Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 555 insertions, 0 deletions

diff --git a/include/net/nl802154.h b/include/net/nl802154.h
new file mode 100644
index 000000000..8cd9d141f
--- /dev/null
+++ b/include/net/nl802154.h
@@ -0,0 +1,555 @@
+#ifndef __NL802154_H
+#define __NL802154_H
+/*
+ * 802.15.4 netlink interface public header
+ *
+ * Copyright 2014 Alexander Aring <aar@pengutronix.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+
+#define NL802154_GENL_NAME "nl802154"
+
+enum nl802154_commands {
+/* don't change the order or add anything between, this is ABI! */
+/* currently we don't shipping this file via uapi, ignore the above one */
+	NL802154_CMD_UNSPEC,
+
+	NL802154_CMD_GET_WPAN_PHY,		/* can dump */
+	NL802154_CMD_SET_WPAN_PHY,
+	NL802154_CMD_NEW_WPAN_PHY,
+	NL802154_CMD_DEL_WPAN_PHY,
+
+	NL802154_CMD_GET_INTERFACE,		/* can dump */
+	NL802154_CMD_SET_INTERFACE,
+	NL802154_CMD_NEW_INTERFACE,
+	NL802154_CMD_DEL_INTERFACE,
+
+	NL802154_CMD_SET_CHANNEL,
+
+	NL802154_CMD_SET_PAN_ID,
+	NL802154_CMD_SET_SHORT_ADDR,
+
+	NL802154_CMD_SET_TX_POWER,
+	NL802154_CMD_SET_CCA_MODE,
+	NL802154_CMD_SET_CCA_ED_LEVEL,
+
+	NL802154_CMD_SET_MAX_FRAME_RETRIES,
+
+	NL802154_CMD_SET_BACKOFF_EXPONENT,
+	NL802154_CMD_SET_MAX_CSMA_BACKOFFS,
+
+	NL802154_CMD_SET_LBT_MODE,
+
+	NL802154_CMD_SET_ACKREQ_DEFAULT,
+
+	NL802154_CMD_SET_WPAN_PHY_NETNS,
+
+	NL802154_CMD_SET_SEC_PARAMS,
+	NL802154_CMD_GET_SEC_KEY,		/* can dump */
+	NL802154_CMD_NEW_SEC_KEY,
+	NL802154_CMD_DEL_SEC_KEY,
+	NL802154_CMD_GET_SEC_DEV,		/* can dump */
+	NL802154_CMD_NEW_SEC_DEV,
+	NL802154_CMD_DEL_SEC_DEV,
+	NL802154_CMD_GET_SEC_DEVKEY,		/* can dump */
+	NL802154_CMD_NEW_SEC_DEVKEY,
+	NL802154_CMD_DEL_SEC_DEVKEY,
+	NL802154_CMD_GET_SEC_LEVEL,		/* can dump */
+	NL802154_CMD_NEW_SEC_LEVEL,
+	NL802154_CMD_DEL_SEC_LEVEL,
+
+	NL802154_CMD_SCAN_EVENT,
+	NL802154_CMD_TRIGGER_SCAN,
+	NL802154_CMD_ABORT_SCAN,
+	NL802154_CMD_SCAN_DONE,
+	NL802154_CMD_SEND_BEACONS,
+	NL802154_CMD_STOP_BEACONS,
+
+	/* add new commands above here */
+
+	/* used to define NL802154_CMD_MAX below */
+	__NL802154_CMD_AFTER_LAST,
+	NL802154_CMD_MAX = __NL802154_CMD_AFTER_LAST - 1
+};
+
+enum nl802154_attrs {
+/* don't change the order or add anything between, this is ABI! */
+/* currently we don't shipping this file via uapi, ignore the above one */
+	NL802154_ATTR_UNSPEC,
+
