Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 117 insertions, 0 deletions

diff --git a/include/media/i2c/tc358743.h b/include/media/i2c/tc358743.h
new file mode 100644
index 000000000..b343650c2
--- /dev/null
+++ b/include/media/i2c/tc358743.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * tc358743 - Toshiba HDMI to CSI-2 bridge
+ *
+ * Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+/*
+ * References (c = chapter, p = page):
+ * REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60
+ * REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls
+ */
+
+#ifndef _TC358743_
+#define _TC358743_
+
+enum tc358743_ddc5v_delays {
+	DDC5V_DELAY_0_MS,
+	DDC5V_DELAY_50_MS,
+	DDC5V_DELAY_100_MS,
+	DDC5V_DELAY_200_MS,
+};
+
+enum tc358743_hdmi_detection_delay {
+	HDMI_MODE_DELAY_0_MS,
+	HDMI_MODE_DELAY_25_MS,
+	HDMI_MODE_DELAY_50_MS,
+	HDMI_MODE_DELAY_100_MS,
+};
+
+struct tc358743_platform_data {
+	/* System clock connected to REFCLK (pin H5) */
+	u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */
+
+	/* DDC +5V debounce delay to avoid spurious interrupts when the cable
+	 * is connected.
+	 * Sets DDC5V_MODE in register DDC_CTL.
+	 * Default: DDC5V_DELAY_0_MS
+	 */
+	enum tc358743_ddc5v_delays ddc5v_delay;
+
+	bool enable_hdcp;
+
+	/*
+	 * The FIFO size is 512x32, so Toshiba recommend to set the default FIFO
+	 * level to somewhere in the middle (e.g. 300), so it can cover speed
+	 * mismatches in input and output ports.
+	 */
+	u16 fifo_level;
+
+	/* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */
+	u16 pll_prd;
+	u16 pll_fbd;
+
+	/* CSI
+	 * Calculate CSI parameters with REF_02 for the highest resolution your
+	 * CSI interface can handle. The driver will adjust the number of CSI
+	 * lanes in use according to the pixel clock.
+	 *
+	 * The values in brackets are calculated with REF_02 when the number of
+	 * bps pr lane is 823.5 MHz, and can serve as a starting point.
+	 */
+	u32 lineinitcnt;	/* (0x00001770) */
+	u32 lptxtimecnt;	/* (0x00000005) */
+	u32 tclk_headercnt;	/* (0x00001d04) */
+	u32 tclk_trailcnt;	/* (0x00000000) */
+	u32 ths_headercnt;	/* (0x00000505) */
+	u32 twakeup;		/* (0x00004650) */
+	u32 tclk_postcnt;	/* (0x00000000) */
+	u32 ths_trailcnt;	/* (0x00000004) */
+	u32 hstxvregcnt;	/* (0x00000005) */
+
+	/* DVI->HDMI detection delay to avoid unnecessary switching between DVI
+	 * and HDMI mode.
+	 * Sets HDMI_DET_V in register HDMI_DET.
+	 * Default: HDMI_MODE_DELAY_0_MS
+	 */
+	enum tc358743_hdmi_detection_delay hdmi_detection_delay;
+
+	/* Reset PHY automatically when TMDS clock goes from DC to AC.
+	 * Sets PHY_AUTO_RST2 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_detected;
+
+	/* Reset PHY automatically when TMDS clock passes 21 MHz.
+	 * Sets PHY_AUTO_RST3 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_in_range;
+
+	/* Reset PHY automatically when TMDS clock is detected.
+	 * Sets PHY_AUTO_RST4 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_valid;
+
+	/* Reset HDMI PHY automatically when hsync period is out of range.
+	 * Sets H_PI_RST in register HV_RST.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_hsync_out_of_range;
+
+	/* Reset HDMI PHY automatically when vsync period is out of range.
+	 * Sets V_PI_RST in register HV_RST.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_vsync_out_of_range;
+};
+
+/* custom controls */
+/* Audio sample rate in Hz */
+#define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0)
+/* Audio present status */
+#define TC358743_CID_AUDIO_PRESENT       (V4L2_CID_USER_TC358743_BASE + 1)
+
+#endif