Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 660 insertions, 0 deletions

diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
new file mode 100644
index 000000000..df85d19fb
--- /dev/null
+++ b/include/net/iucv/af_iucv.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2006 IBM Corporation
+ * IUCV protocol stack for Linux on zSeries
+ * Version 1.0
+ * Author(s): Jennifer Hunt <jenhunt@us.ibm.com>
+ *
+ */
+
+#ifndef __AFIUCV_H
+#define __AFIUCV_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/socket.h>
+#include <net/iucv/iucv.h>
+
+#ifndef AF_IUCV
+#define AF_IUCV		32
+#define PF_IUCV		AF_IUCV
+#endif
+
+/* Connection and socket states */
+enum {
+	IUCV_CONNECTED = 1,
+	IUCV_OPEN,
+	IUCV_BOUND,
+	IUCV_LISTEN,
+	IUCV_DISCONN,
+	IUCV_CLOSING,
+	IUCV_CLOSED
+};
+
+#define IUCV_QUEUELEN_DEFAULT	65535
+#define IUCV_HIPER_MSGLIM_DEFAULT	128
+#define IUCV_CONN_TIMEOUT	(HZ * 40)
+#define IUCV_DISCONN_TIMEOUT	(HZ * 2)
+#define IUCV_CONN_IDLE_TIMEOUT	(HZ * 60)
+#define IUCV_BUFSIZE_DEFAULT	32768
+
+/* IUCV socket address */
+struct sockaddr_iucv {
+	sa_family_t	siucv_family;
+	unsigned short	siucv_port;		/* Reserved */
+	unsigned int	siucv_addr;		/* Reserved */
+	char		siucv_nodeid[8];	/* Reserved */
+	char		siucv_user_id[8];	/* Guest User Id */
+	char		siucv_name[8];		/* Application Name */
+};
+
+
+/* Common socket structures and functions */
+struct sock_msg_q {
+	struct iucv_path	*path;
+	struct iucv_message	msg;
+	struct list_head	list;
+	spinlock_t		lock;
+};
+
+#define AF_IUCV_FLAG_ACK 0x1
+#define AF_IUCV_FLAG_SYN 0x2
+#define AF_IUCV_FLAG_FIN 0x4
+#define AF_IUCV_FLAG_WIN 0x8
+#define AF_IUCV_FLAG_SHT 0x10
+
+struct af_iucv_trans_hdr {
+	u16 magic;
+	u8 version;
+	u8 flags;
+	u16 window;
+	char destNodeID[8];
+	char destUserID[8];
+	char destAppName[16];
+	char srcNodeID[8];
+	char srcUserID[8];
+	char srcAppName[16];             /* => 70 bytes */
+	struct iucv_message iucv_hdr;    /* => 33 bytes */
+	u8 pad;                          /* total 104 bytes */
+} __packed;
+
+static inline struct af_iucv_trans_hdr *iucv_trans_hdr(struct sk_buff *skb)
+{
+	return (struct af_iucv_trans_hdr *)skb_network_header(skb);
+}
+
+enum iucv_tx_notify {
+	/* transmission of skb is completed and was successful */
+	TX_NOTIFY_OK = 0,
+	/* target is unreachable */
+	TX_NOTIFY_UNREACHABLE = 1,
+	/* transfer pending queue full */
+	TX_NOTIFY_TPQFULL = 2,
+	/* general error */
+	TX_NOTIFY_GENERALERROR = 3,
+	/* transmission of skb is pending - may interleave
+	 * with TX_NOTIFY_DELAYED_* */
+	TX_NOTIFY_PENDING = 4,
+	/* transmission of skb was done successfully (delayed) */
+	TX_NOTIFY_DELAYED_OK = 5,
+	/* target unreachable (detected delayed) */
+	TX_NOTIFY_DELAYED_UNREACHABLE = 6,
+	/* general error (detected delayed) */
+	TX_NOTIFY_DELAYED_GENERALERROR = 7,
+};
+
+#define iucv_sk(__sk) ((struct iucv_sock *) __sk)
+
+#define AF_IUCV_TRANS_IUCV 0
+#define AF_IUCV_TRANS_HIPER 1
+
+struct iucv_sock {
+	struct sock		sk;
+	struct_group(init,
+		char		src_user_id[8];
+		char		src_name[8];
+		char		dst_user_id[8];
+		char		dst_name[8];
+	);
+	struct list_head	accept_q;
+	spinlock_t		accept_q_lock;
+	struct sock		*parent;
+	struct iucv_path	*path;
+	struct net_device	*hs_dev;
+	struct sk_buff_head	send_skb_q;
+	struct sk_buff_head	backlog_skb_q;
+	struct sock_msg_q	message_q;
+	unsigned int		send_tag;