+	NL802154_ATTR_WPAN_PHY,
+	NL802154_ATTR_WPAN_PHY_NAME,
+
+	NL802154_ATTR_IFINDEX,
+	NL802154_ATTR_IFNAME,
+	NL802154_ATTR_IFTYPE,
+
+	NL802154_ATTR_WPAN_DEV,
+
+	NL802154_ATTR_PAGE,
+	NL802154_ATTR_CHANNEL,
+
+	NL802154_ATTR_PAN_ID,
+	NL802154_ATTR_SHORT_ADDR,
+
+	NL802154_ATTR_TX_POWER,
+
+	NL802154_ATTR_CCA_MODE,
+	NL802154_ATTR_CCA_OPT,
+	NL802154_ATTR_CCA_ED_LEVEL,
+
+	NL802154_ATTR_MAX_FRAME_RETRIES,
+
+	NL802154_ATTR_MAX_BE,
+	NL802154_ATTR_MIN_BE,
+	NL802154_ATTR_MAX_CSMA_BACKOFFS,
+
+	NL802154_ATTR_LBT_MODE,
+
+	NL802154_ATTR_GENERATION,
+
+	NL802154_ATTR_CHANNELS_SUPPORTED,
+	NL802154_ATTR_SUPPORTED_CHANNEL,
+
+	NL802154_ATTR_EXTENDED_ADDR,
+
+	NL802154_ATTR_WPAN_PHY_CAPS,
+
+	NL802154_ATTR_SUPPORTED_COMMANDS,
+
+	NL802154_ATTR_ACKREQ_DEFAULT,
+
+	NL802154_ATTR_PAD,
+
+	NL802154_ATTR_PID,
+	NL802154_ATTR_NETNS_FD,
+
+	NL802154_ATTR_COORDINATOR,
+	NL802154_ATTR_SCAN_TYPE,
+	NL802154_ATTR_SCAN_FLAGS,
+	NL802154_ATTR_SCAN_CHANNELS,
+	NL802154_ATTR_SCAN_PREAMBLE_CODES,
+	NL802154_ATTR_SCAN_MEAN_PRF,
+	NL802154_ATTR_SCAN_DURATION,
+	NL802154_ATTR_SCAN_DONE_REASON,
+	NL802154_ATTR_BEACON_INTERVAL,
+
+	/* add attributes here, update the policy in nl802154.c */
+
+#ifdef CONFIG_IEEE802154_NL802154_EXPERIMENTAL
+	NL802154_ATTR_SEC_ENABLED,
+	NL802154_ATTR_SEC_OUT_LEVEL,
+	NL802154_ATTR_SEC_OUT_KEY_ID,
+	NL802154_ATTR_SEC_FRAME_COUNTER,
+
+	NL802154_ATTR_SEC_LEVEL,
+	NL802154_ATTR_SEC_DEVICE,
+	NL802154_ATTR_SEC_DEVKEY,
+	NL802154_ATTR_SEC_KEY,
+#endif /* CONFIG_IEEE802154_NL802154_EXPERIMENTAL */
+
+	__NL802154_ATTR_AFTER_LAST,
+	NL802154_ATTR_MAX = __NL802154_ATTR_AFTER_LAST - 1
+};
+
+enum nl802154_iftype {
+	NL802154_IFTYPE_UNSPEC = (~(__u32)0),
+
+	NL802154_IFTYPE_NODE = 0,
+	NL802154_IFTYPE_MONITOR,
+	NL802154_IFTYPE_COORD,
+
+	/* keep last */
+	NUM_NL802154_IFTYPES,
+	NL802154_IFTYPE_MAX = NUM_NL802154_IFTYPES - 1
+};
+
+/**
+ * enum nl802154_wpan_phy_capability_attr - wpan phy capability attributes
+ *
+ * @__NL802154_CAP_ATTR_INVALID: attribute number 0 is reserved
+ * @NL802154_CAP_ATTR_CHANNELS: a nested attribute for nl802154_channel_attr
+ * @NL802154_CAP_ATTR_TX_POWERS: a nested attribute for
+ *	nl802154_wpan_phy_tx_power
+ * @NL802154_CAP_ATTR_MIN_CCA_ED_LEVEL: minimum value for cca_ed_level
+ * @NL802154_CAP_ATTR_MAX_CCA_ED_LEVEL: maxmimum value for cca_ed_level
