Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 513 insertions, 0 deletions

diff --git a/include/media/media-device.h b/include/media/media-device.h
new file mode 100644
index 000000000..86716ee7c
--- /dev/null
+++ b/include/media/media-device.h
@@ -0,0 +1,513 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Media device
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ */
+
+#ifndef _MEDIA_DEVICE_H
+#define _MEDIA_DEVICE_H
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <media/media-devnode.h>
+#include <media/media-entity.h>
+
+struct ida;
+struct media_device;
+
+/**
+ * struct media_entity_notify - Media Entity Notify
+ *
+ * @list: List head
+ * @notify_data: Input data to invoke the callback
+ * @notify: Callback function pointer
+ *
+ * Drivers may register a callback to take action when new entities get
+ * registered with the media device. This handler is intended for creating
+ * links between existing entities and should not create entities and register
+ * them.
+ */
+struct media_entity_notify {
+	struct list_head list;
+	void *notify_data;
+	void (*notify)(struct media_entity *entity, void *notify_data);
+};
+
+/**
+ * struct media_device_ops - Media device operations
+ * @link_notify: Link state change notification callback. This callback is
+ *		 called with the graph_mutex held.
+ * @req_alloc: Allocate a request. Set this if you need to allocate a struct
+ *	       larger then struct media_request. @req_alloc and @req_free must
+ *	       either both be set or both be NULL.
+ * @req_free: Free a request. Set this if @req_alloc was set as well, leave
+ *	      to NULL otherwise.
+ * @req_validate: Validate a request, but do not queue yet. The req_queue_mutex
+ *	          lock is held when this op is called.
+ * @req_queue: Queue a validated request, cannot fail. If something goes
+ *	       wrong when queueing this request then it should be marked
+ *	       as such internally in the driver and any related buffers
+ *	       must eventually return to vb2 with state VB2_BUF_STATE_ERROR.
+ *	       The req_queue_mutex lock is held when this op is called.
+ *	       It is important that vb2 buffer objects are queued last after
+ *	       all other object types are queued: queueing a buffer kickstarts
+ *	       the request processing, so all other objects related to the
+ *	       request (and thus the buffer) must be available to the driver.
+ *	       And once a buffer is queued, then the driver can complete
+ *	       or delete objects from the request before req_queue exits.
+ */
+struct media_device_ops {
+	int (*link_notify)(struct media_link *link, u32 flags,
+			   unsigned int notification);
+	struct media_request *(*req_alloc)(struct media_device *mdev);
+	void (*req_free)(struct media_request *req);
+	int (*req_validate)(struct media_request *req);
+	void (*req_queue)(struct media_request *req);
+};
+
+/**
+ * struct media_device - Media device
+ * @dev:	Parent device
+ * @devnode:	Media device node
+ * @driver_name: Optional device driver name. If not set, calls to
+ *		%MEDIA_IOC_DEVICE_INFO will return ``dev->driver->name``.
+ *		This is needed for USB drivers for example, as otherwise
+ *		they'll all appear as if the driver name was "usb".
+ * @model:	Device model name
+ * @serial:	Device serial number (optional)
+ * @bus_info:	Unique and stable device location identifier
+ * @hw_revision: Hardware device revision
+ * @topology_version: Monotonic counter for storing the version of the graph
+ *		topology. Should be incremented each time the topology changes.
+ * @id:		Unique ID used on the last registered graph object
+ * @entity_internal_idx: Unique internal entity ID used by the graph traversal
+ *		algorithms
+ * @entity_internal_idx_max: Allocated internal entity indices
+ * @entities:	List of registered entities
+ * @interfaces:	List of registered interfaces
+ * @pads:	List of registered pads
+ * @links:	List of registered links
+ * @entity_notify: List of registered entity_notify callbacks
+ * @graph_mutex: Protects access to struct media_device data
+ * @pm_count_walk: Graph walk for power state walk. Access serialised using
+ *		   graph_mutex.
+ *
+ * @source_priv: Driver Private data for enable/disable source handlers
+ * @enable_source: Enable Source Handler function pointer
+ * @disable_source: Disable Source Handler function pointer
+ *
+ * @ops:	Operation handler callbacks
+ * @req_queue_mutex: Serialise the MEDIA_REQUEST_IOC_QUEUE ioctl w.r.t.
+ *		     other operations that stop or start streaming.
+ * @request_id: Used to generate unique request IDs
+ *
+ * This structure represents an abstract high-level media device. It allows easy
+ * access to entities and provides basic media device-level support. The
+ * structure can be allocated directly or embedded in a larger structure.