+	u8			flags;
+	u16			msglimit;
+	u16			msglimit_peer;
+	atomic_t		skbs_in_xmit;
+	atomic_t		msg_sent;
+	atomic_t		msg_recv;
+	atomic_t		pendings;
+	int			transport;
+	void			(*sk_txnotify)(struct sock *sk,
+					       enum iucv_tx_notify n);
+};
+
+struct iucv_skb_cb {
+	u32	class;		/* target class of message */
+	u32	tag;		/* tag associated with message */
+	u32	offset;		/* offset for skb receival */
+};
+
+#define IUCV_SKB_CB(__skb)	((struct iucv_skb_cb *)&((__skb)->cb[0]))
+
+/* iucv socket options (SOL_IUCV) */
+#define SO_IPRMDATA_MSG	0x0080		/* send/recv IPRM_DATA msgs */
+#define SO_MSGLIMIT	0x1000		/* get/set IUCV MSGLIMIT */
+#define SO_MSGSIZE	0x0800		/* get maximum msgsize */
+
+/* iucv related control messages (scm) */
+#define SCM_IUCV_TRGCLS	0x0001		/* target class control message */
+
+struct iucv_sock_list {
+	struct hlist_head head;
+	rwlock_t	  lock;
+	atomic_t	  autobind_name;
+};
+
+#endif /* __IUCV_H */
diff --git a/include/net/iucv/iucv.h b/include/net/iucv/iucv.h
new file mode 100644
index 000000000..f9e88401d
--- /dev/null
+++ b/include/net/iucv/iucv.h
@@ -0,0 +1,496 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  drivers/s390/net/iucv.h
+ *    IUCV base support.
+ *
+ *  S390 version
+ *    Copyright 2000, 2006 IBM Corporation
+ *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
+ *		Xenia Tkatschow (xenia@us.ibm.com)
+ *    Rewritten for af_iucv:
+ *	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *
+ *
+ * Functionality:
+ * To explore any of the IUCV functions, one must first register their
+ * program using iucv_register(). Once your program has successfully
+ * completed a register, it can exploit the other functions.
+ * For furthur reference on all IUCV functionality, refer to the
+ * CP Programming Services book, also available on the web thru
+ * www.vm.ibm.com/pubs, manual # SC24-6084
+ *
+ * Definition of Return Codes
+ * - All positive return codes including zero are reflected back
+ *   from CP. The definition of each return code can be found in
+ *   CP Programming Services book.
+ * - Return Code of:
+ *   -EINVAL: Invalid value
+ *   -ENOMEM: storage allocation failed
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/debug.h>
+
+/*
+ * IUCV option flags usable by device drivers:
+ *
+ * IUCV_IPRMDATA  Indicates that your program can handle a message in the
+ *		  parameter list / a message is sent in the parameter list.
+ *		  Used for iucv_path_accept, iucv_path_connect,
+ *		  iucv_message_reply, iucv_message_send, iucv_message_send2way.
+ * IUCV_IPQUSCE	  Indicates that you do not want to receive messages on this
+ *		  path until an iucv_path_resume is issued.
+ *		  Used for iucv_path_accept, iucv_path_connect.
+ * IUCV_IPBUFLST  Indicates that an address list is used for the message data.
+ *		  Used for iucv_message_receive, iucv_message_send,
+ *		  iucv_message_send2way.
+ * IUCV_IPPRTY	  Specifies that you want to send priority messages.
+ *		  Used for iucv_path_accept, iucv_path_connect,
+ *		  iucv_message_reply, iucv_message_send, iucv_message_send2way.
+ * IUCV_IPSYNC	  Indicates a synchronous send request.
+ *		  Used for iucv_message_send, iucv_message_send2way.
+ * IUCV_IPANSLST  Indicates that an address list is used for the reply data.
+ *		  Used for iucv_message_reply, iucv_message_send2way.
