Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 310 insertions, 0 deletions

diff --git a/include/net/nsh.h b/include/net/nsh.h
new file mode 100644
index 000000000..350b1ad11
--- /dev/null
+++ b/include/net/nsh.h
@@ -0,0 +1,310 @@
+#ifndef __NET_NSH_H
+#define __NET_NSH_H 1
+
+#include <linux/skbuff.h>
+
+/*
+ * Network Service Header:
+ *  0                   1                   2                   3
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |Ver|O|U|    TTL    |   Length  |U|U|U|U|MD Type| Next Protocol |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |          Service Path Identifier (SPI)        | Service Index |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |                                                               |
+ * ~               Mandatory/Optional Context Headers              ~
+ * |                                                               |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Version: The version field is used to ensure backward compatibility
+ * going forward with future NSH specification updates.  It MUST be set
+ * to 0x0 by the sender, in this first revision of NSH.  Given the
+ * widespread implementation of existing hardware that uses the first
+ * nibble after an MPLS label stack for ECMP decision processing, this
+ * document reserves version 01b and this value MUST NOT be used in
+ * future versions of the protocol.  Please see [RFC7325] for further
+ * discussion of MPLS-related forwarding requirements.
+ *
+ * O bit: Setting this bit indicates an Operations, Administration, and
+ * Maintenance (OAM) packet.  The actual format and processing of SFC
+ * OAM packets is outside the scope of this specification (see for
+ * example [I-D.ietf-sfc-oam-framework] for one approach).
+ *
+ * The O bit MUST be set for OAM packets and MUST NOT be set for non-OAM
+ * packets.  The O bit MUST NOT be modified along the SFP.
+ *
+ * SF/SFF/SFC Proxy/Classifier implementations that do not support SFC
+ * OAM procedures SHOULD discard packets with O bit set, but MAY support
+ * a configurable parameter to enable forwarding received SFC OAM
+ * packets unmodified to the next element in the chain.  Forwarding OAM
+ * packets unmodified by SFC elements that do not support SFC OAM
+ * procedures may be acceptable for a subset of OAM functions, but can
+ * result in unexpected outcomes for others, thus it is recommended to
+ * analyze the impact of forwarding an OAM packet for all OAM functions
+ * prior to enabling this behavior.  The configurable parameter MUST be
+ * disabled by default.
+ *
+ * TTL: Indicates the maximum SFF hops for an SFP.  This field is used
+ * for service plane loop detection.  The initial TTL value SHOULD be
+ * configurable via the control plane; the configured initial value can
+ * be specific to one or more SFPs.  If no initial value is explicitly
+ * provided, the default initial TTL value of 63 MUST be used.  Each SFF
+ * involved in forwarding an NSH packet MUST decrement the TTL value by
+ * 1 prior to NSH forwarding lookup.  Decrementing by 1 from an incoming
+ * value of 0 shall result in a TTL value of 63.  The packet MUST NOT be
+ * forwarded if TTL is, after decrement, 0.
+ *
+ * All other flag fields, marked U, are unassigned and available for
+ * future use, see Section 11.2.1.  Unassigned bits MUST be set to zero
+ * upon origination, and MUST be ignored and preserved unmodified by
+ * other NSH supporting elements.  Elements which do not understand the
+ * meaning of any of these bits MUST NOT modify their actions based on
+ * those unknown bits.
+ *
+ * Length: The total length, in 4-byte words, of NSH including the Base
+ * Header, the Service Path Header, the Fixed Length Context Header or
+ * Variable Length Context Header(s).  The length MUST be 0x6 for MD
+ * Type equal to 0x1, and MUST be 0x2 or greater for MD Type equal to
+ * 0x2.  The length of the NSH header MUST be an integer multiple of 4
+ * bytes, thus variable length metadata is always padded out to a
+ * multiple of 4 bytes.
+ *
+ * MD Type: Indicates the format of NSH beyond the mandatory Base Header
+ * and the Service Path Header.  MD Type defines the format of the
+ * metadata being carried.
+ *
+ * 0x0 - This is a reserved value.  Implementations SHOULD silently
+ * discard packets with MD Type 0x0.
+ *
+ * 0x1 - This indicates that the format of the header includes a fixed
+ * length Context Header (see Figure 4 below).
+ *
+ * 0x2 - This does not mandate any headers beyond the Base Header and
+ * Service Path Header, but may contain optional variable length Context
+ * Header(s).  The semantics of the variable length Context Header(s)
+ * are not defined in this document.  The format of the optional
+ * variable length Context Headers is provided in Section 2.5.1.
+ *
+ * 0xF - This value is reserved for experimentation and testing, as per
+ * [RFC3692].  Implementations not explicitly configured to be part of
+ * an experiment SHOULD silently discard packets with MD Type 0xF.
