Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 552 insertions, 0 deletions

diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
new file mode 100644
index 000000000..d2ea5863e
--- /dev/null
+++ b/include/net/iw_handler.h
@@ -0,0 +1,552 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file define the new driver API for Wireless Extensions
+ *
+ * Version :	8	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 2001-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _IW_HANDLER_H
+#define _IW_HANDLER_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial driver API (1996 -> onward) :
+ * -----------------------------------
+ * The initial API just sends the IOCTL request received from user space
+ * to the driver (via the driver ioctl handler). The driver has to
+ * handle all the rest...
+ *
+ * The initial API also defines a specific handler in struct net_device
+ * to handle wireless statistics.
+ *
+ * The initial APIs served us well and has proven a reasonably good design.
+ * However, there is a few shortcommings :
+ *	o No events, everything is a request to the driver.
+ *	o Large ioctl function in driver with gigantic switch statement
+ *	  (i.e. spaghetti code).
+ *	o Driver has to mess up with copy_to/from_user, and in many cases
+ *	  does it unproperly. Common mistakes are :
+ *		* buffer overflows (no checks or off by one checks)
+ *		* call copy_to/from_user with irq disabled
+ *	o The user space interface is tied to ioctl because of the use
+ *	  copy_to/from_user.
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * The new driver API is just a bunch of standard functions (handlers),
+ * each handling a specific Wireless Extension. The driver just export
+ * the list of handler it supports, and those will be called apropriately.
+ *
+ * I tried to keep the main advantage of the previous API (simplicity,
+ * efficiency and light weight), and also I provide a good dose of backward
+ * compatibility (most structures are the same, driver can use both API
+ * simultaneously, ...).
+ * Hopefully, I've also addressed the shortcomming of the initial API.
+ *
+ * The advantage of the new API are :
+ *	o Handling of Extensions in driver broken in small contained functions
+ *	o Tighter checks of ioctl before calling the driver
+ *	o Flexible commit strategy (at least, the start of it)
+ *	o Backward compatibility (can be mixed with old API)
+ *	o Driver doesn't have to worry about memory and user-space issues
+ * The last point is important for the following reasons :
+ *	o You are now able to call the new driver API from any API you
+ *		want (including from within other parts of the kernel).
+ *	o Common mistakes are avoided (buffer overflow, user space copy
+ *		with irq disabled and so on).
+ *
+ * The Drawback of the new API are :
+ *	o bloat (especially kernel)
+ *	o need to migrate existing drivers to new API
+ * My initial testing shows that the new API adds around 3kB to the kernel
+ * and save between 0 and 5kB from a typical driver.
+ * Also, as all structures and data types are unchanged, the migration is
+ * quite straightforward (but tedious).
+ *
+ * ---
+ *
+ * The new driver API is defined below in this file. User space should
+ * not be aware of what's happening down there...
+ *
+ * A new kernel wrapper is in charge of validating the IOCTLs and calling
+ * the appropriate driver handler. This is implemented in :
+ *	# net/core/wireless.c
+ *
+ * The driver export the list of handlers in :
+ *	# include/linux/netdevice.h (one place)
+ *
+ * The new driver API is available for WIRELESS_EXT >= 13.
+ * Good luck with migration to the new API ;-)
+ */
+
+/* ---------------------- THE IMPLEMENTATION ---------------------- */
+/*
+ * Some of the choice I've made are pretty controversials. Defining an
+ * API is very much weighting compromises. This goes into some of the
+ * details and the thinking behind the implementation.
+ *
+ * Implementation goals :
+ * --------------------
+ * The implementation goals were as follow :
+ *	o Obvious : you should not need a PhD to understand what's happening,
+ *		the benefit is easier maintenance.
+ *	o Flexible : it should accommodate a wide variety of driver
+ *		implementations and be as flexible as the old API.
+ *	o Lean : it should be efficient memory wise to minimise the impact
+ *		on kernel footprint.
+ *	o Transparent to user space : the large number of user space
+ *		applications that use Wireless Extensions should not need
+ *		any modifications.
