Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 465 insertions, 0 deletions

diff --git a/include/net/red.h b/include/net/red.h
new file mode 100644
index 000000000..425364de0
--- /dev/null
+++ b/include/net/red.h
@@ -0,0 +1,465 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __NET_SCHED_RED_H
+#define __NET_SCHED_RED_H
+
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <net/pkt_sched.h>
+#include <net/inet_ecn.h>
+#include <net/dsfield.h>
+#include <linux/reciprocal_div.h>
+
+/*	Random Early Detection (RED) algorithm.
+	=======================================
+
+	Source: Sally Floyd and Van Jacobson, "Random Early Detection Gateways
+	for Congestion Avoidance", 1993, IEEE/ACM Transactions on Networking.
+
+	This file codes a "divisionless" version of RED algorithm
+	as written down in Fig.17 of the paper.
+
+	Short description.
+	------------------
+
+	When a new packet arrives we calculate the average queue length:
+
+	avg = (1-W)*avg + W*current_queue_len,
+
+	W is the filter time constant (chosen as 2^(-Wlog)), it controls
+	the inertia of the algorithm. To allow larger bursts, W should be
+	decreased.
+
+	if (avg > th_max) -> packet marked (dropped).
+	if (avg < th_min) -> packet passes.
+	if (th_min < avg < th_max) we calculate probability:
+
+	Pb = max_P * (avg - th_min)/(th_max-th_min)
+
+	and mark (drop) packet with this probability.
+	Pb changes from 0 (at avg==th_min) to max_P (avg==th_max).
+	max_P should be small (not 1), usually 0.01..0.02 is good value.
+
+	max_P is chosen as a number, so that max_P/(th_max-th_min)
+	is a negative power of two in order arithmetics to contain
+	only shifts.
+
+
+	Parameters, settable by user:
+	-----------------------------
+
+	qth_min		- bytes (should be < qth_max/2)
+	qth_max		- bytes (should be at least 2*qth_min and less limit)
+	Wlog	       	- bits (<32) log(1/W).
+	Plog	       	- bits (<32)
+
+	Plog is related to max_P by formula:
+
+	max_P = (qth_max-qth_min)/2^Plog;
+
+	F.e. if qth_max=128K and qth_min=32K, then Plog=22
+	corresponds to max_P=0.02
+
+	Scell_log
+	Stab
+
+	Lookup table for log((1-W)^(t/t_ave).
+
+
+	NOTES:
+
+	Upper bound on W.
+	-----------------
+
+	If you want to allow bursts of L packets of size S,
+	you should choose W:
+
+	L + 1 - th_min/S < (1-(1-W)^L)/W
+
+	th_min/S = 32         th_min/S = 4
+
+	log(W)	L
+	-1	33
+	-2	35
+	-3	39
+	-4	46
+	-5	57
+	-6	75
+	-7	101
+	-8	135
+	-9	190
+	etc.
+ */
+
+/*
+ * Adaptative RED : An Algorithm for Increasing the Robustness of RED's AQM
+ * (Sally FLoyd, Ramakrishna Gummadi, and Scott Shenker) August 2001
+ *
+ * Every 500 ms:
+ *  if (avg > target and max_p <= 0.5)
+ *   increase max_p : max_p += alpha;
+ *  else if (avg < target and max_p >= 0.01)
+ *   decrease max_p : max_p *= beta;
+ *
+ * target :[qth_min + 0.4*(qth_min - qth_max),
+ *          qth_min + 0.6*(qth_min - qth_max)].