+ *
+ * The parent @dev is a physical device. It must be set before registering the
+ * media device.
+ *
+ * @model is a descriptive model name exported through sysfs. It doesn't have to
+ * be unique.
+ *
+ * @enable_source is a handler to find source entity for the
+ * sink entity  and activate the link between them if source
+ * entity is free. Drivers should call this handler before
+ * accessing the source.
+ *
+ * @disable_source is a handler to find source entity for the
+ * sink entity  and deactivate the link between them. Drivers
+ * should call this handler to release the source.
+ *
+ * Use-case: find tuner entity connected to the decoder
+ * entity and check if it is available, and activate the
+ * link between them from @enable_source and deactivate
+ * from @disable_source.
+ *
+ * .. note::
+ *
+ *    Bridge driver is expected to implement and set the
+ *    handler when &media_device is registered or when
+ *    bridge driver finds the media_device during probe.
+ *    Bridge driver sets source_priv with information
+ *    necessary to run @enable_source and @disable_source handlers.
+ *    Callers should hold graph_mutex to access and call @enable_source
+ *    and @disable_source handlers.
+ */
+struct media_device {
+	/* dev->driver_data points to this struct. */
+	struct device *dev;
+	struct media_devnode *devnode;
+
+	char model[32];
+	char driver_name[32];
+	char serial[40];
+	char bus_info[32];
+	u32 hw_revision;
+
+	u64 topology_version;
+
+	u32 id;
+	struct ida entity_internal_idx;
+	int entity_internal_idx_max;
+
+	struct list_head entities;
+	struct list_head interfaces;
+	struct list_head pads;
+	struct list_head links;
+
+	/* notify callback list invoked when a new entity is registered */
+	struct list_head entity_notify;
+
+	/* Serializes graph operations. */
+	struct mutex graph_mutex;
+	struct media_graph pm_count_walk;
+
+	void *source_priv;
+	int (*enable_source)(struct media_entity *entity,
+			     struct media_pipeline *pipe);
+	void (*disable_source)(struct media_entity *entity);
+
+	const struct media_device_ops *ops;
+
+	struct mutex req_queue_mutex;
+	atomic_t request_id;
+};
+
+/* We don't need to include usb.h here */
+struct usb_device;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+
+/* Supported link_notify @notification values. */
+#define MEDIA_DEV_NOTIFY_PRE_LINK_CH	0
+#define MEDIA_DEV_NOTIFY_POST_LINK_CH	1
+
+/**
+ * media_device_init() - Initializes a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * This function initializes the media device prior to its registration.
+ * The media device initialization and registration is split in two functions
+ * to avoid race conditions and make the media device available to user-space
+ * before the media graph has been completed.
+ *
+ * So drivers need to first initialize the media device, register any entity
+ * within the media device, create pad to pad links and then finally register
+ * the media device by calling media_device_register() as a final step.
+ *
+ * The caller is responsible for initializing the media device before
+ * registration. The following fields must be set:
+ *
+ * - dev must point to the parent device
+ * - model must be filled with the device model name
+ *
+ * The bus_info field is set by media_device_init() for PCI and platform devices
+ * if the field begins with '\0'.
+ */
+void media_device_init(struct media_device *mdev);
+
+/**
+ * media_device_cleanup() - Cleanups a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * This function that will destroy the graph_mutex that is
+ * initialized in media_device_init().
+ */
+void media_device_cleanup(struct media_device *mdev);
+
+/**
+ * __media_device_register() - Registers a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ * @owner:	should be filled with %THIS_MODULE
+ *
+ * Users, should, instead, call the media_device_register() macro.
+ *
+ * The caller is responsible for initializing the &media_device structure
+ * before registration. The following fields of &media_device must be set:
+ *
+ *  - &media_device.model must be filled with the device model name as a
+ *    NUL-terminated UTF-8 string. The device/model revision must not be
+ *    stored in this field.
+ *
+ * The following fields are optional:
+ *
+ *  - &media_device.serial is a unique serial number stored as a
+ *    NUL-terminated ASCII string. The field is big enough to store a GUID
+ *    in text form. If the hardware doesn't provide a unique serial number
+ *    this field must be left empty.
+ *
+ *  - &media_device.bus_info represents the location of the device in the
+ *    system as a NUL-terminated ASCII string. For PCI/PCIe devices
+ *    &media_device.bus_info must be set to "PCI:" (or "PCIe:") followed by
+ *    the value of pci_name(). For USB devices,the usb_make_path() function
+ *    must be used. This field is used by applications to distinguish between
+ *    otherwise identical devices that don't provide a serial number.