+ *
+ * Array of functions versus Struct of functions
+ * ---------------------------------------------
+ * 1) Having an array of functions allow the kernel code to access the
+ * handler in a single lookup, which is much more efficient (think hash
+ * table here).
+ * 2) The only drawback is that driver writer may put their handler in
+ * the wrong slot. This is trivial to test (I set the frequency, the
+ * bitrate changes). Once the handler is in the proper slot, it will be
+ * there forever, because the array is only extended at the end.
+ * 3) Backward/forward compatibility : adding new handler just require
+ * extending the array, so you can put newer driver in older kernel
+ * without having to patch the kernel code (and vice versa).
+ *
+ * All handler are of the same generic type
+ * ----------------------------------------
+ * That's a feature !!!
+ * 1) Having a generic handler allow to have generic code, which is more
+ * efficient. If each of the handler was individually typed I would need
+ * to add a big switch in the kernel (== more bloat). This solution is
+ * more scalable, adding new Wireless Extensions doesn't add new code.
+ * 2) You can use the same handler in different slots of the array. For
+ * hardware, it may be more efficient or logical to handle multiple
+ * Wireless Extensions with a single function, and the API allow you to
+ * do that. (An example would be a single record on the card to control
+ * both bitrate and frequency, the handler would read the old record,
+ * modify it according to info->cmd and rewrite it).
+ *
+ * Functions prototype uses union iwreq_data
+ * -----------------------------------------
+ * Some would have preferred functions defined this way :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev, 
+ *					  long rate, int auto)
+ * 1) The kernel code doesn't "validate" the content of iwreq_data, and
+ * can't do it (different hardware may have different notion of what a
+ * valid frequency is), so we don't pretend that we do it.
+ * 2) The above form is not extendable. If I want to add a flag (for
+ * example to distinguish setting max rate and basic rate), I would
+ * break the prototype. Using iwreq_data is more flexible.
+ * 3) Also, the above form is not generic (see above).
+ * 4) I don't expect driver developper using the wrong field of the
+ * union (Doh !), so static typechecking doesn't add much value.
+ * 5) Lastly, you can skip the union by doing :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev,
+ *					  struct iw_request_info *info,
+ *					  struct iw_param *rrq,
+ *					  char *extra)
+ * And then adding the handler in the array like this :
+ *        (iw_handler) mydriver_ioctl_setrate,             // SIOCSIWRATE
+ *
+ * Using functions and not a registry
+ * ----------------------------------
+ * Another implementation option would have been for every instance to
+ * define a registry (a struct containing all the Wireless Extensions)
+ * and only have a function to commit the registry to the hardware.
+ * 1) This approach can be emulated by the current code, but not
+ * vice versa.
+ * 2) Some drivers don't keep any configuration in the driver, for them
+ * adding such a registry would be a significant bloat.
+ * 3) The code to translate from Wireless Extension to native format is
+ * needed anyway, so it would not reduce significantely the amount of code.
+ * 4) The current approach only selectively translate Wireless Extensions
+ * to native format and only selectively set, whereas the registry approach
+ * would require to translate all WE and set all parameters for any single
+ * change.
+ * 5) For many Wireless Extensions, the GET operation return the current
+ * dynamic value, not the value that was set.
+ *
+ * This header is <net/iw_handler.h>
+ * ---------------------------------
+ * 1) This header is kernel space only and should not be exported to
+ * user space. Headers in "include/linux/" are exported, headers in
+ * "include/net/" are not.
+ *
+ * Mixed 32/64 bit issues
+ * ----------------------
+ * The Wireless Extensions are designed to be 64 bit clean, by using only
+ * datatypes with explicit storage size.
+ * There are some issues related to kernel and user space using different
+ * memory model, and in particular 64bit kernel with 32bit user space.
+ * The problem is related to struct iw_point, that contains a pointer
+ * that *may* need to be translated.
+ * This is quite messy. The new API doesn't solve this problem (it can't),
+ * but is a step in the right direction :
+ * 1) Meta data about each ioctl is easily available, so we know what type
+ * of translation is needed.
+ * 2) The move of data between kernel and user space is only done in a single
+ * place in the kernel, so adding specific hooks in there is possible.
