_aux_src) | \
+	 MSP_DSP_TO_SCART1(sc_i2s_src) | \
+	 MSP_DSP_TO_SCART2(sc_i2s_src) | \
+	 MSP_DSP_TO_I2S(sc_i2s_src))
+#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \
+				    MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER)
+#define MSP_OUTPUT(sc) \
+	(MSP_SC_TO_SCART1(sc) | \
+	 MSP_SC_TO_SCART2(sc))
+/* This equals the RESET position of the msp3400 ACB register */
+#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \
+			    MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1))
+
+/* Tuner inputs vs. msp version */
+/* Chip      TUNER_1   TUNER_2
+   -------------------------
+   msp34x0b  y         y
+   msp34x0c  y         y
+   msp34x0d  y         y
+   msp34x5d  y         n
+   msp34x7d  y         n
+   msp34x0g  y         y
+   msp34x1g  y         y
+   msp34x2g  y         y
+   msp34x5g  y         n
+   msp34x7g  y         n
+   msp44x0g  y         y
+   msp44x8g  y         y
+ */
+
+/* SCART inputs vs. msp version */
+/* Chip      SC1 SC2 SC3 SC4
+   -------------------------
+   msp34x0b  y   y   y   n
+   msp34x0c  y   y   y   n
+   msp34x0d  y   y   y   y
+   msp34x5d  y   y   n   n
+   msp34x7d  y   n   n   n
+   msp34x0g  y   y   y   y
+   msp34x1g  y   y   y   y
+   msp34x2g  y   y   y   y
+   msp34x5g  y   y   n   n
+   msp34x7g  y   n   n   n
+   msp44x0g  y   y   y   y
+   msp44x8g  y   y   y   y
+ */
+
+/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */
+/* Chip      I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX
+   ------------------------------------------
+   msp34x0b  y    n    n    n        n    n
+   msp34x0c  y    y    n    n        n    n
+   msp34x0d  y    y    n    n        n    n
+   msp34x5d  y    y    n    n        n    n
+   msp34x7d  n    n    n    n        n    n
+   msp34x0g  y    y    n    n        n    n
+   msp34x1g  y    y    n    n        n    n
+   msp34x2g  y    y    n    y        y    y
+   msp34x5g  y    y    n    n        n    n
+   msp34x7g  n    n    n    n        n    n
+   msp44x0g  y    y    y    y        y    y
+   msp44x8g  y    y    y    n        n    n
+ */
+
+/* DSP outputs vs. msp version */
+/* Chip      MAIN AUX SCART1 SCART2 I2S
+   ------------------------------------
+   msp34x0b  y    y   y      n      y
+   msp34x0c  y    y   y      n      y
+   msp34x0d  y    y   y      y      y
+   msp34x5d  y    n   y      n      y
+   msp34x7d  y    n   y      n      n
+   msp34x0g  y    y   y      y      y
+   msp34x1g  y    y   y      y      y
+   msp34x2g  y    y   y      y      y
+   msp34x5g  y    n   y      n      y
+   msp34x7g  y    n   y      n      n
+   msp44x0g  y    y   y      y      y
+   msp44x8g  y    y   y      y      y
+ */
+
+#endif /* MSP3400_H */