+ * @NL802154_CAP_ATTR_CCA_MODES: nl802154_cca_modes flags
+ * @NL802154_CAP_ATTR_CCA_OPTS: nl802154_cca_opts flags
+ * @NL802154_CAP_ATTR_MIN_MINBE: minimum of minbe value
+ * @NL802154_CAP_ATTR_MAX_MINBE: maximum of minbe value
+ * @NL802154_CAP_ATTR_MIN_MAXBE: minimum of maxbe value
+ * @NL802154_CAP_ATTR_MAX_MINBE: maximum of maxbe value
+ * @NL802154_CAP_ATTR_MIN_CSMA_BACKOFFS: minimum of csma backoff value
+ * @NL802154_CAP_ATTR_MAX_CSMA_BACKOFFS: maximum of csma backoffs value
+ * @NL802154_CAP_ATTR_MIN_FRAME_RETRIES: minimum of frame retries value
+ * @NL802154_CAP_ATTR_MAX_FRAME_RETRIES: maximum of frame retries value
+ * @NL802154_CAP_ATTR_IFTYPES: nl802154_iftype flags
+ * @NL802154_CAP_ATTR_LBT: nl802154_supported_bool_states flags
+ * @NL802154_CAP_ATTR_MAX: highest cap attribute currently defined
+ * @__NL802154_CAP_ATTR_AFTER_LAST: internal use
+ */
+enum nl802154_wpan_phy_capability_attr {
+	__NL802154_CAP_ATTR_INVALID,
+
+	NL802154_CAP_ATTR_IFTYPES,
+
+	NL802154_CAP_ATTR_CHANNELS,
+	NL802154_CAP_ATTR_TX_POWERS,
+
+	NL802154_CAP_ATTR_CCA_ED_LEVELS,
+	NL802154_CAP_ATTR_CCA_MODES,
+	NL802154_CAP_ATTR_CCA_OPTS,
+
+	NL802154_CAP_ATTR_MIN_MINBE,
+	NL802154_CAP_ATTR_MAX_MINBE,
+
+	NL802154_CAP_ATTR_MIN_MAXBE,
+	NL802154_CAP_ATTR_MAX_MAXBE,
+
+	NL802154_CAP_ATTR_MIN_CSMA_BACKOFFS,
+	NL802154_CAP_ATTR_MAX_CSMA_BACKOFFS,
+
+	NL802154_CAP_ATTR_MIN_FRAME_RETRIES,
+	NL802154_CAP_ATTR_MAX_FRAME_RETRIES,
+
+	NL802154_CAP_ATTR_LBT,
+
+	/* keep last */
+	__NL802154_CAP_ATTR_AFTER_LAST,
+	NL802154_CAP_ATTR_MAX = __NL802154_CAP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl802154_coord - Netlink attributes for a coord
+ *
+ * @__NL802154_COORD_INVALID: invalid
+ * @NL802154_COORD_PANID: PANID of the coordinator (2 bytes)
+ * @NL802154_COORD_ADDR: coordinator address, (8 bytes or 2 bytes)
+ * @NL802154_COORD_CHANNEL: channel number, related to @NL802154_COORD_PAGE (u8)
+ * @NL802154_COORD_PAGE: channel page, related to @NL802154_COORD_CHANNEL (u8)
+ * @NL802154_COORD_PREAMBLE_CODE: Preamble code used when the beacon was received,
+ *	this is PHY dependent and optional (u8)
+ * @NL802154_COORD_MEAN_PRF: Mean PRF used when the beacon was received,
+ *     this is PHY dependent and optional (u8)
+ * @NL802154_COORD_SUPERFRAME_SPEC: superframe specification of the PAN (u16)
+ * @NL802154_COORD_LINK_QUALITY: signal quality of beacon in unspecified units,
