Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 532 insertions, 0 deletions

diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h
new file mode 100644
index 000000000..c429d6ddb
--- /dev/null
+++ b/include/rdma/rdma_vt.h
@@ -0,0 +1,532 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright(c) 2016 - 2019 Intel Corporation.
+ */
+
+#ifndef DEF_RDMA_VT_H
+#define DEF_RDMA_VT_H
+
+/*
+ * Structure that low level drivers will populate in order to register with the
+ * rdmavt layer.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/hash.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_mad.h>
+#include <rdma/rdmavt_mr.h>
+
+#define RVT_MAX_PKEY_VALUES 16
+
+#define RVT_MAX_TRAP_LEN 100 /* Limit pending trap list */
+#define RVT_MAX_TRAP_LISTS 5 /*((IB_NOTICE_TYPE_INFO & 0x0F) + 1)*/
+#define RVT_TRAP_TIMEOUT 4096 /* 4.096 usec */
+
+struct trap_list {
+	u32 list_len;
+	struct list_head list;
+};
+
+struct rvt_qp;
+struct rvt_qpn_table;
+struct rvt_ibport {
+	struct rvt_qp __rcu *qp[2];
+	struct ib_mad_agent *send_agent;	/* agent for SMI (traps) */
+	struct rb_root mcast_tree;
+	spinlock_t lock;		/* protect changes in this struct */
+
+	/* non-zero when timer is set */
+	unsigned long mkey_lease_timeout;
+	unsigned long trap_timeout;
+	__be64 gid_prefix;      /* in network order */
+	__be64 mkey;
+	u64 tid;
+	u32 port_cap_flags;
+	u16 port_cap3_flags;
+	u32 pma_sample_start;
+	u32 pma_sample_interval;
+	__be16 pma_counter_select[5];
+	u16 pma_tag;
+	u16 mkey_lease_period;
+	u32 sm_lid;
+	u8 sm_sl;
+	u8 mkeyprot;
+	u8 subnet_timeout;
+	u8 vl_high_limit;
+
+	/*
+	 * Driver is expected to keep these up to date. These
+	 * counters are informational only and not required to be
+	 * completely accurate.
+	 */
+	u64 n_rc_resends;
+	u64 n_seq_naks;
+	u64 n_rdma_seq;
+	u64 n_rnr_naks;
+	u64 n_other_naks;
+	u64 n_loop_pkts;
+	u64 n_pkt_drops;
+	u64 n_vl15_dropped;
+	u64 n_rc_timeouts;
+	u64 n_dmawait;
+	u64 n_unaligned;
+	u64 n_rc_dupreq;
+	u64 n_rc_seqnak;
+	u64 n_rc_crwaits;
+	u16 pkey_violations;
+	u16 qkey_violations;
+	u16 mkey_violations;
+
+	/* Hot-path per CPU counters to avoid cacheline trading to update */
+	u64 z_rc_acks;
+	u64 z_rc_qacks;
+	u64 z_rc_delayed_comp;
+	u64 __percpu *rc_acks;
+	u64 __percpu *rc_qacks;
+	u64 __percpu *rc_delayed_comp;
+
+	void *priv; /* driver private data */
+
+	/*
+	 * The pkey table is allocated and maintained by the driver. Drivers
+	 * need to have access to this before registering with rdmav. However
+	 * rdmavt will need access to it so drivers need to provide this during
+	 * the attach port API call.
+	 */
+	u16 *pkey_table;
+
+	struct rvt_ah *sm_ah;
+
+	/*
+	 * Keep a list of traps that have not been repressed.  They will be
+	 * resent based on trap_timer.
+	 */
+	struct trap_list trap_lists[RVT_MAX_TRAP_LISTS];
+	struct timer_list trap_timer;
+};
+
+#define RVT_CQN_MAX 16 /* maximum length of cq name */
+
+#define RVT_SGE_COPY_MEMCPY	0
+#define RVT_SGE_COPY_CACHELESS	1
+#define RVT_SGE_COPY_ADAPTIVE	2
+
+/*
+ * Things that are driver specific, module parameters in hfi1 and qib
+ */
+struct rvt_driver_params {
+	struct ib_device_attr props;
+
+	/*
+	 * Anything driver specific that is not covered by props
+	 * For instance special module parameters. Goes here.