+ * IUCV_IPLOCAL	  Specifies that the communication partner has to be on the
+ *		  local system. If local is specified no target class can be
+ *		  specified.
+ *		  Used for iucv_path_connect.
+ *
+ * All flags are defined in the input field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ */
+#define IUCV_IPRMDATA	0x80
+#define IUCV_IPQUSCE	0x40
+#define IUCV_IPBUFLST	0x40
+#define IUCV_IPPRTY	0x20
+#define IUCV_IPANSLST	0x08
+#define IUCV_IPSYNC	0x04
+#define IUCV_IPLOCAL	0x01
+
+/*
+ * iucv_array : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
+ * Use a pointer to an iucv_array as the buffer, reply or answer
+ * parameter on iucv_message_send, iucv_message_send2way, iucv_message_receive
+ * and iucv_message_reply if IUCV_IPBUFLST or IUCV_IPANSLST are used.
+ */
+struct iucv_array {
+	u32 address;
+	u32 length;
+} __attribute__ ((aligned (8)));
+
+extern struct bus_type iucv_bus;
+extern struct device *iucv_root;
+
+/*
+ * struct iucv_path
+ * pathid: 16 bit path identification
+ * msglim: 16 bit message limit
+ * flags: properties of the path: IPRMDATA, IPQUSCE, IPPRTY
+ * handler:  address of iucv handler structure
+ * private: private information of the handler associated with the path
+ * list: list_head for the iucv_handler path list.
+ */
+struct iucv_path {
+	u16 pathid;
+	u16 msglim;
+	u8  flags;
+	void *private;
+	struct iucv_handler *handler;
+	struct list_head list;
+};
+
+/*
+ * struct iucv_message
+ * id: 32 bit message id
+ * audit: 32 bit error information of purged or replied messages
+ * class: 32 bit target class of a message (source class for replies)
+ * tag: 32 bit tag to be associated with the message
+ * length: 32 bit length of the message / reply
+ * reply_size: 32 bit maximum allowed length of the reply
+ * rmmsg: 8 byte inline message
+ * flags: message properties (IUCV_IPPRTY)
+ */
+struct iucv_message {
+	u32 id;
+	u32 audit;
+	u32 class;
+	u32 tag;
+	u32 length;
+	u32 reply_size;
+	u8  rmmsg[8];
+	u8  flags;
+} __packed;
+
+/*
+ * struct iucv_handler
+ *
+ * A vector of functions that handle IUCV interrupts. Each functions gets
+ * a parameter area as defined by the CP Programming Services and private
+ * pointer that is provided by the user of the interface.
+ */
+struct iucv_handler {
+	 /*
+	  * The path_pending function is called after an iucv interrupt
+	  * type 0x01 has been received. The base code allocates a path
+	  * structure and "asks" the handler if this path belongs to the
+	  * handler. To accept the path the path_pending function needs
+	  * to call iucv_path_accept and return 0. If the callback returns
+	  * a value != 0 the iucv base code will continue with the next
+	  * handler. The order in which the path_pending functions are
+	  * called is the order of the registration of the iucv handlers
+	  * to the base code.
+	  */
+	int  (*path_pending)(struct iucv_path *, u8 *ipvmid, u8 *ipuser);
+	/*
+	 * The path_complete function is called after an iucv interrupt
+	 * type 0x02 has been received for a path that has been established
+	 * for this handler with iucv_path_connect and got accepted by the
+	 * peer with iucv_path_accept.
+	 */
+	void (*path_complete)(struct iucv_path *, u8 *ipuser);
+	 /*
+	  * The path_severed function is called after an iucv interrupt
+	  * type 0x03 has been received. The communication peer shutdown
+	  * his end of the communication path. The path still exists and
+	  * remaining messages can be received until a iucv_path_sever
+	  * shuts down the other end of the path as well.
+	  */
+	void (*path_severed)(struct iucv_path *, u8 *ipuser);
+	/*
+	 * The path_quiesced function is called after an icuv interrupt
+	 * type 0x04 has been received. The communication peer has quiesced
+	 * the path. Delivery of messages is stopped until iucv_path_resume
+	 * has been called.
+	 */
+	void (*path_quiesced)(struct iucv_path *, u8 *ipuser);
+	/*
+	 * The path_resumed function is called after an icuv interrupt
+	 * type 0x05 has been received. The communication peer has resumed
+	 * the path.