+ *	scaled to 0..255 (u8)
+ * @NL802154_COORD_GTS_PERMIT: set to true if GTS is permitted on this PAN
+ * @NL802154_COORD_PAYLOAD_DATA: binary data containing the raw data from the
+ *	frame payload, (only if beacon or probe response had data)
+ * @NL802154_COORD_PAD: attribute used for padding for 64-bit alignment
+ * @NL802154_COORD_MAX: highest coordinator attribute
+ */
+enum nl802154_coord {
+	__NL802154_COORD_INVALID,
+	NL802154_COORD_PANID,
+	NL802154_COORD_ADDR,
+	NL802154_COORD_CHANNEL,
+	NL802154_COORD_PAGE,
+	NL802154_COORD_PREAMBLE_CODE,
+	NL802154_COORD_MEAN_PRF,
+	NL802154_COORD_SUPERFRAME_SPEC,
+	NL802154_COORD_LINK_QUALITY,
+	NL802154_COORD_GTS_PERMIT,
+	NL802154_COORD_PAYLOAD_DATA,
+	NL802154_COORD_PAD,
+
+	/* keep last */
+	NL802154_COORD_MAX,
+};
+
+/**
+ * enum nl802154_scan_types - Scan types
+ *
+ * @__NL802154_SCAN_INVALID: scan type number 0 is reserved
+ * @NL802154_SCAN_ED: An ED scan allows a device to obtain a measure of the peak
+ *	energy in each requested channel
+ * @NL802154_SCAN_ACTIVE: Locate any coordinator transmitting Beacon frames using
+ *	a Beacon Request command
+ * @NL802154_SCAN_PASSIVE: Locate any coordinator transmitting Beacon frames
+ * @NL802154_SCAN_ORPHAN: Relocate coordinator following a loss of synchronisation
+ * @NL802154_SCAN_ENHANCED_ACTIVE: Same as Active using Enhanced Beacon Request
+ *	command instead of Beacon Request command
+ * @NL802154_SCAN_RIT_PASSIVE: Passive scan for RIT Data Request command frames
+ *	instead of Beacon frames
+ * @NL802154_SCAN_ATTR_MAX: Maximum SCAN attribute number
+ */
+enum nl802154_scan_types {
+	__NL802154_SCAN_INVALID,
+	NL802154_SCAN_ED,
+	NL802154_SCAN_ACTIVE,
+	NL802154_SCAN_PASSIVE,
+	NL802154_SCAN_ORPHAN,
+	NL802154_SCAN_ENHANCED_ACTIVE,
+	NL802154_SCAN_RIT_PASSIVE,
+
+	/* keep last */
+	NL802154_SCAN_ATTR_MAX,
+};
+
+/**
+ * enum nl802154_scan_done_reasons - End of scan reasons
+ *
+ * @__NL802154_SCAN_DONE_REASON_INVALID: scan done reason number 0 is reserved.
+ * @NL802154_SCAN_DONE_REASON_FINISHED: The scan just finished naturally after
+ *	going through all the requested and possible (complex) channels.
+ * @NL802154_SCAN_DONE_REASON_ABORTED: The scan was aborted upon user request.
+ *	a Beacon Request command
+ * @NL802154_SCAN_DONE_REASON_MAX: Maximum scan done reason attribute number.