+ *
+ *  - &media_device.hw_revision is the hardware device revision in a
+ *    driver-specific format. When possible the revision should be formatted
+ *    with the KERNEL_VERSION() macro.
+ *
+ * .. note::
+ *
+ *    #) Upon successful registration a character device named media[0-9]+ is created. The device major and minor numbers are dynamic. The model name is exported as a sysfs attribute.
+ *
+ *    #) Unregistering a media device that hasn't been registered is **NOT** safe.
+ *
+ * Return: returns zero on success or a negative error code.
+ */
+int __must_check __media_device_register(struct media_device *mdev,
+					 struct module *owner);
+
+
+/**
+ * media_device_register() - Registers a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * This macro calls __media_device_register() passing %THIS_MODULE as
+ * the __media_device_register() second argument (**owner**).
+ */
+#define media_device_register(mdev) __media_device_register(mdev, THIS_MODULE)
+
+/**
+ * media_device_unregister() - Unregisters a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * It is safe to call this function on an unregistered (but initialised)
+ * media device.
+ */
+void media_device_unregister(struct media_device *mdev);
+
+/**
+ * media_device_register_entity() - registers a media entity inside a
+ *	previously registered media device.
+ *
+ * @mdev:	pointer to struct &media_device
+ * @entity:	pointer to struct &media_entity to be registered
+ *
+ * Entities are identified by a unique positive integer ID. The media
+ * controller framework will such ID automatically. IDs are not guaranteed
+ * to be contiguous, and the ID number can change on newer Kernel versions.
+ * So, neither the driver nor userspace should hardcode ID numbers to refer
+ * to the entities, but, instead, use the framework to find the ID, when
+ * needed.
+ *
+ * The media_entity name, type and flags fields should be initialized before
+ * calling media_device_register_entity(). Entities embedded in higher-level
+ * standard structures can have some of those fields set by the higher-level
+ * framework.
+ *
+ * If the device has pads, media_entity_pads_init() should be called before
+ * this function. Otherwise, the &media_entity.pad and &media_entity.num_pads
+ * should be zeroed before calling this function.
+ *
+ * Entities have flags that describe the entity capabilities and state:
+ *
+ * %MEDIA_ENT_FL_DEFAULT
+ *    indicates the default entity for a given type.
+ *    This can be used to report the default audio and video devices or the
+ *    default camera sensor.
+ *
+ * .. note::
+ *
+ *    Drivers should set the entity function before calling this function.
+ *    Please notice that the values %MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN and
+ *    %MEDIA_ENT_F_UNKNOWN should not be used by the drivers.
+ */
+int __must_check media_device_register_entity(struct media_device *mdev,
+					      struct media_entity *entity);
+
+/**
+ * media_device_unregister_entity() - unregisters a media entity.
+ *
+ * @entity:	pointer to struct &media_entity to be unregistered
+ *
+ * All links associated with the entity and all PADs are automatically
+ * unregistered from the media_device when this function is called.
+ *
+ * Unregistering an entity will not change the IDs of the other entities and
+ * the previoully used ID will never be reused for a newly registered entities.
+ *
+ * When a media device is unregistered, all its entities are unregistered
+ * automatically. No manual entities unregistration is then required.
+ *
+ * .. note::
+ *
+ *    The media_entity instance itself must be freed explicitly by
+ *    the driver if required.
+ */
+void media_device_unregister_entity(struct media_entity *entity);
+
+/**
+ * media_device_register_entity_notify() - Registers a media entity_notify
+ *					   callback
+ *
+ * @mdev:      The media device
+ * @nptr:      The media_entity_notify
+ *
+ * .. note::
+ *
+ *    When a new entity is registered, all the registered
+ *    media_entity_notify callbacks are invoked.