+ * 3) In the long term, it allows to move away from using ioctl as the
+ * user space API.
+ *
+ * So many comments and so few code
+ * --------------------------------
+ * That's a feature. Comments won't bloat the resulting kernel binary.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/wireless.h>		/* IOCTL user space API */
+#include <linux/if_ether.h>
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know which version of the driver API is
+ * available. Hopefully, this will be pretty stable and no changes
+ * will be needed...
+ * I just plan to increment with each new version.
+ */
+#define IW_HANDLER_VERSION	8
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	- Move event definition in <linux/wireless.h>
+ *	- Add Wireless Event support :
+ *		o wireless_send_event() prototype
+ *		o iwe_stream_add_event/point() inline functions
+ * V3 to V4
+ * --------
+ *	- Reshuffle IW_HEADER_TYPE_XXX to map IW_PRIV_TYPE_XXX changes
+ *
+ * V4 to V5
+ * --------
+ *	- Add new spy support : struct iw_spy_data & prototypes
+ *
+ * V5 to V6
+ * --------
+ *	- Change the way we get to spy_data method for added safety
+ *	- Remove spy #ifdef, they are always on -> cleaner code
+ *	- Add IW_DESCR_FLAG_NOMAX flag for very large requests
+ *	- Start migrating get_wireless_stats to struct iw_handler_def
+ *
+ * V6 to V7
+ * --------
+ *	- Add struct ieee80211_device pointer in struct iw_public_data
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove spy_offset from struct iw_handler_def
+ *	- Add "check" version of event macros for ieee802.11 stack
+ *
+ * V7 to V8
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* Enhanced spy support available */
+#define IW_WIRELESS_SPY
+#define IW_WIRELESS_THRSPY
+
+/* Special error message for the driver to indicate that we
+ * should do a commit after return from the iw_handler */
+#define EIWCOMMIT	EINPROGRESS
+
+/* Flags available in struct iw_request_info */
+#define IW_REQUEST_FLAG_COMPAT	0x0001	/* Compat ioctl call */
+
+/* Type of headers we know about (basically union iwreq_data) */
+#define IW_HEADER_TYPE_NULL	0	/* Not available */
+#define IW_HEADER_TYPE_CHAR	2	/* char [IFNAMSIZ] */
+#define IW_HEADER_TYPE_UINT	4	/* __u32 */
+#define IW_HEADER_TYPE_FREQ	5	/* struct iw_freq */
+#define IW_HEADER_TYPE_ADDR	6	/* struct sockaddr */
+#define IW_HEADER_TYPE_POINT	8	/* struct iw_point */
+#define IW_HEADER_TYPE_PARAM	9	/* struct iw_param */
+#define IW_HEADER_TYPE_QUAL	10	/* struct iw_quality */
+
+/* Handling flags */
+/* Most are not implemented. I just use them as a reminder of some
+ * cool features we might need one day ;-) */
+#define IW_DESCR_FLAG_NONE	0x0000	/* Obvious */
+/* Wrapper level flags */
+#define IW_DESCR_FLAG_DUMP	0x0001	/* Not part of the dump command */
+#define IW_DESCR_FLAG_EVENT	0x0002	/* Generate an event on SET */
+#define IW_DESCR_FLAG_RESTRICT	0x0004	/* GET : request is ROOT only */
+				/* SET : Omit payload from generated iwevent */
+#define IW_DESCR_FLAG_NOMAX	0x0008	/* GET : no limit on request size */
+/* Driver level flags */
+#define IW_DESCR_FLAG_WAIT	0x0100	/* Wait for driver event */
+
+/****************************** TYPES ******************************/
+
+/* ----------------------- WIRELESS HANDLER ----------------------- */
+/*
+ * A wireless handler is just a standard function, that looks like the
+ * ioctl handler.
+ * We also define there how a handler list look like... As the Wireless
+ * Extension space is quite dense, we use a simple array, which is faster
+ * (that's the perfect hash table ;-).
+ */
+
+/*
+ * Meta data about the request passed to the iw_handler.
+ * Most handlers can safely ignore what's in there.