+ */
+enum nl802154_scan_done_reasons {
+	__NL802154_SCAN_DONE_REASON_INVALID,
+	NL802154_SCAN_DONE_REASON_FINISHED,
+	NL802154_SCAN_DONE_REASON_ABORTED,
+
+	/* keep last */
+	NL802154_SCAN_DONE_REASON_MAX,
+};
+
+/**
+ * enum nl802154_cca_modes - cca modes
+ *
+ * @__NL802154_CCA_INVALID: cca mode number 0 is reserved
+ * @NL802154_CCA_ENERGY: Energy above threshold
+ * @NL802154_CCA_CARRIER: Carrier sense only
+ * @NL802154_CCA_ENERGY_CARRIER: Carrier sense with energy above threshold
+ * @NL802154_CCA_ALOHA: CCA shall always report an idle medium
+ * @NL802154_CCA_UWB_SHR: UWB preamble sense based on the SHR of a frame
+ * @NL802154_CCA_UWB_MULTIPLEXED: UWB preamble sense based on the packet with
+ *	the multiplexed preamble
+ * @__NL802154_CCA_ATTR_AFTER_LAST: Internal
+ * @NL802154_CCA_ATTR_MAX: Maximum CCA attribute number
+ */
+enum nl802154_cca_modes {
+	__NL802154_CCA_INVALID,
+	NL802154_CCA_ENERGY,
+	NL802154_CCA_CARRIER,
+	NL802154_CCA_ENERGY_CARRIER,
+	NL802154_CCA_ALOHA,
+	NL802154_CCA_UWB_SHR,
+	NL802154_CCA_UWB_MULTIPLEXED,
+
+	/* keep last */
+	__NL802154_CCA_ATTR_AFTER_LAST,
+	NL802154_CCA_ATTR_MAX = __NL802154_CCA_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl802154_cca_opts - additional options for cca modes
+ *
+ * @NL802154_CCA_OPT_ENERGY_CARRIER_OR: NL802154_CCA_ENERGY_CARRIER with OR
+ * @NL802154_CCA_OPT_ENERGY_CARRIER_AND: NL802154_CCA_ENERGY_CARRIER with AND
+ */
+enum nl802154_cca_opts {
+	NL802154_CCA_OPT_ENERGY_CARRIER_AND,
+	NL802154_CCA_OPT_ENERGY_CARRIER_OR,
+
+	/* keep last */
+	__NL802154_CCA_OPT_ATTR_AFTER_LAST,
+	NL802154_CCA_OPT_ATTR_MAX = __NL802154_CCA_OPT_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl802154_supported_bool_states - bool states for bool capability entry
+ *
+ * @NL802154_SUPPORTED_BOOL_FALSE: indicates to set false
+ * @NL802154_SUPPORTED_BOOL_TRUE: indicates to set true
+ * @__NL802154_SUPPORTED_BOOL_INVALD: reserved
+ * @NL802154_SUPPORTED_BOOL_BOTH: indicates to set true and false
+ * @__NL802154_SUPPORTED_BOOL_AFTER_LAST: Internal
+ * @NL802154_SUPPORTED_BOOL_MAX: highest value for bool states
+ */
+enum nl802154_supported_bool_states {
+	NL802154_SUPPORTED_BOOL_FALSE,
+	NL802154_SUPPORTED_BOOL_TRUE,
+	/* to handle them in a mask */