+ */
+
+int __must_check media_device_register_entity_notify(struct media_device *mdev,
+					struct media_entity_notify *nptr);
+
+/**
+ * media_device_unregister_entity_notify() - Unregister a media entity notify
+ *					     callback
+ *
+ * @mdev:      The media device
+ * @nptr:      The media_entity_notify
+ *
+ */
+void media_device_unregister_entity_notify(struct media_device *mdev,
+					struct media_entity_notify *nptr);
+
+/* Iterate over all entities. */
+#define media_device_for_each_entity(entity, mdev)			\
+	list_for_each_entry(entity, &(mdev)->entities, graph_obj.list)
+
+/* Iterate over all interfaces. */
+#define media_device_for_each_intf(intf, mdev)			\
+	list_for_each_entry(intf, &(mdev)->interfaces, graph_obj.list)
+
+/* Iterate over all pads. */
+#define media_device_for_each_pad(pad, mdev)			\
+	list_for_each_entry(pad, &(mdev)->pads, graph_obj.list)
+
+/* Iterate over all links. */
+#define media_device_for_each_link(link, mdev)			\
+	list_for_each_entry(link, &(mdev)->links, graph_obj.list)
+
+/**
+ * media_device_pci_init() - create and initialize a
+ *	struct &media_device from a PCI device.
+ *
+ * @mdev:	pointer to struct &media_device
+ * @pci_dev:	pointer to struct pci_dev
+ * @name:	media device name. If %NULL, the routine will use the default
+ *		name for the pci device, given by pci_name() macro.
+ */
+void media_device_pci_init(struct media_device *mdev,
+			   struct pci_dev *pci_dev,
+			   const char *name);
+/**
+ * __media_device_usb_init() - create and initialize a
+ *	struct &media_device from a PCI device.
+ *
+ * @mdev:	pointer to struct &media_device
+ * @udev:	pointer to struct usb_device
+ * @board_name:	media device name. If %NULL, the routine will use the usb
+ *		product name, if available.
+ * @driver_name: name of the driver. if %NULL, the routine will use the name
+ *		given by ``udev->dev->driver->name``, with is usually the wrong
+ *		thing to do.
+ *
+ * .. note::
+ *
+ *    It is better to call media_device_usb_init() instead, as
+ *    such macro fills driver_name with %KBUILD_MODNAME.
+ */
+void __media_device_usb_init(struct media_device *mdev,
+			     struct usb_device *udev,
+			     const char *board_name,
+			     const char *driver_name);
+
+#else
+static inline int media_device_register(struct media_device *mdev)
+{
+	return 0;
+}
+static inline void media_device_unregister(struct media_device *mdev)
+{
+}
+static inline int media_device_register_entity(struct media_device *mdev,
+						struct media_entity *entity)
+{
+	return 0;
+}
+static inline void media_device_unregister_entity(struct media_entity *entity)
+{
+}
+static inline int media_device_register_entity_notify(
+					struct media_device *mdev,
+					struct media_entity_notify *nptr)
+{
+	return 0;
+}
+static inline void media_device_unregister_entity_notify(
+					struct media_device *mdev,
+					struct media_entity_notify *nptr)
+{
+}
+
+static inline void media_device_pci_init(struct media_device *mdev,
+					 struct pci_dev *pci_dev,
+					 char *name)
+{
+}
+
+static inline void __media_device_usb_init(struct media_device *mdev,
+					   struct usb_device *udev,
+					   char *board_name,
+					   char *driver_name)
+{
+}
+
+#endif /* CONFIG_MEDIA_CONTROLLER */
+
+/**
+ * media_device_usb_init() - create and initialize a
+ *	struct &media_device from a PCI device.
+ *
+ * @mdev:	pointer to struct &media_device
+ * @udev:	pointer to struct usb_device
+ * @name:	media device name. If %NULL, the routine will use the usb
+ *		product name, if available.
+ *
+ * This macro calls media_device_usb_init() passing the
+ * media_device_usb_init() **driver_name** parameter filled with
+ * %KBUILD_MODNAME.
+ */
+#define media_device_usb_init(mdev, udev, name) \
+	__media_device_usb_init(mdev, udev, name, KBUILD_MODNAME)
+
+/**
+ * media_set_bus_info() - Set bus_info field
+ *
+ * @bus_info:		Variable where to write the bus info (char array)
+ * @bus_info_size:	Length of the bus_info
+ * @dev:		Related struct device
+ *
+ * Sets bus information based on &dev. This is currently done for PCI and
+ * platform devices. dev is required to be non-NULL for this to happen.
+ *
+ * This function is not meant to be called from drivers.
+ */
+static inline void
+media_set_bus_info(char *bus_info, size_t bus_info_size, struct device *dev)
+{
+	if (!dev)
+		strscpy(bus_info, "no bus info", bus_info_size);
+	else if (dev_is_platform(dev))
+		snprintf(bus_info, bus_info_size, "platform:%s", dev_name(dev));
+	else if (dev_is_pci(dev))
+		snprintf(bus_info, bus_info_size, "PCI:%s", dev_name(dev));
+}
+
+#endif