+	 */
+	void (*path_resumed)(struct iucv_path *, u8 *ipuser);
+	/*
+	 * The message_pending function is called after an icuv interrupt
+	 * type 0x06 or type 0x07 has been received. A new message is
+	 * available and can be received with iucv_message_receive.
+	 */
+	void (*message_pending)(struct iucv_path *, struct iucv_message *);
+	/*
+	 * The message_complete function is called after an icuv interrupt
+	 * type 0x08 or type 0x09 has been received. A message send with
+	 * iucv_message_send2way has been replied to. The reply can be
+	 * received with iucv_message_receive.
+	 */
+	void (*message_complete)(struct iucv_path *, struct iucv_message *);
+
+	struct list_head list;
+	struct list_head paths;
+};
+
+/**
+ * iucv_register:
+ * @handler: address of iucv handler structure
+ * @smp: != 0 indicates that the handler can deal with out of order messages
+ *
+ * Registers a driver with IUCV.
+ *
+ * Returns 0 on success, -ENOMEM if the memory allocation for the pathid
+ * table failed, or -EIO if IUCV_DECLARE_BUFFER failed on all cpus.
+ */
+int iucv_register(struct iucv_handler *handler, int smp);
+
+/**
+ * iucv_unregister
+ * @handler:  address of iucv handler structure
+ * @smp: != 0 indicates that the handler can deal with out of order messages
+ *
+ * Unregister driver from IUCV.
+ */
+void iucv_unregister(struct iucv_handler *handle, int smp);
+
+/**
+ * iucv_path_alloc
+ * @msglim: initial message limit
+ * @flags: initial flags
+ * @gfp: kmalloc allocation flag
+ *
+ * Allocate a new path structure for use with iucv_connect.
+ *
+ * Returns NULL if the memory allocation failed or a pointer to the
+ * path structure.
+ */
+static inline struct iucv_path *iucv_path_alloc(u16 msglim, u8 flags, gfp_t gfp)
+{
+	struct iucv_path *path;
+
+	path = kzalloc(sizeof(struct iucv_path), gfp);
+	if (path) {
+		path->msglim = msglim;
+		path->flags = flags;
+	}
+	return path;
+}
+
+/**
+ * iucv_path_free
+ * @path: address of iucv path structure
+ *
+ * Frees a path structure.
+ */
+static inline void iucv_path_free(struct iucv_path *path)
+{
+	kfree(path);
+}
+
+/**
+ * iucv_path_accept
+ * @path: address of iucv path structure
+ * @handler: address of iucv handler structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ * @private: private data passed to interrupt handlers for this path
+ *
+ * This function is issued after the user received a connection pending
+ * external interrupt and now wishes to complete the IUCV communication path.
+ *
+ * Returns the result of the CP IUCV call.
+ */
+int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
+		     u8 *userdata, void *private);
+
+/**
+ * iucv_path_connect
+ * @path: address of iucv path structure
+ * @handler: address of iucv handler structure
+ * @userid: 8-byte user identification
+ * @system: 8-byte target system identification
+ * @userdata: 16 bytes of data reflected to the communication partner
+ * @private: private data passed to interrupt handlers for this path
+ *
+ * This function establishes an IUCV path. Although the connect may complete
+ * successfully, you are not able to use the path until you receive an IUCV
+ * Connection Complete external interrupt.
+ *
+ * Returns the result of the CP IUCV call.
+ */
+int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
+		      u8 *userid, u8 *system, u8 *userdata,
+		      void *private);
+
+/**
+ * iucv_path_quiesce:
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function temporarily suspends incoming messages on an IUCV path.
+ * You can later reactivate the path by invoking the iucv_resume function.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_quiesce(struct iucv_path *path, u8 *userdata);
+
+/**
+ * iucv_path_resume:
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function resumes incoming messages on an IUCV path that has
+ * been stopped with iucv_path_quiesce.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_resume(struct iucv_path *path, u8 *userdata);
+
+/**
+ * iucv_path_sever
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function terminates an IUCV path.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_sever(struct iucv_path *path, u8 *userdata);
+
+/**
+ * iucv_message_purge
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @srccls: source class of message
+ *
+ * Cancels a message you have sent.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
+		       u32 srccls);
+
+/**
+ * iucv_message_receive
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: flags that affect how the message is received (IUCV_IPBUFLST)
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of data buffer
+ * @residual:
+ *
+ * This function receives messages that are being sent to you over
+ * established paths. This function will deal with RMDATA messages
+ * embedded in struct iucv_message as well.