+	__NL802154_SUPPORTED_BOOL_INVALD,
+	NL802154_SUPPORTED_BOOL_BOTH,
+
+	/* keep last */
+	__NL802154_SUPPORTED_BOOL_AFTER_LAST,
+	NL802154_SUPPORTED_BOOL_MAX = __NL802154_SUPPORTED_BOOL_AFTER_LAST - 1
+};
+
+#ifdef CONFIG_IEEE802154_NL802154_EXPERIMENTAL
+
+enum nl802154_dev_addr_modes {
+	NL802154_DEV_ADDR_NONE,
+	__NL802154_DEV_ADDR_INVALID,
+	NL802154_DEV_ADDR_SHORT,
+	NL802154_DEV_ADDR_EXTENDED,
+
+	/* keep last */
+	__NL802154_DEV_ADDR_AFTER_LAST,
+	NL802154_DEV_ADDR_MAX = __NL802154_DEV_ADDR_AFTER_LAST - 1
+};
+
+enum nl802154_dev_addr_attrs {
+	NL802154_DEV_ADDR_ATTR_UNSPEC,
+
+	NL802154_DEV_ADDR_ATTR_PAN_ID,
+	NL802154_DEV_ADDR_ATTR_MODE,
+	NL802154_DEV_ADDR_ATTR_SHORT,
+	NL802154_DEV_ADDR_ATTR_EXTENDED,
+	NL802154_DEV_ADDR_ATTR_PAD,
+
+	/* keep last */
+	__NL802154_DEV_ADDR_ATTR_AFTER_LAST,
+	NL802154_DEV_ADDR_ATTR_MAX = __NL802154_DEV_ADDR_ATTR_AFTER_LAST - 1
+};
+
+enum nl802154_key_id_modes {
+	NL802154_KEY_ID_MODE_IMPLICIT,
+	NL802154_KEY_ID_MODE_INDEX,
+	NL802154_KEY_ID_MODE_INDEX_SHORT,
+	NL802154_KEY_ID_MODE_INDEX_EXTENDED,
+
+	/* keep last */
+	__NL802154_KEY_ID_MODE_AFTER_LAST,
+	NL802154_KEY_ID_MODE_MAX = __NL802154_KEY_ID_MODE_AFTER_LAST - 1
+};
+
+enum nl802154_key_id_attrs {
+	NL802154_KEY_ID_ATTR_UNSPEC,
+
+	NL802154_KEY_ID_ATTR_MODE,
+	NL802154_KEY_ID_ATTR_INDEX,
+	NL802154_KEY_ID_ATTR_IMPLICIT,
+	NL802154_KEY_ID_ATTR_SOURCE_SHORT,
+	NL802154_KEY_ID_ATTR_SOURCE_EXTENDED,
+	NL802154_KEY_ID_ATTR_PAD,
+
+	/* keep last */
+	__NL802154_KEY_ID_ATTR_AFTER_LAST,
+	NL802154_KEY_ID_ATTR_MAX = __NL802154_KEY_ID_ATTR_AFTER_LAST - 1
+};
+
+enum nl802154_seclevels {
+	NL802154_SECLEVEL_NONE,
+	NL802154_SECLEVEL_MIC32,
+	NL802154_SECLEVEL_MIC64,
+	NL802154_SECLEVEL_MIC128,
+	NL802154_SECLEVEL_ENC,
+	NL802154_SECLEVEL_ENC_MIC32,
+	NL802154_SECLEVEL_ENC_MIC64,
+	NL802154_SECLEVEL_ENC_MIC128,
+
+	/* keep last */
+	__NL802154_SECLEVEL_AFTER_LAST,
+	NL802154_SECLEVEL_MAX = __NL802154_SECLEVEL_AFTER_LAST - 1
+};
+
+enum nl802154_frames {
+	NL802154_FRAME_BEACON,
+	NL802154_FRAME_DATA,
+	NL802154_FRAME_ACK,
+	NL802154_FRAME_CMD,
+
+	/* keep last */
+	__NL802154_FRAME_AFTER_LAST,
+	NL802154_FRAME_MAX = __NL802154_FRAME_AFTER_LAST - 1
+};
+
+enum nl802154_cmd_frames {