+ * alpha : min(0.01, max_p / 4)
+ * beta : 0.9
+ * max_P is a Q0.32 fixed point number (with 32 bits mantissa)
+ * max_P between 0.01 and 0.5 (1% - 50%) [ Its no longer a negative power of two ]
+ */
+#define RED_ONE_PERCENT ((u32)DIV_ROUND_CLOSEST(1ULL<<32, 100))
+
+#define MAX_P_MIN (1 * RED_ONE_PERCENT)
+#define MAX_P_MAX (50 * RED_ONE_PERCENT)
+#define MAX_P_ALPHA(val) min(MAX_P_MIN, val / 4)
+
+#define RED_STAB_SIZE	256
+#define RED_STAB_MASK	(RED_STAB_SIZE - 1)
+
+struct red_stats {
+	u32		prob_drop;	/* Early probability drops */
+	u32		prob_mark;	/* Early probability marks */
+	u32		forced_drop;	/* Forced drops, qavg > max_thresh */
+	u32		forced_mark;	/* Forced marks, qavg > max_thresh */
+	u32		pdrop;          /* Drops due to queue limits */
+};
+
+struct red_parms {
+	/* Parameters */
+	u32		qth_min;	/* Min avg length threshold: Wlog scaled */
+	u32		qth_max;	/* Max avg length threshold: Wlog scaled */
+	u32		Scell_max;
+	u32		max_P;		/* probability, [0 .. 1.0] 32 scaled */
+	/* reciprocal_value(max_P / qth_delta) */
+	struct reciprocal_value	max_P_reciprocal;
+	u32		qth_delta;	/* max_th - min_th */
+	u32		target_min;	/* min_th + 0.4*(max_th - min_th) */
+	u32		target_max;	/* min_th + 0.6*(max_th - min_th) */
+	u8		Scell_log;
+	u8		Wlog;		/* log(W)		*/
+	u8		Plog;		/* random number bits	*/
+	u8		Stab[RED_STAB_SIZE];
+};
+
+struct red_vars {
+	/* Variables */
+	int		qcount;		/* Number of packets since last random
+					   number generation */
+	u32		qR;		/* Cached random number */
+
+	unsigned long	qavg;		/* Average queue length: Wlog scaled */
+	ktime_t		qidlestart;	/* Start of current idle period */
+};
+
+static inline u32 red_maxp(u8 Plog)
+{
+	return Plog < 32 ? (~0U >> Plog) : ~0U;
+}
+
+static inline void red_set_vars(struct red_vars *v)
+{
+	/* Reset average queue length, the value is strictly bound
+	 * to the parameters below, reseting hurts a bit but leaving
+	 * it might result in an unreasonable qavg for a while. --TGR
+	 */
+	v->qavg		= 0;
+
+	v->qcount	= -1;
+}
+
+static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog,
+				    u8 Scell_log, u8 *stab)
+{
+	if (fls(qth_min) + Wlog >= 32)
+		return false;
+	if (fls(qth_max) + Wlog >= 32)
+		return false;
+	if (Scell_log >= 32)
+		return false;
+	if (qth_max < qth_min)
+		return false;
+	if (stab) {
+		int i;
+
+		for (i = 0; i < RED_STAB_SIZE; i++)
+			if (stab[i] >= 32)
+				return false;
+	}
+	return true;
+}
+
+static inline int red_get_flags(unsigned char qopt_flags,
+				unsigned char historic_mask,
+				struct nlattr *flags_attr,
+				unsigned char supported_mask,
+				struct nla_bitfield32 *p_flags,
+				unsigned char *p_userbits,
+				struct netlink_ext_ack *extack)
+{
+	struct nla_bitfield32 flags;
+
+	if (qopt_flags && flags_attr) {
+		NL_SET_ERR_MSG_MOD(extack, "flags should be passed either through qopt, or through a dedicated attribute");
+		return -EINVAL;
+	}
+
+	if (flags_attr) {
+		flags = nla_get_bitfield32(flags_attr);
+	} else {
+		flags.selector = historic_mask;
+		flags.value = qopt_flags & historic_mask;
+	}
+
+	*p_flags = flags;
+	*p_userbits = qopt_flags & ~historic_mask;
+	return 0;
+}
+
+static inline int red_validate_flags(unsigned char flags,
+				     struct netlink_ext_ack *extack)
+{
+	if ((flags & TC_RED_NODROP) && !(flags & TC_RED_ECN)) {
+		NL_SET_ERR_MSG_MOD(extack, "nodrop mode is only meaningful with ECN");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline void red_set_parms(struct red_parms *p,
+				 u32 qth_min, u32 qth_max, u8 Wlog, u8 Plog,
+				 u8 Scell_log, u8 *stab, u32 max_P)
+{
+	int delta = qth_max - qth_min;
+	u32 max_p_delta;
+
+	p->qth_min	= qth_min << Wlog;
+	p->qth_max	= qth_max << Wlog;
+	p->Wlog		= Wlog;
+	p->Plog		= Plog;
+	if (delta <= 0)
+		delta = 1;
+	p->qth_delta	= delta;
+	if (!max_P) {
+		max_P = red_maxp(Plog);
+		max_P *= delta; /* max_P = (qth_max - qth_min)/2^Plog */
+	}
+	p->max_P = max_P;
+	max_p_delta = max_P / delta;
+	max_p_delta = max(max_p_delta, 1U);
+	p->max_P_reciprocal  = reciprocal_value(max_p_delta);
+
+	/* RED Adaptative target :
+	 * [min_th + 0.4*(min_th - max_th),
+	 *  min_th + 0.6*(min_th - max_th)].