+ *
+ * Next Protocol: indicates the protocol type of the encapsulated data.
+ * NSH does not alter the inner payload, and the semantics on the inner
+ * protocol remain unchanged due to NSH service function chaining.
+ * Please see the IANA Considerations section below, Section 11.2.5.
+ *
+ * This document defines the following Next Protocol values:
+ *
+ * 0x1: IPv4
+ * 0x2: IPv6
+ * 0x3: Ethernet
+ * 0x4: NSH
+ * 0x5: MPLS
+ * 0xFE: Experiment 1
+ * 0xFF: Experiment 2
+ *
+ * Packets with Next Protocol values not supported SHOULD be silently
+ * dropped by default, although an implementation MAY provide a
+ * configuration parameter to forward them.  Additionally, an
+ * implementation not explicitly configured for a specific experiment
+ * [RFC3692] SHOULD silently drop packets with Next Protocol values 0xFE
+ * and 0xFF.
+ *
+ * Service Path Identifier (SPI): Identifies a service path.
+ * Participating nodes MUST use this identifier for Service Function
+ * Path selection.  The initial classifier MUST set the appropriate SPI
+ * for a given classification result.
+ *
+ * Service Index (SI): Provides location within the SFP.  The initial
+ * classifier for a given SFP SHOULD set the SI to 255, however the
+ * control plane MAY configure the initial value of SI as appropriate
+ * (i.e., taking into account the length of the service function path).
+ * The Service Index MUST be decremented by a value of 1 by Service
+ * Functions or by SFC Proxy nodes after performing required services
+ * and the new decremented SI value MUST be used in the egress packet's
+ * NSH.  The initial Classifier MUST send the packet to the first SFF in
+ * the identified SFP for forwarding along an SFP.  If re-classification
+ * occurs, and that re-classification results in a new SPI, the
+ * (re)classifier is, in effect, the initial classifier for the
+ * resultant SPI.
+ *
+ * The SI is used in conjunction the with Service Path Identifier for
+ * Service Function Path Selection and for determining the next SFF/SF
+ * in the path.  The SI is also valuable when troubleshooting or
+ * reporting service paths.  Additionally, while the TTL field is the
+ * main mechanism for service plane loop detection, the SI can also be
+ * used for detecting service plane loops.
+ *
+ * When the Base Header specifies MD Type = 0x1, a Fixed Length Context
+ * Header (16-bytes) MUST be present immediately following the Service
+ * Path Header. The value of a Fixed Length Context
+ * Header that carries no metadata MUST be set to zero.
+ *
+ * When the base header specifies MD Type = 0x2, zero or more Variable
+ * Length Context Headers MAY be added, immediately following the
+ * Service Path Header (see Figure 5).  Therefore, Length = 0x2,
+ * indicates that only the Base Header followed by the Service Path
+ * Header are present.  The optional Variable Length Context Headers
+ * MUST be of an integer number of 4-bytes.  The base header Length
+ * field MUST be used to determine the offset to locate the original
+ * packet or frame for SFC nodes that require access to that
+ * information.
+ *
+ * The format of the optional variable length Context Headers
+ *
+ *  0                   1                   2                   3
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |          Metadata Class       |      Type     |U|    Length   |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |                      Variable Metadata                        |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Metadata Class (MD Class): Defines the scope of the 'Type' field to
+ * provide a hierarchical namespace.  The IANA Considerations
+ * Section 11.2.4 defines how the MD Class values can be allocated to
+ * standards bodies, vendors, and others.
+ *
+ * Type: Indicates the explicit type of metadata being carried.  The
+ * definition of the Type is the responsibility of the MD Class owner.
+ *
+ * Unassigned bit: One unassigned bit is available for future use. This
+ * bit MUST NOT be set, and MUST be ignored on receipt.
+ *
+ * Length: Indicates the length of the variable metadata, in bytes.  In
+ * case the metadata length is not an integer number of 4-byte words,
+ * the sender MUST add pad bytes immediately following the last metadata
+ * byte to extend the metadata to an integer number of 4-byte words.
+ * The receiver MUST round up the length field to the nearest 4-byte
+ * word boundary, to locate and process the next field in the packet.
+ * The receiver MUST access only those bytes in the metadata indicated
+ * by the length field (i.e., actual number of bytes) and MUST ignore
+ * the remaining bytes up to the nearest 4-byte word boundary.  The
+ * Length may be 0 or greater.
+ *
+ * A value of 0 denotes a Context Header without a Variable Metadata
+ * field.
+ *
+ * [0] https://datatracker.ietf.org/doc/draft-ietf-sfc-nsh/
+ */
+
+/**
+ * struct nsh_md1_ctx - Keeps track of NSH context data
+ * @nshc<1-4>: NSH Contexts.