+	__NL802154_CMD_FRAME_INVALID,
+	NL802154_CMD_FRAME_ASSOC_REQUEST,
+	NL802154_CMD_FRAME_ASSOC_RESPONSE,
+	NL802154_CMD_FRAME_DISASSOC_NOTIFY,
+	NL802154_CMD_FRAME_DATA_REQUEST,
+	NL802154_CMD_FRAME_PAN_ID_CONFLICT_NOTIFY,
+	NL802154_CMD_FRAME_ORPHAN_NOTIFY,
+	NL802154_CMD_FRAME_BEACON_REQUEST,
+	NL802154_CMD_FRAME_COORD_REALIGNMENT,
+	NL802154_CMD_FRAME_GTS_REQUEST,
+
+	/* keep last */
+	__NL802154_CMD_FRAME_AFTER_LAST,
+	NL802154_CMD_FRAME_MAX = __NL802154_CMD_FRAME_AFTER_LAST - 1
+};
+
+enum nl802154_seclevel_attrs {
+	NL802154_SECLEVEL_ATTR_UNSPEC,
+
+	NL802154_SECLEVEL_ATTR_LEVELS,
+	NL802154_SECLEVEL_ATTR_FRAME,
+	NL802154_SECLEVEL_ATTR_CMD_FRAME,
+	NL802154_SECLEVEL_ATTR_DEV_OVERRIDE,
+
+	/* keep last */
+	__NL802154_SECLEVEL_ATTR_AFTER_LAST,
+	NL802154_SECLEVEL_ATTR_MAX = __NL802154_SECLEVEL_ATTR_AFTER_LAST - 1
+};
+
+/* TODO what is this? couldn't find in mib */
+enum {
+	NL802154_DEVKEY_IGNORE,
+	NL802154_DEVKEY_RESTRICT,
+	NL802154_DEVKEY_RECORD,
+
+	/* keep last */
+	__NL802154_DEVKEY_AFTER_LAST,
+	NL802154_DEVKEY_MAX = __NL802154_DEVKEY_AFTER_LAST - 1
+};
+
+enum nl802154_dev {
+	NL802154_DEV_ATTR_UNSPEC,
+
+	NL802154_DEV_ATTR_FRAME_COUNTER,
+	NL802154_DEV_ATTR_PAN_ID,
+	NL802154_DEV_ATTR_SHORT_ADDR,
+	NL802154_DEV_ATTR_EXTENDED_ADDR,
+	NL802154_DEV_ATTR_SECLEVEL_EXEMPT,
+	NL802154_DEV_ATTR_KEY_MODE,
+	NL802154_DEV_ATTR_PAD,
+
+	/* keep last */
+	__NL802154_DEV_ATTR_AFTER_LAST,
+	NL802154_DEV_ATTR_MAX = __NL802154_DEV_ATTR_AFTER_LAST - 1
+};
+
+enum nl802154_devkey {
+	NL802154_DEVKEY_ATTR_UNSPEC,
+
+	NL802154_DEVKEY_ATTR_FRAME_COUNTER,
+	NL802154_DEVKEY_ATTR_EXTENDED_ADDR,
+	NL802154_DEVKEY_ATTR_ID,
+	NL802154_DEVKEY_ATTR_PAD,
+
+	/* keep last */
+	__NL802154_DEVKEY_ATTR_AFTER_LAST,
+	NL802154_DEVKEY_ATTR_MAX = __NL802154_DEVKEY_ATTR_AFTER_LAST - 1
+};
+
+enum nl802154_key {
+	NL802154_KEY_ATTR_UNSPEC,
+
+	NL802154_KEY_ATTR_ID,
+	NL802154_KEY_ATTR_USAGE_FRAMES,
+	NL802154_KEY_ATTR_USAGE_CMDS,
+	NL802154_KEY_ATTR_BYTES,
+
+	/* keep last */
+	__NL802154_KEY_ATTR_AFTER_LAST,
+	NL802154_KEY_ATTR_MAX = __NL802154_KEY_ATTR_AFTER_LAST - 1
+};
+
+#define NL802154_KEY_SIZE		16
+#define NL802154_CMD_FRAME_NR_IDS	256
+
+#endif /* CONFIG_IEEE802154_NL802154_EXPERIMENTAL */
+
+#endif /* __NL802154_H */