+ * The 'cmd' field might come handy if you want to use the same handler
+ * for multiple command...
+ * This struct is also my long term insurance. I can add new fields here
+ * without breaking the prototype of iw_handler...
+ */
+struct iw_request_info {
+	__u16		cmd;		/* Wireless Extension command */
+	__u16		flags;		/* More to come ;-) */
+};
+
+struct net_device;
+
+/*
+ * This is how a function handling a Wireless Extension should look
+ * like (both get and set, standard and private).
+ */
+typedef int (*iw_handler)(struct net_device *dev, struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+
+/*
+ * This define all the handler that the driver export.
+ * As you need only one per driver type, please use a static const
+ * shared by all driver instances... Same for the members...
+ * This will be linked from net_device in <linux/netdevice.h>
+ */
+struct iw_handler_def {
+
+	/* Array of handlers for standard ioctls
+	 * We will call dev->wireless_handlers->standard[ioctl - SIOCIWFIRST]
+	 */
+	const iw_handler *	standard;
+	/* Number of handlers defined (more precisely, index of the
+	 * last defined handler + 1) */
+	__u16			num_standard;
+
+#ifdef CONFIG_WEXT_PRIV
+	__u16			num_private;
+	/* Number of private arg description */
+	__u16			num_private_args;
+	/* Array of handlers for private ioctls
+	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
+	 */
+	const iw_handler *	private;
+
+	/* Arguments of private handler. This one is just a list, so you
+	 * can put it in any order you want and should not leave holes...
+	 * We will automatically export that to user space... */
+	const struct iw_priv_args *	private_args;
+#endif
+
+	/* New location of get_wireless_stats, to de-bloat struct net_device.
+	 * The old pointer in struct net_device will be gradually phased
+	 * out, and drivers are encouraged to use this one... */
+	struct iw_statistics*	(*get_wireless_stats)(struct net_device *dev);
+};
+
+/* ---------------------- IOCTL DESCRIPTION ---------------------- */
+/*
+ * One of the main goal of the new interface is to deal entirely with
+ * user space/kernel space memory move.
+ * For that, we need to know :
+ *	o if iwreq is a pointer or contain the full data
+ *	o what is the size of the data to copy
+ *
+ * For private IOCTLs, we use the same rules as used by iwpriv and
+ * defined in struct iw_priv_args.
+ *
+ * For standard IOCTLs, things are quite different and we need to
+ * use the structures below. Actually, this struct is also more
+ * efficient, but that's another story...
+ */
+
+/*
+ * Describe how a standard IOCTL looks like.
+ */
+struct iw_ioctl_description {
+	__u8	header_type;		/* NULL, iw_point or other */
+	__u8	token_type;		/* Future */
+	__u16	token_size;		/* Granularity of payload */
+	__u16	min_tokens;		/* Min acceptable token number */
+	__u16	max_tokens;		/* Max acceptable token number */
+	__u32	flags;			/* Special handling of the request */
+};
+
+/* Need to think of short header translation table. Later. */
+
+/* --------------------- ENHANCED SPY SUPPORT --------------------- */
+/*
+ * In the old days, the driver was handling spy support all by itself.
+ * Now, the driver can delegate this task to Wireless Extensions.
+ * It needs to include this struct in its private part and use the
+ * standard spy iw_handler.
+ */
+
+/*
+ * Instance specific spy data, i.e. addresses spied and quality for them.
+ */
+struct iw_spy_data {
+	/* --- Standard spy support --- */
+	int			spy_number;
+	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
+	struct iw_quality	spy_stat[IW_MAX_SPY];
+	/* --- Enhanced spy support (event) */
+	struct iw_quality	spy_thr_low;	/* Low threshold */
+	struct iw_quality	spy_thr_high;	/* High threshold */
+	u_char			spy_thr_under[IW_MAX_SPY];
+};
+
+/* --------------------- DEVICE WIRELESS DATA --------------------- */
+/*
+ * This is all the wireless data specific to a device instance that
+ * is managed by the core of Wireless Extensions or the 802.11 layer.
+ * We only keep pointer to those structures, so that a driver is free
+ * to share them between instances.