+	 */
+	unsigned int lkey_table_size;
+	unsigned int qp_table_size;
+	unsigned int sge_copy_mode;
+	unsigned int wss_threshold;
+	unsigned int wss_clean_period;
+	int qpn_start;
+	int qpn_inc;
+	int qpn_res_start;
+	int qpn_res_end;
+	int nports;
+	int npkeys;
+	int node;
+	int psn_mask;
+	int psn_shift;
+	int psn_modify_mask;
+	u32 core_cap_flags;
+	u32 max_mad_size;
+	u8 qos_shift;
+	u8 max_rdma_atomic;
+	u8 extra_rdma_atomic;
+	u8 reserved_operations;
+};
+
+/* User context */
+struct rvt_ucontext {
+	struct ib_ucontext ibucontext;
+};
+
+/* Protection domain */
+struct rvt_pd {
+	struct ib_pd ibpd;
+	bool user;
+};
+
+/* Address handle */
+struct rvt_ah {
+	struct ib_ah ibah;
+	struct rdma_ah_attr attr;
+	u8 vl;
+	u8 log_pmtu;
+};
+
+/*
+ * This structure is used by rvt_mmap() to validate an offset
+ * when an mmap() request is made.  The vm_area_struct then uses
+ * this as its vm_private_data.
+ */
+struct rvt_mmap_info {
+	struct list_head pending_mmaps;
+	struct ib_ucontext *context;
+	void *obj;
+	__u64 offset;
+	struct kref ref;
+	u32 size;
+};
+
+/* memory working set size */
+struct rvt_wss {
+	unsigned long *entries;
+	atomic_t total_count;
+	atomic_t clean_counter;
+	atomic_t clean_entry;
+
+	int threshold;
+	int num_entries;
+	long pages_mask;
+	unsigned int clean_period;
+};
+
+struct rvt_dev_info;
+struct rvt_swqe;
+struct rvt_driver_provided {
+	/*
+	 * Which functions are required depends on which verbs rdmavt is
+	 * providing and which verbs the driver is overriding. See
+	 * check_support() for details.
+	 */
+
+	/* hot path calldowns in a single cacheline */
+
+	/*
+	 * Give the driver a notice that there is send work to do. It is up to
+	 * the driver to generally push the packets out, this just queues the
+	 * work with the driver. There are two variants here. The no_lock
+	 * version requires the s_lock not to be held. The other assumes the
+	 * s_lock is held.
+	 */
+	bool (*schedule_send)(struct rvt_qp *qp);
+	bool (*schedule_send_no_lock)(struct rvt_qp *qp);
+
+	/*
+	 * Driver specific work request setup and checking.
+	 * This function is allowed to perform any setup, checks, or
+	 * adjustments required to the SWQE in order to be usable by
+	 * underlying protocols. This includes private data structure
+	 * allocations.
+	 */
+	int (*setup_wqe)(struct rvt_qp *qp, struct rvt_swqe *wqe,
+			 bool *call_send);
+
+	/*
+	 * Sometimes rdmavt needs to kick the driver's send progress. That is
+	 * done by this call back.
+	 */
+	void (*do_send)(struct rvt_qp *qp);
+
+	/*
+	 * Returns a pointer to the underlying hardware's PCI device. This is
+	 * used to display information as to what hardware is being referenced
+	 * in an output message
+	 */
+	struct pci_dev * (*get_pci_dev)(struct rvt_dev_info *rdi);
+
+	/*
+	 * Allocate a private queue pair data structure for driver specific
+	 * information which is opaque to rdmavt.  Errors are returned via
+	 * ERR_PTR(err).  The driver is free to return NULL or a valid
+	 * pointer.
+	 */
+	void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp);
+
+	/*
+	 * Init a structure allocated with qp_priv_alloc(). This should be
+	 * called after all qp fields have been initialized in rdmavt.
+	 */
+	int (*qp_priv_init)(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+			    struct ib_qp_init_attr *init_attr);
+
+	/*
+	 * Free the driver's private qp structure.
+	 */
+	void (*qp_priv_free)(struct rvt_dev_info *rdi, struct rvt_qp *qp);
+
+	/*
+	 * Inform the driver the particular qp in question has been reset so
+	 * that it can clean up anything it needs to.
+	 */
+	void (*notify_qp_reset)(struct rvt_qp *qp);
+
+	/*
+	 * Get a path mtu from the driver based on qp attributes.
+	 */
+	int (*get_pmtu_from_attr)(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+				  struct ib_qp_attr *attr);
+
+	/*
+	 * Notify driver that it needs to flush any outstanding IO requests that
+	 * are waiting on a qp.
+	 */
+	void (*flush_qp_waiters)(struct rvt_qp *qp);
+
+	/*
+	 * Notify driver to stop its queue of sending packets. Nothing else
+	 * should be posted to the queue pair after this has been called.
+	 */
+	void (*stop_send_queue)(struct rvt_qp *qp);
+
+	/*
+	 * Have the driver drain any in progress operations
+	 */
+	void (*quiesce_qp)(struct rvt_qp *qp);
+
+	/*
+	 * Inform the driver a qp has went to error state.
+	 */
+	void (*notify_error_qp)(struct rvt_qp *qp);
+
+	/*
+	 * Get an MTU for a qp.