+	 */
+	delta /= 5;
+	p->target_min = qth_min + 2*delta;
+	p->target_max = qth_min + 3*delta;
+
+	p->Scell_log	= Scell_log;
+	p->Scell_max	= (255 << Scell_log);
+
+	if (stab)
+		memcpy(p->Stab, stab, sizeof(p->Stab));
+}
+
+static inline int red_is_idling(const struct red_vars *v)
+{
+	return v->qidlestart != 0;
+}
+
+static inline void red_start_of_idle_period(struct red_vars *v)
+{
+	v->qidlestart = ktime_get();
+}
+
+static inline void red_end_of_idle_period(struct red_vars *v)
+{
+	v->qidlestart = 0;
+}
+
+static inline void red_restart(struct red_vars *v)
+{
+	red_end_of_idle_period(v);
+	v->qavg = 0;
+	v->qcount = -1;
+}
+
+static inline unsigned long red_calc_qavg_from_idle_time(const struct red_parms *p,
+							 const struct red_vars *v)
+{
+	s64 delta = ktime_us_delta(ktime_get(), v->qidlestart);
+	long us_idle = min_t(s64, delta, p->Scell_max);
+	int  shift;
+
+	/*
+	 * The problem: ideally, average length queue recalculation should
+	 * be done over constant clock intervals. This is too expensive, so
+	 * that the calculation is driven by outgoing packets.
+	 * When the queue is idle we have to model this clock by hand.
+	 *
+	 * SF+VJ proposed to "generate":
+	 *
+	 *	m = idletime / (average_pkt_size / bandwidth)
+	 *
+	 * dummy packets as a burst after idle time, i.e.
+	 *
+	 * 	v->qavg *= (1-W)^m
+	 *
+	 * This is an apparently overcomplicated solution (f.e. we have to
+	 * precompute a table to make this calculation in reasonable time)
+	 * I believe that a simpler model may be used here,
+	 * but it is field for experiments.
+	 */
+
+	shift = p->Stab[(us_idle >> p->Scell_log) & RED_STAB_MASK];
+
+	if (shift)
+		return v->qavg >> shift;
+	else {
+		/* Approximate initial part of exponent with linear function:
+		 *
+		 * 	(1-W)^m ~= 1-mW + ...
+		 *
+		 * Seems, it is the best solution to
+		 * problem of too coarse exponent tabulation.
+		 */
+		us_idle = (v->qavg * (u64)us_idle) >> p->Scell_log;
+
+		if (us_idle < (v->qavg >> 1))
+			return v->qavg - us_idle;
+		else
+			return v->qavg >> 1;
+	}
+}
+
+static inline unsigned long red_calc_qavg_no_idle_time(const struct red_parms *p,
+						       const struct red_vars *v,
+						       unsigned int backlog)
+{
+	/*
+	 * NOTE: v->qavg is fixed point number with point at Wlog.