+ * This structure should be initialised before registering the device.
+ * Access to this data follow the same rules as any other struct net_device
+ * data (i.e. valid as long as struct net_device exist, same locking rules).
+ */
+/* Forward declaration */
+struct libipw_device;
+/* The struct */
+struct iw_public_data {
+	/* Driver enhanced spy support */
+	struct iw_spy_data *		spy_data;
+	/* Legacy structure managed by the ipw2x00-specific IEEE 802.11 layer */
+	struct libipw_device *		libipw;
+};
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Functions part of the Wireless Extensions (defined in net/core/wireless.c).
+ * Those may be called only within the kernel.
+ */
+
+/* First : function strictly used inside the kernel */
+
+/* Handle /proc/net/wireless, called in net/code/dev.c */
+int dev_get_wireless_info(char *buffer, char **start, off_t offset, int length);
+
+/* Second : functions that may be called by driver modules */
+
+/* Send a single event to user space */
+void wireless_send_event(struct net_device *dev, unsigned int cmd,
+			 union iwreq_data *wrqu, const char *extra);
+#ifdef CONFIG_WEXT_CORE
+/* flush all previous wext events - if work is done from netdev notifiers */
+void wireless_nlevent_flush(void);
+#else
+static inline void wireless_nlevent_flush(void) {}
+#endif
+
+/* We may need a function to send a stream of events to user space.
+ * More on that later... */
+
+/* Standard handler for SIOCSIWSPY */
+int iw_handler_set_spy(struct net_device *dev, struct iw_request_info *info,
+		       union iwreq_data *wrqu, char *extra);
+/* Standard handler for SIOCGIWSPY */
+int iw_handler_get_spy(struct net_device *dev, struct iw_request_info *info,
+		       union iwreq_data *wrqu, char *extra);
+/* Standard handler for SIOCSIWTHRSPY */
+int iw_handler_set_thrspy(struct net_device *dev, struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+/* Standard handler for SIOCGIWTHRSPY */
+int iw_handler_get_thrspy(struct net_device *dev, struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+/* Driver call to update spy records */
+void wireless_spy_update(struct net_device *dev, unsigned char *address,
+			 struct iw_quality *wstats);
+
+/************************* INLINE FUNTIONS *************************/
+/*
+ * Function that are so simple that it's more efficient inlining them
+ */
+
+static inline int iwe_stream_lcp_len(struct iw_request_info *info)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_LCP_LEN;
+#endif
+	return IW_EV_LCP_LEN;
+}
+
+static inline int iwe_stream_point_len(struct iw_request_info *info)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_POINT_LEN;
+#endif
+	return IW_EV_POINT_LEN;
+}
+
+static inline int iwe_stream_event_len_adjust(struct iw_request_info *info,
+					      int event_len)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT) {
+		event_len -= IW_EV_LCP_LEN;
+		event_len += IW_EV_COMPAT_LCP_LEN;
+	}
+#endif
+
+	return event_len;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an Wireless Event to a stream of events.
+ */
+char *iwe_stream_add_event(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, int event_len);
+
+static inline char *
+iwe_stream_add_event_check(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, int event_len)
+{
+	char *res = iwe_stream_add_event(info, stream, ends, iwe, event_len);
+
+	if (res == stream)
+		return ERR_PTR(-E2BIG);
+	return res;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an short Wireless Event containing a pointer to a
+ * stream of events.
+ */
+char *iwe_stream_add_point(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, char *extra);
+
+static inline char *
+iwe_stream_add_point_check(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, char *extra)
+{
+	char *res = iwe_stream_add_point(info, stream, ends, iwe, extra);
+
+	if (res == stream)
+		return ERR_PTR(-E2BIG);
+	return res;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add a value to a Wireless Event in a stream of events.
+ * Be careful, this one is tricky to use properly :
+ * At the first run, you need to have (value = event + IW_EV_LCP_LEN).
+ */
+char *iwe_stream_add_value(struct iw_request_info *info, char *event,
+			   char *value, char *ends, struct iw_event *iwe,
+			   int event_len);
+
+#endif	/* _IW_HANDLER_H */