+	 */
+	u32 (*mtu_from_qp)(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+			   u32 pmtu);
+	/*
+	 * Convert an mtu to a path mtu
+	 */
+	int (*mtu_to_path_mtu)(u32 mtu);
+
+	/*
+	 * Get the guid of a port in big endian byte order
+	 */
+	int (*get_guid_be)(struct rvt_dev_info *rdi, struct rvt_ibport *rvp,
+			   int guid_index, __be64 *guid);
+
+	/*
+	 * Query driver for the state of the port.
+	 */
+	int (*query_port_state)(struct rvt_dev_info *rdi, u32 port_num,
+				struct ib_port_attr *props);
+
+	/*
+	 * Tell driver to shutdown a port
+	 */
+	int (*shut_down_port)(struct rvt_dev_info *rdi, u32 port_num);
+
+	/* Tell driver to send a trap for changed  port capabilities */
+	void (*cap_mask_chg)(struct rvt_dev_info *rdi, u32 port_num);
+
+	/*
+	 * The following functions can be safely ignored completely. Any use of
+	 * these is checked for NULL before blindly calling. Rdmavt should also
+	 * be functional if drivers omit these.
+	 */
+
+	/* Called to inform the driver that all qps should now be freed. */
+	unsigned (*free_all_qps)(struct rvt_dev_info *rdi);
+
+	/* Driver specific AH validation */
+	int (*check_ah)(struct ib_device *, struct rdma_ah_attr *);
+
+	/* Inform the driver a new AH has been created */
+	void (*notify_new_ah)(struct ib_device *, struct rdma_ah_attr *,
+			      struct rvt_ah *);
+
+	/* Let the driver pick the next queue pair number*/
+	int (*alloc_qpn)(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
+			 enum ib_qp_type type, u32 port_num);
+
+	/* Determine if its safe or allowed to modify the qp */
+	int (*check_modify_qp)(struct rvt_qp *qp, struct ib_qp_attr *attr,
+			       int attr_mask, struct ib_udata *udata);
+
+	/* Driver specific QP modification/notification-of */
+	void (*modify_qp)(struct rvt_qp *qp, struct ib_qp_attr *attr,
+			  int attr_mask, struct ib_udata *udata);
+
+	/* Notify driver a mad agent has been created */
+	void (*notify_create_mad_agent)(struct rvt_dev_info *rdi, int port_idx);
+
+	/* Notify driver a mad agent has been removed */
+	void (*notify_free_mad_agent)(struct rvt_dev_info *rdi, int port_idx);
+
+	/* Notify driver to restart rc */
+	void (*notify_restart_rc)(struct rvt_qp *qp, u32 psn, int wait);
+
+	/* Get and return CPU to pin CQ processing thread */
+	int (*comp_vect_cpu_lookup)(struct rvt_dev_info *rdi, int comp_vect);
+};
+
+struct rvt_dev_info {
+	struct ib_device ibdev; /* Keep this first. Nothing above here */
+
+	/*
+	 * Prior to calling for registration the driver will be responsible for
+	 * allocating space for this structure.
+	 *
+	 * The driver will also be responsible for filling in certain members of
+	 * dparms.props. The driver needs to fill in dparms exactly as it would
+	 * want values reported to a ULP. This will be returned to the caller
+	 * in rdmavt's device. The driver should also therefore refrain from
+	 * modifying this directly after registration with rdmavt.
+	 */
+
+	/* Driver specific properties */
+	struct rvt_driver_params dparms;
+
+	/* post send table */
+	const struct rvt_operation_params *post_parms;
+
+	/* opcode translation table */
+	const enum ib_wc_opcode *wc_opcode;
+
+	/* Driver specific helper functions */
+	struct rvt_driver_provided driver_f;
+
+	struct rvt_mregion __rcu *dma_mr;
+	struct rvt_lkey_table lkey_table;
+
+	/* Internal use */
+	int n_pds_allocated;
+	spinlock_t n_pds_lock; /* Protect pd allocated count */
+
+	int n_ahs_allocated;
+	spinlock_t n_ahs_lock; /* Protect ah allocated count */
+
+	u32 n_srqs_allocated;
+	spinlock_t n_srqs_lock; /* Protect srqs allocated count */
+
+	int flags;
+	struct rvt_ibport **ports;
+
+	/* QP */
+	struct rvt_qp_ibdev *qp_dev;
+	u32 n_qps_allocated;    /* number of QPs allocated for device */
+	u32 n_rc_qps;		/* number of RC QPs allocated for device */
+	u32 busy_jiffies;	/* timeout scaling based on RC QP count */
+	spinlock_t n_qps_lock;	/* protect qps, rc qps and busy jiffy counts */
+
+	/* memory maps */
+	struct list_head pending_mmaps;
+	spinlock_t mmap_offset_lock; /* protect mmap_offset */
+	u32 mmap_offset;
+	spinlock_t pending_lock; /* protect pending mmap list */
+
+	/* CQ */
+	u32 n_cqs_allocated;    /* number of CQs allocated for device */
+	spinlock_t n_cqs_lock; /* protect count of in use cqs */
+
+	/* Multicast */
+	u32 n_mcast_grps_allocated; /* number of mcast groups allocated */
+	spinlock_t n_mcast_grps_lock;
+
+	/* Memory Working Set Size */
+	struct rvt_wss *wss;
+};
+
+/**
+ * rvt_set_ibdev_name - Craft an IB device name from client info
+ * @rdi: pointer to the client rvt_dev_info structure
+ * @name: client specific name
+ * @unit: client specific unit number.