+ */
+struct nsh_md1_ctx {
+	__be32 context[4];
+};
+
+struct nsh_md2_tlv {
+	__be16 md_class;
+	u8 type;
+	u8 length;
+	u8 md_value[];
+};
+
+struct nshhdr {
+	__be16 ver_flags_ttl_len;
+	u8 mdtype;
+	u8 np;
+	__be32 path_hdr;
+	union {
+	    struct nsh_md1_ctx md1;
+	    struct nsh_md2_tlv md2;
+	};
+};
+
+/* Masking NSH header fields. */
+#define NSH_VER_MASK       0xc000
+#define NSH_VER_SHIFT      14
+#define NSH_FLAGS_MASK     0x3000
+#define NSH_FLAGS_SHIFT    12
+#define NSH_TTL_MASK       0x0fc0
+#define NSH_TTL_SHIFT      6
+#define NSH_LEN_MASK       0x003f
+#define NSH_LEN_SHIFT      0
+
+#define NSH_MDTYPE_MASK    0x0f
+#define NSH_MDTYPE_SHIFT   0
+
+#define NSH_SPI_MASK       0xffffff00
+#define NSH_SPI_SHIFT      8
+#define NSH_SI_MASK        0x000000ff
+#define NSH_SI_SHIFT       0
+
+/* MD Type Registry. */
+#define NSH_M_TYPE1     0x01
+#define NSH_M_TYPE2     0x02
+#define NSH_M_EXP1      0xFE
+#define NSH_M_EXP2      0xFF
+
+/* NSH Base Header Length */
+#define NSH_BASE_HDR_LEN  8
+
+/* NSH MD Type 1 header Length. */
+#define NSH_M_TYPE1_LEN   24
+
+/* NSH header maximum Length. */
+#define NSH_HDR_MAX_LEN 256
+
+/* NSH context headers maximum Length. */
+#define NSH_CTX_HDRS_MAX_LEN 248
+
+static inline struct nshhdr *nsh_hdr(struct sk_buff *skb)
+{
+	return (struct nshhdr *)skb_network_header(skb);
+}
+
+static inline u16 nsh_hdr_len(const struct nshhdr *nsh)
+{
+	return ((ntohs(nsh->ver_flags_ttl_len) & NSH_LEN_MASK)
+		>> NSH_LEN_SHIFT) << 2;
+}
+
+static inline u8 nsh_get_ver(const struct nshhdr *nsh)
+{
+	return (ntohs(nsh->ver_flags_ttl_len) & NSH_VER_MASK)
+		>> NSH_VER_SHIFT;
+}
+
+static inline u8 nsh_get_flags(const struct nshhdr *nsh)
+{
+	return (ntohs(nsh->ver_flags_ttl_len) & NSH_FLAGS_MASK)
+		>> NSH_FLAGS_SHIFT;
+}
+
+static inline u8 nsh_get_ttl(const struct nshhdr *nsh)
+{
+	return (ntohs(nsh->ver_flags_ttl_len) & NSH_TTL_MASK)
+		>> NSH_TTL_SHIFT;
+}
+
+static inline void __nsh_set_xflag(struct nshhdr *nsh, u16 xflag, u16 xmask)
+{
+	nsh->ver_flags_ttl_len
+		= (nsh->ver_flags_ttl_len & ~htons(xmask)) | htons(xflag);
+}
+
+static inline void nsh_set_flags_and_ttl(struct nshhdr *nsh, u8 flags, u8 ttl)
+{
+	__nsh_set_xflag(nsh, ((flags << NSH_FLAGS_SHIFT) & NSH_FLAGS_MASK) |
+			     ((ttl << NSH_TTL_SHIFT) & NSH_TTL_MASK),
+			NSH_FLAGS_MASK | NSH_TTL_MASK);
+}
+
+static inline void nsh_set_flags_ttl_len(struct nshhdr *nsh, u8 flags,
+					 u8 ttl, u8 len)
+{
+	len = len >> 2;
+	__nsh_set_xflag(nsh, ((flags << NSH_FLAGS_SHIFT) & NSH_FLAGS_MASK) |
+			     ((ttl << NSH_TTL_SHIFT) & NSH_TTL_MASK) |
+			     ((len << NSH_LEN_SHIFT) & NSH_LEN_MASK),
+			NSH_FLAGS_MASK | NSH_TTL_MASK | NSH_LEN_MASK);
+}
+
+int nsh_push(struct sk_buff *skb, const struct nshhdr *pushed_nh);
+int nsh_pop(struct sk_buff *skb);
+
+#endif /* __NET_NSH_H */