+	 * The formula below is equvalent to floating point
+	 * version:
+	 *
+	 * 	qavg = qavg*(1-W) + backlog*W;
+	 *
+	 * --ANK (980924)
+	 */
+	return v->qavg + (backlog - (v->qavg >> p->Wlog));
+}
+
+static inline unsigned long red_calc_qavg(const struct red_parms *p,
+					  const struct red_vars *v,
+					  unsigned int backlog)
+{
+	if (!red_is_idling(v))
+		return red_calc_qavg_no_idle_time(p, v, backlog);
+	else
+		return red_calc_qavg_from_idle_time(p, v);
+}
+
+
+static inline u32 red_random(const struct red_parms *p)
+{
+	return reciprocal_divide(get_random_u32(), p->max_P_reciprocal);
+}
+
+static inline int red_mark_probability(const struct red_parms *p,
+				       const struct red_vars *v,
+				       unsigned long qavg)
+{
+	/* The formula used below causes questions.
+
+	   OK. qR is random number in the interval
+		(0..1/max_P)*(qth_max-qth_min)
+	   i.e. 0..(2^Plog). If we used floating point
+	   arithmetics, it would be: (2^Plog)*rnd_num,
+	   where rnd_num is less 1.
+
+	   Taking into account, that qavg have fixed
+	   point at Wlog, two lines
+	   below have the following floating point equivalent:
+
+	   max_P*(qavg - qth_min)/(qth_max-qth_min) < rnd/qcount
+
+	   Any questions? --ANK (980924)
+	 */
+	return !(((qavg - p->qth_min) >> p->Wlog) * v->qcount < v->qR);
+}
+
+enum {
+	RED_BELOW_MIN_THRESH,
+	RED_BETWEEN_TRESH,
+	RED_ABOVE_MAX_TRESH,
+};
+
+static inline int red_cmp_thresh(const struct red_parms *p, unsigned long qavg)
+{
+	if (qavg < p->qth_min)
+		return RED_BELOW_MIN_THRESH;
+	else if (qavg >= p->qth_max)
+		return RED_ABOVE_MAX_TRESH;
+	else
+		return RED_BETWEEN_TRESH;
+}
+
+enum {
+	RED_DONT_MARK,
+	RED_PROB_MARK,
+	RED_HARD_MARK,
+};
+
+static inline int red_action(const struct red_parms *p,
+			     struct red_vars *v,
+			     unsigned long qavg)
+{
+	switch (red_cmp_thresh(p, qavg)) {
+		case RED_BELOW_MIN_THRESH:
+			v->qcount = -1;
+			return RED_DONT_MARK;
+
+		case RED_BETWEEN_TRESH:
+			if (++v->qcount) {
+				if (red_mark_probability(p, v, qavg)) {
+					v->qcount = 0;
+					v->qR = red_random(p);
+					return RED_PROB_MARK;
+				}
+			} else
+				v->qR = red_random(p);
+
+			return RED_DONT_MARK;
+
+		case RED_ABOVE_MAX_TRESH:
+			v->qcount = -1;
+			return RED_HARD_MARK;
+	}
+
+	BUG();
+	return RED_DONT_MARK;
+}
+
+static inline void red_adaptative_algo(struct red_parms *p, struct red_vars *v)
+{
+	unsigned long qavg;
+	u32 max_p_delta;
+
+	qavg = v->qavg;
+	if (red_is_idling(v))
+		qavg = red_calc_qavg_from_idle_time(p, v);
+
+	/* v->qavg is fixed point number with point at Wlog */
+	qavg >>= p->Wlog;
+
+	if (qavg > p->target_max && p->max_P <= MAX_P_MAX)
+		p->max_P += MAX_P_ALPHA(p->max_P); /* maxp = maxp + alpha */
+	else if (qavg < p->target_min && p->max_P >= MAX_P_MIN)
+		p->max_P = (p->max_P/10)*9; /* maxp = maxp * Beta */
+
+	max_p_delta = DIV_ROUND_CLOSEST(p->max_P, p->qth_delta);
+	max_p_delta = max(max_p_delta, 1U);
+	p->max_P_reciprocal = reciprocal_value(max_p_delta);
+}
+#endif