+ */
+static inline void rvt_set_ibdev_name(struct rvt_dev_info *rdi,
+				      const char *fmt, const char *name,
+				      const int unit)
+{
+	/*
+	 * FIXME: rvt and its users want to touch the ibdev before
+	 * registration and have things like the name work. We don't have the
+	 * infrastructure in the core to support this directly today, hack it
+	 * to work by setting the name manually here.
+	 */
+	dev_set_name(&rdi->ibdev.dev, fmt, name, unit);
+	strscpy(rdi->ibdev.name, dev_name(&rdi->ibdev.dev), IB_DEVICE_NAME_MAX);
+}
+
+/**
+ * rvt_get_ibdev_name - return the IB name
+ * @rdi: rdmavt device
+ *
+ * Return the registered name of the device.
+ */
+static inline const char *rvt_get_ibdev_name(const struct rvt_dev_info *rdi)
+{
+	return dev_name(&rdi->ibdev.dev);
+}
+
+static inline struct rvt_pd *ibpd_to_rvtpd(struct ib_pd *ibpd)
+{
+	return container_of(ibpd, struct rvt_pd, ibpd);
+}
+
+static inline struct rvt_ah *ibah_to_rvtah(struct ib_ah *ibah)
+{
+	return container_of(ibah, struct rvt_ah, ibah);
+}
+
+static inline struct rvt_dev_info *ib_to_rvt(struct ib_device *ibdev)
+{
+	return  container_of(ibdev, struct rvt_dev_info, ibdev);
+}
+
+static inline unsigned rvt_get_npkeys(struct rvt_dev_info *rdi)
+{
+	/*
+	 * All ports have same number of pkeys.
+	 */
+	return rdi->dparms.npkeys;
+}
+
+/*
+ * Return the max atomic suitable for determining
+ * the size of the ack ring buffer in a QP.
+ */
+static inline unsigned int rvt_max_atomic(struct rvt_dev_info *rdi)
+{
+	return rdi->dparms.max_rdma_atomic +
+		rdi->dparms.extra_rdma_atomic + 1;
+}
+
+static inline unsigned int rvt_size_atomic(struct rvt_dev_info *rdi)
+{
+	return rdi->dparms.max_rdma_atomic +
+		rdi->dparms.extra_rdma_atomic;
+}
+
+/*
+ * Return the indexed PKEY from the port PKEY table.
+ */
+static inline u16 rvt_get_pkey(struct rvt_dev_info *rdi,
+			       int port_index,
+			       unsigned index)
+{
+	if (index >= rvt_get_npkeys(rdi))
+		return 0;
+	else
+		return rdi->ports[port_index]->pkey_table[index];
+}
+
+struct rvt_dev_info *rvt_alloc_device(size_t size, int nports);
+void rvt_dealloc_device(struct rvt_dev_info *rdi);
+int rvt_register_device(struct rvt_dev_info *rvd);
+void rvt_unregister_device(struct rvt_dev_info *rvd);
+int rvt_check_ah(struct ib_device *ibdev, struct rdma_ah_attr *ah_attr);
+int rvt_init_port(struct rvt_dev_info *rdi, struct rvt_ibport *port,
+		  int port_index, u16 *pkey_table);
+int rvt_fast_reg_mr(struct rvt_qp *qp, struct ib_mr *ibmr, u32 key,
+		    int access);
+int rvt_invalidate_rkey(struct rvt_qp *qp, u32 rkey);
+int rvt_rkey_ok(struct rvt_qp *qp, struct rvt_sge *sge,
+		u32 len, u64 vaddr, u32 rkey, int acc);
+int rvt_lkey_ok(struct rvt_lkey_table *rkt, struct rvt_pd *pd,
+		struct rvt_sge *isge, struct rvt_sge *last_sge,
+		struct ib_sge *sge, int acc);
+struct rvt_mcast *rvt_mcast_find(struct rvt_ibport *ibp, union ib_gid *mgid,
+				 u16 lid);
+
+#endif          /* DEF_RDMA_VT_H */