+ *
+ * Locking:	local_bh_enable/local_bh_disable
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
+			 u8 flags, void *buffer, size_t size, size_t *residual);
+
+/**
+ * __iucv_message_receive
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: flags that affect how the message is received (IUCV_IPBUFLST)
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of data buffer
+ * @residual:
+ *
+ * This function receives messages that are being sent to you over
+ * established paths. This function will deal with RMDATA messages
+ * embedded in struct iucv_message as well.
+ *
+ * Locking:	no locking.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
+			   u8 flags, void *buffer, size_t size,
+			   size_t *residual);
+
+/**
+ * iucv_message_reject
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ *
+ * The reject function refuses a specified message. Between the time you
+ * are notified of a message and the time that you complete the message,
+ * the message may be rejected.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg);
+
+/**
+ * iucv_message_reply
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the reply is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @reply: address of data buffer or address of struct iucv_array
+ * @size: length of reply data buffer
+ *
+ * This function responds to the two-way messages that you receive. You
+ * must identify completely the message to which you wish to reply. ie,
+ * pathid, msgid, and trgcls. Prmmsg signifies the data is moved into
+ * the parameter list.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
+		       u8 flags, void *reply, size_t size);
+
+/**
+ * iucv_message_send
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer and this is a one-way message and the
+ * receiver will not reply to the message.
+ *
+ * Locking:	local_bh_enable/local_bh_disable
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
+		      u8 flags, u32 srccls, void *buffer, size_t size);
+
+/**
+ * __iucv_message_send
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer and this is a one-way message and the
+ * receiver will not reply to the message.
+ *
+ * Locking:	no locking.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
+			u8 flags, u32 srccls, void *buffer, size_t size);
+
+/**
+ * iucv_message_send2way
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent and the reply is received
+ *	   (IUCV_IPRMDATA, IUCV_IPBUFLST, IUCV_IPPRTY, IUCV_ANSLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ * @ansbuf: address of answer buffer or address of struct iucv_array
+ * @asize: size of reply buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer. The receiver of the send is expected to
+ * reply to the message and a buffer is provided into which IUCV moves
+ * the reply to this message.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
+			  u8 flags, u32 srccls, void *buffer, size_t size,
+			  void *answer, size_t asize, size_t *residual);
+
+struct iucv_interface {
+	int (*message_receive)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, void *buffer, size_t size, size_t *residual);
+	int (*__message_receive)(struct iucv_path *path,
+		struct iucv_message *msg, u8 flags, void *buffer, size_t size,
+		size_t *residual);
+	int (*message_reply)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, void *reply, size_t size);
+	int (*message_reject)(struct iucv_path *path, struct iucv_message *msg);
+	int (*message_send)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, u32 srccls, void *buffer, size_t size);
+	int (*__message_send)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, u32 srccls, void *buffer, size_t size);
+	int (*message_send2way)(struct iucv_path *path,
+		struct iucv_message *msg, u8 flags, u32 srccls, void *buffer,
+		size_t size, void *answer, size_t asize, size_t *residual);
+	int (*message_purge)(struct iucv_path *path, struct iucv_message *msg,
+		u32 srccls);
+	int (*path_accept)(struct iucv_path *path, struct iucv_handler *handler,
+		u8 userdata[16], void *private);
+	int (*path_connect)(struct iucv_path *path,
+		struct iucv_handler *handler,
+		u8 userid[8], u8 system[8], u8 userdata[16], void *private);
+	int (*path_quiesce)(struct iucv_path *path, u8 userdata[16]);
+	int (*path_resume)(struct iucv_path *path, u8 userdata[16]);
+	int (*path_sever)(struct iucv_path *path, u8 userdata[16]);
+	int (*iucv_register)(struct iucv_handler *handler, int smp);
+	void (*iucv_unregister)(struct iucv_handler *handler, int smp);
+	struct bus_type *bus;
+	struct device *root;
+};
+
+extern struct iucv_interface iucv_if;